Why there is no screen control feature?

Gurus,
I am wondering why we don't have a feature P0000 for screen control of ifo type 0000
We have control feature such as P0001 for other info type 0001 etc.
Just curious!!!
Any thoughts?
Thanks,

Hi Thaman,
Screen control features are for those infotypes where you are recording certain things which can be difft. for difft. country versions. Like for eg. in USA you have SSN on IT0002 screen while in case of UK you will have National Insurance Number and so on for difft other countries.
So here comes these features where as per based on molga and the return value from the feature based on var key they determine which screen to show.
Now if you will look IT 0000, its very standard and have no such field which you will think that this can be difft. for various countries.
So as there was no need to have difft. screen no need to have control feature P0000.
Hope this will resolve your query.
Regards
guds

Similar Messages

Is there an on-screen touch feature that can be purchased to save wear and tear on the home/escape button?

Is there an on-screen touch feature for iPad 2 that will save wear and tear on the home/escape button? If so, what's it called and where can I buy it?

And if you are running iOS 5, you can enable Multitasking Gestures in the General settings. This enables you to quit out of an app by just pinching with four or five fingers. That saves a lot of use of the Home button.
Regards.
Message was edited by: Dave Sawyer - sorry, Meg, didn't mean to be redundant.

Is there screen control at the Subtype level for ESS Address in ECC 6.0?

Hello Developers,
The Dynpro view for adding/maintaining ESS Address information requires certain fields to be entered regardless of the type of Subtype (ex. Permanent Address or Work Address).
It's ok for our Permanent Address subtype to require certain fields such as City, State, and Postal Code, but we don't want these same fields to be required for our Work Address subtype.
Is there a way to control this for individual subtypes?
Thank you,
Terry

Thank you Shikhil,
This was already tried and didn't work.
Running a debug session, I can determine that the message is coming from the back-end SAP system. I can also see that these fields are flagged as Required on the back-end but due to the complexity of the code I haven't been able to determine what table this is read from.
The IMG view for "Infotypes - country-specific settings" apparently doesn't control this either but I'm hopeful that there is a screen control that will allow me to remove the "Required" setting.
Terry

Nokia 701 call screen lock feature?

Hi nokia community,
was wondering if there is call screen lock feature in nokia belle? Because i couldn't find it any where in my nokia 701, even there is no option to edit the normal lock screen or button?
Why there are bugs and such small and important features are missing in nokia's belle OS?
Please help me feel like i'm using a smartphone.
Any help would be highly appreciated.
geekObelle
Solved!
Go to Solution.

Hmm..I am not sure..call nokia care in your country.
I am not having anything to complain about regarding how my 701 behaves with incoming calls or things about "lock screen"..sorry.
PS Try out "Nokia sleeping screen" for nice "lock screen" features when phone is asleep..Nokia store..
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

Chat& - Screen Control

Is the screen control available in the latest LCCS SDK just like the screen control which is in the http://connectnow.acrobat.com product? Specifically, while screen control is active, is dual cursor control enabled in the LCCS SDK version just like in the connectnow product? In other words, whoever is moving their mouse over the area is moving the cursor?
Thanks,
Joseph Balderson
Flex & Flash Platform Developer
http://joeflash.ca

Thanks Nigel, found it in the 10.1 SDK docs. Now that I've played with it for a few days, I am happy to see that the screen control allows for cursor sharing just like in Adobe ConnectNow.
If I could make a request for the next version of the connect add-in, enable the screen control feature to change the controller cursor to sync up with that of the publisher, so that in a co-browsing situation, the controller knows when they have rolled over a web link in the publisher's screen.
Thanks,
Joseph Balderson
Flex & Flash Platform Developer
http://joeflash.ca

Why cant I use the screen record feature on quicktime 7.7.2

i have recently got apple QuickTime player 7.7.2 pro. One of the main reasons I got it is because i knew in past versions they had the screen record feature, but on the 7.7.2 pro version it didn't. i was disappointed that it didn't have the feature that the other versions had. before i got it i decided to update the version I had (The one with the screen record feature) and now i wish i didn't update it. I think the screen record feature was cool and i dont know why its gone. Also i am using windows.

QuickTime Player Pro has never included screen capturing features.
QuickTime X (found in Snow Leopard, Lion and Mountain Lion) does include screen capture features.

There is no entry for this function in Table 168F (system table). An error involving the screen control has probably occurred.

Hi All,
i created one enchancement to ME21n screen,
i added one screen at header
When i running the the transaction ME41 it shows the following error.
This function not defined
Message no. 06006
Diagnosis
There is no entry for this function in Table 168F (system table). An error involving the screen control has probably occurred.
Procedure
Contact your system administrator.
Am i need to add this functionalty to any sap table.
plz guide me on this.

Hi Krishna
Have you added any buttons in the custom screen if yes then you will have to maintain configuration data for Function code processing.
Please search on SCN for the same
Nabheet

Why there aren't any bluetooth-based car accessories to control the iPod ?

