Why the update 10.6.7 kills my audio, only works with headphones...!!!

Yesterday i've installed the 10.6.7 update of Mac Osx and my audio has gone. The only way that i can hear a thing it's with headphones...

Is there a red light in your headphone port? There is a little switch in there that sometimes gets stuck. Try plugging your headphones, or some different headphones in under it clears up.

Similar Messages

  • MBPro 17 Intel Core 2 Duo Audio only works with the headphones?

    MBPro 17 Intel Core 2 Duo Audio only works with the headphones?
    There is a red light constantly emitting from the headphone socket?
    I can not listen to sound unless headphones are plugged in - when taken out I get a red light and the volume controls kets seem locked?
    Please help!
    Julian

    Hi Kitty.
    Seems to be quite a popular problem. In another post, I posted the following.
    "The red light is the data signal that is transmitted if you plug in an Optical Audio device such as surround sound speakers. I had the same problem for a short while with my 17' MBP. Sound was working fine from my built in speakers but I plugged in some earphones to listen to something that I did not want the rest of the office to hear and after pulling the hearphones out, the optical signal (red light) was being transmitted. The switch Cessna is referring to is the switch that is triggered inside the port that tells OSX that earphones/optical audio device is plugged in and to shut down power to the built in speakers. When the device is un-plugged from that port, the switch should get triggered again and power up the built in speakers and disable the optical light signal. Perhaps there is the slightest defect on the earphones you are plugging in that are preventing it from triggering the switch when the earphones are un-plugged.
    Try a different sent of earphones to maybe trigger the switch if you are uncomfortable with the paper clip solution."
    That seemed to solve the problem for that user.
    The link to the post is http://discussions.apple.com/thread.jspa?threadID=895286&tstart=30
    Good luck

  • My sound on my MacBook Pro laptop only works with headphones.  How do I get the internal speakers to work?

    My sound will only work when I plug in headphones in the jack.  When I take them out, the volume button is on mute.  When I go into the sound preference it says Digital Out for the output.  Sometimes I get a red light when the headphone jack is at.  I have tried blowing in it and have put the jack in and taken it out numerous times to see if it will reset.  Nothing.  Any suggestions on what to do next?

    Go step by step and test.
    1.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    2. Reset PRAM.  http://support.apple.com/kb/PH14222
        Do this twice
    3. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:     "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • After Update, Whatsapp, App World ando so on only work with Wifi

    Hi
    I updated yesterday from 4.6 to 5.0, everything worked fine, but now I can only connect to Whatsapp and App World with Wifi :/
    It's a8520
    Thank you for your help

    try ditching whatsapp and re-installing it. see if it works for whatsapp only and then you know what to do with the others. Whatsapp has a lot to answer for. it killed my bold last year while i was in portugal. you try restoring a berry on a portugese laptop in a bar while you are drunk

  • My audio only works with the speaker on or the headset features turned on . normal phone mode is very faint

    The audio on my iPhone 5 is very faint unless i have the external speaker turned on, or I am using a headset. Does anyone have an idea what the problem is?

    Hi there davidfromwalpole,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    -Griff W.

  • Just to version 7.Like all updates,ad-ons get disabled.The ad-ons that was disabled,where I am not able to open my emails.Why can't FireFox have updates without disabling ad-ons we need to work with?

    Just to version 7.Like all updates,ad-ons get disabled.The ad-ons that was disabled,where I am not able to open my emails.Why can't FireFox have updates without disabling ad-ons we need to work with?

    ''guigs2 [[#answer-672422|said]]''
    <blockquote>
    NoScript stops cookies, please disable this addon/extension as well as make sure that the language en-us is installed.
    # 1) Open up the Firefox Preferences tab. You can do this by typing about:preferences in the URL bar.
    # 2) Click "Content"
    # 3) Next to "Languages", click "Choose"
    # 4) Select "English/United States [en-us]", click "Add"
    # 5) re-open "about:accounts"
    # 6) Click "Get Started"
    </blockquote>
    Thank you for replying. Unfortunately, I already did all of these things. As you can see from the below screenshot, the language is already set. Also, this screenshot was taken in Safe Mode, so NoScript is not enabled. About:accounts still says I need to enable cookies for some reason. So, this solution didn't work....

  • HT4623 Please  help!  i have just update my iphone 4s with 7.4 update and my phone is now asking for a password which i dont have.  I have tried my keypad lock i used before the update and also my itunes password and neither work, how do i rectify this ??

    Please  help!  i have just update my iphone 4s with 7.4 update and my phone is now asking for a password which i dont have.  I have tried my keypad lock i used before the update and also my itunes password and neither work, how do i rectify this ???

    Did you buy this iPhone new from an authorized seller?

