Why time-dependent not work for cost center and profit center hierarchy

Has anybody been able to successfully turn on time-dependent for cost center hierarchy? Looks like the R/3 datasource 0COSTCENTER_0101_HIER is defaulted to be NOT time-dependent, and I dont know how to change the R/3 configuration to enable time-dependent for this datasource.
Here is what I found. If you go to RSA2 in R/3 and enter datasource 0COSTCENTER_0101_HIER, and then select "Hierarchy Info", you will see that all the time-dependent properties are unchecked by default. By comparison, Cons Unit datasource 0CS_UNIT_CSCU_HIER has Version Dependent Hierarchy as selected, and we are able to load Cons Unit hierarchy as time-dependent, but have no luck so far with the Cost Center hierarchy.
Can any BI guru tell me how I can make time-dependent work for the cost center hierarchy?
Thanks a bunch!

Check SETLEAF and SETNODE.
Basically CO Master data groups dont have seperate tables. They will be available in above tables. Choose proper Set class to filter the results

Similar Messages

Why is Cfgrid not working for me

I am using CFMX7
Why is this not working for me?
This is Gridtest1.cfm
<cfoutput>
<CFFORM align="center" ACTION="gridtest2.cfm"
METHOD="POST"
name="getstuff" >
<cfinput type="HIDDEN" name="ID" value="#form.id#" >
<cfinput type="HIDDEN" name="customerno"
value="#form.customerno#"
>
<cfgrid name="Mygrid" width="960" query="getpermits"
gridlines =
"yes" rowheaders="yes"
selectmode = "edit" height="350" >
<cfgridcolumn name="id" bgcolor="##FFFFFF" header="ID"
display="yes" WIDTH="40" select="no">
<cfgridcolumn name="permitno" bgcolor="##FFFFFF"
header="Permit
No" display="yes" width="70" select="yes">
<cfgridcolumn name="sortorder" bgcolor="##FFFFFF"
header="SortOrder" display="yes" WIDTH="62" select="yes">
</cfgrid>
<div align="center">
<cfINPUT TYPE="submit" VALUE="Save My Changes"
NAME="savemychanges"
>
</div>
</cfform>
</cfoutput>
This is GridTest2.cfm
Form fields:
<cfoutput>[#form.fieldnames#]</cfoutput>
Form values:
<cfloop list="#form.fieldnames#"
index="idx"><cfoutput>#idx# =
#Evaluate(idx)#</cfoutput>
</cfloop>
<cfif isdefined ("form.savemychanges")>
<cfgridupdate grid="mygrid" datasource = "divwt"
tablename =
"tankerpermits" keyonly="yes" >
</cfif>
<cfoutput>
form.#__CFGRID__GETSTUFF__MYGRID#.original.#permitno#
</cfoutput>
Output from TestGrid2.cfm reflects a �funny
looking� grid name and I
can see in the output that Permitno is definitely a defined
field.
Form fields:
[ID,CUSTOMERNO,SAVEMYCHANGES,__CFGRID__GETSTUFF__MYGRID]
Form values:
ID = 13
CUSTOMERNO = 21691
SAVEMYCHANGES = Save My Changes
__CFGRID__GETSTUFF__MYGRID = __CFGRID__EDIT__=3 id N Permitno
Y
sortorder Y 1 U 571 z
Element __CFGRID__GETSTUFF__MYGRID.ORIGINAL.PERMITNO is
undefined in
FORM.
The error occurred in
C:\cmudintranet\Purple\divwt\bftankertruck\gridtest2.cfm:
line 147
#form.__CFGRID__GETSTUFF__MYGRID.original.permitno#
Thanks in Advance

Lorna, be careful. This could cause your comments
to stop working. Blog comments are
sensitive..................
.......... Lorna says ................................................
Allyson, your precaution comes on the heels of me realizing that if I put a song on a blog summary page, then I will have to edit the .js file every time I add a blog entry.
Whereas MassReplaceIt could solve the problem there, the added issue of problems with comments is enough to make me stay away, so that is what I will do: No music within 250' of the blog guy.
Lorna in Southern California

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

A reply to similar question (Q & As , in product page Apple Store) says:
"...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it." Answered by Enrique T from Lima Oct 25 2013.
If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
Hopefully this helps.
Good luck & happy computing!

