Why there is no dependent req. passed from discontinued material ?

Dear gurus,
I set discotinue indicator=1, effective-out date and follow-up material. But, there is no dependent requirement passed from discontinued material material. That is I can't see the dependent requirement for the follow-up material. Anyone tell me the reason? Thanks!
Regards
David

I will test soon. Thanks to all involved.

Similar Messages

Anyone knows the difference between this Protocol Encryption status or why there status are different?

I am confused why there Protocol Encryption Status are different from each other they are all using AnyConnect client v2.5.
user 1 - AnyConnect-Parent SSL-Tunnel RC4
user 2 - AnyConnect-Parent SSL-Tunnel DTLS-Tunnel RC4 AES128
user 3 - Clientless SSL-Tunnel DTLS-Tunnel (this user is using an AnyConnect client, but when she connects her status show Clientless)

The 17" MBP has an extra USB 2.0 port and also comes with a FireWire 800 port.
As far as the GPUs go, they are the same: ATi Mobility Radeon X1600.
As far as the GPU-dedicated-RAM (VRAM) goes, the only difference is the amount (128MB vs 256MB). More VRAM is better if you are going to be running video intensive apps, eg. multimedia apps and/or 3D games. The VRAM is GDDR3 which provides greater bandwidth than the DDR2 technology used in the 512MB/1GB/2GB of 'main memory'.
There is, of course, the different CPU multipliers. The 1.83GHz has an 11x multiplier while the 2.00GHz has a 12x multiplier. The 2.16GHz CPU of the 17" MBP has a 13x CPU multiplier.
The Front Side Bus speed is the same 667MHz on all three models. It drops down to 167MHz at the boundary of the CPU to which is applied the above multipliers, ie:
667MHz FSB / 4 = 167MHz
167MHz x 11 = 1.83GHz
167MHz x 12 = 2.00GHz
167MHz x 13 = 2.16GHz
N.B. 167MHz is really 1000/6.

Dependent reqs for CBP materials

Hi all,
For consumption based planning (VB) material, in MD04, order released (OrdRes) for its parent material is displayed. Is it possible to show the planned orders too ?
Regards,
Yogesh

Dear,
For MRP type VB, dependent requirement (open prod order, dep planned order)will not pass from main material.
Because this is reorder point planning, so while MRP run system plan for procurement if the stock qty falls below the reorder level.
In MD04 you can see only P.R & P.O for VB type material.
While running MRP for main material, VB type material will not plan.
You have to run separately by MD01 or MD02.
Regards,
R.Brahmankar

HT201343 why there is no sound in airplay mode from macbook?

why there is no sound in airplay mode from macbook?

update your Macbook to 10.9.2
sleeping your macbook with headphones attached was known to have caused this issue in prior 10.9, but has been resolved.

HT1657 Why are there no credits on movies rented from iTunes?

Can anyone tell why there are no credits (movie credits ) with movies rented from iTunes?

Amy, until the copyright holders for TV content in the UK authorize Apple to distribute, there is nothing Apple can do.
The only way to buy from another country's store is to have a credit card with a billing address from that specific country. Again, these rules are set by the copyright holders not Apple.

Why has my iCloud calendar deleted everything from 31st august back to beginning of the year but everything from 1st September is still there!

Why has my iCloud calendar deleted everything from 31st august back to beginning of the year but everything from 1st September is still there! All the information was there this morning and now it's all gone!!

Welcome to the Apple Community.
Settings > Mail, Contacts, Calendars, scroll down to the Calendars section and change the sync option to something other than 'Events 1 month back'.

Why there's no beep sound alert when charging my iphone5 from totally drained battery?

Why there's no beep sound alert when charging my iphone5 from totally drained battery?

Thanks for your reply. But there's still no beep sound alert when it start to charge?

Why can't i send or receive text messages to some users from my iPad while there is no problem texting them from my iPhone?

Why can't I send or receive text messages to some users from my iPad mini while there is no problem texting them from my iPhone?

With the Apple iMessage app, You can only Message with other iOS users - iPads, iPod Touch, iPhone users and Macs running Mountain Lion or higher. With your iPhone, you can send standard SMS text messages to any phone, including Android phones.
The iPad cannot send SMS messages or receive them either.

Uploading my site to Adobe Business Catalyst and I noticed that it turns all my text into images? Why does it do that and is there a way to prevent it from happening?

I don't mind that Muse does this upon uploading my website, but once my text becomes an image on my site, it creates a light halo around my text making it fuzzy. Is there a way to prevent Muse from changing my text into images?

