Why transport layer has package defined for it?

I double click a transport layer on txn STMS. The popup is a "package overview", some entries show up here:
YWM                            ZTRL      Warehouse Management Repositor
YBW                            ZTRL     BI Development Package
YCRM                           ZTRL      CRM Development Class
Could you help explain:
1) how was them defined?
2) what's the  purpose to do so?
I have verified that the number of the  package is the same as the number of the DEV clients created after installation.
So are there any relation between them?
Thanks!

Hi,
Whenever your create some program then you have to assign a package to it like a container.
For more information, check below link:
http://help.sap.com/saphelp_sm32/helpdata/EN/57/38de194eb711d182bf0000e829fbfe/content.htm
Thanks
Sunny

Similar Messages

  • No Project IMG has been defined for Starting Reference IMG  SOLMAN ERROR

    Hi All,
                 I created a off release project in prodcution and assigned logical compenents. When I am trying to create a IMG object for SPRO it is showing an error stating that "No Project IMG has been defined for Starting Reference IMG ". when I click Ok button it is showing another message ""Screen output without connection to user.". I Verified in project administration(solar_project_admin)> System Landscape>IMG projects, status for distributing IMG projects to component systems is showing in Red color. No IMG projects have been distributed into the system.
              RFC connections are showing are correctly. I am not able to find the problem and solution. Could any one help me to figureout the problem and what needs to be done
    Thanks in advance,
    Sreekala Rapuru.

    Is it mandatory that i need to create a project view?
    I have created a view "activity necessity", but not have selected any of the check boxes in "mandatory/optional/nonrequired". As well i havent generated it. I can do the "configure" now without errors
    my question is - is there anything critical which is related to this views? I went through the help page you sent me.. Is this for creating the implementation guide?  any guidelines you can send me about this is highly appreciated.
    thanks!

  • No Project IMG has been defined for "logical compt". Starting Reference IMG

    Hi,
    I have my logical component setup, and have my DEV system added. I have the BPH setup, and is trying to do configuration. when i select an IMG and click on "configure" i am getting the following error, but it takes me to the IMG
    Error:
    "No Project IMG has been defined for Z_LOGIC_COMPT. Starting Reference IMG"
    I went and checked in solar_project_admin, system landscape/project/IMG. Selected the development system from the "system role for IMG projects". I can see it in RED. How can i generate this? I guess its because of this, am getting the error above
    Thanks!

    Is it mandatory that i need to create a project view?
    I have created a view "activity necessity", but not have selected any of the check boxes in "mandatory/optional/nonrequired". As well i havent generated it. I can do the "configure" now without errors
    my question is - is there anything critical which is related to this views? I went through the help page you sent me.. Is this for creating the implementation guide?  any guidelines you can send me about this is highly appreciated.
    thanks!

  • APP-PO-14258 no rate has been defined for this date

    Hi,
    When we are trying to receipt an error is appearing
    APP-PO-14258 no rate has been defined for this date
    Cause The rate type that you have entered uses pre-defined rates. No rate has been defined for the currnet rate type and rate date combination.
    Action: Enter a rate date for which a rate has been defined
    Please assist me.

    Are you using foriegn currency?
    If yes, You have to define exchange rate for that date.

  • No quality notification type has been defined for inspection type 89

    Hi
    When I am creating a manual inspection lot and want to create a quality notification it gives me this error "No quality notification type has been defined for inspection type 89" where do I assign the notifications to the inspection lot.???
    I want to know where do I configure it??
    Regards
    Suresh

    Hi
    Path for assigning the Qualtiy notification type to Qualtiy  inspection type:
    SPRO--> Qualtiy Mangement --> Qualtiy inspection --> Inspection lot creation -->
    Maintain Inspection types.
    Select the inspection type and goto details screen
    You can find notification type field in the details.Give the value and Save.
    Regards
    Ramakrishna

  • Output type config error:No communication data has been defined for transmi

    Hi Gurus,
    i have copied an existing output type ZOCT to ZORD . when i change the sales order the output is automatically triggered but is not processed successfully instead it is in red. when i see the processing log i could see the error below.
      green Object 0000000133                                        
      green Output type: UK Sales Order                              
      green  Processing log for program RSNASTED routine ALE_PROCESSING
       RED   No partner profiles (message control) maintained         
    I tried adding communication data in VV11 but i get the below error.
    No communication data has been defined for transmission medium A
    Message no. VK603.
    I am using ordrsp and orders05 in partner profiles and in message control tab i am giving
    V1 ZORD SD10 values.
    Please suggest me to correct these errors. Your help is much appreciated.Thanks.
    Regards.
    Sanjeev

    Hi V V Reddy,
    Thanks a lot for your inputs. I have debugged the program rsnasted at routines and in EDP12 there were repeated entries .
    So i deleted all the partner profiles and created and generated them agian.
    I have also missed to maintain SP partner function in output type partner functions. I do not see any errors now.
    Thank you very much.
    Regards,
    Sanjeev

  • HT201210 Why iphone 3g has no support for ios 5 + ..please allow us to download..

