Why the oldest recorded track get recorded again when making new track?

1. I play my guitar and record it (track1)
2. I play track1 and recording my vocal
3. The track1 get recorded again on my vocal track
How to set off that? So i dont have double sound of the oldest track on the new track

Kaibe008 wrote:
3. The track1 get recorded again on my vocal track
How to set off that?
use headphones

Similar Messages

  • I need to update specific records(of variable lengths) in a file. I can get the correct record but when I update it(add info), it overwrites part of the record following it. I am using labview 6.0

    I need to update specific records(of variable lengths) in a file. I can get the correct record but when I update it(add or change info), it overwrites part of the record following it. I am using labview 6.0. I need to be able to insert information into the middle of a file without disturbing the data before and after

    It's hard to give more specifics without more detail, but in general you're going to need to read in the entire file, split it into three pieces (everything before the record of interest, the record itself, and everything after the record of interest), modify the record, reassemble the three pieces in proper order, and write the whole thing back to the file.Of course if the file is very large you might not want to actually implement it this way, but conceptually at least, this is what you are looking at.If this file some sort of proprietary format?Mike...PS: this type of issue is why I really like databases...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Why the iphone 4 does not have sound when I watching the recorded video?

    why the iphone 4 does not have sound when I watching the recorded video?

    Have you turned up the volume?
    Try the buttons, or the bottom audio slider.
    Does your phone normally play audio?
    And have you tried to record and audio note to check if your microphone is not faulty.

  • Why are my Illustrator images getting thicker strokes when I take the bounding box and make them smaller?

    Why are my Illustrator images getting thicker strokes when I take the bounding box and make them smaller? This has never happened to me. I'm not an expert at Illustrator, but I do know some fundamentals.

    Thank you for responding so quickly. No apologies necessary - I know this Forum isn't McDonalds - don't expect an answer to be served up right away. You helped me out with a big issue yesterday.
    I am using a mac - OSX 10.7.5
    I have Adobe Creative Suites - CS5 - Illustrator version is 15.0.2
    The contents I am placing are all  Vector - Illustrator files
    But, I wonder about some of the vector files I work with.  Could a "line weight/thickness" be 'assigned' to the drawing and screw things up? I used 'simple' linear (line) drawings from SolidWorks that have been converted to ai files. It's just weird because I checked the stroke of the drawing and it's not out of line.
    I am attaching part of some box labels. You can see how the drawings, of the products, on the 'left side' are "thick" after embedding them. I think the "Global Logo" was pasted into a template not linked that's why it's okay. But look at the Quiet Thunder logo - it looks terrible. These labels are only 2.25" X 6.5", so its important I keep the images lightweight. 
    Your help is very much appreciated. Thank you!

  • Why does my form data gets cleared out when clicking on the back button.

    Can someone explain why does my form selections get cleared out when clicking on the back button.
    I have a JSP page that displays a form with some selections and text boxes. I populate the page and submit the request. The action on the submit call another jsp page, which processes the data and displays the results via a <jsp:include> statement which calls the results page. When clicking on the back button from the results page, it returns me to the form page, but the selections are cleared out.
    1. Is there something in my calling of the pages that causes this behavior and can I prevent it?
    I notice that the behavior is different when using the IE 6.0 version Netscape 7.1. IE clears the page Netscape 7.1 retains the settings.
    If I cannot prevent this behavior does that mean I will have to save the state of the form data. And if I have to save the form data, what would be the easiest method of doing this. I'm a beginner to JSP and Java, but have some ASP experience. I don't understand why the back button in a JSP request clears the form data but a regular HTML page does not can someone explain?
    THANKS.

    the browser doesn't have to remember what you submitted and fill that back in.
    you can't prevent it unless you can ensure a new request to the server in which you can fill the default values in there.

  • Why does my email address get messed up when people hit reply sending from Mac Mail 4.6

    Why does my email address get messed up when people hit reply sending from Mac Mail 4.6
    OSX 10.6.8

    I talked to our email provider and they say it has to do with the way thre recipients email address book has recorded the address. They say that they need to fix the address on their end.

  • Will re-install of System Solve "Getting "try again" when installing..."

    Have yet to solve "Getting "try again" when installing software..." posted yesterday. Also note inability to perform Safe Boot. Will re-installation of System software (Tiger) restore the functions lost?
    If I'm obliged to do this, any tips on how to: 1) preserve my Internet settings, including Bookmarks; 2)saved (not yet deleted) emails; and (3) my Address book? Where are they? how do I identify these files? Can I do some sort of backup before I go to Install?

    For the convenience of others, here is the list to the other topic:
    http://discussions.apple.com/message.jspa?messageID=9414774#9414774
    The basic problem appears to be disk directory corruption. It is very unlikely reinstalling the OS will cure that since you also appear to want to preserve all your files. In fact, reinstalling the OS might create more damage to your files since the computer has lost track of some of them and might just overwrite them not knowing they are there.
    You either need to try to repair the directory using Diskwarrior (since DU apparently failed), or you need to wipe the drive (and all your files) then reinstall your OS. If doing the second option you should, of course, back up your data files first. However I can't help but feel when people mention backing up a damaged directory that your backups may be incomplete since, again, the computer has lost track of some parts of the files and may not make a complete copy. If I was in your situation, and could afford it, I'd go for getting a copy of Diskwarrior so you can actually repair your drive. If I couldn't afford it I would back up my data files, wipe the drive, then reinstall everything again from scratch, then copy the data files back on and keep my fingers crossed that none of them was part of the corruption.