  • Why the step-and-repeat function (command+d) isn't working in Illustrator CS5?

    Why the step-and-repeat function (command+d) isn't working in Illustrator CS5?
    I am trying this. Take an object, move it some inches on the right while holding the option key, so I duplicate it.
    Usually, I pressed on command+d to duplicate this action on and on (duplicate the object and moving it some inches away), but now it is not working.
    any idea?

    kwakoo,
    It may be time for the list:
    The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    If possible/applicable, you should save current artwork first, of course.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to at least 5 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
    https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • Mistakenly opened all the folders in my library of music and the Finder stopped working. Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing they reappear

    mistakenly opened all the folders in my library of music and the Finder stopped working.
    Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

    mistakenly opened all the folders in my library of music and the Finder stopped working.
    Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

  • I've just updated OS to 10.10.1 and Finder keeps trying to open and then closes every 2 seconds with the message Finder is not Available. If Safari is opened full window it immediately closes and will only work with window smaller than maximum.

    I've just updated OS to 10.10.1 and Finder keeps trying to open and then closes every 2 seconds with the message Finder is not Available. If Safari is opened with the window full screen it immediately closes and will only work with window smaller than maximum. Driving me mad! Any help please!!

    Hi Linc
    Thank you for your response.
    I'm a bit of an amateur so I hope below is the information you've asked for:
    Step 1
    23/11/2014 09:19:14.007 ReportCrash[294]: Saved crash report for Finder[4349] version 10.10.1 (10.10.1) to /Users/AAAA/Library/Logs/DiagnosticReports/Finder_2014-11-23-091914_BBBB-MacBoo k-Pro-2.crash
    23/11/2014 09:19:14.008 ReportCrash[294]: Removing excessive log: file:///Users/AAAA/Library/Logs/DiagnosticReports/Finder_2014-11-23-091840_BBBB -MacBook-Pro-2.crash
    23/11/2014 09:19:14.000 kernel[0]: CODE SIGNING: cs_invalid_page(0x103809000): p=4357[Finder] final status 0x3000a00, denying page sending SIGKILL
    23/11/2014 09:19:14.000 kernel[0]: CODE SIGNING: process 4357[Finder]: rejecting invalid page at address 0x103809000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
    23/11/2014 09:19:14.454 com.apple.xpc.launchd[1]: (com.apple.Finder[4357]) Binary is improperly signed.
    23/11/2014 09:19:14.454 com.apple.xpc.launchd[1]: (com.apple.Finder) Service only ran for 0 seconds. Pushing respawn out by 1 seconds.
    23/11/2014 09:19:15.584 Finder[4359]: assertion failed: 14B25: libxpc.dylib + 97940 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x89
    23/11/2014 09:19:15.000 kernel[0]: CODE SIGNING: cs_invalid_page(0x10bfbf000): p=4359[Finder] final status 0x3000a00, denying page sending SIGKILL
    23/11/2014 09:19:15.000 kernel[0]: CODE SIGNING: process 4359[Finder]: rejecting invalid page at address 0x10bfbf000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
    Step 2
    Process:               Finder [4626]
    Path: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
    Identifier:            com.apple.finder
    Build Info: Finder_FE-932001003000000~1
    Responsible:           Finder [4626]
    PlugIn Path: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
    PlugIn Identifier:       com.apple.finder
    -0 sec                         CODE SIGNING: cs_invalid_page(0x10c9a5000): p=4626[Finder] final status 0x3000a00, denying page sending SIGKILL
    -0 sec                         CODE SIGNING: process 4626[Finder]: rejecting invalid page at address 0x10c9a5000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
    -2 sec                         CODE SIGNING: cs_invalid_page(0x10c5b3000): p=4624[Finder] final status 0x3000a00, denying page sending SIGKILL
    -2 sec                         CODE SIGNING: process 4624[Finder]: rejecting invalid page at address 0x10c5b3000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
    -3 sec                         CODE SIGNING: cs_invalid_page(0x10f4bd000): p=4622[Finder] final status 0x3000a00, denying page sending SIGKILL
    -3 sec                         CODE SIGNING: process 4622[Finder]: rejecting invalid page at address 0x10f4bd000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
    -5 sec                         CODE SIGNING: cs_invalid_page(0x105ecf000): p=4620[Finder] final status 0x3000a00, denying page sending SIGKILL
    -5 sec                         CODE SIGNING: process 4620[Finder]: rejecting invalid page at address 0x105ecf000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
    -7 sec                         CODE SIGNING: cs_invalid_page(0x1012cd000): p=4617[Finder] final status 0x3000a00, denying page sending SIGKILL
    -7 sec                         CODE SIGNING: process 4617[Finder]: rejecting invalid page at address 0x1012cd000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
    --> __TEXT 000000010c966000-000000010ce55000 [ 5052K] r-x/rwx SM=COW /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
        __DATA 000000010ce55000-000000010cf53000 [ 1016K] rw-/rwx SM=COW /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
    0   com.apple.finder                                 0x000000010c9a521f 0x10c966000 + 258591
    10  com.apple.finder                               0x000000010c9977b5 0x10c966000 + 202677
    11  com.apple.finder                               0x000000010c988154 0x10c966000 + 139604
    12  com.apple.finder                               0x000000010c987e15 0x10c966000 + 138773
    13  com.apple.finder                               0x000000010c987d35 0x10c966000 + 138549
    14  com.apple.finder                               0x000000010c987cfd 0x10c966000 + 138493
    28  com.apple.finder                               0x000000010c96b960 0x10c966000 + 22880
    1   com.apple.finder                                 0x000000010c98a69d 0x10c966000 + 149149
    2   com.apple.finder                                 0x000000010c98aba7 0x10c966000 + 150439
    3   com.apple.finder                                 0x000000010c9795d2 0x10c966000 + 79314
    4   com.apple.finder                                 0x000000010c98aa0b 0x10c966000 + 150027
    5   com.apple.finder                                 0x000000010c98a952 0x10c966000 + 149842
    6   com.apple.finder                                 0x000000010c98a78a 0x10c966000 + 149386
    7   com.apple.finder                                 0x000000010c979496 0x10c966000 + 78998
    8   com.apple.finder                                 0x000000010c98a548 0x10c966000 + 148808
    9   com.apple.finder                                 0x000000010c98a410 0x10c966000 + 148496
    10  com.apple.finder                               0x000000010c983df6 0x10c966000 + 122358
           0x10c966000 -        0x10ce54ffb  com.apple.finder (10.10.1 - 10.10.1) <33C3024A-4A16-3485-B2B1-89FA33B9558A> /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
    Many thanks
    David

