Why the mega key Ad-on is disabled with FF9?

Why can't I access megaupload.com with FF9? it showed that "problem loading page"??? I dont understand because when I use FF8, it accessed normally.

Firefox 9.0 is a pre-release Beta version. That add-on probably hasn't been updated yet and the developer only supports full release versions of Firefox.

Similar Messages

TS3694 I bought the iphone 5 has not been one week do not understand why the home key of the time activities at stops working, not crash or fall. hope its help, probably due to software, not hardware failure, what do I do now?

I bought the iphone 5 has not been one week do not understand why the home key of the time activities at stops working, not crash or fall. hope its help, probably due to software, not hardware failure, what do I do now?

Restore iPhone with current iTunes on computer. See if better. If still problem, make Genius reservation or set up Service and take or send to Apple for resolution. Of if easier for you, take receipt and iPhone, box and everything and return to where you bought it.

Open message to Apple - why the **** do you force us to deal with this Genius Playlist crap if using iTunes Match?? GET AN OFF OPTION INSTALLED. I AM PAYING FOR MATCH SO QUIT FORCING YOUR INANE ATTEMPTS AT WHAT YOU THINK I LIKE!!!!!!

Open message to Apple - why the **** do you force us to deal with this Genius Playlist crap if using iTunes Match?? GET AN OFF OPTION INSTALLED. I AM PAYING FOR MATCH - SO QUIT FORCING YOUR INANE ATTEMPTS AT WHAT YOU THINK I LIKE ON ME !!!!!! YOU ALREADY HAVE THE OPTION WHEN MATCH IS OFF. HOW CAN YOU POSSIBLY THINK THERE IS A CONNECTION????? LET ME ME ME DECIDE!
IF anyone knows how to turn that Genius crap OFF WHILE MATCH IS 'ON' - Please let me know. Under 10.7
I HATE THESE PLAYLISTS - NEVER USE THEM- WASTES MY SCREEN REAL ESTATE..

At the moment it is not possible to disable Genius Playlists on iOS devices. However, these forums are user-to-user forums and no Apple employees participate here. You would be better to submit your polite feedback via the Apple Feedback page: http://www.apple.com/feedback/

Why the **** can I only sync my phone with one itunes program. Perhaps I have two computers with music on them that i'd like to add to my iphone,ipad,itouch,ipod. Fix this please thanks.

Why the **** can I only sync my phone with one itunes program. Perhaps I have two computers with different music on both of them that i'd like to add to my iphone,ipad,itouch,ipod. Fix this please thanks.

Becasue that is the way the ****** iphone is designed.
You can only sync with one ******computer.
There is nothing to ****** fix.
It is the ****** design of the iphone. It is ****** by design.

Why the tick "journalized data only" is disabled

i want to try CDC as guide describes.
but the tick "journalized data only" is disabled in grey.
i've imported and chose the JKM, please tell me the possible causes.
thanks.

Have you added the table to cdc and started the cdc with a subscriber?
Follow the instruction on physical Page 33 of the ODI User Guide.

HT1338 My MacBook Pro (running Leopard 10.5.8) won't allow keyboard to type an upper case 'C' using the shift key...works fine with caps lock, or, with my Typinator workaround using double-typed lower case c (not always best). Any ideas?

My MacBook Pro keyboard won't type an upper case 'C' using the shift key... only with caps lock. Workaround has been to use Typinator by typing a double lower case c, not always the best solution. Mac is a refurbished model, which initially was fine. Apple tech helped me correct the quirk when it first appeared, but now it has returned and refuses fixes. Any ideas?

