Why there is autocorrection applied to user name field of Mozilla support page?

If I try to log in into Firefox Help page, there is a message "Please enter a correct username and password. Note that both fields are case-sensitive". But if I initially type my user name in wrong case, then I can't correct it on second attempt, because autocorrection miscorrects the case again.

Firefox does have auto-correction. You can set it to remember what you've typed in single-line text fields, and it will offer to complete what you're typing with a drop-down menu of words you've previously typed, but not try to correct what you've already typed.
See:
* https://support.mozilla.org/en-US/kb/password-manager-remember-delete-change-passwords
* https://support.mozilla.org/en-US/kb/control-firefox-automatically-fills-in-forms
Maybe you saved a username that had a typo? You can remove it by selecting it from the drop-down menu and pressing the Delete key.

Similar Messages

Why can't I delete a user name and password from saved passwords in iOS 7?

Why can't I delete a user name and password from saved passwords in iOS 7? I found them and they are not anything that I am familiar with? They are from a t-com.de. I have been to Germany in the last month. Not sure if there is any association. Any thoughts?

You found them ... where? Are they in Safari somewhere?
If so, do Settings > Safari > Clear History and Settings > Safari > Clear Cookies and Data
If that doesn't clear them (and they are from Safari), try Settings > Safari > Advanced > Website Data and clear that area.

Predefault "User Name" field with Login Name

Hi,
Predefault in "LS Medical User Verification" BC does not work. I tried to do the following but all did not work:
* Put a predefault value in the "User Name" field, System: Creator
* Create a calc field "SCR Login", calc value: LoginName (). Set predefault of "User Name" field, Field: 'SCR Login"
* Expose "SCR Login" in the applet. Field is blank in UI.
We are using the vanilla "LS Medical User Verification Applet" for user verification and we want to predefault the User Name field with the current user logged in. How can I achieve this?
Thanks,
Jasmin

Hi,
I believe Predefault/Postdefault will only work with NewRecord even and since the User Verification Popup Applet does not go to that event on load that is why it does not work.
Since the client wanted to default the user name with the current user logged in, we just removed the User name field from the popup applet and pass the TheApplication().LoginName() to the Authentication Business Service.
Thanks,
Jasmin

Feature Request: Add Skype option to user name field in contacts

Feature Request: Add Skype option to user name field in contacts
I know skype maintains it's own names but this is so you don't lose everrything when you move from one place to another. Or need to skype someone from an internet cafe with your iphone.

Why not simply add the field by modifying the template?

BP: can't edit "user name" field in section "employee data"

Transaction - BP, tab - identification, Change in BP role - employee.
why i can't edit "user name" field in section "employee data"?
Field is unchangeable only for one in a ~800 BPs.

Earlier it is possible to change the User ID field.
Guess that this might be ur prb
If this BP is used somewhere else I mean in some transaction/CRMD_ORDER/Support message,so it might be not possible to change this now....becuase the log will become incosistent.
for e.g. if in ticket XXXX i have been assigned as reporter as...BP no 10
Later you are assigning this to no 10 to some other person or ID ....
Then the log of CRMD_ORDER or ticket will become inconsistent because the BP is now assigned to a different person who never worked on the same.
Actualy i have faced this query during one implementation that why we are able to change the UserID of existing BP even if it is used in some transaction/message.
Might be this is a new correction in the recent release.
Regards
Prakhar
Edited by: Prakhar Saxena on Jan 16, 2009 10:10 AM

User Name field in fbl3n, fbl1n, fbl5n

Hello,
How should i add user name field in fbl5n / fbl3n / fbl1n?
Thanks

hi,
215798 FBL*N: Special fields are not displayed
Have you done the following :
In the Line item Display list in FBL3N follow this menu path: Settings
-> Special fields, and add field BKPF-USNAM from table BKPF.
The field is later available for display,and you can choose it from
the Line item Display list following this menu: Settings -> Display
variant -> Current. From the hidden list you can now choose the field.
If the technical name is shown for the fields, the special fields are
are all starting with '1-U_'. It's important, that you add the Special
field, if the field also exist as Standard field. The Special fields
are shown in the buttom of the Hiddden list.
Please still remember step 2 and 3 from note 215798.
reg
Madhu M

Why there is spaces between Web App module listings on a web page?