    Why iphone 3g has no support for ios 5 + ..please allow us to download..
    Please do anyhow. .anything ...you are the creater of apple.. I know you can do it. .please do anything that iphone 3g will support ios 5 ro greater than that..

    The 3G was discontinued over 2yrs ago.
    The 3GS was only discontinued about a month ago.
    Apple made the decision that the 3G would not get anything newer than 4.2.1 because of reasons only they know.
    Griping about it is pointless.
    Speculating about why is against the terms of use of these forums.
    The device is ancient... either accept that it will never get an update and live with it or buy something newer.

  • Why iphone 3gs has no update for IOS 7

    Why iphone 3gs has no update for IOS 7

    Sriram5400 wrote:
    The thing is now 3GS is left out when the next version say its iPhone 6 , 6S, 6C ..., then iPhone 4 will face the same sitution which 3GS are facing now and it goes on . Phones are not just for 2yrs 3 yrs if that is the case i would have got Samsung , Sony etc . Why do i prefer Iphone ?
    Samsung, Sony and every other company are constantly coming out with new models and dropping older models.  Many older Android phones also cannot be updated to newer OS versions, as their manufacturers don't release firmware updates for them.  Apple is not unique in that aspect of the business - they are all competing with eachother.
    Despite many people's wishes that companies were ultra-altruistic, they are not (and largely because their share holders do not want them to be).  They make products to sell them and make profits, and whatever is necessary to do that in an ultra-competitive market is what will be done.  The pace of change is not going to slow down, if anything, it is just going to continue to ramp up.  And millions of happy share holders, and tens of millions of iPhone customers are constantly demanding more new things, not stable older things.
    That said, the iPhone 5c and Apple's move into the trade in program, are attempts to offer better options to people on a tighter budget than others.
    But, as with any personal item, you buy what you can afford.  Nobody is entitled to the best and the greatest just because others have it.

  • Updating Transport Layer in Packages

    Hi all, I have a question on Transport Layers and that set in Packages.
    The situation is a system that has been copied and renamed in 4.6 (System was copied from a combined install to a new install with all the customisations kept to provide a separated system with the same functionality) and then upgraded to ECC6.  Now the existing customer packages are still assigned to the old Transport layers and thus if any changes are made the system insists on a Local Change Request.  I know I can individually change each package to the new Transport Layer this then wants a Local Change Request to do this which can then be modified to the right Transport layer, and the package now allows the correct Transport Layer to be used when doing further modifications.
    My question is basically Is there a SAP program that will enmass change old Transport Layer assignment to a new valid Transport Layer?
    Was there a step missed in the original 4.6 conversion, and can that step be executed now the system has been upgraded to ECC 6?
    An example of the entries in the table TDEVC: (sorry for the horrible format)
                            OLD     .    NEW
    DEVCLASS     ZCCO    . ZCO-MAIN
    INTSYS            (blank)  . (blank)
    CONSYS          (blank)  . (blank)
    CTEXT              (blank)  . (blank)
    KORRFLAG           X     .    X
    AS4USER       USER     .  USER
    PDEVCLASS   ZCSD     .  ZFED
    DLVUNIT          HOME   .  HOME
    COMPONENT   (blank)  . (blank)
    NAMESPACE /0CUST/  . /0CUST/
    Where the layer ZCSD is no longer valid and ZFED is a new Layer that is functioning correctly for cross system transporting.

    Hi Jason,
    I am not sure if there is a program after system copy to change, from old transport layers to new transport layers.
    Have you already run BDLS after the system copy. It helps you in change the logical system name and client number as required.
    Also the following link provides some insite to your query:
    http://help.sap.com/saphelp_nw04/helpdata/en/3d/ad5bcf4ebc11d182bf0000e829fbfe/frameset.htm
    ctc stands for Client Transport Control and represents a method of configuration for transport routes.
    Kindly let me know if this was helpful
    Regards,
    Manomeet

  • "Transport zone is not defined for country US"  error during sourcing

    Hi Friends,
        I have an issue that is happening when I transfer purchase reqs from ECC to SRM sourcing. We are on ECC 6.0 and SRM 5.5.
    when there is a transport zone defined for a storage location for a certain plant, then transfer of that purchase req does transfer to SRM SOCO. I get a error "Transport zone MXXXXXX is not defined for country US".
    DNL_CUST_BASIS3, Prod0, Prod1 have been replicated from ECC to SRM. It works if there is no Transport zone defined for a storage location.
    SRM Org structure has Location and Storage locations defined that has Transport Zone and exists in ECC.
    This is stopping me from moving forward with proper testing. Please advise or suggest anyresolution.
    Thanks all
    Viktor P

    Dear Muthu,
       Thanks for the reply. There is another Address spro setting in SRM - Address Management where Transport zones can be nmaintained. I have not tried this Tcode as I do not have authorization.
    Thanks
    Viktor