I'm willing to bet that this has something to do with iCloud. I've been facing a frozen computer nearly every time I go into it.
In Activity Monitor I have seen two programs associate with iCloud that take up about 2.5 GB of memory (I only have 4 in the computer) -- causing everything to freeze. One of these is called "iCloud Helper" and the other one is something like "Address Book Sync helper" -- I see parts of these names in the stuff you have posted.
I am at my wits' end with these and have written to Apple asking them to do away with these or fix them. To get rid of the Address book sync thing I have gone into system preferences for iCloud and unchecked Contacts -- but then spontaneously it gets rechecked. And oftentimes after I Force Quit the iCloud helper, it spontaneously turns on again. My conclusion --- the iCloud is basically unusable. It turns a Mac into the most useless, clogged, sluggish PC. If this is happening to a lot of people's computers -- and I see no reason why yours or mine should be an exception -- these programs just might destroy Apple itself.
So -- I'm about to completely give up on iCloud, and I suspect that others will too unless this gets fixed.
Cheers,
Bob

Why the doc total amount is not matched with the total item line amount?

Hi,
Recently when i try to update something in sales order via my add-on, i got an error said u201CThere is a difference between the document total and its components. [ORDR.DocTotal][line: 0] Iu201D Then i checked the sales order in SAP B1, I found the document total amount was not matched with the item line total amount. Actually the item line is quite simple, there is only one item line with qty 1. How comes the document total could be different with the amount from item line? I know the document total amount is a read-only field which is calculated automatically by SAP. This is really weird for us, we don't know how this happened.
Has anyone experienced similar situation like mine and how this happens?
Thanks,
Lan

I am having this same issue and I have additional information.
I am on ver. 8.8 PL 16.
Periodically (mulitiple times a week), when a Sales Order is created, the Doc Total amount is -zero- when there are clearly items that have a price associated with them. This causes an error when Adding the document. Sometimes, I can just change the quantity of one of the items, which forces the Doc Total to update. Most of the time this does not work, though. I end up having to restart the SAP client and then everything begins to work as it should.
This behavior is occuring on mulitple machines in our office.
Earlier in this thread, Rahul mentioned that they currency rounding was turned off and that this could be part of the problem. In fact, we were having issues with Currency Rounding and did turn it off not long ago. Rahul, can you explain better what you meant by "give the proper amount so that you can overcome the error..."
Randy Davis
Denver, CO
Edited by: Randy Davis on May 16, 2011 2:01 PM

How to determine the exact key pressed when numlock disabled?

Hi there,
I am trying track the keyboardevent that triggered by pressing numpad keys as hotkey, but when the numlock is disabled, the same keycode, same keylocation was gotten as pressing in the standard keyboard. how can I determine if the numpad was pressed or the other control keys were pressed?
Thank you!
Andy

Hi there,
I am trying track the keyboardevent that triggered by pressing numpad keys as hotkey, but when the numlock is disabled, the same keycode, same keylocation was gotten as pressing in the standard keyboard. how can I determine if the numpad was pressed or the other control keys were pressed?
Thank you!
Andy

EMERGENCY ! please help me ! Why the OFF key would not boot me into the hp recovery partition ?

I bought a hp Pavilion dm4-2015dx for just over a week or so from Bestbuy.ca.
When I have tried to launch the recovery by pressing F11at the start up this morning, the following is display.
Windows failed to start. A recent hardware or software change might be the cause.............
file:\Boot\BCD
Statue:0cx0000225
info: an error occurred while attempting to read the boot configuration
Note: I recently did a partition, I divided up local discs C into A and B discs, I wonder if that has an effect on my computer?
Please help ! I only bought the laptop for just over a week
This question was solved.
View Solution.

Link I posted above to order Recovery Media doesn't work for me either. Thanks for confirming you have the same problem,Brent.
@zhuhr96
You are still under warranty and at least can use the phone number for free posted above by Brent.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Why the firefox android version is not working with lowend models

galaxy pocket version 2.3.6
pls fix the problem and get compactabile with lowend models

That link^ is a bit outdated as [http://www.mozilla.org/en-US/mobile/17.0/releasenotes/ mobile Firefox supports ARMv6 as of Firefox 17.0] and for [http://www.mozilla.org/en-US/mobile/19.0/releasenotes/ mobile Firefox 19.0 the requirement for cpu was reduced from 800MHz to 600MHz]. It is also recommended for the device to have 512+MB RAM at minimum still.

