Why the tick "journalized data only" is disabled

i want to try CDC as guide describes.
but the tick "journalized data only" is disabled in grey.
i've imported and chose the JKM, please tell me the possible causes.
thanks.

Have you added the table to cdc and started the cdc with a subscriber?
Follow the instruction on physical Page 33 of the ODI User Guide.

Similar Messages

Why the basic finish date is not adjusted in planned orders

Hi, all.
Can anybody help me to understand:
"Why the basic finish date is not adjusted in planned orders during
forward scheduling, but in production order basic finish date is adjusted?
It is look like non-coordination between groups of developers.
And lead to situation, when planner don't see in MD04 when he can really wait material receipt. He must go to planed order and check production data there, it's unusable."
Am I right, or SAP have it's own logic.

Hi,
Production orders are different story. Since production order is a constant element, they are not created in the course of MRP, basic dates can be adjusted. In production order basic finish date is adjusted, but you won't see for the upper level materials', basic dates of the planned orders adjusted according to the prodcution order you create. Production order is consistent within itself in terms of date and is not dependent to other elements of MRP, but planned orders are not like that.
MRP creates planned orders whose basic finish dates are calculated by subtracting goods receipt time from production start date of the source of requirement. MRP works backwards without changing directions. Meanwhile if any production finish date is calculated different than the basic finish date due to forward scheduling, in order not to violate the alignment between the basic finish date and source of requirement's start date, basic finish date is not adjusted. If it was, dates of all the planned orders calculated so far at the upper levels of the BOMs had to be recalculated, otherwise all the consistency of all the dates is violated. This cannot be done because changes in any level affects all lower levels.

Why the $29.99 data package?

I have been eligible to upgrade my phone for almost a year now. I haven't upgraded because the phones that I want to upgrade to, require the $29.99 data package. I don't like it, but I understand requiring a data package. But why can't I get a smart phone with the $9.99 package. There are two phones on my plan and I just can't see adding another $60 to my plan for services that I don't need and may only use occasionally.
There are other carriers out there with cheaper plans but, obviously, their service is not as good in my area or I would have switched by now. I love Verizon's coverage and dependability but I don't want to be stuck with my LG Dare for the rest of my life. Are there any other options? Or am I going to be required to pay another $60 or switch to a lesser service?

It was rumored back awhile ago that Verizon was going to change the data plans around like AT&T has,but again it was just rumor. Verizon has not done anything.
If you really want that phone you'll have to fork over the money for the data plan. Otherwise here is some good news you might like.....smart phones released prior to 11-14-2008 do NOT require a data plan at all. You could get a smart phone that was releasd prior to that date & not get a data plan.

Does anyone know of a VI or how to go about writing one that will prevent the computers time/date from being disabled while an application is running.

Does anyone know of a VI or how to go about writing one that will prevent the computers clock/time from being disabled while an application is running. The time and date can normally be reset while an application is running by clicking on the time/date in the lower right-hand corner of the computer screen. I have an application that runs over several days and it is critical that the time and date of the computer not be changed. Is there an easy way to lock this out from the user? Note that I am what I consider an advanced beginner in LV.
Thank you,
Chuck
Solved!
Go to Solution.

That is not something you can do from LabVIEW, as it is an operating system operation, and it will depend on the operating system that you're using. On Windows you can use a group policy to control this. Please Google on "prevent time and date change in windows".
Also, please try to refrain from stuffing your entire message in the subject block. Keep the subject short, but descriptive enough so it can be understood what you are basically asking. Thanks.

Why the time and date is not correct when I save a waveform in txt format, using Labview 6.1?

I am using Labview 6.1 and my operation system is Windows 98. The date/time properties is configured in the Windows (time and date in the control panel is correct). I generated a waveform using Basic Function Generator.vi and saved this using the Export Waveforms to Spreadsheet File.vi. When I opened this file the date and time was wrong. Only the delta t was correct and it did not show the date neither the time, only a float number. How can I adjust the correct time?

