Why touchscreen not functioning when power cable is attached

Hi
I am using Iphone5 running iOS6.1 (updated yesterday). The touchscreen does not function whenever I'm charging the phone using original cable and original powerplug. I have done hard reset but to no avail. I have upgraded to latest OS, also same problem. What can I do?
KS

If it works with other chargers or computer USB ports, then the original charger is defective.  It is covered by the phone's warrantee.

Similar Messages

  • IPhone 5S sounds do not function when on Bluetooth or when plugged in

    iPhone 5S 32GB version 8.1.3
    sounds do not function when on Bluetooth or when plugged in

    8.1.x to 8.1.3
    I will try tonight and see.

  • I have a folder with 10 folders inside it, 8 of the folders will not function when I use "show view options".

    I have a Folder with 10 Folders inside it, 8 of the Folders will not function when I use "show view options", they always default back the default.  The "show view options" works on all my other Folders in my system, even on the first two of the Folder in question.  How can I correct it?  I have tried every thing I can think of, even deleting the Folders & reintalling them.  For some strange reason the "show view options" only does not work on the last 8 Folders in the Folder in question.

    Instead GarageBand recognize my keyboard and i can play normally, also, if it can help, those are the Audio and Midi Logic Preferences and the Controller Surfaces Setup with the keyboard connected :

  • HT201401 iphone 4s     not charging when power ON

    iphone 4s     not charging when power ON

    Amish/ Selvars4, i have exactly the same issue. I'm sure its software issue as mine has done it also just last week. i had it happen previously about 3 months ago also. the phone would only charge via a USB from a pc or if the phone was turned off.The way i got it working last time i kept reloading previous version of the phone back up and finally it worked normally again. It was always visible to iTunes so not an issue. Last week though i have had exactly the same problem as Selvars and itunes cannot see it now, and not charge by any device except when turned off. I did a backup and iTunes sync about 2 days before this problem started. (now thinking back it was the same when i had the previous issues with charging) this time its invisible to iTunes, pc,won't charge anywhere except turned off. i left it plugged into pc where it wasn't visible and then about 40mins later it recognised it. so i did a factory restore and update then reloaded a back up. it now is visible to pc and charges from pc and power adaptor but won't charge from a dock. Strange and Frustrating. Suvzero

  • IMac 2010 randomly shutting down, only reboots when power cable is unplugged and replugged

    Specs
    It's a stock 21.5inch iMac mid-2010, with the addition of some extra RAM - two more 4gb sticks bringing it up to a total 12gb - that I've had installed for roughly 6 months with no problems.
    No problems with my Mac since we bought it from the Apple Store until the last couple of days when this started happening. I don't have AppleCare and obviously I'm out of warranty.
    Problem
    Seemingly random shut downs. I've tried to work out if it's to do with overheating, but I've been playing some graphically intensive games today and that hasn't killed it. The strangest thing is that most of the shut downs are when it's not even in use - the next time I sit down to use it it has been turned off.
    I don't think this is a software problem as it's been happening on the OSX and Windows partitions.
    Nothing happens when I press the power button until I unplug the power cable, wait a few seconds, plug it back in again then press the power button. This makes me wonder if it's a problem with the power cable? Any tests I could run?
    Any ideas? Tests I can run? Or is it a lost cause?
    Thanks in advance!

    After further testing, it seems to only be powering back on if I leave it unplugged for about 20 seconds. Is this something to do with resetting the SMC?

  • Satellite C660-115 WLan connection only works when power cable is connected

    Hello,
    I bought a satelite C660-115 a few weeks ago. I would like to surf the internet anywhere in my home without any wires/cables.
    From the first day I had this problem: when I disconnect the _power_ cable, the wireless connection will stop working.
    The webpage on my screen will still be there, but loading a new page is a problem.
    Sometimes it helps to reload (pressing F5), sometimes not. It always helps to "repair the ip-adress", but not for long.
    The only solution is to atach the power cable, regardless of how much power the battery still has.
    When I do so,there is no problem whith the connection at all.
    I went back to the shop where I bought it, they connected to their own wireless network and they had the same problem after a few minutes. In the shop too attaching the power cable solved the problem.
    So the problem must be in my lap top, not in my network (modem or so).
    Does this all sound familliar and if so, how can I fix it?
    I hope my English is understandable, I live in Holland.
    Thanx in advance!

