Why the network link LED always off for all B200 blade servers? is it normal or heathy?

Hi Expert,
Why the network link LED always off for all B200 blade servers? is it normal or heathy? refer to the installation document, it means no active network connection. However, all these servers are up and running with netwirk connection. anyone could explain this?

Hi Tabish,
How many times do you have to open this same topic?
In my opinion, this is your THIRD thread for the same topic.

Similar Messages

Network link LED on UCS blades

Hi,
we got a working UCS system (6248 FI , 5108 chassis with 2204 IOM and B200-M3 blades) all is working fine but the network link LED are off. Is this a normal behaviour ? Since according to documentation they should blink green.
regards

Hi Lukasz,
I'm assuming we are speaking about the network LED 's on the IOM which are off.
What about the LED's on the respective ports on the FI?
What's the color of the LED's on the power supplies?
Thanks,
Majid

Bought 4th Gen 3TB TC - streaming TV over the internet is now so slow and now is constantly buffering. It seems the Airport Utility is always 'searching for new networks' - don't know if this is the problem. It's not the internet speed as checked that.

Bought 4th Gen 3TB TC - streaming TV over the internet is now so slow and now is constantly buffering. It seems the Airport Utility is always 'searching for new networks' - don't know if this is the problem. It's not the internet speed as checked that. I took my old router upstairs and was streaming TV via my ipad seamlessly - the same program via the TC was constantly buffering.
I just expected to be able to plug in the TC, so a simple set-up and experience wireless both upstairs and downstairs in my house. For some reason the range is low and speed veru disappointing.
I am far from being an IT expert but I would welcome advice about setting up this TC so we can enjoy the product as it was designed. Please HELP!

No silver bullet........but my suggestions may drive you in the right direction.
1. Unplug the power cable from the TC and wait 10-15 minutes before powering back up.   Seriously wait!
      Proceed to #2 if this dosen't help.
2. Unplug the power cable from the TC, ubplug the power cable from your Broadband Modem (assuming it's a cable modem), disconnect ethernet, and cable from modem.
2a. Wait 10-15 minutes then re-connect cable, ethernet, and power back to modem (your modem should power up unless you have a power switch) wait for all the modem lights to come on EXCEPT activity.
2b. Connect ethernet from modem to TC, and plug in the power cable to TC.
      Proceed to #3 if this dosen't help.
3. Reconfigure the TC.........Read here........http://support.apple.com/kb/HT3728
All really simple to do....if you need additional help let me (us) know.

I've tried safe mode but I dont understand what is happening. I tried pressing the power button on and off for several times and nothing happens, I'm always stuck on an apple logo and a spinning wheel. I dont know how to get to the Partition and the DiskU

I've tried safe mode but I dont understand what is happening. I tried pressing the power button on and off for several times and nothing happens, I'm always stuck on an apple logo and a spinning wheel. I dont know how to get to the Partition and the DiskUtility. The Apple Logo and the Progress Indicator will continue to spin and I have literally no idea what to do. i am in desperate need of help. help me pls

Turn it off.
Start it up again and (at the sound of the chime) press and hold the command and the R keys, hold them down until Recovery loads. When it does you will select Disk Utility and you should be on the First Aid tab when it opens, if you are not please select it. Then select the partition (in the side bar, 2nd entry on the list, see picture).
Yours is probably called Macintosh HD.
Once you have selected it go to the lower righthand corner of the First Aid dialog and press Repair Disk.
This will take 10 minutes approximately. Post back when it is finished and tell me what it says.

I've tried safe mode but I dont understand what is happening. I tried pressing the power button on and off for several times and nothing happens, I'm always stuck on an apple logo and a spinning wheel. I dont know how to get to the Partition

I've tried safe mode but I dont understand what is happening. I tried pressing the power button on and off for several times and nothing happens, I'm always stuck on an apple logo and a spinning wheel. I dont know how to get to the Partition and the DiskUtility. The Apple Logo and the Progress Indicator will continue to spin and I have literally no idea what to do. i am in desperate need of help. help me pls

Reboot hold the command R for recovery.

Green LED always off when iSight is in use

Hello,
I have a 15'' MacBook Pro since June. The green LED next to the iSight -almost- never works when I am using the camera either with Photo Booth or the Mirror widget.
I said 'almost' because I remember that it lit up during the first startup of the computer when it wanted to take a picture of me.
Then it was always off for several days.
Then I installed the Mirror widget and started playing with it, activating, deactivating it, and then once I started Photo Booth and - surprise!- the green LED went on.
A few minutes later it went off. I could reproduce the same procedure a few times (open the mirror widget and play with it, e.g. change the resolution, and the LED went back on). That trick is not very reproducible and the LED always turns off after a while. I have not been able to turn it back on for weeks.
Otherwise the camera works fine.
What could be wrong? Software? Hardware? Any idea?

