Why this difference between OTA and Ovi suite upda...

I have a doubt about the recent Anna update that was available for S ^3 phones.I updated my C6-01 thru OTA and the size of the update was 26MB. Including the other additional 4 updates the total update size was around 80 to 90 MB. But on Ovi suite or NSU the update was reported to be around 270MB by the users here. Why this huge difference between the two methods of update? So does that mean there is any difference between updating via OTA and PC?
In Love With My C6-01:Now running on Nokia Belle!

The difference is Ovi suite install is like installation from a clean slate. It installs everything from top to bottom as a fresh installation. But via OTA, the installation does an install of only the files that need to be updated or additionally installed for the fresh OS. So only the big difference in size. So in reality both the methods are more or less the same...
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

Similar Messages

Difference between commandToolbarButton and commandButton

Hi,
What is the difference between af:commandToolbarButton and af:commandButton?
I have a problem when I use the first one, but it works fine with the other. I would like to understand differences between them, so I could try to locate my problem.

Check this: Difference between CommandButton and CommandToolbarButton? (Loading popup )

Report - quantity and value difference between delivery and invoice?

Hello experts,
My client use u201EProof of deliveryu201D t-code: VLPOD. There is always quantity and value difference between delivery and invoice.
Do you know any report which will show this differences between delivery and invoice?
Best regards,
Maciej

Hi,
Note 867678 - Proof of delivery (POD), delivery and billing document will help you to understand POD flow.
You have the tcode VLPODF/VLPODL/VLPODA, but perhaps they will not help you. So, as the before note suggests you, you can use the tables VBFA, LIKP, LIPS, VBRK, VBRP, TVPOD and TVPODG to do your own report.
I hope this helps you
Regard,
Eduardo

What is difference between PC Suite and Ovi Suite?

What are the main differences between PC Suite and Ovi Suite and are there any advantages in using both please?

/t5/PC-and-Mac-Software/I-am-new-so-PC-Suite-or-Ovi-Suite/td-p/663858
If my post helped you, click on Kudos button and if my solution provided is opt 2 u, accpt my solution

Difference between 32 and 64 and why is 64 your preference

Hi, can someone please explain the difference between 32 and 64 bit and why the 64 is a preference for some of you? I'm more concerned about peripherals and printers working with Vista Ultimate on 64bit, before purchasing and installing CS4 onto a new computer. Thank you.

Bear in mind that to run 64 bit you need (a) a computer able to do
this and (b) the 64-bit edition of Vista (not the normal one).
Good things:
* Can run 64-bit programs that use more than 2 GB (Photoshop CS4 will
be one of these).
* Can use more than 3 to 3.5 GB of RAM in total
* Each program can use up to 2 GB (if available)
* The excess is available for cacheing disk
Bad things
* Driver and software availability needs checking. Little things may
not work (e.g. in Acrobat, PDF preview in icons). Or big things.
* 64-bit applications will need 64-bit plug-ins
* Less mainstream, overall support may be more limited if things don't
work.
* 64-bit programs are a little larger and use a little more RAM than
their 32-bit equivalents.
Myths
* "64 bit programs will go faster than 32 bit programs". Myth, unless
the program can make use of more than 2 GB of RAM.
* "All programs will go faster in 64 bit Windows". Myth, unless the
extra memory you can use reduces the amount of disk operation.
Aandi Inston

Why there is a difference between Router and PIX ACL

Hi,
I have a very basic question about the differences beween ACL behaviour in PIX and Router.
In Router if we put an extended acl entry and want to remove an mid entry then either we have to clear the entire ACL or remove the entries all the below.
Whereas in case of PIX we can remove any of the entry.
Why this difference is there.
Would appreciate your quick answers.
Thanks
Irshad

The PIX OS is designed such a way. Anyway, even in routers you can remove a mid entry by configuring named access-lists. You need not clear the entire ACL in this case.
ip access-list extended ROUTER-ACL
permit ip host x.x.x.x host y.y.y.y any

Why is my SSD showing 250mb/s difference between read and write...

