Why the sudden download speed increase?

BT Infinity was installed on the 1st February and although my upload speed doubled to 1.62Mbps my download speed was the same as my standard BT Broadband was at 5Mbps or just below. I was on the point of ringing a BT 'Techie' as late yesterday afternoon my Internet access had become painfully slow. In despair I turned everything off at the mains and when I switched on again the following day my download speed had increased to 32Mbps!
Could anybody explain why leaving everything off overnight would result in such a dramatic increase please? I'm certainly not complaining...just curious. The speed increase is reasonably constant on two wired PC's and one wireless Laptop.
Ray
Solved!
Go to Solution.

Hi,
Did the OR Eng leave you with only 5Mb D/L for infinity????????. He should not have done that, any way as your profile would have been set at say 3500kbps and for some reason DLM never picked up the speed for you, Now when you rebooted your system the HH3 picked up your profile to what it should have been. Basically that's it some can go into more detail if you want.
iechyd da
sky twitter account a customer ask why sky go streams are worst then sd and yet bt and eurosports apps stream in hd. Reply from mod, oh thats easy the files for hd are some huge that sky go can't play them and no app can stream hd due to this and so when they say they are they're really sd streams, if there was any way around this we would have done it now.

Similar Messages

  • How to increase the camera download speed and save binary file speed

    My camera is pco dimax S1 camea. The interface is cameralink Base.
    The memory is on board.
    I use 1000fps@480*480 resolution to capture 1 sec.
    Then download the images from the on board memory to computer.
    The board in the PC side is NI-1429 board.
    Theory, the cameralink transport speed should be 250MB/S
    In the file format, file size should be (480(H)*480(V)*16bit*1000fps)/8=460.8 MB
    Logically it should be download complete under 2 sec
    But in my program, the real download speed at about 40 framess/s, (480*480*16*40)/8=18.432 MB/S
    (250MB/S)/(18.432MB/S)= 13.85
    The download speed is totally slower 13.8 times.
    I use the SSD and RAID 0 to save the file.
    I did some test as below:
    1. Try to save png or binary file. The speed of binary had a litter faster, but it still doesn't close the 250MB/S.
    2. I try to adjust the resolution from 16bit to 12bit or 8bit to save the image. The download speed still 40 frames/s(18.432MB/S)
    3. I try to use IMAQ Sequence to save the file, but how to add in my program, can anyone help me?
    On the other hand, I also guess may be the structure of my program have an problem cause the download and save speed slow.
    Attached please find the program.
    To see if there are other ways to increase the speed of file written!
    Attachments:
    Imagesavebinary.vi ‏91 KB
    test.png ‏157 KB

    You have to separate your step1 and step2 into two parallel loop.
    If you put the two tasks in one loop, the lower speed task will affect the loop speed.
    So that the program won't achieve the top speed.
    Is continuous acquisition required for your application? Can sequence acquisition or finite acquisition be your workaround?
    The memory handling in continuous acquisition is way a lot more difficult than finite acquisition.
    I would suggest you to figure out how finite acquisition work and then jump into the continuous acquisition application.

  • Increased download speed = increased ping

    Hi,
    After some wrestling of biblical proportions with BT Technical and having had 5 engineers out since January a faulty section of cable was replaced last week. This has led to three changes in our broadband service, two good, one very bad.
    1. The download speed increased from around 0.98 mb/s to 2.10 mb/s - Great.
    2. Incoming phone calls no longer caused the broadband connection to reset - Great.
    3. The ping has increased from a steady 48ms to 96ms - Bad.
    For info I have a Home Hub 3 with Option 3 package and the above numbers came from www.speedtest.net. This issue is of particular annoyance with XBox-Live which is now virtually unusable following the increase in ping. The XBox is set up for port forwarding and in the DMZ and is connected to the hub through an official wireless adaptor.
    Any assistance with this would be much appreciated.
    Thanks
    Chris

     I see you are still online while you are waiting try the command prompt ping-The easiest way to check ping is to open the Command Prompt on the PC and type "ping (ip Address or Website)". Example:
    ping www.google.com
    I take it your PC is wired!
    Mortgage Advisor 2000-2008
    Green Energy Advisor 2008-2010
    Charity Health Care Provider Advisor 2010-
    I'm alright Jack....

  • I need to update to the latest version of Snow Leapord-currently running v10.6. Because of where we live the slow download speed for such a large file has kept me from downloading the update. What can I do short of hooking up computer elsewhere?

    I need to update to the latest version of Snow Leapord-currently running v10.6. Because of where we live the slow download speed for such a large file has kept me from downloading the update. What can I do short of hooking up computer elsewhere?

