Why the text field frame's line width cannot be adjusted?

I am now working on a PDF file with some text fields with combo turned on, specifying the number of chars the fields can hold. Their frames' line width is not thick. This is what I want. This is shown in the picture below:
But when I try to preview the PDF, I discover that these fields do not follow what I have specified: no matter what thickness I choose, the frames are always thick. I want them to be thin!
See below:
Why is it so? What should I do? Any ideas are welcomed.

I have sent my form to you to take a look. Thanks for your support!
By the way, I have uninstalled Acrobat 8 and installed Acrobat 9 Pro, but I am facing serious problems. Whenever I open Acrobat I will face an EULA page and if I click "Accept" or "Decline", the whole program will close immediately.
I have googled and added an EULA value (=1, in hex) in the regedit. No effect. I want to uninstall Acrobat 9, and there is NO RECORD in the Install/Uninstall section in the Control Panel. I am using Vista Home Basic.
I am now frustrated. I tried Acrobat 9 and it failed, and now I can't even uninstall it and revert to ver 8.......My God....

Similar Messages

Message: The causative CO object in line NNN cannot be adjusted

Good Morning Gurus-
My user was processing clearing via F-44 and received this message before receiving the posted document number. Can anyone tell me what this message means?
The causative CO object in line NNN cannot be adjusted.
I did a search in the network and did not find this one.
Thank you.

Hi,
Please see the below OSS notes:-
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1304276]
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1275209]
These should solve your issue.
Regards,
Gaurav

After saving a htaccess file, why the text is on one line

hello all,
I am a webmaster and some time I have to setup a htaccess file (.txt file)When I edit it with Textedith, I make a modification and I save it. Nothing works.
When I open the same file with a PC, all the text is in one line. of course it will not work.
Can some one tell me why the file is not saved in the format when I open it, so it saved in one line?

TextEdit isn't the best choice for editing configuration files, since it doesn't use Unix line endings -
I thought TextEdit did use Unix line endings (LF). The reason it is all one line on a PC is that PC's do not, and thus will only display new lines if line endings are Windows format (CR + LF).
I don't think there should be any problem editing config files with TextEdit, but TextWranger is better, and it also easily handles file names that begin with a dot.

Why does text field in InfoPath 2010 show user name with two commas between first name and last?

Here's the problem. I have a text field called Manager in an InfoPath 2010 form that is getting populated by a drop down field called
Business Unit.
The Business Unit drop-down field is pulling information from
column A in a custom list via a managed data connection. The custom List has two columns:
Title & Manager.
The Manager column in the custom list is a 'Person or Group' type column.
The Data Connection pulls both the Title, Manager
(and ID) data.
There is a rule on the Business Unit drop-down field to change the value of the
Manager text field with the Manager data on the custom list. The rule pulls the
Manager information and filters the value to match the
Business Unit on the Data Connection with the Business Unit drop-down
field value (Main).
The Business Unit drop-down field works great and pulls the value from the custom list, and the rule populates the Manager text field. The problem is that Manager text field shows the name as such:
[smith,, john]. Notice the two commas between the last and first name. There should only be
one comma!
Anyone have an idea why the text field is appearing with two commas?
Arnel

Hi all,
I have a workaround for this. I have an InfoPath 2010 form pulling data from a SP2010 list. The user chooses a System (Business Unit) from the dropdown list and that choice auto populates the associated user (Manager) for that system. I had to
use concatenation, substring before and substring after to display the correct data.
concat(substring-before(DisplayName, ",, "), ", ", substring-after(DisplayName, ",, "))
DisplayName is the original data for the field. I am able to cut & paste this field into the formula. Therefore, I added a few spaces to separate it from the actually formula for future use.
Select Insert Function
Select concat
Select the first link to double-click to insert field
and then select Insert Function
Select the Text category and choose substring-before
Select the third link to double-click to insert field
and then select Insert Function
Select the Text category and choose substring-after
Copy and paste your fieldname (in my case DisplayName) in the
double-click to insert field
parts of the substring-before and substring-after links.
Delete the middle double-click to insert field link
Add quotes, spaces and commas so that they match the following format:
concat(substring-before(DisplayName, ",, "), ", ", substring-after(DisplayName,
Translation:
concat(substring-before(Doe,, John, ",, "), ", ", substring-after(Doe,,
John, ",, "))
Bring together all of the text before ",," (i.e. Doe) with ", " (comma, space) and all text after ",," (i.e. John).
It should return
Doe, John.
I hope this makes sense. I have these instructions with screenshots if you need them, contact me.

