Why the microphone is detected but it doesnt sound?

Hello, i hope you can help me.
Yesterday i install adobe flash player 11 and everything was ok except for one thing. when i try to use the mic doesnt sound, i read in google but i cant make it work.

Are you using a microphone attached to your sound card or a usb microphone? Do you have any other options listed in the drop down menu?
Thanks,
Chris

Similar Messages

Does anyone know why the waveform peak detect function provides accurately the position of the peaks but not the value?

Does anyone know why the waveform peak detect function provides accurately the position of the peaks but not the value?
I have been looking at my data at the position indicated by the function as a peak, and it is correct at that place the wave has its peak, but the value provided by the function is higher than the actual value at that point.
Attachments:
Test.jpg ‏53 KB

The help makes it clear that the VI will make a quadratic fit to the data, so the locations are not integers (i.e. not aligned with you exact data). From that analysis, the peak is between two of your points, and slightly above the neighboring data.
See the coercion dot. Make the "locations" array DBL (Why did you change it to I64, that makes no sense at all!)
Quote from the help:
"Locations contains the index locations of all peaks or valleys detected in the current block of data. Because the peak detection algorithm uses a quadratic fit to find the peaks, it actually interpolates between the data points. Therefore, the indexes are not integers. In other words, the peaks found are not necessarily actual points in the input data but may be at fractions of an index and at amplitudes not found in the input array."
All clear?
LabVIEW Champion . Do more with less code and in less time .

I get the message Ipod detected but could not identify when i plugged in my new 7th gen Nano. Tried troubleshooting steps with no luck. Tried plugging in my old iPod and i get the same message.

I get the message "Ipod detected but could not identify"when I plugged in my new 7th gen nano. Tried troubleshooting steps with no luck, Treid plugging in my old iPod that worked fine and I get the same message.

Tried troubleshooting steps with no luck
Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps. How can I correct this?

My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps. How can I correct this?

If you are sure that you have sound in other apps - and if you can still hear keyboard clicks and get notifications, then system sounds are not muted. Try this and see if it works.
Close all apps completely and reboot the iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise

Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise

If the AX is working properly, it should not show up in your list of available networks (since it is "joined" to your router). Have you unplugged and replugged your AX? Unplugged and, after a minute, replugged your router? Do you have MAC address filtering enabled on your router? (if so, disable it to see if the AX works ... it will broadcast its MAC address to the router, and you can add it.) Is your firewall turned on? Turn it off and see if you can access Airtunes. You will have to open a port in your firewall if that is the case.
The AX should have the same network name as your router the wireless tab. When it shows up, what name is it broadcasting?

HT5312 ok so i forgot my security answers and now i cant buy any music at all ive tried to reset them from the apple id account but it doesnt let me

i just got my itunes card and was about to buy some music when it asked me for my security questions which i dont know and it ended up locking me out , i just unlocked it but i still cant answer the questions.ive had people tell me that i should go to my apple id account and it would give me a link to reset them there but it doesnt show up on mine what can i do?

The reset link will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account. If you aren't getting the link (you won't be able to add a rescue email address until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use

I have an iPad mini and the screen is black but it makes sound perfectly fine

I have a iPad mini and the screen is completely black but it makes sound perfectly fine

See here for Frozen or Unresponsive iPad
http://www.apple.com/support/ipad/assistant/ipad
tlend wrote:
I have a iPad mini and the screen is completely black...
Try this First... No Data will be Lost...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons..

Why the video playback stotter but audio is ok and all system resources are ok as well?

Hi,
I'm using Premiere Elements 12 and prepared a project using m2ts files of my sony camera. When I started the project, everything was find, editing easy. Now, some months later I wanted to finish the project on the same laptop ( Intel Cor i5-4200 2,50GHz, 8GB RAM, 64 bit Windwos 8.1, 1TB Hybrid HDD, dual graphic: Intel HD Graphics 4600 and NVIDIA GeForce GT740M). The system resources are not completly used during the playback, maybe 10 - 15% usage, RAM is between 20 and 50% usage, harddrive usage is between 10 and 40% usage. Video data are stored local on the harddrive (not on USB or network).
When I open the original files in e.g. VLC or Media Player the playback is perfect, no interupts. The playback of rendered elements in Premiere Elements is without interupts as well. Only "native", untouched HD material stotters after a short time I'm working on the project. It's the same for other videos, when I start a new project. It's anoying me because it was the reason why I decided for the SW.
I deinstalled Premiere Elements completly, used also CCleaner to remove unused registry entries... reinstalled it completly after some restarts... updated to 12.1.0.0 but after an afternoon of installation, the same issue is back.
Who can help me to fix it? Thanks for your feedback.

Player version 7.1.6 is a very old version but it should play H264 / AAC videos without issue.
http://support.apple.com/kb/DL837?viewlocale=en_US&locale=en_US a link for a more modern version.