Yes, that is puzzling. I can't say what could be happening with yours, but we tried five Macbook pros at a meeting today and none behaved like yours. All showed the light whether the AC adapter was connected or not. We tried Photo Booth, iChat and iMovie.
Have you run Hardware Test?
Webb

A tech company just set up a wifi network in my house and does not use my existing TC; how do I get it in the network to serve as backup for my iMac? (I don't need it as a wifi access point anymore)

a tech company just set up a wifi network in my house and does not use my existing TC; how do I get it in the network to serve as backup for my iMac? (I don't need it as a wifi access point anymore) thanks

Just bridge the TC and plug it by ethernet into the main router.
Bridge in v5 airport utility.
In v6 it is under network.. change it from DHCP and NAT to Off bridge mode.
Turn off the wireless.

All of a sudden, the radio signal LEDs went off and node went dead

In order to change the I/O variable data type of my node from single to array of single, I simply press and hold the rest button on WSN-3202 for 7seconds. At the end of it, the radio signal LEDs went off and node went dead. All attempt to bring it back to life proof abortive. What should I do?
Blessing

Hi Blessing,
If you've tried everything to get it working, including a fresh set of batteries or direct power from an adaptor, then you should contact your local NI branch regarding the repair process. The contact information for your branch can be found on http://sine.ni.com/apps/utf8/nicc.call_me.
Regards,
Imtiaz Chowdhury
Head of Digital Technologies
Brand786

Why the Podcast stops when screen off? (iOS6)

Why the Podcast stops when screen off? (iOS6)

iHeartRadio is an app from an independent vendor. It is not from Apple, and Apple can't do anything to fix a broken app. Contact Clear Channel, the developer.

I turned iCloud back up off for all the games on my iPad, now i want to turn it back on but, now they have all disapeared from my apps in iCloud, how do i turn the back up on those specific apps back on?

i turned iCloud back up off for all the games on my iPad, now i want to turn it back on but, now they have all disappeared from my apps in iCloud, how do i turn the back up on those specific apps back on?
I'm trying to get them to transfer to another iPad for my kid.

atoo2 wrote:
I just did the IOS8 update on my Ipad retina which had 300 photos it asked me to do an iCloud back up which i did but it deleted all my previous photos and now i only have recent photos how do i get back all my old photos? It said befor that my icloud was out of storage but i didnt know it didnt have my old photos, they arnt back up on itunes either is there any way I can get them back?
Please see the bold. If you're out of icloud storage, then you won't be able to backup to icloud unless you purchase more storage, but yet you said you backup to icloud.
If you really did backup to icloud no data would be loss - sounds to me that it didn't backup since you had no more free icloud storage space.
iCloud: iCloud storage and backup overview

I got a new ipad2 for Christmas and I am unable to get it to accept my password for my wifi. I am using the same password that I have always used for all of my other devices. Can somebody help me????

I got a new ipad2 for Christmas and I am unable to get it to accept my password for my wifi. I am using the same password that I have always used for all of my other devices. Can somebody help me????

Hi there
I had the same trouble today, I kept entering the sky password but would not accept, my iMac and iPod work ok but just could not get my iPod to work. But I found the fault, the password is case sensitive and mine on sky is in caps, the up arrows on the keypad put the caps on,but after each letter you must put the caps back or it wil revert to lower case, I hope this may help you

I was using a different itune id and now a new one but when i want to update the old app its always asking for my old app id. Is there a way to change my old app to my new id so that i dont have to use my old id.

I was using a different itune id and now a new one but when i want to update the old app its always asking for my old app id.
Is there a way to change my old app to my new id so that i dont have to use my old id?

There is no other way you can do now. Actually, you don't need to create a new Apple ID account, you can change the Apple ID from old email account to other email accout easily by all the steps below.
1, Open iTunes > iTunes Store > log in old Apple ID > Click on your apple ID on the right hand side on top > choose account > Apple ID > Edit
As long as you only change your Apple ID, then all the old apps are still under your new email account as well as you can keep downloading new apps.

Why the apple store is so expensive and why the apple users can't access for free after spending huge amount in apple phone ?

Why the apple store is so expensive and why the apple users can't access for free after spending huge amount in apple phone ?

The Apple store is correct. The warranty is not international, and Apple will not accept or return iPhones shipped from a different country. You need to ship the phone to somebody in Hong Kong who can take it in to Apple for repair, or pay a third party repair shop in the Philippines to fix it.

TS1702 why the **** facebook app is not available for ipod 1gen v3.1.3?

why the **** facebook app is not available for ipod 1gen v3.1.3?

Thanks for sharing an alternative solution for the time being.
B-rock

Connecting my Sony BD player to my MacBook Pro wireless network. It sees the network but it then asks for a WPA security key. Where do I find this key?

Connecting my Sony BD player to my MacBook Pro wireless network. It sees the network but it then asks for a WPA security key. Where do I find this key?

Hi Michael,
It sounds like your router's authentication is set to WPA and thus where the key is established. Does your MacBook Pro connect to a wireless router? If so, that's where you'd need to get the key from via a web-based control panel for the router or if it's an AEBS via AirPort Utility.

Why the network link LED always off for all B200 blade servers? is it normal or heathy?

Similar Messages

Maybe you are looking for