Why the extremely poor sound quality in playback with itunes?

I am having problems with the sound quality of itunes music. this applies to both downloads and cd's. This problem is new, I believe, and affects bluetooth speaker, earphones, and macbook pro internal speaker. All have extremely poor playback with itunes. This Problem does not happen with playback of youtube videos.
Thanks for any advice you can give.

I would be worth playing some tracks with Quicktime so see what the quality is like there.
iTunes uses Quicktime to play music.
Also check this Apple help on audio playback problems:
http://support.apple.com/kb/TS1362

MacBook stuck with shift key enabled and numbers not working - even the keyboard app in languages wont type lowercase nor numbers?! Anyone know whats up? no spillage...cant understand why the keyboard app wont do anything.

Anyone have a clue? I can understand the keyboard being broke / shift key being stuck but why in the world would I not be able to type the numbers on the language keyboard app on the operating system? Numbers show up on the app but when I press them I still get the special characters like #^&#* and it wont type lower case. Nothing has ever been spilt, just stopped working one day. Rebooted from Time Capsule restore dated a month ago and its still doing it. (problem started two weeks ago). Only way to get lower case or numbers to actually show up is the copy and paste.
Any help would be amazing!
Details on computer: 13 inch MacBook6, 1 (Late 2009) / Intel Core 2 DUO / 2.26GHZ / 2GB / Memory running Mac OS X Lion 10.7.5

If you can afford it, I would recommend replacing the topcase and keyboard as Apple suggests. If like me, you can't afford it or are open to a hack fix, then read on.
The problem
Yesterday, a little water spilt on my 13" MBP keyboard. I turned it around immediately, drained out the water and used tissue to suck it all up but the keyboard was still acting funny. I turned it off and left it out in the sun for a couple of hours and turned it on again but problems remained. Like Rickdubya, my warranty had run out just a month ago and I knew Apple would not cover this under warranty. I tried to clean the shift keys and left it overnight with some rice on them with hopes that the moisture might get sucked out. Nothing worked. (The rice bit is an urban legend that seems to work with some electronics). Went to the Apple Store this morning and was told that they wouldn't even take out the key and clean it, and that the entire top case would have to be replaced. A total bill of 156 Euros which I cannot afford. I had a USB keyboard that would let me use the Mac for the moment so I decided to try to work out a fix.
Symptoms
- Boots in safe mode everytime (which I later found out was because the shift key is pressed)
- Cannot login because password is in lower case or has numbers
- Cannot boot in super user mode and try to disable keys or override password as some commands won't work in uppercase (I wouldn't recommend this anyway because its super user mode)
- All text is in caps and numbers are symbols as though shift key is always pressed
- Audio doesn't work
- Keyboard viewer would not always show the shift key pressed. The key seemed to get pressed at random
Fix
1. Hold the Option button down on boot to bypass the Safe Mode ensure a normal boot
2. At the login screen, plug in a USB keyboard and enter your password to login
3. Change your password to one that uses all caps and no numbers
4. Download and install KeyRemap4MacBook .
5. Use a combination of the functionalities of the Keyboard Viewer and KeyRemap4MacBook to figure out which shift key is the problem. In my case, I found out that it was only my left shift key.
6. Disable the left/right shift key on KeyRemap4MacBook and click on the 'Reload XML' button to make that take effect.
If only one shift key was the problem, then you are done. If both shift keys were shorted, then its likely other keys are too. In which case you should probably just replace the entire thing. If you think other keys are not affected, then you can use KeyRemap4MacBook itself to remap the shift functionality to a lesser used key like the Left Option key.
7. Under System Preferences > Users & Groups > Login Items , add KeyRemap4MacBook as an application that should start on login. This will ensure that your disable/remap of the shift key is active everytime you login.
Usage change/Things to remember
1. Remember to hold down the Option key everytime the computer boots or reboots to bypass safe mode. The fix above is at the software level. The key is physically still shorted at the hardware level and will affect boot.
2. Remember that at the login screen, the disable/remap is not active. So your password now has to be all caps and only letters.
As soon as I can save some money, I will get my topcase and keyboard replaced but until then this solution works great with minimal change. Hope this helps!