Most bluetooth accessories for the car are to control cell phones... I wonder why there aren't any to control (& receive data/songs from) the iPod.
I know that the iPhone would have bluetooth builtin.
So, it makes sense to have bluetooth-based accessories to talk to the iPhone/iPod, especially if these accessories can be hooked to those buttons on the steering wheel or some buttons on the dashboard... This way, nobody needs to fumble with the iPod or iPhone to switch songs...

did you even google search for something liek what your asking about.
i did and this is the first thing i found.
http://sewelldirect.com/Scosche-iPod-Bluetooth-Car-Kit.asp
GFF:)

HT1386 Why doesn't my screen look like this ? There is no place to choose anything to sync on my screen

Why can't I choose what I want to sync ? There is no screen like is shown in support. The last update of iTunes doesn't give me chooses

Connect your phone to iTunes, then click on the name of your phone on the left side of iTunes under Devices. To the right you will see tabs representing your sync settings (Summary, Info, Apps, etc.). One of the tabs is Music and one is Podcasts. On each, you can check Sync Music and Sync Podcasts and set the specific music an podcasts you want on your phone. When you're ready, click Apply at the bottom to sync your phone and transfer the media you selected on each of these tabs to your phone.

HT201272 Can somebody tell me why there is no "purchase" button on my screen? I pull up my wish list- and am ready to purchase- but cannot find the button. I feel stupid- but it's just nowhere to be found on my screen. Please help.

Can somebody please tell me why there is no "purchase" button on my screen? I go to my WISH LIST and am ready to purchase but I cannot find the button. I feel ridiculous. Please help.

There used to a 'buy all' button on the wish list screen but for some reason that has been removed from the current version of iTunes, you can only buy items individually by clicking on their prices (not the downward pointing arrow next to the price).

Why does my Imac screen slide and I lose my screen? It goes back to my desktop. Then sometimes my screen goes to full screen and I don't know how to get out of it.

Why does my Imac screen slide and I lose my screen ~ It goes back to my desktop.
Then sometimes my screen goes to full screen without me doing any commands, and I don't know how to get out of it without going to force quit and starting all over.

Hi,
When it goes full screen try moving the mouse up to top right of scren & see if there a double diagonal Arrow to click on.
On the other see if it's the silly implentation of Spaces/Mission Control/Expose in ML...
https://discussions.apple.com/thread/4298411?start=0&tstart=0

My App Store is showing white screen on features and charts display

My App Store is showing white screen on features and charts display. Any ideas what I should do?

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

All fields are not displaying in the infotype screen control

Hello Everybody,
All the fields from infotype 2001 and 2002 are not getting displayed in the screen control for these infotypes and
when I checked the screens for these infotypes, the mod. groups/functions has not been set for field 'Group3' for those
infotype fields.
Is there a way I could set this field ' Group3' for these infotype fields also ? Can it be done thru screen exit and if yes could
anyone tell me what's the screen exit for these infotypes ?
Thanks
Alok

solved it myself.

Why doesn't the volume control settings allow a greater range (on the low end)?

Maybe my ears are really sensitive, but for every iphone I've had, the lowest volume is not low enough. My phone is often louder than I want in my headphones even at the lowest setting. I find myself trying to lower the volume but ending up in silence. After putting it back up to the lowest setting, I end up clicking down again a few minutes later because it's too loud for my surroundings and situation. It's a huge volume jump from the lowest setting to completely off, and alot of times the lowest setting is too loud (even with normal buds or headphones).
The volume limiter setting only limits the upper end, but doesn't change the lower end (just makes the 16 set increments smaller in that reduced range). I know there is also an option to turn down the volume of individual songs in iTunes options, but this problem applies to all aspects of the iphone beyond just my music library (Music apps, Videos, etc.).
Why hasn't apple expanded the lower volume limits? There has to be a way, or is this not possible? Can anybody think of a way to fix this problem?

Meg St._Clair wrote:
Look for headsets with a volume control.
I did exactly this for awhile. I used to have Skullcandy Asyms with the inline volume attenuator (wheel). They've since discontinued them, and my 5 pairs are having wire connectivity issues. All their current models have iphone like volume mechanisms. The problem is most headphones with volume controls tap into the phones own volume control (so the set 16 volume increments). I also looked into using a dongle attenuator, but having the dongle hanging off the phone is just awkward and not easily adjustable.
I don't know why there can't be some form of internal attenuator option, or some other way of extending the lower range of volume.
Does anyone else have this problem of the iPhone being too loud in semi-quiet environments?

In converting a .docx file to .pdf the the Word functionality of linking screen tips to hyperlinks is lost. Why? How can screen tips be saved in pdf if at all?

In converting a .docx file to .pdf the the Word functionality of linking screen tips to hyperlinks is lost. Why? How can screen tips be saved in pdf if at all?

Thanks for replying. I am converting from MS Office Word document to Adobe Acrobat Document and opening with Reader XI - sorry my mistake.
I now notice another problem. On trying to open a specific hyperlink in the pdf version I get the message 'Acrobat does not allow connection to: www.biblegateway.com'. Why would there be a restriction?

Why there is no screen control feature?

Similar Messages

Maybe you are looking for