Why the time and date is not correct when I save a waveform in txt format, using Labview 6.1?

I am using Labview 6.1 and my operation system is Windows 98. The date/time properties is configured in the Windows (time and date in the control panel is correct). I generated a waveform using Basic Function Generator.vi and saved this using the Export Waveforms to Spreadsheet File.vi. When I opened this file the date and time was wrong. Only the delta t was correct and it did not show the date neither the time, only a float number. How can I adjust the correct time?

Actually, the date/time is correct, it is expressed as seconds since January 01, 1904.
In order to print the string version of the date/time from your file, you will need to write a utility that converts the date/time to a string or series of strings in whatever format you wish. This can be done by reading the first line (I assume that is the line with the time on it), formatting the date/time into a string, and writing over this information in the file.
The waveform VIs were meant to be used internally to read and write waveform data. Any use beyond that should require you to add formatting and other information/data as necessary.

Similar Messages

  • When I did 7.1 update on iPhone five my reminders no longer works correctly it automatically erases the time and date that I requested

    Can somebody tell me why my reminders no longer work correctly on 7.1 update on iPhone five every time I post a reminder it would delete the time and date of the reminder and my reminders do not go off.

    Remove Office 2008 for Mac using Microsoft deinstall procedure. Reinstall Office 2008 for Mac.  If there are updates, apply them. Using Disk Utility, verify/repair permissions on your boot drive.
    Does Office for Mac 2008 now work correctly? If not, you may want to repeat the above first sentence, and then update to Office for Mac 2011, and apply the latest (14.4.8) update which has Yosemite fixes.

  • In the advanced tab of languages and Region the time and date formats will not change

    For a certian Application I am using I need to change the format of the Time and Date. I had no problems in Mountain Lion. In the advanced tab of languages and Region the time and date formats will not change. I need the date format to read as 01/01/14 and time format to read 13:00. As I said this was easily done in Mountain Lion and all previous Apple OS. I suspect it's an issue with in the OS.

    You're right, it has been that way for a long time. I've never bothered reporting it as a bug since it's simple enough to deal with, but reporting it would be a reasonable thing to do.

  • Why the basic finish date is not adjusted in planned orders

    Hi, all.
    Can anybody help me to understand:
    "Why the basic finish date is not adjusted in planned orders during
    forward scheduling, but in production order basic finish date is adjusted?
    It is look like non-coordination between groups of developers.
    And lead to situation, when planner don't see in MD04 when he can really wait material receipt. He must go to planed order and check production data there, it's unusable."
    Am I right, or SAP have it's own logic.

    Hi,
    Production orders are different story. Since production order is a constant element, they are not created in the course of MRP, basic dates can be adjusted. In production order basic finish date is adjusted, but you won't see for the upper level materials', basic dates of the planned orders adjusted according to the prodcution order you create. Production order is consistent within itself in terms of date and is not dependent to other elements of MRP, but planned orders are not like that.
    MRP creates planned orders whose basic finish dates are calculated by subtracting goods receipt time from production start date of the source of requirement. MRP works backwards without changing directions. Meanwhile if any production finish date is calculated different than the basic finish date due to forward scheduling, in order not to violate the alignment between the basic finish date and source of requirement's start date, basic finish date is not adjusted. If it was, dates of all the planned orders calculated so far at the upper levels of the BOMs had to be recalculated, otherwise all the consistency of all the dates is violated. This cannot be done because changes in any level affects all lower levels.

  • How can I change the language of the time and date and numbers?

    Hey
    I bought the iPhone 5 and when I setted the settings I chose the country where I live now but the time and date and other numbers because in the language of the country and not in the language that I chose which Is english
    so how can I change them?

    Go to settings >> general and checkout keyboard, international and date & time.

  • My gradson got ahold of my grandaughters IPod touch and I no longer have a settings button.  The time and date on this is wrong.  How can I fix this problem.

    I need help...  I no longer have all of the buttons on my IPod touch screen.  My grandson got a hold of it and boom..  The time and date is wrong also, and I have no access to fix this problem.  There is no settings button.
    Any help would be appreciated.

    Assuming that by buttons your mean the icons for various apps are missing, use the Spotlight search feature (double click the Home button and go all the way to the left past the music controls) and search for: Settings. Go to Settings>General>Reset>Reset Screen layout and also correct the time inthe Genera settings.
    The Setting app can't be deleted or hidden via Restrictions.

  • How do you set the time and date for the fax on the HP Office Jet 4622 All-in-one Printer?

    I installed the HP Office Jet 4622 All-in-one Printer and everything works wonderfu.  However on the test page for the fax the time and date are showing Jan-00-00 00:00AM.  I do not know how to change the date and time.  Please help.  Thanks.
    This question was solved.
    View Solution.

    Use the Setup (wrench icon) button on the front of the printer to look through the settings menu to set the printer time and date.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Ipod touch always changes the time and date when synced

    Since I got my touch, even before any updates etc, every time I sync it the time and date changes, usually back about a week or so. Anyone else got this problem or any solution as its really annoying me. A cutting edge bit of kit that has practically every function that works so well and the clock and calendar cant keep time? weird....