Reasons why the E72 is NOT a 'smartphone'

Contrary to what Nokia says in its marketing blurb and what the dealer claims, the Nokia E72 (and by inference, others in its ilk) is NOT a 'smartphone' by any stretch of the mind. Yes, the E72 (and its predecessor the E71 and to a lesser extent the E63) are designs of beauty, good form factor, full QWERTY keyboard, brilliant screen, good camera and wonderful media compatibility features. But a 'smartphone' is more. The following are some reasons (having owned - and regretted big time - an E72 for the past 2 weeks:
1. Top of my complaints list is the fact that the E72 does not have a good desktop suite. The Nokia PC Suite that it ships with is a poor substitute. For one, it merely allows the phone's contents to be viewed on a PC screen; it does not allow for the phone's data to be viewed or manipulated offline. What this means is that the E72 must be connected to the PC for you to be able to see the contents. What a 'smartphone' needs is the ability for its desktop suite software to be able to be used even when the phone is not connected to the PC (ie offline). This requires a full copy of the phone's data to be stored on the PC and one is able to view, change, edit, etc this data.
Reasons why one wold want to work offline on the PC are many. Firstly, it lets you edit the data on the PC (much easier to work on a full PC than on an E72). You can input all your contacts data, etc on the PC then sync to the phone. Similarly, other data (such as diary events, notes, etc can be authored on a PC and then uploaded on to the E72. Additionally, one can use the PC Suite software as your main PIM (personal info management) software. But I suppose Nokia doesn't want people to be able to do that. What a shame, if that's what the modern day executive needs then he'll just go elsewhere.
Another reason why the PC Suite software should allow full data manipulation is ... what if your phone is lost, how would you access all your info (contacts, calendar events, memos, notes, etc)? Even if you have a daily backup, the Nokia user would actually need to acquire another phone (similar model or equivalent) and then do a restore. Until then, the backup file is of no use (because it cannot be viewed or manipulated). Such backup strategies (in proprietary flat files) are from the dark ages of computer technology! Nokia still believes it is cutting edge!
2. Nokia's PC Suite software is a joke. Not only does it require that the phone is connected to the PC for it to work, it actually handles data quite differently from the way the phone itself handles the same data! You can change the fields on the phone but not on the PC Suite, eg you can edit the field on the phone from "Mobile" to "Mobile 1", you can create a new field called "Mobile 2" but on the PC Suite, all you get is the standard "Mobile" and the second mobile field you create is not found! Wow, what synchronisation!
3. On the phone itself, a true 'smartphone' gives its user a multitude of options to do things his/her own way. In calendar events mode, I may want to set alarms 15mins before or 30 mins after! The E72 only allows before, that too only with a set of predetermined figures - ie I cannot set an alarm 23 mins before.
For some events, I may want to repeat the event and its related alarm on a weekly, monthly or annual basis. A professor may want to set a weekly alarm (starting from week 1 of the semester to week 14 of the semesster) for his lectures. Another person may want to set an alarm on a certain day of the month for his loan repayment to the bank. The Nokia allows you to set an annual anniversary alarm only. I cannot set an alarm for an event 3 days ahead (say, to give me advance notice to buy a present for a loved one!)
When editing calendar events, if you change a field but then decide to not keep the new figure, there is no option to cancel. Only the DONE button is present. You have to save (done) then re-edit the field. Silly.
Similarly the Snooze buttin ought to give the user flexibility to put the alarm off for any set of time. The phone may remind me of an upcoming event say 4 hours beforehand, I then need to put if off (snooze) for say an hour before it reminds me again. That's what a 'smartphone' does, remind you politely like an english butler!
4. The synchronising cable that Nokia ships with the E72 is another joke - its no longer than 6 inches long. Coupled with the requirement that the phone must be hooked up to the PC when doing any work on the PC Suite (see items 1 & 2 above), what if there is an incoming call? How do you answer the call with a 6 inche cable connecting the phone to the PC? Sure Nokia want's to make savings, but it should be practical.
The above are the main grouses that I have with the E72. As any reader can aappreciate, they are all related to the software side of the phone. At the moment - and with my unit being still new - I have not come across any issues related to the build quality. Yes the design of the battery cover seem flimsy. Its ok so far but I can see its not going to last that way for very long. Yes there is a bit of light leak directly under the Home key but I can live with it. The rear battery cover smudges easily and is a pain to keep clean, but hey, you can't have it all good.
But as far as the software side is concerned, yes, I do expect it to perform well in handling my data. We live in a modern world where most of us have an information overload in our daily lives. That's why we look forward to a 'business smartphone' - a device that is better than a personal assistant and one I can carry in my pocket. But when we have major global corporations such as Nokia promising you an 'advanced business smartphone' that actually falls three steps short, then I believe the public is being cheated for good.
I hope other readers would read this post and are better informed about what kind of device they'd be getting should they decide to purchase an E72. I also realise that Nokia may decide to edit (or even delete entirely) this post, but hey, if that happens, then I'd be promptem to post a copy of this review in a dozen other public forums.
Have a great day!
There ought to be laws out there on the use of the term 'smartphone'