So i have recently upgraded to a SSD in my 2011 MBP. 2.4Ghz i5 16Gb RAM. I swapped my HDD with a Samsung 840 Series 250Gb SSD, I noticed a huge speed bump. See attached photos. Read is clocked at 503MB/s peak, and Write is clocked at 260MB/s peak on the SSD. My Question is why is there a 250MB/s difference between read and write?? Using Black Magic Disk Speed test. Mac OS X 10.8.4 Beta.
Thanks

Writes are performed very differently on SSD than they do on a hard drive, and it is common for SSDs to have lower write speeds than reads.
It's actually quite interesting if you're a geek: http://en.wikipedia.org/wiki/Write_amplification
As long as the speeds do match your manufacturer specification for the model (and they do: http://www.samsung.com/us/computer/memory-storage/MZ-7TD250BW ) , there is nothing to be concerned about.

Why would i connect a external hardrive to the airport extreme and what is the difference between LAN and WAN gigabit ethernet?

Hey just wanted to know what is the reason i would connect my external hardrive to the extreme and what is the difference between LAN and WAN ehternet. I know one is local and other is wide but can someone explain in simpler terms.

Connecting a hard drive to the Airport Extreme makes it available to be shared across all the computers on your network.
WAN (Wide Area Network) is your connection to the internet
LAN (Local Area Network) is your internal (or local) ethernet connections (computers, printers, etc...)
AirPort Base Station: About the WAN and LAN Ports

Can you tell me some differences between R2 and R3 systems?

Hi,
Can you tell me some differences between R2 and R3 systems?
I guess R2 is used only for mainframe systems some time back. But i dont know why we prefered R3 over R2.
Please clarify this!
Thanks,
Venkatesh.R.

SAP R/3 is
Client server
3 tier
Presentation
Application
Database
Relatively hardware and database independent
ABAP/4 applications runs on application servers.
Dispatcher, shared memory, gateway, work processes are major components of an application server.
SAP R/3 offers
Comprehensive suite of integrated applications meeting the needs of most business
Best practice process design
Ability to configure to
Industry sector
Unique business requirements
In a R/2 System - it is a 2 Tier System based on Mainframe Systems with Intelligent terminals
R/3 is based 3 tier Client Server architechture and supports the R/2 system as well.
R/3 Middleware -
Client server
Uses underlying relational databases
Oracle
SQL server
Ingress
Sybase
Its graphical user interface
Sap GUI
hence R/3 is preffered over R/2 systems because they support Client Server Architecture which is easily configurable,scalable and can integrate with ERP systems and integrate with SOA or Web based Apps.
Thanks,
Saurabh Shukla

What is the difference between LH and LX modules?

I would like to know the difference between LX and LH SFP modules. Long Haul ( LH ) denotes longer distances while Long Wavelength ( LX ) denotes less energy which is obviously shorter distance. Why does Cisco use both LX and LH for certain SFP modules?
Do they denote the capability of the module to work both for MM ( which will be Long wavelength ) and SM ( Long Haul ) fiber? Do correct me if i am wrong.
What does it infer if a modules says like "Cisco 1000BASE-LX/LH SFP" ?

What does it infer if a modules says like "Cisco 1000BASE-LX/LH SFP
Generally a module is either made for single mode (More distance) / multimode (short distance). But this module can be used for both Single mode and Multimode.
If used with SM fiber it can go upto 10Km
It used with MM it can go upto 550meters (depend on what kind os MM fiber you have) You need a mode conditioning patch chord too with legacy MM i think OM1 and 2.
Long Haul ( LH ) denotes longer distances while Long Wavelength ( LX ) denotes less energy which is obviously shorter distance. Why does Cisco use both LX and LH for certain SFP modules
Read this link and dont worry about LX/LH (You will ge tthe distance mentiond above depending on the type of fibe ryou are using)
http://en.wikipedia.org/wiki/Gigabit_Ethernet
Before it was standardized 1000BASE-LX10 was essentially already in widespread use by many vendors as a proprietary extension called either 1000BASE-LX/LH or 1000BASE-LH

What is the difference between start() and run()

Hi:
what is the difference between start() and the run()???
in my app, i have
Console.debug( "starting thread to listen for clients" );
_server = new Server( this );
_server.start();
_server extends Thread..
why everytime i use server.start(); my app will terminate on it is own, even though in my servr.run() method, i have a while loop
and if i call _server.run() explicitly in my code, that while loop will be in execution
can someone let me know??
thnx

what is the difference between start() and the
run()???start() is a method on Thread that tells it to start.
run() is a method in the object that the thread executes.
why everytime i use _server.start(); my app will
terminate on it is own, Err.... I'm not convinced this is true. It'll throw an IllegalThreadStateException, if you try to restart an existing thread.
If that's what you're saying.
even though in my _servr.run()
method, i have a while loopI don't see the connection. Are you saying that the while loop never terminates, and you don't see why the thread is terminating?
and if i call _server.run() explicitly in my code,
that while loop will be in executionIf you call server.run() explicitly, then run() will be executed in the same thread that you called it in.