Actually, the date/time is correct, it is expressed as seconds since January 01, 1904.
In order to print the string version of the date/time from your file, you will need to write a utility that converts the date/time to a string or series of strings in whatever format you wish. This can be done by reading the first line (I assume that is the line with the time on it), formatting the date/time into a string, and writing over this information in the file.
The waveform VIs were meant to be used internally to read and write waveform data. Any use beyond that should require you to add formatting and other information/data as necessary.

Why the mega key Ad-on is disabled with FF9?

Why can't I access megaupload.com with FF9? it showed that "problem loading page"??? I dont understand because when I use FF8, it accessed normally.

Firefox 9.0 is a pre-release Beta version. That add-on probably hasn't been updated yet and the developer only supports full release versions of Firefox.

CDC, journal data from Data Store won't load

Hi, I was having problems yesterday with CDC and setting up a package to loop and load journal data, so today I decided to patch ODI with the 11g log miner and start again. I dropped the source schema and set up anew following the Rittman guide ... http://www.oracle.com/technology/pub/articles/rittman-odi.html
I have run through starting the journal and it all executes without errors, I can add a record to my source table and "Extend Window" and then right click on my data store -> Changed Data Capture -> Journal Data and I can see my new record in the Designer.
I have an interface with this data store as the source and I have the checkbox with "Journalized Data Only" checked ... but it just doesn't pick up on the new records in that data store's journal.
Is there something I am missing? I'm sure once I can figure this out it will probably solve my problem building the package to loop through and do this repeatedly as well.
Cheers
Damian

Hi, a bit more investigation and a bit more info, Arif, I wonder if you have any idea why it's doing this...
My source table is called S1SPK_DET
When I extend window in the designer and right click on the data source , it presents my new record, and the sql that it is running is looking at a view called JV$DS1SPK_DET (with a D following the $ ) with this query: select * from ODI_WORK.JV$DS1SPK_DET
But when I run my interface that is supposed to be getting the Journalized data from this table, in step four ( 4 - Loading - SS_0 - Load data ) the Loading query is looking at another view JV$S1SPK_DET (Without the D following the $) ... and this view is empty. I will paste the loading query below.
Does anyone know why I have these different views and why the load step looks at the empty one?
select
     S1SPK_DET.SPK_NO     C1_COURSE_ID,
     S1SPK_DET.SPK_VER_NO     C2_COURSE_VERSION,
     JRN_SUBSCRIBER     JRN_SUBSCRIBER,
     JRN_FLAG     JRN_FLAG,
     JRN_DATE     JRN_DATE
from     ODI_WORK.JV$S1SPK_DET S1SPK_DET
where     (1=1)
AND JRN_SUBSCRIBER = 'SUNOPSIS' /* AND JRN_DATE < sysdate */

RA data only updated in Controlling Area currency..

Hi Guys,
When we run the Results Analysis for WBS Elements, we are getting the message " RA data only updated in Controlling Area Currency ".
How can we make this message gone or why is the system updating only in CO Area Currency.
Thanks
Srik.

Hi,
The company code currency for this WBS is different from the Co Area Currency assigned in the Co Area definition.
However still system is updating only in the Co Area Currency.
Thanks,
srik.

Column headings are mismatched when export to excel (Data Only)

Hi All,
We have an old Crystal Web Portal designed using CE10 in VS 2003.   The crystal viewer shipped with VS 2003 exports to excel (Data only) in correct order where all the columns headers are matched with the corresponding data.
We have re-written the entire new web portal in VS 2008 with using CE10 on windows 2003 server. Everything works we can view the report, page navigation, export to PDF, export to MS Excel 97-2000.   However when export to MS Excel 97-2000 (Data only) option, the column headings are mismatched with the corresponding data.   I don't understand what changed between VS 2003 Crystal Viewer and VS 2008 Crystal Viewer.   I think this has to be the crystal viewer problem because I'm exporting from the viewer tool bar.
Here is the API referencing in the code:
In Visual Studio I'm referencing all CE10 10.0.3300 version api's. Howerver since Crystal Viewer with VS 2008 is newer and has 10.5.3700 version I'm using CrystalDecision.Shared and CrystalDecision.Web are version 10.5.3700.   These seems to have no problem. The entire web portal works fine.
More about Web Portal:
-User is validated upon login with CE10
-use selects the report from the list
-Report ID is then passed to reportdocument
-reportdocument API loads the report and
-Viwer.reportsource= reportdocument.reportsource
We cannot update Crystal Enterprise 10 right now.   I'm in the middle of deploying new web portal with VS 2008.   I have to resolve the Export excel (Data only) option and have the column headers matched with the data in excel.   I have tried everthing.
Can some help here.
thanks

