Why this forum still exist? Rename to 'Windows 7'

This forum is irrelevant now.
There's an upcoming new Windows version, Windows 7.
Right now there's a Release Candidate for download. And even Creative, for the first time in years, is doing things well developing a Stable Beta driver for this OS.
Creative should create a new forum called 'Windows 7' on this board, or rename this 'Windows Vista' forum to 'Windows 7' to regroup all messages, problems and fixes regarding the Beta X-Fi Drivers and Windows 7. Even, other Creative Hardware like PMP or Webcam and the Windows 7 compatibility could be discussed here.
The goal should be have a complete final stable drivers for all X-Fi products, soundcards and other Hardware at Windows 7 official launch, like NVIDIA, ATI/AMD or other Hardware compaines.
Cheers.

Well Ekodaniel,
You are having problems after SP2, I am not. One of us is doing something right. You may have an issue with something else going on in your system, like
An Nvidia chipset motherboard, poor chipset drivers for your IDE/Sata controllers, old drivers on your system in general, or old bios, or new bios not setup properly for your card. If you find this hard to believe, how is it that I have no problems with my X-FI Titanium or X-Fi PCI Fatality and you do
If you have an extra hard dri've lying around, you could install Vista, Sp and then your sound hardware. Test everything, see if it functions. Then install SP2, reinstall your X-FI 2.0 Dan K. driver/applications pack and then see what happnens. I think if you rule out all software but operating system, service pack, and then drivers, you will be good to go.
This sounds like a lot of trouble but at least you will have your final answer and rule out any offending applications that you may have installed on your system, since your last format and install.
cheers,
jmacguire

Similar Messages

  • Why does this server still EXIST ON MY NETWORK!

    I've had these supposid servers on my network for like months now, I'm concerned people on my network can go through my computer. I turned off everything on the server app, and even deleted Mac Lion Server, and this is STILL HERE. How do I remove this from my network!
    Please HELP!

    Hi
    Apart from what's already been suggested:
    https://discussions.apple.com/thread/3190174?start=15&tstart=0
    I would pay attention to Gerrit de Witt's post. There are other threads in this forum that discuss this 'problem' which you can search for yourself.
    Apple's 'official' way is here:
    http://support.apple.com/kb/HT4827?locale=en_US
    But as threads in this forum have pointed out, it does not disable everything. I'm guessing it does work if you get the option to configure the Server at the Welcome Screen and bypass it at that point. However once you go beyond the Welcome Screen additional components are indeed downloaded which are not part of the Server app alone.
    I suppose the only 'sure' way (as Gerrit mentions) is to backup and reinstall. This may involve a reformat?
    HTH?
    Tony

  • After reading hours on this forum still having self-assigned IP address

    I just posted this below on another thread but it kinda is in the wrong subforum. This really is a networking problem:
    I have spent about 3-4 hours today already (a Sunday after all) reading just about every thread I could find that mentions this problem (airport choosing a self-assigned IP address and thus not sharing the internet from ethernet connection with the iPhone) on this forum and elsewhere.
    Power circuit interruption didn't work
    rebooting, resetting, etc all not working
    password deletion not working
    moving it up or down not working
    It worked fine now for months. My set up is a dsl router that connects the internet via ethernet to my iMac and then Airport is supposed to share it via Wifi so my iPhone can use it. As I said, that worked just fine for months now.
    Yesterday I upgraded to snow leopard and am now on 10.6.4. It worked still fine yesterday!
    Then I shut the system down.
    This morning reboot and it just won't work anymore.
    Any suggestion mentioned anywhere in this forum which a non-specialist like me understands does not work on my setup. I don't know where to go next or who to even ask for help!
    It's so frustrating I obviously need this to work.
    Because my iPhone has Daylite touch and needs the server setting to work to connect properly and sync. Daylite only syncs via wifi. That's my work!
    Anymore ideas out there?
    Message was edited by: BettinaH

    Hi,
    thanks for offering help! Really appreciated.
    I'm not quite sure how that should help? I'm always a bit with resetting things. What can it potentially mess up that is working now? What settings will be affected? There is a list but I'm not sure if there are any current changes.
    And in the list it doesn't seem to be directly linked to any networking info.
    I've tried a save reboot now but while this is apparently a good idea in any event, it didn't help solve my problem. Still getting a self-assigned IP.
    I wonder if getting a new router might solve the problem? Mine is somewhat old. The weird thing is though that it did work for a short while before it stopped doing so. So this can't really be then, can it?
    Oh this is so frustrating. I must get my network running again.