Why there is spaces between Web App module listings on a web page?
Here is the web page:
http://www.mazine.com/test/testpage.htm
And here is the CSS code:
http://www.mazine.com/test/css/tablestyle.css

I only used Photoshop for the layout. Then I created web-safe images for everything that I used for Dreamweaver. I uploaded the images to the internet and then image sourced them into the code so that they will be viewed properly in the correct circumstances. I haven't used HTML since about 2004 and I wasn't very good then. I've just been thrown back into it and I'm pretty much learning as I go. This is my second attempt because I wanted to make the newsletter more eye-catching. My first one is very basic and without a background image at all and that looks fine in pretty much all email clients. I tested it with Litmus. All except for Windows Live Mail, where the images didn't act as links but as static images. It works fine with the others I tested manually. Those being Gmail, Yahoo and AOL. I will try the display:block and get back to you. Thanks for your suggestions.

Ascontrol - prevent pre-population of User Name field?

OAS 10.1.3.3.0
Is it possible to configure ascontrol to not pre-populate the User Name field?
Our security audit has raised this as an issue. When we go to http://server:7777/em the login page already has User Name set to "oc4jadmin". We'd like to configure this to be blank, so that the username and password have to be entered.
I've looked at the HTML coming back from the server and it's hardcoded in;
input id="username" class="x4" onkeypress="return _submitOnEnter(event, 'loginForm');" name="j_username" size="30" type="text" value="oc4jadmin"Thanks.

If you know where the orighinal html/jsp is, you can modify it adding autocomplete="off"+ like this:
input id="username" class="x4" onkeypress="return _submitOnEnter(event, 'loginForm');"
name="j_username" size="30" type="text" value="oc4jadmin" autocomplete="off"If the input is prepopulated from browser, this should solve the issue.
Regards,
Dima.
Edited by: user7646812 on Mar 24, 2010 6:53 AM

JBO-26061, Null User Name and password not supported by thin driver

Hello !
I have just installed Oracle 8.1.6 on my Linux Box.My Jdeveloper is installed on Win 98 Box. Now I am trying to execute the Online Orders sample package provided with the Jdeveloper. I have followed the instructions provided with the Jdeveloper Tutorial sample. The test connection between the client and server are a success. The OnlineOrder test is also a success. When I run The Application.java Class then it is giving the
JBO-26061 error with details as Null user name and password not supported by thin driver.
Where I am wrong I dont understand. Pls guide?

jdeveloper is certifed to run on the win nt AND win 200 platforms only.
Please read the "Install notes" file (install.htm) before proceeding further.

Why does my computer freeze on Yahoo home page downloads and how do I shut off the Mozilla support page ?

When I try to download an article on Yhaoo home page the download freezes the computer and I have to use the " control alt delete " keys to turn off the download and get the computer running again.
How do I turn off the annoying and frustrating Mozilla Support page when booting up my computer? There ARE NO INSTRUCTIONS ON THE PAGE TELLING HOW TO DO THIS WWHHYYY NNOOTT !!!

Update Your Firefox to latest version of Firefox 17.0.1
'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Is there a API to change user name in portal security realm

Our portal application requires the functionality to change user login name which
maps to the user_name in USER_SECURITY table.
The com.bea.p13n.usermgmt.UserManager does not offer a API to change user name, so
my code changed it directly in the USER_SECURITY table by JDBC.
My concern is : other tables in portal db may also has the user_name which are not
be changed correspondingly, this may cause problem which I don't see now (e.g. Entity
table has user_name also).
Question is: is there a safe way to change user_name consistantly in portal database?
like a API or do I have to do it myself. If it is the second case, what other tables
I need to change.
Thank you for all your input.
Ellen