Hello,
I believe you are using System fonts for the text in the site. I would suggest you to use either Web safe fonts or use self hosted font options.
Please refer to the links below to understand how to work with them.
http://tv.adobe.com/watch/learn-adobe-muse-cc/web-safe-vs-nonweb-safe-fonts-in-muse/
Add self-hosted web fonts | Adobe Muse CC tutorials
http://helpx.adobe.com/muse/using/typography.html
Regards
Vivek

Is there a way to prevent LR from reducing size (pixels) of files transfered to Photoshop as a psd file for editing?

The subject line says it all. I have discovered that LR reduces the size of files transferred to Photoshop for further editing when compared to the same RAW file processed in ACR in Photoshop. For example, a psd file created by LR from a 36 MB RAW file will typically result in a 100 MB psd file. The same RAW file processed similarly in Photoshop will result in a file around 300 MB. This makes a huge difference when the files are converted to JPEGs for printing. The smaller LR psd files result in JPEGs typically under 500 KB where the Photoshop JPEGs are typically around 1.5 MB.

Whew! I didn't think this would turn into such a long discussion!. OK - my error, spatial data not color. But that is loosing focus on my question. My objective is to get the best print possible from the final JPEG file used for printing.. As previously noted, for a given RAW file w/similar adjustments but with one processed in LR and the other in PS , a print made from the larger of two resulting JPEG files, the larger JPEG file resulting from only PS ACR processing (i.e., no LR) will result in a better print. Elie-d appears to have answered my basic question. If LR will always pass a 103 MB file then I assume there is no way to change this size. In case anyone is interested here is some additional info for consideration. Both LR & PS using 8 bit mode and 240 ppi.. Procedure in LR: 1) download RAW files from camera CD; 2) make adjustments to photo; 3) using Edit in External Processor, photo transferred to PS in PSD format, 8 bit. 4) file size around 100 MB (103 MB per elie-d). Procedure in PS: 1) download RAW file to hard drive with Nikon View2; 2) open file in PS - auto opens in ACR; 3) apply essentially the same adjustments (e.g., exposure, highlight, shadow, etc) ) as applied in LR; 4) file opened in PS editor; 5) resulting PSD file size with no further processing (i.e., no layers, etc.) is 310 MB). The resulting JPEG file created from the LR PSD is typically less than 200 KB whereas the JPEG from the PS PSD will generally be around 1.5 MB. As an academic question it would still be interesting to know why one gets different size PSD files from LR and PS and what, if any, affect this has on print quality. As for now I will not use LR to process RAW files. I prefer the larger PSD & JPEG files I get using just PS

Why are burned DVD's poor quality from the IDVD?

I made a slideshow in iphoto and exported to IDVD so I could burn copies. The show lloked great on screen but the first copies on dvd's were terrible. The quality of images are very poor and seem to be depixilated? Why would the copies be so poor? Does the widescreen or standard have something to do with it??
Help

Hi
There are levels in h*e*l*l*
iDVD - is same as DVD Standard - Interlaced SD-Video
Feeding iDVD progressive or HD material will not improve result but degrade this as from
- iMovie'08 to 11 - as they can not deliver - but only every second line of the picture
- iDVD downscaling from HD - is doing a bad job
So by using a program that can deliver - best possibly DVD is the result
- iMovie HD6
- FinalCut any version
- FotoMagico™ - (for SlideShows)
If this is not enough - then DVD is no option as HD-DVD is rare and needs special HD-DVD-players - alt
• Blu-Ray e.g. from Roxio Toast™ but still needs BD-Player as PlayStation3 etc
• out in high quality to USB-memory to be played on device that can do this
• Play via MacBook and out to a HD-projector/TV
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

Dependent req in md04

Hi, the bom of finish consist of a raw materail. strategy 40 maintained for both materials. sales oder created and mrp run md02 taken place. in md04 for finish product planed order generated for sales order qty. for raw material also pr generated for sales order qty and one more line appears as dependent req and qty also same as sales order qty. pls explain why we need this dependednt qty row, its important? because it is already shown in mdo4 of fert material. instead of checking 2 times in md04 for both fert and roh materials individually, is there any way to see in single screen for both fert and roh matrials? pls advise.

Hi,
I guess you have created a sales order with 2 lines i.e. one line for the finished product & another line for the raw material.
If my understanding is correct, then what you're seeing is correct. In MD04 for the raw material there is one PR which is linked to the sales order & the dependent req. which you're seeing is because the planned order of the finished material.
You need the raw material to produce the finished material & hence the dependent reqmt. & since you have a sales reqmt for this raw material there is a PR for it.
To view in single screen, in MD04 of the finished material, select the planned order line & click on Order Report for the Element, you should find the icon in the bottom part of the screen in stock requirements list.
Hope the above answers your query.
Regards,
Vivek

Every once in a while, letters stop working on my keyboard. I have to restart to get them to work again. Happens about once a week. Why and how do I keep this from Happening?