Changes in the Text Field thru FB02

Hi,
I have created an accounting document thru FB01. However, there were some changes in the text field that needs to be done so I have edited the line items thru FB02. After saving the changes I viewed the data in tcode KE5Z but it seems that the changes in text were not captured in SAP Standard report. But when you double click the line item it will show the edited text.
For Example.
Document 1000001 original text is: 'Rental Charges for the month of April' ( originally created in FB01 )
Edited text thru FB02 : 'Rental Charges for the month of May'
In FB03, it will show the edited text which is 'Rental Charges for the month of May'
But in other reports such as KE5Z, it still shows the original text.
Kindly help.
Thanks.

Hi Sanil,
Thanks for the quick reply.
Is there a way where changes in an FI Document will also update the CO line items or the profit center actual line items?
When we originally create an FI document in FB01, the text field in CO line item is also updated as to whatever text we have inputted in the document ( details were stored in BSEG ). But if changes were made, the actual line items were not updated...
Regards.

WHy is the cursor jumping to wrong position (mainly back to position 1 in the text field) as I try to post comments to peoples posts on Facebook?

I love FIrefox browser and prefer to use it on all my devices, PC, Smart Tv, Phone, Tablet etc. In recent times Iv'e had problems though, everytime I try to comment on a facebook post with each key stroke the cursor jumps back to the beginning of the text field and by the time I finish typing I look up and find jibberish, yesterday I upgraded this RKM Mk902 Android device that I am typing on now unfortunately using Chrome from Anroid 4.2.2 to android 4.4.2 Kit-Kat and thought I would no longer have that problem but the issue is still there. I also have discovered I'm having similar problems with FireFox on my Cube U39GT tablet. As I spend more time on Facebook than any other website I have to find a solution. I thought it may of been one of the addons that i use causing the problems such as Phony but I still get the issue without the addons and after a clean install. Please help me sort out this problem so I can once more use FireFox on my Android devices.

I found this, it seems that there are a few issues in Android as well with the wrong placement for the cursor when you type: [https://github.com/RobinHerbots/jquery.inputmask/issues/465] but since it is only happening in facebook, this is odd.
What this means is that they are working on fixing specific issues like this and I am not sure when this will be fixed.
Does this happen with both keyboards that are offered in the Android Settings?

Is there a way to print the check register with the Text field

Hi,
Is there a way to print the check register with the Text field and also each item's Text field?"
When we enter a invoice we enter a generic text on the Basic Data tab then enter a "+" on each individual line item which in turns defaults to the generic text. Just wanted to know if the check register could draw in the individual line item detail where we can enter text that relates to just that line item. Sort of like the MIR7 draws in the detail for each item.
Kindly help me in full fill the above requirement.
Thanks
Sunitha

Hi,
Can any one help me on this issue?
Thanks
Sunitha

How to use the separate symbol in the text field in the adobe form.

Hi,experts,
I dont know how to use the separate symbol to make a paragraph separate into several lines correctly in the text field in the adobe form.
Action:
1. config the ADS successfully.
2. create the adobe form with a mult-line textfield(binding the 'remark' context in the interface of the form) using sfp.
3. create a WDA for invoke the form and transfer the 'remark' context data.
I use the following codes to display the paragraph in the PDF document:
CONCATENATE
'1、aaaaaaaaaaa；'
'2、bbbbbbbbb '
'3、ccccccccccc'
'4、ddddddddd'
INTO remark .
lo_nd_z_hr_php_payslip->set_attribute(
EXPORTING
name = `REMARK`
value = remark ).
But I found all the content aren't paragraph separate correctly in the text field in the adobe form when I run the WDA.
Could you please give me some hints to make the paragraph separate correctly in PDF document? Thanks a lot in advance!
My email is : [email protected]
Best regards,
Tao
Edited by: wang tao on Apr 8, 2008 1:58 AM