    Here the solution:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59177
    Change the Power Save options for Wlan in Win 7 power managment

  • "Wireless Radio is not Functioning" when Diagnostic Tool is run

    I recently unplugged my HP Photosmart Premium C309a and relocated it to a new shelf beside my main computer.  Wireless networking worked just fine before the move, and now it won't detect any networks to connect to.  I've run the Wireless Network Test Report and it says "Wireless Radio is not functioning.  Contact HP support."  Is there anything I can do from here to help fix this problem, or do I have to pay for Repair Service somewhere?  I would like to believe that this HP product can withstand more than a simple move from one shelf to another....
    Any suggestions would be greatly appreciated!
    *Note* I know for sure my network is working properly (since I'm connected to it right now...).  My computer detects my network as well as a number of others in the neighborhood.
    This question was solved.
    View Solution.

    Is the printer still under warranty?  If not, yes you can have it repaired, but it may cost nearly what a new printer costs.  Here is how to contact HP.
    Your printer should be able to work with USB and it should also be able to be connected to your router with an Ethernet cable.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • [845 Series] 845E MAx2: CPU cooler and power supply stop when power cable plugged in to HDD

    Board: MSI 845E Max2
    BIOS: 6398E V.1
    UPDATED BIOS: 6398IMS V.5.7 040203
    CPU: Intel Celeron 1,7GHz
    RAM: 512GB Infineon
    Power: ATX 300W
    Hard Disks: WD and Maxtor 10GB-30GB
    Hi all,
    whenever I plug in the power cable to the hard disk computer shuts down after 2-5 seconds. If I try to start it again nothing happens. So I need to plug off and on the ATX-connector again so that the power supply works and the CPU-fan spins. However, as long as a hard drive is attached (it does not even need to be connected to any of the IDE-controller; having connected to the power supply is sufficient) it shuts down.
    Following tests were done:
    1- other hard disks were used
    2- other power supply resources were used
    3- computer was started with short connecting the power switch through the respective pins
    Still the same result. If no hard disk is plugged in, system starts fine.
    So I flashed the bios to A6398ims.570 without connecting the hard disks (since no hard disk drives were available the win98 start diskette created a c drive in the physical memory - afaiu - and I flashed the bios via this generated c drive). But nothing is changed!
    Does anyone have an idea?

    Hi again,
    after reading the PSU guide I used a HDD which was 20GB (an older one of app. 4 years) and system booted normally. It seems that the PSU of 300W was having a difficulty of serving the relative newer HDD with power. I will test it with a min. 400W PSU and let you know if the problem is completely solved.
    Thanks for your helpful comments.

  • HELP!! my computer shuts down at random ONLY when power supply is attached

    I still have the factory power supply. My problem just happens when ever it feels like it. I could be watching something on Quicktime or have Adium running. I have had it happen to me regardless if it was being used a little or a lot. But It ONLY happens when my power supply is attached. If I plug in my power supply to charge my computer it will shut off. I have read some other posts pointing to the problem being the logic board and that a few of the iBook G4's are subject. If this is a common problem with this computer model I think Apple should recall them and fix the problem. Any insight will be great.

    Alright everyone it has been a week since I replaced my DC board and no problems. But we all know how Murphy's law works BUT I'm calling this one fixed. Thanks for your suggestions and help

  • Dialog Box does not function when called a second time

    I have created a dialog box that only seems to work once in a larger application. The box is designed to be a MatLab code debugger. My idea was to allow a user to interactively create/debug Matlab code from LabView using ActiveX automation. Anyway, I have created a test vi that uses this dialog box twice. The first time it is called it functions as expected, but the second time nothing on the front panel (of the dialog box) responds and I cannot close the window or interrupt the vi. I am using LabVIEW 7.0 on Windows 98. Please see the attached vi's. MatlabDebugger.vi is the dialog that's causing the problem. Matlabx2.vi is the sub vi that handles the ActiveX automation. Debuggertest.vi is the test v
    i in which the dialog will not word a second time.
    Thanks in advance for any help or suggestions.
    Attachments:
    Debuggertest.vi ‏51 KB
    MatlabDebugger.vi ‏303 KB
    Matlabx2.vi ‏361 KB

    The problem is caused by the nested event structures; you have an event structure inside an event structure, acting on the same controls. When the main one reacts to the cancel the other one get's stuck...so on the next call the main event structure just halts due to the stuck event structure inside it. It's not obvious why this is a fault, you may be able to spot it now that you're on the track though.
    MTO

  • Battery status showing "not charging" when power adapter is plugged in

    I just bought a brand new Magsafe adapter 60w for my macbook but it seems that when i plugged in to my macbook, the battery status showed "not charging".  I have to disconnect and plug in again.  This also happened when I used my previous power adapter, that is why I got a new one.  Is this a common problem?  Please advise what could be done.