    Do you ever visit a friend or realtive with a Mac who has faster internet? Maybe the local library has Macs on a fast line. If so, get a USB thumb drive and put this link on it from your computer:
    http://support.apple.com/kb/DL1399
    Then put this link on the drive:
    http://support.apple.com/kb/DL1429
    When you are at some place that has a Mac with a decent download speed. insert the thumb drive in that Mac and click on the first link ("DL1399") and direct the download to your thumb drive. Now do the same this with the second link.
    The installer files will now be on the thumb drive and, when you get home, drag them from the thumb drive to your desktop. Install the Combo update first.

  • How do I make sure i am getting the new internet speed increase?

    I have the DPC3939 modem, and want to know if there is anything I need to do to make sure I am getting the new speed increase in our area

    Powercycle it with the backup battery removed (if it has one installed).

  • Why the applied_scn can not increase?

    I use the Oracle stream while I find the change of the source databse can apply in the remote database,but the applied_scn can not increase for a long time after the change has success.If this scn can not increase,I can not delete some logfile,which may be full of my disk one day.
    Who has suggestion?

    you say you want delete some logfile , destination's logfile , is it right ?
    i think that's no problem because the change of LCR is kept in Stream Queue but not in logfile. that means you can drop some archivelog as you want. it dosn't matter! :)

  • How do I increase the file download speed?

    When downloading outside of firefox, I manage anywhere from 5mb/s to 16mb/s, depending what I am downloading and where from. Yet, when a file has to download from within the browser, it downloads at 1/30th to 1/10th of that if I am lucky. Is there some kind of restriction built in to firefox that I might be able to change or am I just S.O.L?

    Download / upload speeds depend on 3 things.
    * The speed of the ISP
    * The speed of the sender
    * The speed of the receiver
    Since you seem to have decided Firefox is the issue, lets work on that.
    Go to the '''[https://addons.mozilla.org/en-US/firefox/ Mozilla Add-ons Web Page]''' {web link}
    (There’s a lot of good stuff here) and search for a download manager.
    There are also external programs that can be used.
    '''http://kb.mozillazine.org/Issues_with_Firefox#Downloading_opening_or_saving_files'''

  • Why max WiFi download speeds are only 20-25 Mbps

    I raised the issue of why my wifi speed on the Xoom is limited to 20-25 Mbps on the Motorola Forum and there is an informative thread on the topic.  If you are interested take a look.
    Max Wifi Xoom speed: https://supportforums.motorola.com/thread/48702
    -Jim

    No cordless phone (two iPhones and two iPads though).  It does have one or two walls on line of sight.  A few wireless door security zones.  And a large china cabinet that my wife sure wouldn't let me move.  Do any of these sound significant enough to drop the dowload from 30Gb to .1GB...while upload stays consistent.  I have had better signal strength through two walls 100 feet out from my house, havent tried recently though.  I am suddenly aware as my switch is acting up and i had to use wifi on my xbox.

  • HT1926 Why the iTunes download doesn't start in windows 7 after deleting temp file etc

    I have followed the instructions for deleting the temp files and still when I click the download button nothing happens. I am very new to this Windows 7 so most likely I am the reason for this failure but its driving me crazy! How do I get iTunes to work?

    Adobe staff has to browse these forums on their own time (I know that should be part of their job) so their visits are infrequent.
    There are several sites to report bugs which seems to be counterproductive.   I think this one has the most support right now. http://feedback.photoshop.com/photoshop_family
    And you are sure you are not running Bridge CS5 in the background?  You can only run one Bridge program at any one time.
    In both the Mac and Win OS seems like the workaround to create a new user works frequently, but it is a hassle.  In your problem solving did you unistall everything then run the Adobe Script Cleaner? 
    Although this is a stretch for this problem, but might search your uninstall directroy and see if there are any expired Adobe trials you have not uninstalled.  For whatever reason it can stop launch of Bridge "as you need to launch parent application at least once".  Apparently even though it is long gone it is still seeing it as "parent" program.  As I said it is kind of a stretch here, but you never know.
    Good luck on this as I know it is extrememly frustrating and Adobe does have its communication problems. 
    That is why it is important for the users to step up and start contributing to these forums with suggestions on what to try, thiings they have tried and worked or did not, etc. 

  • What is the minimum download speed required for iTunes Match streaming

    I have been very interested by iTunes Match, and I have read much about it.  The only thing that I have not been able to find is the minimum bandwidth required to stream music to an iPhone.  Specifically, I would be looking to stream to an iPhone 5, as well as an iPhone 4.  If there is an official minimum requirement, please let me know.  If there is no apple specified speed, I would be interested in what you found to be he minimum speed necessary for smooth streaming.
    Thanks,

    iPhone 4 and 5 will both work well with a good 3G service and much better with 4G.  Song file is actually downloaded to allow for all conditions of viable mobile signal.

  • HELP~why the usage of photo increase?