Hi,
If it is just a one word value then you could use this in the exist event;
this.rawValue
= util.printx(">?<*",this.rawValue);
This changes the first character (represented by the ?) to uppercase (represented by the >) and all trailing characters (represented by the *) to lowercase (represented by the <).
If you wanted something more general ... if they could also enter a middle name then you could call a function like;
function toTitleCase(textValue)
return textValue.toLowerCase().replace(/\b[a-z]/g, function replacer(match) { return match.toUpperCase(); });
This uses a regex to change all lowercase letters following a word boundary to uppercase.
Bruce

How can I program the text fields in my email forum to have rounded corners

How can I program the text fields in my email forum to have rounded off edges or corners.
this is the code im using.
// insert code here// insert code here// prepare email field
var email = sym.$("email")
email.html("Enter your Email: ");
inputEmail = $('<input />').attr({'type':'text', 'value':'', 'id':'email'});
inputEmail .css ('font-size', 14);
inputEmail .css ('width', 350);
inputEmail .css ('background-color', '#4e4e4e');
inputEmail .appendTo(email);
// prepare topic field
var topic = sym.$("topic");
topic.html("Topic: ");
inputTopic = $('<input />').attr({'type':'text', 'value':'', 'id':'topic'});
inputTopic .css ('font-size', 14);
inputTopic .css ('width', 350);
inputTopic .css ('background-color', '#4e4e4e');
inputTopic .appendTo(topic);
// prepare message field
var message = sym.$("message");
message.html("Message: ");
inputMessage = $('<textarea />').attr({'type':'textarea','rows':'10', 'cols': '25','value':'', 'id':'message'});
inputMessage .css ('font-family',"Arial,Helvtica,sans-serif");
inputMessage .css ('color',"#ffffff");
inputMessage .css ('font-size', 14);
inputMessage .css ('background-color', '#4e4e4e');
inputMessage .css ('box-shadow', '#4e4e4e');
inputMessage .css ('width', 350);
inputMessage .css ('height', 150);
inputMessage .appendTo(message);
var submitBtn = sym.$("btn");
submitBtn.html("Submit");
submitBtn.css("text-align", "center");
submitBtn.css("font-size",14);
submitBtn.css("font-weight","bold");
submitBtn.css("color","#ffffff");

Try this: inputEmail.css ('border-radius', '25px');
attachment
more details

How to populate the TEXT field in MIGO

Hi folks,
While creating material document in MIGO or MB01, i am inserting some data in TEXT ( Field in line item level ). This text data is disappearing , once mat doc is created.
how to populate the TEXT field in MIGO?Is there any cusomisation?it's urgent .
Regards
pabi

Hello Pabitra,
I had a similar issue in my Project.
Please verify if the SMOD enhancement MBCF0002 (EXIT_SAPMM07M_001) is active in your system.
If this is the case, verify from two angles:
a) Whether the Enhancement was accidentally activated - If yes, then De-activate the same
b) If there is some logic coded in the User Exit, but, the Text is somehow not determined...even the existing content in the text field (input to EXIT_SAPMM07M_001) will get vanished.
Hope that your problem will be resolved by this. Pls reward points.
With Regards
Vijay Gajavalli

How do you change the lenght of the text field in fb50?

Hi,
In the transaction FB50 , the long text field In the item line is not showing the whole description written in the text field (word pad).when viewing the item details it is showing ony half description.How do we increase the field size?

Are you Talking about G/L account short text in the Item Level ? If yes
Standard Text Field 20 character Length" The G/L account short text is used for online displays and evaluations which do not have sufficient space for the long text."
Kanagaraja L
Edited by: Kanagaraja Lokanathan on Jul 15, 2009 1:05 PM

How do I set the Text Fields alignment using LiveCycle 7.1

I created a Form using LiveCycle Designer 7.1 with a few sample Text Fields. Each text box is about 0.75" in height to accomodate a few lines of text within it - it will be holding a description field so the data could be quite large. When my PDF document gets populated with data from an XML file via a .NET Web Page, the text is shown in the center of the Text Field. However, I need the text to be dispalyed at the Top of the Text Field, not in the center. Does anyone know where the option is to make this happen?

In the paragraph tab. You may have to open it the first time from the Window menu.
Chris
Adobe Enterprise Developer Support

When i go to send a new text, the text field isn't blank. There is already text entered in the message body.

