Why the missing parts list changed after Pro.order released
I open a pro.order before released ,then I do the availability check get a missing parts list, this list including less parts than the missing parts after pro.order released ,why does it caused?which configuration caused?
Thanks,
Helai
Hi Lai,
You can do Material Availability check at the two stage of Production / Process Orders.
- First is to control (Check Missing Part) at the time of Order Creation.
T.code is OPJK - Select order type and Business Transaction -1 at the time of Order Creation
- Second is to control(Check Missing Part) at the of Order Relase.
T.code is OPJK - Select order type and Business Transaction - 2 at the time of Order release.
So it may possible that you have assign different checking group or checks to the above both stages , that's why you got different result regarding missing parts during above both stages.
Regards,
Dhaval
Similar Messages
-
How to reconstruct the missing parts list (co24)
Dear All
How to reconstruct the missing parts list (co24).by using report PPCOXPR1.?
Rgds
Pankaj AgarwalHi Pankaj,
You need to run the program "PPCOXPR1" using SE38. This program will create missing part index in RESB table.
Hope this helps you, Reward your points.
Regards,
Prasobh -
Material number changed after purchase order released
Hi Experts
Please we are experiencing this behavior in our system.
A purchase order for a specific material number is created and released, after this we can change the material number and its plant ¿is this a standard and right be way of SAP?
Thank for your help
JMHi,
You can design your process as the business demand.You can set Release Indicator 1 in designing Release procedure for PO , where release Indicator 1 is used for purchasing document cannot be changed/Change not allowed after release.
Regards,
Biju K -
Batch number change after Process order release
Hi all,
I would like to know if it is possible to change the batch number after that the process order has been released.
Actually, the field is grey and not editable anymore.
Is it customizing?
Thanks in advance,
Giovannihi
if the Batch numbers are generated while releasing the Process order. you cannot change the Batch number. (it will have inconsistency of data) -
Hi Team,
We are facing issue for availability check. During creation of Production order, the missing part list is not complete and it should show componenet A in the Missing part list. Below is the details:
Production Order quantity: 100 kg
Componenet A required quantity: 100 kg
MMBE Unrestricted qty: 1000 kg
MMBE Reserved Quantity: 2000 kg
So as per above figures component A should come as missing part during availability check. But it is not coming as missing part. Please check and give your inputs.Hello
The results of availability check should NEVER be compared with MMBE. As already mentioned, transaction CO09 is more appropriate.
Also, this issue has been already discussed on hundreds of threads in the past. See some examples below:
Problem with missing parts list during production order creation
issue in committing material for production order
Material Availibility check in Production orders
availability check
order is not released
As it is stated on the The SCN Rules of Engagement you should do some research before opening a thread. Therefore, please use the search tool or even google to search for similar problems before opening a thread.
BR
Caetano -
Missing Part list for Plant to Plant Purchase order
Hi,
I need the following requirement in CO24,
In CO24 its shows the missing parts for Sales order, similarly we want the missing parts list for Plant to Plant Purchase order in the same report. Also the report,
1.It should not consider the Planned order for a sales order.
2.It should not consider the planned order which can be convert into purchase requisition.
3.The procurement type should be "E" or "X".
Kindly guide me is there any standard layout changes in available or any development we have to do.
Thanks
Muthamil Murugan.GHi Purushothaman,
If you have the following settings in OPJK:
Plant XXXX
Order Type XXXX
Availability Check 2
[X]Status Check
[X]Check material availability when saving order (may not need)
Checking Rule PP PP checking rule
Component Check Type ATP check
Release material 2 Release permitted despite missing parts
Then in COHV you try to mass release the order with the following parameter:
List: Order Header
Selection: Your selection criteria
Mass processing:
Function: Release
Max. No.of Processes 99
Save Log: Always
Release control order: Collective Order Release
Then after the order is released, you can find the missing part list of that order in CO03 menu path:
Goto->Missing Parts->Missing parts list
Hope it helps.
Regards,
Rachel -
Co24 missing parts list does not show material with shortage
Dear All,
I have a following problem: a production order with status MSPR which has 2 components in the missing parts list from availability check (inside that PO).
In Co24 tcode system does not show any missing parts for the same production order.
For these missing parts i have shipping notifications with an exeption message 10: "bring process forward".
My question is why Co24 does not show missing parts while they are shown in the production order if click on ATP check button.
Is there any interconnection with expection messages to bring process forward?
Thanks for your help!
Regards, AndreyIt seems that at the stage when atp check was run last time there were no reciepts for missing parts. When i was doing ATP check in production order i didn't save results thus respective table was still containing old results.
After i saved results of ATP check in production order missing parts were dispayed in Co24 as expected. -
Hi Guru's,
When we checked the missing part list in the "COOISPI "report (Process Order infromation system) for the planned order and compared this with the missing parts in the MD12 for the particular planned Order, there was a differnece in number of entires (components) betwwne both these lists. why is the missing part list for MD12 and COOISPI is showing the difference?