  • This forum will be renamed "Solaris 11 for Sysadmins"

    We won't remove the Solaris 11 Express discussions, we'll just start adding Solaris 11 discussions.
    Please try to specify whether your question applies to Solaris 11 Express or Solaris 11.
    Let me know if you have any questions.
    Rick
    http://www.oracle.com/technetwork/systems/index.html
    Edited by: rickramsey on Nov 2, 2011 10:19 AM

    We had a delay in implementing this change, but it is still our intention to shut this forum down in favor of the Java 3D forum on java.net. We hope to do this within the next two weeks or so.
    Please migrate to the java.net forum by following the above instructions before that time. Let me know if you have any questions.
    Kevin Rushforth
    Java 3D Team
    Sun Microsystems

  • This forum will be renamed Solaris 11 for Developers

    We won't remove the Solaris 11 Express discussions, we'll just start adding Solaris 11 discussions.
    Please try to specify whether your question applies to Solaris 11 Express or Solaris 11.
    Let me know if you have any questions.
    Rick
    http://www.oracle.com/technetwork/systems/index.html

    We had a delay in implementing this change, but it is still our intention to shut this forum down in favor of the Java 3D forum on java.net. We hope to do this within the next two weeks or so.
    Please migrate to the java.net forum by following the above instructions before that time. Let me know if you have any questions.
    Kevin Rushforth
    Java 3D Team
    Sun Microsystems

  • Portal session still exist in child window after logout main window

    Hello community,
    here's a short summary about our business scenario:
    We use performance management (SAP HCM) within our SAP ERP 6.0 and SAP NW Portal 7.0.
    With the application performance management we use some bsp- and webdynpro-iviews from the business package MSS.
    Some of these applications opens a second portal window (child windows) for doing the work.
    If the user logoff only the main portal windows with the "logout"-link and also close this window (e.g. he forgot to close the child windows) the user have the possibility to make changes (e.g. in the opened performance management document) in the child window.
    This behavior isn't allowed according our company principles. If the user logout on any portal window (also at creating of new portal sessions with STRG+N) all the sessions of the user should be terminated.
    Which possibilites do I have to solve this problem?
    Thanks for your help!
    Kind regards,
    Bernd

    Hello,
    yes, I found a solution.
    In the iView-parameter you can put in the following value:
    PortalSessionID = <ClientWindowID>
    This value ensures that in the opend window no changes are possible.
    In the opend child window there is now a pop up to log on to the ERP-system.
    Kind regards,
    Bernd

  • Updated: Rename this forum

    Hello all,
    Originally this forum was intended for ccBPM and Workflow. However I have noticed that 99% of posts are for workflow, and the occasional BPM post isn't answered. The confusion is because BPM is still in the title but I suspect hardly any BPM folks frequent this forum anymore. Or do they?
    So I have submitted a proposal in the suggestions forum and invite you to add your comments. If enough people agree then we can get the name changed to SAP Business Workflow. On the other hand if people prefer to see XI/PI/BPM questions in here then we can keep it as is. Or perhaps it should be Workflow and Guided Procedures or any other suggestions?
    The proposal is [over here|Rename "BPM and Workflow" forum to "SAP Business Workflow";, please add any comments there.
    Cheers,
    Mike
    Edited by: Mike Pokraka on Oct 1, 2008 4:13 PM

    Update:
    As most of you have probably already noticed, this forum has been renamed.
    Actually, that's not all that happened: a second forum was created as well, so I thought I'd drop a short note here to point out the [announcement|A new forum, and the difference between BPM, BPM and BPM] which also contains a little background on this whole BPM business.
    Happy Workflowing,
    Mike

  • Why is Flash CS4 so terrible in Windows 7 64 Bit?

    Hello,
    Well, I still have yet to see any posts or answers to posts that address the following problems with Flash CS4 on Windows 7 64 Bit:
    1. Flash takes half of forever to load.
    2. Flash is slow.
    3. Flash will not allow to Test Movies or Test Scenes. (This one is the most maddening and irritating.)
    4. Will not publish files due to an incorrect parameter. (Notice it doesn't say WHICH one.)
    Basic Specs:
    Windows 7 64 Bit OS
    8GB of RAM
    Intel i5 750
    I would really hate to have to revert to Windows XP just to use Flash CS4 reliably and I certainly am in no mood to purchase yet ANOTHER upgrade to CSx.
    Windows 7 has been out for around a year. Certainly someone at Adobe can illuminate why this program functions so poorly in Windows 7.
    Thank you.
    MGL

    Oh, and if by chance you, too, run Windows 64 Bit and Flash CS4, I would appreciate if you could share any thing you did to your system or installation to make it work better.
    Please don't just say, "Well, it works for me, blah blah blah."
    Thanks.

  • Why does backup still backup folders I've deselected?

    Trying the 'Let Me Choose' options in Windows Backup, I deselected 'Desktop' - yet Backup still backs it up.
    The other problem I've encountered is this message - "Backup skipped backing up X:\ as it is on the backup target." In my case, it's skipping a non-existent folder - long since deleted from both c: drive and e:drive.