    Not true in all cases, I updated to 2.0 and had 2 problems: One App had a Bug *NOT Apple`s fault*, and the second was another App ( again, not Apples fault ) that went back to home screen after opening. This was solved by a simple reset ( I have the first batch of Touches, 16 gb ). And the battery thing, I haven`t noticed it at all, I have an almost full charge, and have been using it for 4 days, never shut it down, only sleep mode when not in use.

  • HT1551 My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

    My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • How do I keep the time and date stamp of my photo when exporting from iphoto

    Hi,
    I notice the time and date stamp changed when I exported the photos from iPhoto 11 to a external HDD.
    When I looked at the information about the exported photos on my external HDD the time and date changed to the time and date of when I exported the photos form iPhoto instead of keeping the time and date information of when the photo was taken as it appears in iPhoto.
    I thought the time and date stamp is in the meta data of the photo file and can't be changed, am I correct?
    Thanks,

    Kyzelios,
    How can view the meta data from "finder" or do I need a 3rd party app?
    "Get info" function only gives me the creation date which is the export date and time.

  • Has anyone else had issues with changing how the time and date look on the status menu in Mavericks?

    I'm trying to make it so the year displays, but haven't been able to figure out how to change that. I have the Day of the Week, Month, Day and Time only and I haven't been able to figure out how to do that in the Date & Time or the Language & Region Settings.

    There is no option in System Preferences. However, it may be possible to set it with a "defaults write" command.
    This page shows how to set the time and date format in the Terminal, but doesn't show whether you can add the year.
    http://apple.stackexchange.com/questions/75116/i-want-to-change-clock-from-12h-t o-24h-mode-via-terminal
    If you can find a description of Apple's date format code that includes the year, then it may be possible. Or not.
    I'm guessing Apple thinks only Time Travellers need to ask what year it is...

  • Tell me what is ******* going on!!!????! The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!

    The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!
    I want to get a new iPhone to replace this defective phone. I am gonna be crazzzzzzzyyyyyyyy with anger,!!!,!,,,!  I takes2 hours to go to Regent street apple stores for three times!!!!!. It is a lot of transport fees !
    PLz tell me why! How to deal with it !

    Unless it's confirmed officially that your phone is defective, then you can ask for a replacement. Or you have to live with you. However you can trade it for a new one if you don't care the price drop.

  • TS1702 when i am trying to download new game from app store it showing "to check the time and date settings"?

    when i am trying to download new game from app store it showing "to check the time and date settings"?

    planb77  The OP said he has iOS 3. The Automatic in Settings>General>Time and Date was introduced in iOS 5. The OP just has to see if the time and date, included time zone, are correct.

  • HT5706 My Apple TV is frozen on the time and date setting and then it goes to the screen saver I tried changing the batteries on the remote and it still doesn't make a difference someone help

    My Apple TV is frozen on the time and date setting and then it goes to the screen saver I tried changing the batteries on the remote and it still doesn't make a difference someone help...has anyone else had these problems?

    Hi i ran into the same problem Ithoght it was the control, i changed the batteries the the control, and stil did not work, in the same connection (network and everything) i installed a new one and it worked perfectly, i can deduct the unit is nit working properly

  • How to know the time and date when someone empty trash?

    someone delete very important videos on my mac PC , i need to know the time and date of what happens on my pc for 2 days ago to can know who delete these files and when the trash being empty
    also, i tried very hard to recovery these videos by using Data rescue program but i found old videos instead of the last videos hasa been removed??? i don't know how???!!
    so can anyone help me please

    Open the Console app located in HD > Applications > Utilities
    Select System Log on the left.
    Type trash in the search fileld top right corner of that window.
    That should reveal the date and name of the file or files that were deleted but they cannot be extracted from there.

Maybe you are looking for

  • Batch match merge pdf documents from different sources

    Hello, I'm using Acrobat 9 Pro and I'm new to Acrobat in general. I have 500 clients who I want to send hard copy reports.  There are 500 pdf files with graphs/data, and 500 pdf files that are customized business letters.  They could be printed out a

  • HT3209 why is there not just a button I can click that will tell me, whether or not my system is able to play HDCP

    As the title says, I find it really difficult to verify whether or not the computers I use (PC) can play HDCP. There doesn't seem to be a "Click here to see if your computer supports HDCP"-type of link anywhere. It would be really nice if there was.

  • Issues in PR05 -- Transfer to FI

    Hi All, I want to know in PR05 T-Code under the settlement there is "TRANSFER TO FI".  Here my doubt is 1. How to assign this TRANSFER TO FI?? I tried to create a trip and i saved but i couldnt find any option like Transfer to FI. 2. If a trip has th

  • Retrieving rows in reverse order

    Hi all, I wish to retrieve row data in reverse order. Iam not retrieving the data in any particular sorting order, i just want a simple reversal of rows returned for eg. say initially data returned is Name Age abc 20 bbb 25 ccc 19 ddd 22 I want it as

  • Powerpoint 2004 on Mac OS X problems since Security Update 11.2.3

    I have a Mac OS X v. 10.3.9 Since the last Security Update 11.2.3 for Office 2004 , I started to have problems only with Powerpoint 2004. I can't open .ppt or pps documents that were working before neither I can't save new projects. I get Error Signa