If anyone is familiar with this report please let me know what can be the reason for the difference. also can any explain the logic how this report does the availability check for the missing parts.
Thanks,
Nagesh.Dear Nagesh,
1) For missing parts at plan order level check in MDVP ( Not in COOISPI )
2) Compare MDVP with MD12
3) AV check will carried out based on settings defined in OPJJ ( Combination of cheing group & checking rule )
Regards
Madhu Kumar -
Missing Part List !!
HI
Is there any std report to see the missing part list.
I mean material issued to prod order and we wana see the shortage.
Thank Youin co11n or co15--from menu --u can check for any missing parts against prod. order..
-
Hi,
We would like to send the missing parts list generated from CO24 to other system. Is there any standard IDOC available to send missing parts?
I would appreciate your help.
Thanks.Karthik,
Thanks for your quick reply. But this is not what I am looking out for. I am sorry, I think my question was not clear.
There is one functionality in Production Planning area that we can find out the missing parts for the production order. We have to send the information to our warehouse asking for the missing parts to fulfill the production order. Our warehouse is not on SAP so we want to send the information through an ALE/IDOC. In order to do this I wanted to know that is there any standard IDOC type which can be used or we have to create a custom IDOC.
Thanks. -
Missing part list in plant maintenance ( CO 24)
Hi SAP experts,
Is it possible to use the transaction CO24 ( missing part list) for plant maintenance orders? If yes, what are prerequesites & configurations needed for it?
RegardsHi,
I think CO24 can be used for Maintenance Orders too.... as there is no order category field mentioned in the selection screen.
Try for one the PM order and check ... currently I don't have any PM order other wise I would have checked and let you know....
Hope thsi will help you.
regards
radhak mk -
Hi All,
Till last week the missing parts list for a particular MRP controller showed many parts but since this week it only shows some parts and we are not able to find out the difference between what is expected and what it is showing.
Can somebdy guide me through the exact process how it searches for missing parts through Availability check.
Thanks
Shailesh.Dear Shailesh
Last week there might be No stock for componets, so system might have shown many componets list
but this week, enough stock might be availble for componets, so system is not showing missing parts
just check in MMBE for required components stock
Regards
kumar
Edited by: kumar kumar on Sep 9, 2009 12:26 PM -
Missing parts list at planned order level
I have tried to use comac t-code for checking the missing parts list at planned order level. but no log has been generated. pls advise. Is there any way to do the same?
Hi,
Use MDVP, i think it should meet your need.
If helpful award points
Regards,
Vivek -
"missing part list" releasing process order, but the material there is
Hi dears,
Ive a strange problem.
When im going to release a process order, the system give me a missing part list.
The strange is the material indicated in that list, a component of a phantom, is present in state free in the st. location indicate.
Does anybody know what can be the problem?
Thanks in advance,
JuanHi all,
the problem was that the material was present in quantity lower than safety stock.
For this reason, the system give me that advice.
however thanks for the help.
Best regards,
Juan -
My iPhone won't redial calls on the missed call list, why?
My iPhone won't redial missed phone calls from the missed call list, why?
Typically the way the sync you're trying to achieve is performed is to do the following on both your iPhone and iPad (assuming they have the same Apple ID):
Go to Settings > iTunes & App Stores and turn on "Books".
From that time on, books purchased on one device (then or later) will appear on the other.
Maybe you are looking for
-
ADF 11g can not select and copy data from cell of readonly table in IE
hi, In ADF 11g, when render view object as readonly table with Single RowsSelection, using IE browser can not select and copy data from the cell, but it work in firefox. is it a bug? Edited by: kent2066 on 2009-5-18 上午8:46
-
How to install bo xi 3.1 on windows server 2008 r2 sp1 (virtual machine )
HI GUYS -- operating system: I am trying to install Business Objects into a virtual computer which has a windows server 2008 R2 SP1 operating system. I installed version BO XI 3.1 and I also installed Service pack 3 and Service pack 4. I installed l
-
Hi, I have problem with build splashy. I turn on logging for that but i don't know what is the problem. ++ pkgname=splashy-full ++ pkgver=20130302 ++ pkgrel=3 ++ pkgdesc='A boot splashing system' ++ arch=('any') ++ url='http://anonscm.debian.org/gitw
-
Upgrade from 3G 8GB to 3GS 16GB iphone
I currently have an iphone 3G 8GB and have been given to opportunity to upgrade to a 3GS 16GB. How simple is it to transfer everything from my current iphone to the new one? HAs anybody had any issues with this if so I would like to hear them.. Also
-
Iphoto 11 + pse 9 editing
I have iphoto 11 pse 9 ,when I edit using pse as external editor and save simply clicking save ( not save as) when I try to reopen the photo a big black exclamtion mark appears. What's happening?