  • How to check the layout defined for an ALV program

    Hi All,
    I have an ALV-program which uses radio buttons to display the list either in an Hierarchical format or in a Simple list format. In the selection screen there is a field for specifying the layout.
    Now the problem is, if a layout is created for Hierachical display and that layout is used to display the list in a simple list format the program doesn't give the desired output and vice versa.
    So i need to put a check in the program, to check whether the layout given in the selection screen is meant for a Simple List display or for an Hierarchical display and accordingly throw an error message regarding the mismatch if any.
    Is there any standard Function Module to check whether the layout is defined for a Simple List display or an Hieracrchical List display? Or is there any other way to do this checking????
    Thanks in Advance!!!
    Anindya

    Hi Venkat,
    The problem is:
    I need to know whether the LAYOUT(given in the selection screen) is defined for a SIMPLE LIST DISPLAY or an HIERARCHICAL LIST DISPLAY. Now say for example user has selected a layout which has been defined for a Hierarchical List display but by mistake he has selected the radio button for a Simple List display. So, here is a mismatch and the program should detect this and throw some error message. Instead it is now displaying a wrong output which is resulting from the mismatch.

  • Imported Objects - Package has a different Transport Layer

    Hi,
    We imported SAP objects into our DEV environment.  All the objects are in a Package where the transport layer is ZB60 which does not exist in our DEV environment.  I did a Request Consistency Check on the transport and I got the error "Only edit objects from package ZIVARA_SAP in local requests".  I tried to change the transport layer to what we have in our DEV system which is Z9EV but it only created a local Workbench request.
    How do I go about changing it to our DEV Transport Layer (Z9EV).  The objects that we imported are NOT going to be a one time import/installation.  We may be making some changes to the objects in the future and we want it to be transportable just like our own SAP objects.  Your reply is greatly appreciated.
    Thanks.
    Giscard

    Dear Giscard,
    Try importing the objects with Transport of Copies, then you should be able to edit them in your DEV system.
    Regards
    Shailesh Mamidwar

  • Transport layer and transport package

    I have a fundamental query on transport package and layer.
    Objects are classified in packages depending on the project and put in $TMP or test package else they are local ? Only objects belonging to a transport package can be transported , others are not ? How transport package is defined ? All objects must be a part of transport package else can not be transported ?
    ABout transport layer, I understand this is used to define which path objects will take during transport particularly when there are multiple transport routes. But what are the advantages of it ? How we can define it (trx code/menu path) ?
    Is it mandatory to use transport package and layers ?

    Hi Mike,
    Just to clarify a few basic concepts:
    A transport package (formerly called a "development class", a term you may still encounter) groups related development objects. Whenever you create a new development object (table, program, ...) you have to assign it to a package; the object is then placed into a transport request. Alternatively you can indicate it is a local object (its package is then "$TMP") but such an object is non-transportable.
    A transport layer identifies the route that transportable devmt objects must follow. Typically in your system you will have two layers: a layer usually called Zxxx (with xxx = SID of your development system) is used for your own developments. Another layer called "SAP" is used for transporting SAP objects, for example changes to standard SAP code implemented via transaction SNOTE and recorded in repairs. Without the "SAP" layer in place, repairs would be non-transportable.
    Each transport package belongs to a layer. You assign the layer when you create a new package in transaction SE80. You can change the layer later on, but this is rarely needed and can cause quite a few side-effects. SAP objects always have layer "SAP". The layers themselves are managed in STMS, under "Transport Routes".
    Hope this clarifies things,
    Rgds, Mark

  • Help is needed regarding PACKAGE -- Transport Layer

    Dear,
    I am working on CRM upgrade ,where i found one z-package
    in their production system.but if i look into it one z transport layer was defined and if i search for F4 i am not able to find that Trasport layer. how can it be possible to That package without existing Trasport layer.
    Please treat as urgent.
    Thanks in advance.
    with  regards,
    Rajesh c

    Dear,
    problem is regarding SAP SPI provided  by HP .
    i  am working on CRM 2007 upgrade project .in CRM 4.0 SPI package is present.
    but in this i am confused.
    as All dictionary objects , FM are starting with customer name space i.e Z---
    even package they are using is ZSPI for which Transport layer is ZLPO.
    but if i search for F4 i am not able to find ZLPO.
    and comment in FM is
    Copyright(c) 1998 by Hewlett-Packard Company.                       *
    All rights reserved.                      
    so shall i go for manual creation of these object .
    Please treate it as urgent.
    Thanks in advance.
    with  regards,
    Rajesh c

  • Is transport layer ONLY for consolidate router?

    I have reviewed some STMS configurations and come up with this conclusion:
    Transport layers other than "SAP"  are for consolidation  routers ONLY.
    In other wods, if there is no consolidation router, no transport layers other than "SAP" needed.
    Could you confirm my conclusion is right? And if so, why?
    Thanks!

    The definition of a consolidation route according to the course ADM325:
    A consolidation route defines the path (the successive system and/or client) that is followed by a change request immediately after the release from the development system. Typically, the consolidation route proceeds from the development system to the quality assurance system in the standard three-system landscape.
    A consolidation route is created from the development system to the quality assurance system through the transport layer Z.<SID>.
    A consolidation route is created from the development system to the quality assurance system through the transport layer SAP for the transport of SAP standard objects.
    Hope this helps.
    Kind regards,
    Mark Dijsselbloem

Maybe you are looking for