  • Ill.CS3 - Why can I only work with one sheet on the desktop? I want to design a multi page document...

    ill.CS3 - Why can I only work with one sheet on the desktop? I want to design a multi page document...

    Use this ancient work-around:
    Create mutli-page PDF | Illustrator

  • I have an ipod touch fourth generation, in the app store, whenever i click on the updates tab it automatically crashes. Restore doesnt work.

    I have an ipod touch fourth generation, in the app store, whenever i click on the updates tab it automatically crashes. Restore doesnt work.

    The poster is having a problem with his iPod.  Yu can't reinstall iTunes on the iPod.
    pdaly1 wrote:
    Re-install iTunes and make sure no third party skins are installed. They tend to cause crashes.

  • My iMessage only works with one contact in my phone. I text several people that have the iphone 4s, theirs works with other people. But mine only works with one person. Why?

    My iMessage only works with one contact in my phone. I text several people that have the iphone 4s, theirs works with other people. But mine only works with one person. Why?

    about message http://support.apple.com/kb/HT3529
    troubleshooting message http://support.apple.com/kb/ts2755

  • HT3932 Wireless Keyboard Update 2.0  his update doesn't work!  I'm at 10.5.8 on my old iMac G5, installed the update and brightness and volume just do not work.  What next?

    This update doesn't work!  I'm at 10.5.8 on my old iMac G5, installed the update and brightness and volume just do not work.  What next?

    I have a brand new wireless keyboard... so it's never going to work.  BUT... I found a sort of work round! 
    Since it's eyeTV that I want to control the volume more than the system volume I discovered cmd and up/down arrows do the job.  I gess I'll forgo the brightness function.
    I'm a little frustrated that it appears Apple seems to want to push me towards an upgrade of a perfectly serviceable iMac G5.  I'll be keeping it to watch TV, surf the web, wordprocess and let the macbook pro handle photos & video.

  • Hi, I've just downloaded Aperture 3.2 and transfered all my iPhoto Library but now when I use the Aperture program it runs at the slowest speed possible and is almost impossible to work with. It is constantly processing why is this?

    Hi, I've just downloaded Aperture 3.2 and transfered all my iPhoto Library but now when I use the Aperture program it runs at the slowest speed possible and is almost impossible to work with. It is constantly processing why is this?

    You can click on the text that says 'processing' in the main windows and it will open (toggle) the Activity Window, (can also be accessed via the Window menu -> Show Activity.
    It will tell you what Aperture is doing with more precision and perhaps even how many photos it still needs to process. It is generally best to wait until all that processing is done before you start working with the photos (well it is best to first turn of options what you dont want to use, perhaps Faces or Previews and then let it process the new photos).

Maybe you are looking for