Why the error in one, but not the other

Why does this code Generate the error:
Complex object types cannot be converted to simple values.
The expression has requested a variable or an intermediate
expression result
as a simple value, however, the result cannot be converted to
a simple
value. Simple values are strings, numbers, boolean values,
and date/time
values. Queries, arrays, and COM objects are examples of
complex values.
The most likely cause of the error is that you are trying to
use a complex
value as a simple one. For example, you might be trying to
use a query
variable in a <CFIF> tag. This was possible in
ColdFusion 2.0 but creates an
error in later versions.
The error occurred in
C:\Inetpub\wwwroot\2onboard\kBookList.cfm: line 40
38 : <tr>
39 : <td colspan="6">
40 : <cfif showList IS NOT "yearly"><a class="nav"
href=""> Yearly  </a>  </cfif>
41 : <cfif showList IS NOT "complete"><a class="nav"
href=""> Complete  </a>  </cfif>
42 : <cfif showList IS NOT "wish"><a class="nav"
href=""> Wish
List  </a>  </cfif>
CODE.........
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>2onboard.com - Kevin's Korner - Book
List</title>

<cfparam name="showList" default="complete">
<cfparam name="showOrder" default="title">
<cfparam name="showStatus" default="own">

<cfquery name="showList" datasource="2onboard">
SELECT
title,author,status,completed,pages,queue,rating,cover,series,book,link
FROM books
WHERE status = '#showStatus#'
ORDER BY '#showOrder#'
</cfquery>
</head>
<body>
<div id="container"> 
<cfinclude template="header.cfm"> 
<cfinclude template="explanation.cfm"> 
<div class="raised"> 
<b class="top"><b class="b1"></b><b
class="b2"></b><b class="b3"></b><b
class="b4"></b></b>
<div class="boxcontent">
<div class="boxcontenttext">
<table cellspacing="0">
<tr>
<td><span class="title">Kevin's
Korner</span><b> - Reading</b></td>
<td colspan="5"
align="right"><cfoutput> Library contains
<b>#showList.recordCount#</b>
books</cfoutput></td>
</tr>
<tr><td colspan="6"><span
class="spacetext"> </span></td></tr>
<tr>
<td colspan="6">
<cfif showList IS NOT "yearly"><a class="nav"
href=""> Yearly  </a>  </cfif>
<cfif showList IS NOT "complete"><a class="nav"
href=""> Complete  </a>  </cfif>
<cfif showList IS NOT "wish"><a class="nav"
href=""> Wish
List  </a>  </cfif>
</td>
CODE CONTINUES ON FROM HERE….
BUT, if I take just the bare minimum and test it as the
following, it works fine - WHY?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<cfparam name="showList" default="complete">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title> </title>
</head>
<body>
<cfif showList IS NOT "yearly"><a class="nav"
href=""> Yearly  </a>  </cfif>
<cfif showList IS NOT "complete"><a class="nav"
href=""> Complete  </a>  </cfif>
<cfif showList IS NOT "wish"><a class="nav"
href=""> Wish
List  </a>  </cfif>
</body>

> <cfparam name="showList" default="complete">
This line creates showList as a simple string variable
containing
"complete".
> <cfquery name="showList" datasource="2onboard">
This line redefines showList as a recordset containing the
data returned
from the database which is not a simple variable and can not
be accessed
with code such as <cfoutput>#showList#</cfoutput>
> <cfparam name="showList" default="complete">
This line does NOT redefine showList back to a simple string
because a
<cfparam ...> only fires if the variable does not
exist. The previous
two lines would create the variable, thus it exists.
jkgiven wrote:
> Why does this code Generate the error:
>
> Complex object types cannot be converted to simple
values.
>
> The expression has requested a variable or an
intermediate expression result
> as a simple value, however, the result cannot be
converted to a simple
> value. Simple values are strings, numbers, boolean
values, and date/time
> values. Queries, arrays, and COM objects are examples of
complex values.
>
> The most likely cause of the error is that you are
trying to use a complex
> value as a simple one. For example, you might be trying
to use a query
> variable in a <CFIF> tag. This was possible in
ColdFusion 2.0 but creates an
> error in later versions.
>
> The error occurred in
C:\Inetpub\wwwroot\2onboard\kBookList.cfm: line 40
>
> 38 : <tr>
> 39 : <td colspan="6">
> 40 : <cfif showList IS NOT "yearly"><a
class="nav"
>
href=""> Yearly  </a>  </cfif>
> 41 : <cfif showList IS NOT "complete"><a
class="nav"
>
href=""> Complete  </a>  </cfif>
> 42 : <cfif showList IS NOT "wish"><a
class="nav" href=""> Wish
>
List  </a>  </cfif>
>
>
> CODE.........
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> <title>2onboard.com - Kevin's Korner - Book
List</title>
>
> 
> <cfparam name="showList" default="complete">
> <cfparam name="showOrder" default="title">
> <cfparam name="showStatus" default="own">
>
> 
> <cfquery name="showList" datasource="2onboard">
> SELECT
title,author,status,completed,pages,queue,rating,cover,series,book,link
> FROM books
> WHERE status = '#showStatus#'
> ORDER BY '#showOrder#'
> </cfquery>
>
> </head>
>
> <body>
>
> <div id="container"> 
> <cfinclude template="header.cfm"> 
> <cfinclude template="explanation.cfm"> 
>
> <div class="raised"> 
> <b class="top"><b class="b1"><b
class="b2"><b class="b3"><b
> class="b4">
> <div class="boxcontent">
> <div class="boxcontenttext">
> <table cellspacing="0">
> <tr>
> <td><span class="title">Kevin's
Korner</span>
- Reading</td>
> <td colspan="5"
align="right"><cfoutput> Library contains
>
#showList.recordCount# books</cfoutput></td>
> </tr>
> <tr><td colspan="6"><span
class="spacetext"> </span></td></tr>
> <tr>
> <td colspan="6">
> <cfif showList IS NOT "yearly"><a class="nav"
>
href=""> Yearly  </a>  </cfif>
> <cfif showList IS NOT "complete"><a class="nav"
>
href=""> Complete  </a>  </cfif>
> <cfif showList IS NOT "wish"><a class="nav"
href=""> Wish
>
List  </a>  </cfif>
> </td>
>
> CODE CONTINUES ON FROM HERE?.
>
> BUT, if I take just the bare minimum and test it as the
following, it works
> fine - WHY?
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
>
> <cfparam name="showList" default="complete">
>
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> <title> </title>
> </head>
>
> <body>
>
> <cfif showList IS NOT "yearly"><a class="nav"
>
href=""> Yearly  </a>  </cfif>
> <cfif showList IS NOT "complete"><a class="nav"
>
href=""> Complete  </a>  </cfif>
> <cfif showList IS NOT "wish"><a class="nav"
href=""> Wish
>
List  </a>  </cfif>
>
> </body>
>
>
>