Hi,
The report saves the printer information and if it can connect to the exact same printer then the print options will get passed to the printer.
If the report is being sent to a different printer, Crystal doesn't know if this new printer will support the same settings, ie. duplex or color. In our case we were setting the report to print duplex printing and landscape. When our application went to print it actually crashed because some of the printers didn't support duplex.
What we did is disable the print button on the viewer and added the PrintDialog control to our form. Use the ReportDocument.PrintOptions method to set the properties for the PrintDialog control.
var printDialog1 = new PrintDialog();
printDialog1.UseEXDialog = true;
printDialog1.AllowSomePages = true;
if (myLink.Parent.SavedPrinterSettings != null)
     printDialog1.PrinterSettings = myLink.Parent.SavedPrinterSettings; //Use any saved printer settigns
     printDialog1.PrinterSettings.Copies = Convert.ToInt16(copies);
     dr = printDialog1.ShowDialog();
     if (dr == DialogResult.OK)
     myLink.Parent.SavedPrinterSettings = printDialog1.PrinterSettings;     //Save the latest printer settings
     nCopy = printDialog1.PrinterSettings.Copies;               //Get the number of Copies
     sPage = printDialog1.PrinterSettings.FromPage;               //Get the number of Start Page
     ePage = printDialog1.PrinterSettings.ToPage;                    //Get the number of End Page
     myReport.PrintOptions.PrinterName = printDialog1.PrinterSettings.PrinterName;     //Get the printer name
     myReport.PrintOptions.CustomPaperSource = printDialog1.PrinterSettings.DefaultPageSettings.PaperSource;
     if (printDialog1.PrinterSettings.Duplex == System.Drawing.Printing.Duplex.Vertical)
          myReport.PrintOptions.PrinterDuplex = PrinterDuplex.Vertical;
     else if (printDialog1.PrinterSettings.Duplex == System.Drawing.Printing.Duplex.Horizontal)
          myReport.PrintOptions.PrinterDuplex = PrinterDuplex.Horizontal;
     else if (printDialog1.PrinterSettings.Duplex == System.Drawing.Printing.Duplex.Simplex)
          myReport.PrintOptions.PrinterDuplex = PrinterDuplex.Simplex;
Hope this helps,
Brian

Exporting to Excel data only using sub reports in Crytal 9

Post Author: pmstar
CA Forum: Exporting
I am using Crystal 9 verision.
I have .rpt file that used 4 sub reports .In the main report I placed all the sub reports in the(detail section) row and using the data for some caluculation in the main report to generate report fields.I placed the main report fields in next row( in detail section).However when i export the report .Its generating 5 empty rows and 3 rows with 0. I have pretty much followed the solution from the article "c2017620" published in BO.
Since i used the sub reports only to get some value for main report calculations .Is there any workaround for the following issue
1.I do not want to print the subreport data when exported to excel data only.
2.how can i get rid of the blank rows
We have a lot of reports which has the same issue and we need to get the reports to work in Excel Data only .The reports works perfect when used in PDF format but its mandatory that we need to give the reports to the client using Data only.
If possible, when responding with your recommendations, please include detailed steps. It would be very helpful.Thanks in advance,
PM

Post Author: swat
CA Forum: Exporting
Hi,
Of what i gather from ur scenario...this is what i did in one of my reports.
I had to use two subreports and they had to occupy one cell each, in line with other fields.
To obtain that,all the fields required in the subreport i put them into a text box.Therein restricting the fields to the txt box only...
Then import that sub-report as it is.
It worked for me....
try out...
All this only if've understood u right...