  • Photo stream just reached 1000 pictures and is not rolling the oldest pictures off.  It just stopped adding new ones.  Any ideas?

    Photo stream just reached 1000 pictures on my iphone 4S and is not rolling the oldest pictures off.  It just stopped adding new ones although I see new pictures in my photo album.  Any ideas?

    Check that you have installed the 5.0.2 patch:
    http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=3569&fileID=3369

  • I have the problem of calls getting failed.. Black Iphone 4S 16gb IOS 6.1.3. O2 Network.  Airtel India.     I have full bars of signal but cannot  make calls. Goes to "No service" then to "searching".     I constantly get "Call Failed" when making calls.

    I have the problem of calls getting failed.. Black Iphone 4S 16gb IOS 6.1.3. O2 Network - Airtel India.
    I have full bars of signal but cannot  make calls. Goes to "No service" then to "searching".
    I constantly get "Call Failed" when making calls.
    What could be done to solve the problem?

    Try settings/general/reset/reset network settings.  If that does not do it then contact your carrier

  • Why does Firefox get hung up, when opening new pages? I've tried disabling plugins and extensions to no avail.

    Initially, when I open Firefox everything opens very quickly. However, after several minutes it gets hung up when opening new pages. I have close the browser and reopen it to start over. But each time it does the same thing. Works well at first then poops out. The trouble started yesterday. Before then, I never had any problems.
    I've tried disabling all the plugins and extensions, but it doesn't make any difference.

    Try to repair the disk permissions:
    * http://thexlab.com/faqs/repairprocess.html
    * http://support.apple.com/kb/HT2963 Troubleshooting permissions issues in Mac OS X

  • Finding the oldest record

    I am trying to write a query that finds the oldest book in a libary and displays its location and book name. its returning with the wrong output so far
    insert into OLDESTBOOK(LOCATION, NAME)
         select
              l.location, b.book_name
         from
              libary l, books b
         where exists
              select
                   Min(published_date), s.shelve_id, l.location_id
              from
                   books b, shelve s, libary l
              where
                   s.shelve_id = l.location_id
              and
                   s.book_id = b.book_id
         )

    Yes, sorry, it should have been 'and' and not 'where'.
    If you're getting multiple rows back, that mean that there are multiple books with the same oldest date, provided that your JOINs are correct. Are you getting different locations and book names in the multiple rows?
    Edited by: SeánMacGC on Jul 23, 2009 3:33 AM
    Another way to get the oldest would be:
    SELECT Location, Book_Name,
      FROM (
    select l.location, b.book_name,
    RANK() OVER (ORDER BY published_date) rnk
    from books b, shelve s, libary l
    where s.shelve_id = l.location_id
    and s.book_id = b.book_id)
    WHERE rnk <= 1;But again, if there are multiple locations and books with the same mininum published date, you'll get more than one record back.

  • TS3899 Why do I have delete my mail account off of my phone and reenter the same information to get email again

    I have had to delete the mail accounts off of three Iphone 5's with IOS 7.0.2 and reenter the same information to start getting mail again. What is happening with the mail accounts on the operating system?

    Does anyone else have access to your Apple ID?

  • Why does closed documents always open up again when I use the program

    Why is it that recently opened documents always opens up whenever I reopen the program to access other files?  The previous opened file will always reopen again automatically whenever I access the program to open other files.  This has happened after I upgraged to 10.7 and, so far, occurs in Preview and Pages.  I've not used other applications so I don't know if it happens with those as well, i.e., Numbers, etc.  Any help with debugging this would be appreciated.

    Mate - it's not a bug... it's a feature called Resume.
    In essence, if you don't close a window before you quit the program, you will get that window back again when you next open the program.
    You can change this behaviour in System Preferences. Click on General and untick "Restore windows when quitting and re-opening apps".

  • Get error message "firefox is in offline mode, uncheck the work offline menu and try again " when trying to open firefox after downloading latest version of firefox

    after downloading the latest version of firefox, when trying to open it I recieved the message, "Firefox is in offline mode. cannot browse web. Uncheck the work offline menu and try again". Have tried several times to open with same results. Have even uninstalled firefox and reinstalled latest version and still get meassage after trying to open.

    thank you - that does make sense except i have another computer that connects to the internet in the same way but it doesnt happen on that one. i didnt change anything - it just started a couple of weeks ago after i updated firefox to 11.0. cant find any settings in firefox to alter either - thanks for the help

  • Getting "try again" when installing software

    I'm suspecting problem originated when installing (unsuccessfully) update MS Office; all was good before that. When reinstalling, gets to "installing files" then stalls, saying 'try again'. Also tried new installation of iWork, not previously installed. Same thing.
    Tried Safe Boot and computer "went dark" and crashed. +Disk Utility+ confirms problems (e.g., "incorrect number of thread records") but cannot complete either permissions evaluation/repair or disk evaluation/repair.
    Computer's "working" but I need to restore my copy of Office and other software as well. Help!

    Boot from your install disk by holding down the c key. Get past the language screen and choose Disk Utility from the menu bar and hit the First Aid button. Highlight your volume in the left panel and then hit Repair Disk. If their are unrepaired errors then run again. If DU can't repair your disk then you will need a repair utility such as DiskWarrior.
    http://www.alsoft.com/DiskWarrior/index.html

Maybe you are looking for