What is the difference between exists and in

hi all
if i have these queries
1- select ename from emp where ename in ( select ename from emp where empno=10)
and
2- select ename from emp where exists ( select ename from emp where empno=10)
what is the difference between exists and in is that only when i use in i have to bring the field name or what.... i mean in a complex SQL queries is it will give the same answer
Thanks

You get two entirely different result sets that may be the same. Haah! What do I mean by that.
SQL> select table_name from user_tables;
TABLE_NAME
BAR
FOO
2 rows selected.
SQL> select table_name from user_tables where table_name in (select table_name from user_tables where table_name = 'FOO');
TABLE_NAME
FOO
1 row selected.
SQL> select table_name from user_tables where exists(select table_name from user_tables where table_name = 'FOO');
TABLE_NAME
BAR
FOO
2 rows selected.So, why is this? the WHERE EXISTS means 'if the next is true', much like where 1=1 being always true and 1=2 being always false. In this case, where exists could be TRUE or FALSE, depending on the subquery.
WHERE EXISTS can be useful for something like testing if we have data, without actually having to return columns.
So, if you want to see if an employee exists you might say
SELECT 1 FROM DUAL WHERE EXISTS( select * from emp where empid = 10);
If there is a row in emp for empid=10, then you get back 1 from dual;
This is what I call an 'optimistic' lookup because the WHERE EXISTS ends as soon as there is a hit. It does not care how many - only that at least one exists. It is optimistic because it will continue processing the table lookup until either it hits or reaches the end of the table - for a non-indexed query.

Difference between implicit and explicit enhancement points

Hi Folks,
I had learned many documents to findout the difference between explicit and implicit enhancement point.I got the theoritical knowledge on that but losing on the practical side..
Can anybody help me out with one real time scenario where the explicit enhancement points have been implemented and the step by step procedure to implement it..
Hoping for the positive response from you..
Regards,
Rohan.

Hi Rohan,
In implicit they are available at the beginning of subroutines defined in the standard reports.
Edit-> Enhancement operations->show implicit enhancement options.
This will highlight all the implicit enhancements in the report.
In Explicit enhancement we have two different types of enhancements -
Enhancement point and Enhancement section.
Enhancement point - SAP has some standard functionality defined for a report , but it may be required that you'll need to add your own code. In this case the code that you'll add will be executed along with the standard code.
Enhancement section - SAP has its standard functionality defines but it may not suit your requirement, in that case you may need to add your code and you'll need that code to be executed only. By this method the existing code is automatically commented and a copy of the same code is available to edit.
After executing the report only your code will be executed and the standard code will be bypassed.
For Practicle implementation, follow this link.
Link : [http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb54c452-0801-0010-0e84-a653307fc6fc]
i hope it will give you some clear picture....
Thanks.
Anurag

Difference between void and null?

wht is da difference between void and null w.r.t java?

corlettk wrote:
Why do you care, unless you're implementing a java compiler or JVM?Wow, you sure do suck at helping out in a forum. Why even make this post? You're not helping the OP any, and you made yourself look like a tool.
To the op:
Null is java's version of a null value. Java's version is more strict then many other languages, and will not work in a boolean expression or anywhere code expects a real and not null value. It's simply null.
Void is java's way of declaring no return type on a method. Methods that are void take no 'return' statement and if one is provided will cause a fatal error. The exception to this is using 'return' without a value, which returns control to the caller of the method.
Observe:
//this method returns an int
public int return_int(){
    int value = 5;
    return value;
//this method does not return an int
public void return_nothing(){
    int another_value = 123;
    System.out.println("Here's the value: " + return_int());
//this method does not return anything
public void nothing_returned(){
    return_nothing();
    return;
    System.out.println("This line never gets printed; the method returned control already!");
}

Difference between String and final String

Hi friends,
This is Ramana. Can u suggest me in this Question
What is the difference between String and final String? Means
String str="hai";
final String str="hai";
Regards,
Ramana.

*******REPEAT POST***********
We already answered your question why post in a different section?
http://forum.java.sun.com/thread.jspa?threadID=5201549

Why this difference between OTA and Ovi suite upda...

Similar Messages

Maybe you are looking for