TS2326 why the sim card in my phone doesnt work and i can't call anybody while its unlocked phone and itsays no service after few minutes

I have an ipohne 4 and i have unlocked it at the moment im using T Mobile sim card and the signals apearsjust for few seconds and goes back to no service so i can't call any body while i call before it connects it just hangs up by it sel. why is that if ii could get some help to fix the problem thanks.

T-Mobile is not a supported iPhone carrier. Best to call them. But since they dont carry it, they will tell you to call Apple. In turn, will do nothing. T-mobile is terrible anyway.

I normally dont need a login when I install new program, but I try to Install a new flash player im asked to write a login and I have no clue? when I search for help it suggest to put in the original installation cd but that doesnt work. Please help!

When Trying to install the newest Flash player, Im asked to fill in my login.
I have no clue what my login is. (It happened very rarely that I was asked to fill in this when installing a new program, and the login I have used before are not valid now.
When I search for help, I am suggested to put in the original installation Cd.. and press the "C" button when I hear the starting sound... but when I do this nothing is happening.
Please Help me If you have an idea for a solution to this problem!
/ Joel

You need the admin password you created when you first set up the machine. Just about every installer running under OS X will require you to authorize the installation by entering an administrator password - even software update requires this. You really should not forget your admin password, as it is required for many things in OS X since, unlike Windows, you often need to manually type in the admin password to proceed with an install or update (whereas Windows will take admin authority, if you are logged in as an admin, by simply clicking continue or yes).
If you cannot remember your admin password, you can reset it from the recovery CD that came with your mac - http://support.apple.com/kb/HT1274

My ipad has no sounds. I tried everything that the internet community says but still no sounds even the apple technician where I bought it doesn't know why

Pls need your help badly. I tried everything that internet community suggested but still I don't have any sounds... I tried contacting tech personnel where I bought it but even they can't resolve my problem.. Sometimes I here sounds for 5 mins then puff it goes off again... Hope you can help me..

Hello bing5423,
The following article provides steps that can help get your iPad powered on again.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen

I updated my Mac now I cannot get my mail from the "postage stamp" It keeps saying the mail will repair but it doesnt.

I updated my Mac to Maver now i cannot retrive my mail from the "postagestamp" it tries to downlosd but Mail index has been damaged. Say it will repair itself next time I open mai.l B ut does not. Help!

Any luck ?

My iPod shows the "Do Not Disconnect" but it doesnt show up on iTunes.

I've restored it. I've updated it. It all started when I took all the songs off and tried to put them back on again. Can you help? PLEASE. And thank you.
iPod Nano Windows XP

many people have had this problem. Try to format the nano.
Instructions:
http://discussions.apple.com/thread.jspa?threadID=457362

HT1349 I have lost sound. It's ok with headphones and the ring tone works but otherwise no sound. I've restarted, checked the mute lock and bottom of page when right swiped etc and all no good. Any ideas

I've lost the sound on my I pad 2. It works ok with headphones but not without. Mute is definitely not on. Have restarted and reset. Any other ideas?

See this link - http://support.apple.com/kb/HT4085
Others have reported exactly like you but have since found that settings had changed!

Why the microphone is detected but it doesnt sound?

Similar Messages

Maybe you are looking for