    Hi,
    The error message told you that “Backup skipped backing up X:\ as it is on the backup target”, did you select the X drive when you backup? Or are there any files in your Libraries their location is in X drive? Open your Backup and Restore, click Change settings,
    choose the backup destination, click Next, check “Let me choose” – Next. Do not select the X drive. Please note that, in you Libraries, like Documents, Photos, Music, their locations should not in your external X drive.
    This error may occur when you include image backup in Windows Backup. And include the external drive in image backup. Please unselect the external driver from backup. What if you change another drive of your external HD to perform the backup?
    You may empty recycle bin.
    If this issue still exists, try to reset Windows backup:
    http://www.sevenforums.com/tutorials/632-backup-user-system-files-reset-default-configuration.html
    Please Note: Since the site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Hope it helps.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

  • Why does Siri still not work in Australia???

    It has almost been 6 month since apple released the 4s. I purchased it because I had never owned an apple product. Siri looked amazing in what it could do that's why I got it. To find out it wasn't working to its full extent in australia was very very diss appointing. As it has been so long since its release I really want to know why this is still not resolved??

    This is the iPhone 4S page on the Apple Australia website, Siri is plainly marked as BETA, which mans still in development. Perhaps you lot should stop playing with the Joeys and pay more attention.

  • Black lines in landscape content still exist in v.32.4.4 !!

    Hi
    Adobe should have been fixing this bug in 32.4.4, they did for the Adobe Content viewer.
    But this bug still exists in applications made by DPS App Builder ver 32.4.4.
    Adobe, please make hot fix URGENT
    Thanks
    Eli

    If you rebuild your app with the option "Enable auto hiding of the vertical folio scroll bar" checked this issue will not appear. Will that not work for your app?
    We do plan to release a fix for this on our next scheduled dot release, in approximately a week and a half.

  • Does the frequency selection tool still exist in audition?

    Does this tool still exist in audition? I am sure it was available in soundbooth
    Very useful if you are trying to remove a constant buzzing of a certain frequency from an audio file.

    Thanks for your answer!
    Disappointing that it's gone. Will definitely submit a feature request.
    The frequency selection tool was convenient, especially in the spectral view, because you could manually select one frequency across the entire file, while being zoomed in at only one specific time segment. You always risk forgetting/not catching something at the beginning or end of the file, when doing the manual selection tools, like the rectangle selection. Plus you'll have to be zoomed out all the way, so it's a bit harder to exactly select the frequency you need.
    The automated tools are useful, but in early 2015 I still value the human pattern recognition systems and artistic and aesthetic judgement over that of an AI. (We'll see for how much longer,...)

  • Why does this forum open in a window without the menu bar ?

    When coming to this forum trough the " Access the Java Studio Creator Community Forum" link on the "Java Studio Creator Forums" page, it opens a browser window without the menu bar. I understand that Sun thinks it's better for me not to have the menu bar, but I personally prefer to have it. What I prefer over everything else is to have the choice.
    By the way, one of the reason I prefer Sun products over Microsoft products is that I generally can choose what is better for me. Like to have or have not a menu bar, or to have my IDE in english rather that in french. (By the way, this last issue has been solved ;-))

    Use this direct URL, you can have the menu bar still --
    http://swforum.sun.com/jive/forum.jspa?forumID=123
    Thanks,
    Sakthi

  • Windows Live Mail ?   Links to this forum not working correctly.

    I got a new computer running Windows 7 and have been using Windows Live Mail.
    This is where I get my e-mails for updates to messages on this forum.
    The link for the message thread has a link that includes the # sign with the correct message to go to on the page.
    Now with Windows Live when I click the link it leaves the number after the # sign and just goes to the top of the thread instead to the exact comment.
    I can copy and paste the link into a browser and it works fine but if I just click it it does not work like it used to with Outlook Express.
    Any ideas if this might be fixable.
    Thanks:  GLenn

    I still have outlook express running on my OLD SLOW windows XP
    My new Windows 7 only has Windows Live Mail so I have to use it unless I get another program.
    I just thought that someone here might have figured it out.
    I dont know what the extra part after the # sign is called so i havent been luck searching google for an answer.
    Here is the link to your message:
    http://forums.adobe.com/message/2965072#2965072
    but when I click it it just puts this link in the browser:
    http://forums.adobe.com/message/2965072
    it does work but just takes me to the top of the thread.
    Im not sure why it doesnt use the part with the # and number that follows it.
    It does see it and if hover over it it sees the whole link.
    Just something new to figure out.
    I will try a Windows Live Forum too but if anyone knows any hints that would be great too.
    Thanks:  GLenn

  • Why the links are still opened in new windows?

    Why the links are still opened in new windows even I selected the option to open in tabs?
    This is one of the web I am reading (sorry that it is in simplified Chinese), I have no problems reading it in tabs in Firefox:
    http://www.sodu.com.cn/mulu_30498.html

    Hi,
    How are you trying to open the windows? Safari does not default to opening new windows in tabs. It can open +external application+ links (e.g. from your email program, RSS viewer, etc) in a new tab, but not links from an existing website.
    To open links in a new tab, you'll need to hold the ctrl key and click the link, or use the middle-mouse button if your mouse has one (or right-click on the link and choose to open it in a new tab).

Maybe you are looking for