You are correct, well done - it is my view.
But no, I am disabled and don't work for anyone, but I was a programming consultant.
If I'm buying or bought anything in the past such as an E71 or E72 then I make sure it can do what I need it to before hand. The E71 surpassed my requirements.
Mine came with a USB cable over a meter long, however I use bluetooth and need to do nothing - if my PC is on it knows my phone is there and visa versa without me doing anything (smart!).
The phone can access any of my PC files I require using the phone even when I am out and the PC is switched off. The phone tells me which bus stops to get off at and which way to go when I do. The phone can manage all my calls right down to tailoring for specific numbers and depending on my GPS location do different things. I can automatically order my repeat prescriptions from anywhere and watch live TV or stream my favourite radio stations wherever I am. I can use msn or any messenger, wherever I am - I could go on and on - my phone is definitely 'smart'.
Ovi is similar to PC suite but much more. You can sync contacts with the ovi server and then access them from any PC. I don't need that functionality so I don't know it very well but I have used it a few times. Ovi is Nokia's mobile web service, go to 'my nokia' to find out, its not difficult.
I have no need to read your post again, none of what you said justifies the heading you gave this thread.
If your beloved Palm is so great then go buy another one, why would we be bothered about them in this thread.
Bottom line is this, you have NOT given any good reasons why the E72 (or any E series phone) 'is NOT a smartphone'. What you believe we think about what is excellent is irrelevant.
E71-1(241.04) RM-346 300.21.012

Boot camp and windows XP..can't use the "option" key to dual boot

Hi All
I'm a Mac newbie, but I know LOTS about windows XP. I set up windows XP to run on my brand new (5 days old) macbook. I can use bootcamp to boot from OS/X to windows XP, and everything works well o both systems (I also loaded fusion, didn't like it cause I had to keep activating Microsoft Office 2007 everytime I switched from the VM to the bootcamp method of accessing XP).
My question..when I hold down the option key when I turn on the computer, only the Mac hard drive appears, not the windows...so, I boot into OS/X and then switch to windows from there. Any ideas why the option key only gives me the Mac HD option?
Thanks