Cost Center, Work Center and Profit Center

Hi ALL,
Can any one please explain me the concept of Cost Center, Work Center and Profit Center.
And where and when do I assign the cost center???
Amit

Hi Check the following "
Cost centers represent areas of responsibility where costs are incurred or where responsibility for costs may be assigned. They represent the smallest unit of responsibility within the organizational structure of an enterprise.
A cost center can be pictured as a cost bucket such as a department, product line, production stage or geographical area.
An unlimited number of cost centers may be created.
All cost centers within on controlling area have to be assigned to a cost center hierarchy (standard hierarchy).
Costs originally posted to one cost center may be distributed and assessed to one or more other cost centers using allocations.
How are costs assigned/posted to a cost center?
External financial accounting documents created in FI, AM or MM that post to a G/L expense account can be configured to require a cost center assignment be entered at the time of transaction entry. The system automatically creates a parallel CO document that posts to the indicated cost center.
Cost elements master records can be configured to be posted to a certain cost center (automatic account assignment).
In addition, other non-financial activity (i.e., direct labor hours) may be posted directly to cost centers from within CO or via other modules such as PP or HR
chandra

Cost Center and Profit Center Planning

Hi,
I have one Co issue. Pls Suggest me the wiseful solution.
Cost Center and Profit Center Planning.
For F-2008 Planning data they have updated in the month of Aug, 07 for Profit and Loss Items and they have revised the plan data of some cost elements in the month of oct, 2007 (say 5% Increas). when comparing the cost center report to profit center report, both are not matching. the reason when i see and reconcile the document nos and values in between cost center and profit center reports i found out that there are some documents are missing in the profit center report.
wherever plan data had revised e.g for cost element Salaries they have updated 100000 Planning cost in the month of Aug, 07. In the month of Oct, 07 increased 5% i.e.5000. In cost center line items details i found 2 documents for Rs.100000/- and Rs.5000/- But in Profit Center Line Items i am getting only Rs.5000/- Value Document.
Note. As and when KP06 Plan data has been updated Profit Center line items are generating. It is not necessary to run any programme inorder to transfer Plan Data from cost center to profit center.
Observations From My Side:-
I tried to run the transaction code 1ke0. i have selected the cost object is Cost Center, version and had given Cost Center Parameter in development and quality clients and executed the same.By this time already existing data either deleting/ riversing and creating new documents fully except manually changed data in profit center through 7ke1.
My Question is
1.Upto what extent it will work.
2.will it be possible to transfer data from cost center to profit center only missing documents which are available in cost center, without disturbing of existing data in profit center.
3.suppose if i done this activity, there are some data which was already transferred from other cost objects like internatl orders & wbs elements to Profit Center. will the data get disturbed (deleted/riversed).
Pls suggest me the wiseful way to solve the

Hi
Try This
BAPI_COSTCENTER_CREATEMULTIPLE
BAPI_COSTCENTERGROUP_CREATE
BAPI_PROFITCENTER_CREATE
BAPI_PROFITCENTERGRP_CREATE.
Regards,
V.balaji
Reward if usefull

Cost Center and Profit Center in NewGL

Dear all,
We defined new customer fileld in the NewGL for spliting the document number. Everything works fine! We have only one problem.
Afer posting a new document we see the cost center and Profit center in the classic GL. When we change to NewGL is this fields empty. Is there any customizing to do here?
Thank you!

Thank you very much for the information. I allready had inserts this fields. Problem here is
we have a new customer field in NewGL ZZPMS. This field is not availible in table FAGL_FIELD_MOVE. Therefore I get a dump in RGIMOVV0.
Now my question: This customizing is only to assign a costomer field ZZPMS to a profit center or a cost center, ect. . This mean, I will get in the NewGL the value of my ZZPMS in the profit center and cost center incase of the original values. Is this right?
Thank you

Cost center and profit center details

Hi All
Is there any function module or BAPI to obtain cost center and profit center details
for a GL account. Actually I am obtaining the carry forward balance for a
fiscal year from the table GLT0 but I am not getting the corresponding profit center
and cost center details.
Please suggest a way forward!
Regards
Ankit

Hi,
If you are getting data from GLT0 table, using the Account number go to SKA1/SKB1 tables and get the CostCenter(KOSTL) and Profit Center(PRCTR). If you want to get details about CostCenter, its master table is CSKS and master table for Profit Center is CEPC. you can get required info from these tables.
thanks,
sksingh

Difference between Cost center and profit center

I need to know what the difference is between a cost center and a profit center eg. A work center has both a cost center and a profit center. What do they collect for that particular work center.
Thanks

hi tefo
differenc is whatever the cost involved will be collected both to the cost center and profit center, when we settle the order it will be settled in the cost element for cost center. the cost will be reflected in profit center which is assinged to the particular cost center.in profit center you can cpature revenue also which is used to map the profit loss for the concern, where as cost center will only capture the expenses
regards
thyagarajan

Change the Accounting document fields cost center and profit center

Dear Experts,
User has posted document with wrong profit center
For that we subjected that he can go to the profit center actual posting T.Code 9ke0 but with that he can only change the Profit center document with that there is no accounting side updating
I have tried with Document Change Rules, Line Item for fields cost center and profit center in that while configuring I did not get any error message,
But in the document I am unable to changing the same fields cost center and profit center
Can any body please guide me to resolve the issue?
Essentially I want to change the Accounting document fields cost center and profit center
Thanks in Advance,
Wiswanath

Hello,
Once the documents are posted in FI module, the system doesn't allow anybody to change the cost objects (cost center, profit center, internal order). The only fields you can change through FB02 transaction are the Line item text (BSEG-SGTXT) and the assignment (BSEG-ZUONR).
If you want to get a change to the cost object to be reflected from FI to CO, you should reverse the FI documents with wrong cost objects and post new documents with correct cost center, profit center.
Hope it helps you.
Cheers,
Daniel.