When i go to send a new text, the text field isn't blank. There is already text entered in the message body that I have to go in and delete before typing my new text. this prevents me from forwarding anything through text because if I get something I wish to forward, selecting forward as an option always brings up the same junk just like when trying to send a new message. How can i remedy this?

Here it goes -
1) Download iBackupBot: http://download.cnet.com/iBackupBot/3000-2141_4-10969873.html
2) Plug phone into computer and run backup
3) Use "Explorer" box to find Messages: HomeDomain/Library/SMS/Drafts/(null).draft/
4) In "Null Drafts" there is a file "message.plist"
5) Double click to open, (cancel the popup if you did not purchase the iBackupBot) and you will see the prepopulating message on the <string> line 6
6) Delete the offending text, leave all code
7) Close text editor
8) Right click on message.plist file and select "Restore selected item(s) to device"
9) File will be restored to your phone and it will restart itself.
10) Voila! Now it is time to consider that Windows phone....:)

How to Validate the Text Field in JSF

Hi,
I am facing a issue to validate the text field where the below code accepts (space' ',underscore'_',pipe'|') symbol as a first character and last character.Where by it can accept in the middle.
It should not accept special characters also. Below code is working properly for special characters.
<tr>
<td width="30%" align="right"><b><h:outputText id="aAccrualType" value="Accrual Type" /> </b> <span style="color:red">*</span></td>
<td width="50%">: <h:inputText id="accrualType" value="#{accrualTypeMast.accrualType}" required="true" >
<t:validateRegExpr pattern="^[(a-z)||(A-Z)||(0-9)||(_)||(\s)||(/)]+$" />
<f:validateLength minimum="1" maximum="50"/>
</h:inputText>
<h:message for="accrualType" showDetail="true" style="color:red" />
</td>
</tr>
The thing is i dont have much knowledge in regular expression.
Is there any other way to do this.
Could anyone help me in this.
Thanks,
Ambika☺

This has nothing to do with JSF.
I suggest you to read the Pattern API documentation [1]. You can easily create a small Java Application and test the regexp using String#matches() as it uses the same regexp guidelines.
public static void main(String[] args) {
    String regexp = "^[a-z]+$";
    String value = "foo";
    boolean match = value.matches(regexp);
    System.out.println(value + " matches " + regexp + ": " + match);
}[1] http://java.sun.com/j2se/1.5.0/docs/api/java/util/regex/Pattern.html

Change the position of the text field in the report region

Hi,
I am having a report region in whch there are 2 buttons which are in the Region Template position #Create# and a
text field. I added a text field in the same region. I tried to change the position of the text field near the buttons. I
tried to change "label-Horizontal/vertical alignment" and "Element horizontal vertical alignment". But the postion of the
text field is not changing. Plz help,
Thanks,
TJ

Hi Andy,
Sorry to ask this questions.
1.Where exactly i need to change the HTML code(By uisng the view source?)
2.My taskname part html code when viewing the source is given below
tabindex="999"><img src="/i/e.gif" alt="Edit" class="eLink" />
</a><tr></td><td nowrap align="left">
<label for="P1_TASK_NAME" tabindex="999">
<a class="t16OptionalLabelwithHelp" href="javascript:popupFieldHelp('5853137628393530415','676839962625525')"
tabindex="999">Task Name</a></label></td>
<td colspan="1" rowspan="1" align="left" valign="top"><input type="hidden" name="p_arg_names"
value="5853137628393530415" /><input type="text" name="p_t06" size="10" maxlength="20" value=""
id="P1_TASK_NAME" /><a class="eLink" title="Edit" href="javascript:popupURL('f?
p=4000:371:676839962625525::::P371_ID,FB_FLOW_ID,FB_FLOW_PAGE_ID:5853137628393530415,107,1');"
tabindex="999"><img src="/i/e.gif" alt="Edit" class="eLink" /></a></td></table>
<table summary="" cellspacing="0" cellpadding="0" border="0" width="100%"><tr><td align="right"><table
cellpadding="0" cellspacing="0" border="0" summary="" class="t16Button">please suggest what changes i need in this code to change the alignment of the task_name text field,
Thanks,
TJ

Why the text field frame's line width cannot be adjusted?

Similar Messages

Maybe you are looking for