    Hello everyone
    i bought 5s fewdays ago,
    i have about 3000 photos ,and the PC shows that the cacapity of these photos should 5.44G
    then i use another tool(such as  Itools) to put the photo into the new iphone
    i found that the usage of photo is 11.9G!,Photo library shows 11.8G,but my total photo just 5.44G
    what's wrong?why increase double usage of my photo?
    what should i do?

    The answer is in your code.   No code, no answers.
    CSS Styled Contact Form
    http://alt-web.com/DEMOS/CSS-Form.shtml
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/

  • Why the Safari download icon doesn't refresh until you single click on it

    After Leopard I found that when I download files in the stack, the icon doesn't reflect the downloading status like it used to in leopard. I mean the progress bar on the icon doesn't move until it finishes download or when you click on it. I tried to download on the desktop, the same thing happens
    Another problem is I can not eject disk image nor computer on the network. Though external HD and optical disk eject w/ no problem.
    Message was edited by: Michaelfengdayu

    And this problem seems to be systemwide. Since I created a new user and under which problem still exists.
    Hope apple will look into it

  • Why the ALV download Excel can't show all field title?

    Dear All
             I have a problem for ALV download to Excel
    Example: the field  title description has 11 len bits when I download Excel then the field title is u2018descriptiou2019 only 10 len bits. I found when the field value is more then 11 then can show all,if the field value less than 11 then download Excel only show 10.
    The description has 40 bits.if itu2019s value less 40 then ALV CONDENSE the space .
    I removed this code: GT_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.but problem is also exits.
    How can I do ?
    Thanks

    Make sure you populate below, it may help you to solve your problem. 
    t_fieldcatalog-col_pos     = col_pos.
    t_fieldcatalog-outputlen   = out_len.
    Rgds,
    SaiRam

  • Why the itunes download a update when I try to restore, if my ipad is already updated?

    When I try to restore, the ITunes search for update and ask to download the iOS 6.1.3 update of about 800mb, but my iPad is already 6.1.3. I can't restore because of this problem..

    The question isn't whether your iPad was running 6.1.3 before the restore. The question is whether your computer has a copy of 6.1.3 to load onto the iPad. The restore is going to wipe out whatever was on the iPad, then load both iOS and your saved data.

  • Why is the download speed so slow?

    I have 100MB internet, and I am able to receive that speed with other applications. (I literally just tested with steam and got 9.1MB/s, at the same time as the Adobe download is running)
    My Adobe download is 35 KB/sec or less, seriously guys? I don't intend to leave my PC downloading for 2 days just to get software!
    I have tried both with the download manager (The download errored at 78% after I had left it running for about 6 hours) and now the browser (I've managed to get 1.6GB of the 5.8GB in 6 hours, currently running at 36.8KB/sec)
    In the same time period I have downloaded the entire of GTA IV (15.6GB) and managed to play it for 5 hours!
    Any idea what is causing it to be this slow or is the download service really this bad?

    I'm using gigabit wired internet, with an appropriate network card and router, my firewall is completely disabled (both on my router and my pc) and I don't see why anti-virus should interfere with the download,
    What is the general download speed normally received? Would you recommend using the browser download or the download manager?
    I'm happy if this is just a "slow day" for adobe server or something, but my internet seems to be 100% fine as several other downloads I have tried have managed to get full speed even while the Adobe download is left running. (I obviously have had these other downloads off the majority of the time the adobe download has been running)
    Cheers for the response,
    Rob

Maybe you are looking for

  • Sending email using an alternate email address

    I use a permanent email forwarding service from my university for all my email. All my contacts know only this address which never changes regardless of who my ISP is. I want the messages I send from my iPhone to show this address as my sending addre

  • Question on The @EJB Annotaion

    Hello everyone, How does the @EJB annotation works? Does it already assign an instance of the EJB once a field is annotated by it? For example I have a code below; public class MyClass {     @EJB     StudentEJB studentEJB;     @EJB     EmployeeEJB em

  • Form created in acrobat pro 6 blank in acrobat pro x

    We recently upgraded from adobe acrobat 6 pro to acrobat X pro and when opeing some filled out forms from acrobat 6 they are not filled in in acrobat x pro if we reopen them in adobe acrobat 6 they work fine. Is there something we have to do to make

  • "The specified resource is reserved" in DAQ error

    Dear all, Earlier before I posted a thread on "stop error caused by device driver?". The problem was partially solved, however, new problems start to come up. Basically the problem is that I have an PXI-6115 DAQ card, I used its two output channels t

  • Pass Timestamp Parameter to a SP

    Hi All, How to pass a TIMESTAMP parameter to a Stored Procedure?? For eg i want to pass the sdate value as 2007-08-01 12:00:00 create or replace procedure all_test(sdate timestamp) as v_date varchar2(5) := to_char(to_date(sdate,'dd-mm-yyyy HH:MI:SS')