Every once in a while, letters stop working on my keyboard. I have to restart to get them to work again. Happens about once a week. Why and how do I keep this from Happening? An example is: I try to type Super Excited and the U, E and P won't work. But once I restart, all the letters work.

It could be an accumulation of all sorts of bits of info and depending on the last time you cleared the system cache either manually or via a factory reset on that phone you might find a difference there after doing so with many other system caches.
Clearing the application cache removes temporary files and frees up memory - your personal settings or information remain intact.
Be sure you clear only the application cache and not the application data.
From the home screen, tap Apps.
Scroll to and tap Settings.
Tap More.
Tap Application manager.
Swipe left to view the All tab.
Scroll to and tap an application.
Tap Clear cache.
You've now cleared the application cache.

Why there r two functions (do post & do get)

why there r two functions doget() & dopost() while any code can run in any of them and give me the same result.
sure, here is difference but what this difference ?
thnx in advance

thnx shudha
this thread is very good, i pasted it here to clear the vision for otheres too:
There are two points between GET and POST
01) Amount of information u can get.
02) Post is secure for getting Passwords and credit cards numbers.
GET puts the form values into the URL string. GET is limited to about 256 characters (usually a browser limitation) and creates really ugly URLs.
POST allows you to have extremely dense forms and pass that to the server without clutter or limitation in size. e.g. you obviously can't send a file from the client to the server via GET.
Below lines are from http://www.microsoft.com/windows2000/techinfo/reskit/en/iisbook/c06_the_difference_between_get_and_post.htm
QUOTE
The GET method, which was used in the example earlier, appends name/value pairs to the URL. Unfortunately, the length of a URL is limited, so this method only works if there are only a few parameters. The URL could be truncated if the form uses a large number of parameters, or if the parameters contain large amounts of data. Also, parameters passed on the URL are visible in the address field of the browser�not the best place for a password to be displayed.
The alternative to the GET method is the POST method. This method packages the name/value pairs inside the body of the HTTP request, which makes for a cleaner URL and imposes no size limitations on the form�s output. It is also more secure.
UNQUOTE
Hope abv will help.

2 questions, what do i do when a audio book i purchased is not in purchased menu for re downloading for my account, or why cant i re download the book from iTunes store with out paying for it after support they told me i could.

what do i do when a audio book i purchased is not in purchased menu for re downloading for my account, or why cant i re download the book from iTunes store with out paying for it after support they told me i could.
i tried to re download a purchased audio book after i contacted apple support team for iTunes they said it would be ready for re download or they said id have to re download it from iTunes store i cant remember, so i tried both couldn't re download it from purchased menu and the book id have to re download from iTunes store costs money as if i have never purchased what do i do? I don't have any warranty any more or money to purchase another warranty.

Babowa
Thank you for your prompt reply. I have bought 1 MacbookPor 17, 1 Macbook air, 1 MacbookPro 15 , 2 ipads, 3 iphones, and this iMac27 and 2 of iMAC24 or 20 not sure   but I do not recall ever doing what you are telling me in your reply.   When you get a extended car warranty, you don't   sign up for it.. it is just there and is included in the sale.   You don't buy this warranty to use it.. You buy it, in case something happens.   Here a perfect iMAC with minimum 100 hour useage has a dead drive. That is not normal and I should not have to even be requesting anything since most MFG offer a 3-5 year warranty on their disc drives and I believe that is probably passed on to Apple regardless if an extended warranty is purchased or not.   Customer service dictates a more flexible approach to make sure the lifetime value of a customer is not lost due to some misunderstanding.
I was in the MacStore that I purchased the unit..and they found and pulled the invoice and confirmed
the purchase of it in front of me. I had paid with credit card and fortunately it was there in their system.   I do not also recall recieving any box or paper although most everything I ever get remains sealed.. I am not in the habit of opening anything since I have never encountered any serious issues before.
   I have used my Macbookpro warranty 1 time and that is all throughout the years I have been investing in Apple equipment.
I just recieved a letter from the store asking me to get the paper to them so they can register it... I don't recall getting any paper actually. But I do have several boxes sealed here.. On this iMAC27, it was a hurry up and get it done thing and I don't remember taking anything extra with it.   Regardless, my request does not seem unreasonable.
Thank you

Why there is no dependent req. passed from discontinued material ?

Similar Messages

Maybe you are looking for