    Hi
    Try resetting the SMC. This sometimes solves this type of problem, in fact, it's listed as one of the reasons why you should try this:
    http://support.apple.com/kb/ht3964
    Bob

  • File Adapter Issue: Not functioning when used with BIC user modules

    Hi! ALL
    We have been experiencing issue with file adapter, when we SeeBurger BIC user modules in sender file - FTP communication channel.
    The regular FTP functionality is working fine if do not have BIC user modules defined under the module tab.However, when put in BIC user module parameters it is not picking up the file.
    Also, we do not see any error logs; even the communication channel monitoring does not show any error log....only show the polling interval success, without the file being picked up.
    This issue started appearing once we deployed our new sda file....as we changed our BIC mapping.
    We can try doing back to our previous sda file....to see it fixes the problem.
    But, before doing that ....we would like to know where the cause of this issue....Can you point us to any error logs we can find on the PI server.
    Your help is greatly appreciated!!
    Thank you,
    Patrick.

    If you configured your logging correctly you should find in the log folders
    ./applications/com.seeburger.jucon/
    ./applications/com.seeburger.bicxiadapter/
    Try to scan those for recent errors - if the no log files can be found you should check the defaultTrace.

  • Logoff/shut down/restart window does not appear when power button pressed

    For a couple months now my G4 Powerbook running 10.4.6 has not responded to pressing the power button. This also applies to the restart/logoff/shut down options from the Apple menu -- no response.
    I reloaded Tiger using the save personal preferences and settings and the malfunction is still there.
    Ideas? (I haven't called AppleCare yet.)
    TIA

    Assuming that you mean you did everything that Sherry
    and I offered up in our responses, then create
    another admin account, log into it, and see if the
    problem persists. Cryptic one-line responses aren't
    very helpful. If this suggestion doesn't make the
    problem disappear, then install the latest COMBO
    update (10.4.7 was released today), restart, launch
    Disk Utility, repair permissions, restart, and
    hopefully that'll fix things.
    I have another - "clean" - admin account and the problem persists there. And I downloaded the 10.4.7 update and the problem persists. If there isn't much to add, why go beyond, as you call it, a "cryptic one-line" response.
    Ended up calling AppleCare and will do a clean archive and re-install. Thanks for the suggestions.

  • VPN connects but does not function when resuming from sleep

    THe VPN on my ibook works fine - it connects and the data goes through. but when i put it to sleep (lid close/power->sleep) and than wake it up VPN connects fine and that's all. data stucks. i disconnect it - all works, pings go and so on. i connect it again, it connects, and pings stop, tracerouting stops and that's it. any ideas?

    Whatever you are connected to thinks you are disconnected by the sound of it, or it is confused about the current session and is not allowing traffic. Something in the "sign off" settings on the other may be misconfigured.
    You might want to post what you are connecting to (business network, etc). PPTP? L2TP?

  • Do you have an issue with the touchscreen not working when cold?

    I just got an iPhone 5 64GB White and noticed that when I ran with it outside today, in about 50 degree weather, the phone's touchscreen stopped responding. Basically I couldn't swipe to unlock. I also noticed when I put the phone on my kitchen granite countertop which is pretty cool, the phone does not recognize my touch on the screen. Was wondering if anyone else is having this issue.

    I noticed a problem with the touchscreen at cooler temperatures as well - even at about 60 degrees, it stopped responding to touch in part or all of the screen.  It took a while to figure out, but your post helped me - thank you.
    I took the phone in to the Genius bar, was able to reproduce the problem (I'd let the phone sit near my car's air conditioner on the way there - heh), and they replaced it without argument.  The new phone does not have the same problem.
    This is the first Apple device I've had to replace for a defect, and I'm impressed.  I hadn't purchased any of their Apple care or any insurance but it was free and took all of 15 minutes.

Maybe you are looking for