In terms of AV, I'm running Mcafee AV and firewall, if that's any help knowing..I don't know if the AV changes any boot record, etc. Also, interesting when I go to the boot camp control panel when I am in windows, both "hard drives, Mac and windows" show up as folders. When I go to the control panel in the Mac OS, the Mac HD shows up as a hard drive, and the windows shows up as a folder. So...who knows!
As for using Vista vs. windows, well, I haven't worked much with Vista, but, since many of us that need windows use programs that may not reliably work with Vista, I have stuck with XP.
As for the use of Fusion, my point was this. I put the trial copy on and then loaded office 2007...each time I started the windows boot camp partition, or the fusion VM, I had to reactive Office 2007...this is a known problem in fusion VMware per their discussion board on the site. If you load fusion AND the fusion tools before activating Windows XP, then you only have to activate windows twice, once in bootcamp and once in fusion, but you have to look for the fusion tools and load them, they don't load by default.
Thanks for the OS dual boot software suggestion, I'll check it out...this is not a huge problem, but, when the Apple engineers respond to my question as "hmmm...we don't know"...I'm a bit concerned. So, as an old time windows user who just switched to Mac, my initial take it...both systems have their problems, just a different set of problems...but, so far I love my Macbook.

How can I obtain the primary key of a table for an entity relation?

hello everybody
I am doing a consultation to a table in my data base, good this table has alone two fields, the first one is the code or pk and the second one is the description, to be presisos they are names of city and code.
From the beginning!!: This method this one in another class that is a Dialog that is going to call to the class SelecPlace ();
SelecPlace sl = new SelecPlace();
public void capturarLugar(){ // Simple void method in the mentioned class
        String place = txtProcedencia.getText() ; // a JTextField
        sl.executeStatement(place) ;
    }ok, now we see part of the code of the class SelectPlace
public class SelecPlace extends AbstractTableModel{
    Connection con = null;
    Statement sentencia = null ;
    ResultSet rs = null;
    ResultSetMetaData rsmd = null ;
    String[] nameColum = {} ;
    Vector datos = new Vector() ;
    public SelecPlace() { }
    public void executeStatement(String query){
      try{
         con = DBManager.getConnection() ;
         sentencia = con.createStatement(rs.TYPE_SCROLL_INSENSITIVE,
                                                                      rs.CONCUR_UPDATABLE) ;
         String sql = "select * from Place where descripcion like %"+query+"%'";
          rs = sentencia.executeQuery(sql) ;
          rsmd = rs.getMetaData();
          int nroColumnas = rsmd.getColumnCount() ;
          nameColum = new String[nroColumnas] ;
          //obtengo los nombres de columnas en cache
           for(int colum = 0; colum < nroColumnas; columna++){
                nameColum[colum] = rsmd.getColumnLabel(columna + 1) ;
           datos = new Vector();
            while(rs.next()){
                Vector newRow = new Vector();
                for(int i = 0; i < getColumnCount(); i++){
                newRow.addElement(rs.getObject("place_ID"));
                newRow.addElement(rs.getObject("description"));
                datos.addElement(nuevaFila);
            fireTableChanged(null);
        }catch(SQLException e){
            System.err.println(e);
            e.printStackTrace(System.err);
            System.out.println("error in statement");
        }catch(ClassNotFoundException cnfe){
            System.err.println(cnfe);
    }Ok, this code me works and I obtain in this case the field description of the table Place
Now my question is, how can I obtain the primary field of my table?
I need this value of this field that in the base of information in a bigint, and to take it to the first class before mentioned, for that I am working with a data base related

Certain duffymo and everyone!!, good I give you my scheme:
And generalizing my question, I want to obtain the value of the primary key of a table in the database, I obtain more values of the same row, but I need the primary key, and you see one with the primary key I want to turn a Long and it to insert with code java in foreign clave in another table of the database
Good of this form I believe that it would not be breaking the integrity relacional of the tables

Why the mega key Ad-on is disabled with FF9?

Similar Messages

Maybe you are looking for