Why oracle "to_date" accepts Date-parameters

I tested out function "to_date" as you see below and I see that Oracle allows me to give to that function parameter with textual data type and also allows to parameter's datatype to be Date.
Connected to Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
SQL>
SQL> select to_date(sysdate) as s from dual;--21.10.2010
S
21.10.2010
SQL> select to_date(sysdate, 'DD.MM.YYYY') as s from dual;--21.10.2010
S
21.10.2010
SQL> select to_date('21.10.2010', 'DD.MM.YYYY') as s from dual;--21.10.2010
S
21.10.2010
SQL> select to_date(to_date('21.10.2010', 'DD.MM.YYYY')) as s from dual;--21.10.2010
S
21.10.2010
SQL> I entered into Search engine "http://www.lycos.com/" phrase "oracle to_date function" and it gave me link to documentation of that function:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/functions183.htm
and the documentation says:
>
Purpose
TO_DATE converts char of CHAR, VARCHAR2, NCHAR, or NVARCHAR2 datatype to a value of DATE datatype.
>
My question is: why the function accepts Date data types? what occures behind curtains when Date is passed in? Or what explanation there is, that documentation seems to lie?
Also, have you too noticed that the forum has been oftenly down near past days?

Any function that accepts a VARCHAR2 can be passed a DATE. Oracle will simply implicitly cast the DATE to a VARCHAR2 (using the session's NLS_DATE_FORMAT). The same way that it would implicitly cast a NUMBER to a VARCHAR2.
Of course, if the implicit conversion of the date to a string doesn't match the explicit format mask passed to TO_DATE, you'll have a problem. If your session's NLS_DATE_FORMAT was 'MM.DD.YYYY', for example, the TO_DATE would fail because Oracle would implicitly cast the date to a string in the format MM.DD.YYYY and then try to convert that to a date using the format mast DD.MM.YYYY.
Justin

Getting the last posting date

Hi everybody,
I need some help. I want to create a Bex Variable with Customer Exit, and i need to modify the ABAP code in order to get the last posting date of Data in my request. I'll like to create to create with BEx Query Designer a request that allows me to make my report on the most recent data only.
Eg. Let's say today before leaving the work I launch a routine that provides me during the night data for my R/3 system and I'm wonking in a BW environment. Tomorrow, i'll like to compose any request guiving me informations only on what i loaded yesterday without typing the date. I'm oblige to use a variable, but I need the corresponding Abap code. Can some one help me please ?
Thanks.

You want your query to return results from only the most recently loaded request. Is that right? You don't need a variable for that. Just bring in "Request ID" (from Data Package dimension) into Filter area and use "Last Request Loaded" variable delivered by SAP.

In va02 tocde after entering the data only storage location field is not saving.why?

Hai
in va02 tcode after entering the data only storage location field is not saving. why?

Hi Purnaiah,
Are you using any user exit for this or not?
Check for the below exit, this may be the place where you can implement your code for saving the value.
SAP MV45AFZZ calling the user exit with a form USEREXIT_SAVE_DOCUMENT
Regards,
Rafi

I used the ticker tape mode to add subtitles to a clip. When playing it in the pc, the Subtitles are fine, however, when playing it on the tv, only the top half of the words are visible. Any idea why?

I added subtitles to a movie clip using the ticker tape option. When viewing on the iMac, the words are visible, however, when playing it in the tv, only the top half of the words are visible. Does anyone know why?

I would agree with Keith Barkley, it may be the TV Safe Area. You can see what spots might be blocked out or cut off by going to iDVD and opening the original DVD project, under the View Menu > Show TV Safe Area. If your title gets cut off by the cropping rectangle displayed, that may account for the cut-off.

Why the 2LIS_08TRTK extractor can not get all data

Hello, BW Gurus.
Why the 2LIS_08TRTK and 2LIS_08TRTLP extractors can not get all data. I had used the RSA3 and get 10 registers, when a check at the VTTK table I had 20 registers, I didnt use filters at RSA3, could you help to know what happen o correct it.

Is it because
<i>
Shipment documents and their dependent objects (shipment stages as well as shipment items [deliveries in the shipment]) are only extracted into BW when the Shipment completion status has been set.
This is necessary because the numeric values that result from the delivery documents are only established at the time. If the data were already stored earlier in BW, the shipment data would not be updated if the delivery notes were changed in BW.
</i>
- from oss note 573470.

Why the tick "journalized data only" is disabled

Similar Messages

Maybe you are looking for