Cost center and profit center linked to GL account

Hi All
I am obtaining the carry forward balance for the fiscal year from the table
GLT0 but I also need the cost center and profit center details for the GL account,
which I am unable to get from either GLT0 or GLTPC or GLT1 tables.
Is there any other way out. Please suggest!
Regards
Ankit

Hi,
Hope OKB9-Account Assignment will resolve this issue.
There you have the assignments.
Regards
A
Assign points if useful

Transporting Master data - New GLs,Cost Center and profit Center.

Dear Friends,
1. I have to create new GLs in Dev, Now i have to transport the new GL to Quality and Production. As per my knowledge, Master data has to created in DEV,Quality and Production.
please suggest, is there any t.code where i can transport GL from Dev to quality and production.
2. when Creation of the site, New Cost center,Profit center, Changes to standard hierarchy both in cost center and profit center hierarchy has to done in dev,quality and production manually.
Any suggestions where i can do only in dev and transport to quality and production.
3. After creating new cost center and profit center, i have to go to okb9, select the co.code,cost element and insert the new cost center and profit center in every cost element. This takes almost one hour.
Please suggest how to reduce this manually process.
All the help will be greatly appreciated.
Regards
Sridhar Reddy

Hi ,
Master data is to be created in diffrent clients as it is a non transportable object .
So in case of GL , cost centers you will have to again re run the LSMW which you had created for DEV .
Secondly OKB9 is a transportable object , so i dont feel there should be an issue in adding it to a transportable object .
In case of adding the values of tables in a request what you can do is create a request , go to SE01 open the request in change mode in the objects enter TABU and enter on the relevant entries that you want to transport .
But again one has to be very clear on what all table entries are to be transported , like SKA1 , SKB1 , SKAT etc. looking at the complexities and moving ahead with the standard way it is advisable to re run the LSMW in QUA and PRD .
Hope this helps .
Regards ,
Dewang T.

Responsible Cost Center and Profit Center in a Maintenance Order

Dears,
I would like to know what's the real influence that responsible cost center and profit center located in the
"add. data" tab in maintenance order has when I confirm a labor (through the IW41) and settlement an maintenance order.
Best Regards,
D. Quint.

D Quintal,
When you perform a confirmation (IW41) the cost centre assigned to the work centre is credited, and the order debited.
This work centre cost centre may be the same cost centre as the responsible cost centre in the order...
PeteA

Changing cost center and profit center in already exsisting PR and PO

Hi friends,
In my ckient place we have created PR with account assignments- K,C,D,A and saved the pr. We are creating PO woth respect PR. then we did goods reciept also and some went upto to the stage of invoice verification. now my client likes to change the cost center and profit center they are using currently. they are interested to create new profit center and cost center.will this chnage will affect the already exsisting open PO(purchasing process not yet completed).
Is it possible to change the cost center and profit center in already exsisting and created PO and purchase request. will sap allow this.what can we do.please advice.
Thanks you in advance.
Regards,
willaim

William,
Once you will post the GR or Invoice system will not allow to change the account assignment data like Cost Center or profit center.
This is a standard SAP functionality

Profit center and profit center group wise profit and loss account

Hi
My name is swetha i have one doubt in ecc 6 version. i need profit & loss account profit center and profit center group wise is it available in sap ecc 6 . Could u please details such kind of informatiion how we will get the p&l report in sap profit center group and profit center with transaction code.
Regards
Swetha

Hi
Please use report
S_ALR_87009712 - Profit Center List: Plan/Actual
Here you can enter the Profit Center Group for which you need the P&L .
Also create a account group which should include all your PL accounts and use the same in the selection of the report.
There are other reports you can try on the same concept.
S_ALR_87009712 - Profit Center List: Plan/Actual
S_ALR_87009726 - Profit Center Group: Plan/Actual/Variance by Origin
S_ALR_87009734 - Profit Center Group: Plan/Plan/Variance
S_ALR_87009717 - Profit Center Group: Quarterly Comparison of Actual Data
Thanks

BAPI To Update Profit Center And Profit center group

HI All,
We have requirement scenario in which MDM Will Syndicate the PC and PCG And We have to update the PC and PCG in R3.
Do we have a Standard BAPI For Profit center and Profit Center Group Update?
Thanks In Advance!!!!!
Moderator message : Search for available information, duplicate post locked. Continue with original thread.
Edited by: Vinod Kumar on Oct 17, 2011 1:59 PM

Hi
Try This BAPI...
BAPI_PROFITCENTER_CHANGE
Regards
Ajit

Why time-dependent not work for cost center and profit center hierarchy

Similar Messages

Maybe you are looking for