I also have a similar ?, is changing user name a normal case scenario or a big problem in portal
Please reply

User name field in Document Information Record

Based on our process design, we would like to use the user field to define the owner of the document (owner is the person in the organization, who initiates the creation of the document and owns it throughout the life-cycle of the document). An example would be the development of a new SOP (Standard Operating Procedure).
The advantage of this setup would allow us to use standard role 155 for sending workflow notifications back to the owner during the review and approval process of the document.
We would like to deactivate the automatic change of the user field, when a original stored in a secure storage area is checked out in edit mode. In this scenario, the user name that has been entered during the initial creation of the DIR will be changed to the active user (sy-user) that has opened the document for editing.
Has anybody come across this requirement? Is there a BADI for document management that could be activated when the document is checked out in edit mode to deactivate the change of the user field? If not, where would we have to apply a mod. to disable the update of the user field with the active user during editing of the document original.
Also, any other idea to make this work would be welcome.

Hi Fredrich
You would definitely be able to do this, I'm sure you could use the standard BADI on save to default this back to the original value, however, I see some issues with this, namely from a system audit perspective. Personally, I would rather change the original workflow and use a classification field (link it to table USR02 or USR01 to enable username searching) for the author to prevent it being changed.
By changing the value you effectively lose your search functionality in CV04N because if a user is searching for a document he/she just changed, this will not appear for user based searches because he/she is not the user listed in the DIR.
Regards,
Athol

Hide password and user name fields in secure form on landing page

On a landing page I don't want the password or user name displayed in the "secure" form because I think it will keep people from downloading our e-book. It will cause what some refer to as too much friction—visitors will feel that we are asking too much of them just to download an e-book so won't do it.
I found somewhere where the user name can be populated with the e-mail address, although I couldn't figure out where to put the code to make it work.
Can the password fields also be auto-populated and hidden so the user can access the secure zone to download the e-book never even knowing that they had a user name and password assigned to them?
I'd really appreciate some help here and please keep in mind that html and css is where my expertise stops so if there is a java solution I will need the code and how and where to add it.
Many thanks for your help.
John

This article just might point you in the right direction: http://kb.worldsecuresystems.com/853/cpsid_85381.html

How to show the User Name on the Cart.aspx page when a user is connected.

Hi,
I am trying to find how I can get the User Name and display it in the top of the Cart.aspx.
For the diplay point of view, this is fine (I have created a <Literal> with a property ID, and specified it in the prerender.)
However, i can not find anywhere how to take the UserID from.
Do you know if there is a way to get this Data?
Thanks.

I use something like this within the login control::
<%@ Import Namespace="netpoint.classes" %>
<%@ Import Namespace="netpoint.api.account" %>
private NPBasePage _bp;
    protected void Page_Load(object sender, System.EventArgs e){
        bp = (NPBasePage)Page;
        NPUser u = new NPUser(bp.UserID);
        Literal1.Text = u.FirstName + " " + u.Surname;

Why does firefox say certain websites like the website for mozilla support is not a secure website?

The websites to where I can check my status at the new school I am getting ready to start, my bank's website, facebook, and the website for the mozilla support are telling me when I go there that these sites are unsecure and the firefox will not let me access these websites.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Do you mean that you get the page that says that a secure connection failed?
Check out why the site is untrusted (click "Technical Details to expand that section) and if this is caused by a missing intermediate certificate then see if you can install this intermediate certificate from another source.
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the issuer of the certificate.
You can see more Details like intermediate certificates that are used in the Details pane.
If "I Understand the Risks" is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
Note that some firewalls monitor secure (https) connections and send their own certificate instead of the website's certificate.
*ESET setup -> advanced setup -> extend web and email tree -> SSL
*SSL protocol: Do not scan SSL protocol

Why there is autocorrection applied to user name field of Mozilla support page?

Similar Messages

Maybe you are looking for