Why Trend Micro Nsc FireFow Extension doesnt work?
how do i get my anti virus to work with FireFox 4.1
Apologies for the slow response.
Firefox is on a time based release cycle, every 6 weeks we release a new version (more or less a few days). There are over 6,000 extensions available for Firefox, almost all of them from third-party developers. When Firefox switched to a new release cycle back in the beginning of 2011, all of those extension developers we notified of the change and how it would impact them. Some of them choose not to mark their software as compatible until it work for them. If Firefox were to wait until even 80% of the extensions were marked as compatible, there would never be an update. The responsibility to update add-ons is on the extension developer. Unfortunately, some choose to wait :/
Now, all that said, Mozilla does want to ease the pain of upgrades, so there are lots of ways we are working to improve the update process. [http://blog.mozilla.com/futurereleases/2012/02/03/improving-the-firefox-update-experience/ http://blog.mozilla.com/futurereleases/2012/02/03/improving-the-firefox-update-experience/] has some of the changes we have launched in the past few weeks.
Similar Messages
-
Trend-Micro NSC Firefox extension is incompatible with Firefox 10
When I open the add-ons screen for Firefox 10, I get a faded out message that Trend-Micro NSC Firefox extension is incompatible with Firefox 10. I've contacted Trend Micro about updates and they said that it would be a few weeks before they release an updated version. Why do you release and force updates when important extensions are not ready?
Apologies for the slow response.
Firefox is on a time based release cycle, every 6 weeks we release a new version (more or less a few days). There are over 6,000 extensions available for Firefox, almost all of them from third-party developers. When Firefox switched to a new release cycle back in the beginning of 2011, all of those extension developers we notified of the change and how it would impact them. Some of them choose not to mark their software as compatible until it work for them. If Firefox were to wait until even 80% of the extensions were marked as compatible, there would never be an update. The responsibility to update add-ons is on the extension developer. Unfortunately, some choose to wait :/
Now, all that said, Mozilla does want to ease the pain of upgrades, so there are lots of ways we are working to improve the update process. [http://blog.mozilla.com/futurereleases/2012/02/03/improving-the-firefox-update-experience/ http://blog.mozilla.com/futurereleases/2012/02/03/improving-the-firefox-update-experience/] has some of the changes we have launched in the past few weeks. -
I am not able to install my Trend Micro Titanium in FF4. I received an error code, Trend Micro NSC Firefox Extension6.5.0.1234false, + the actual numbers.
Unfortunately, contacting them didn't solve the problem. I will submit my question again, but I will word it correctly.
-
Why is the fb video call doesnt work with macbook?
why is the fb video call doesnt work with macbook?
Hi
Just to correct GerdW - the vis of a polymorphic vi do not have to have the same output.
Have a look at the vis I attached. I just pass a dbl to a polymorphic vi and get a dbl in one vi and a string in the other.
The real problem is that the vi has to be set to the necessary type. If there are different inputs you just can wire them to the polymorphic vi, but this does not work with the outputs, so you have to set the type.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
Polymorph.zip 14 KB -
The Trend Micro software runs and takes updates, but it does not pick up any viruses. I looked under troubleshooting and it shows the extension is disabled. I am concerned that my computer is open to damage from malicious software. I am looking for a patch or update to enable the Trend Micro software.
Yours Truly
Steve-> Close Firefox (click '''Firefox''' button and click '''Exit''' OR File Menu -> Exit)
-> Start Firefox in Safe Mode by Holding down the '''Option''' key while starting your Mozilla Firefox application. (If the Profile Manager opens, select a profile and then hold down the '''Option''' key again while clicking the button to start Firefox.)
* As an alternate method, go to Utilities (in the Applications folder) and open Terminal, then run:
** /Applications/Firefox.app/Contents/MacOS/firefox-bin -safe-mode
-> Firefox Safe Mode window will appear -> DON'T SELECT ANY OPTIONS, just click '''Continue in Safe Mode'''
Now try to download Firefox while you are using Firefox Safe Mode. Check and tell if its working. -
Does Trend Micro Web Protection add-on work with Firefox 5??
negotiating the screen changes just to ask a simple question took me through 9 screen changes already!!! why the "screen testing"? I am not trying to get a part in a movie. Simply, when I checked "help", "forum",and now prompted to ask this as a "new" question although I saw in forums 450 or so users complained that their FF4 was not compatible as the last version of 3 was. Without taking 6 hours of searching 25 more screen changes: simply does anyone know if this will crash/hang/send error pages or damage our PC's to have FF5 and this TM security add-on together? thank you for your consideration of my question, and I apologize if my fonts show up on your side and are bothersome. I need them for my vision impairment
NOTE: Firefox 4 and 5 are in the past. Firefox 6 is the current version. Beginning with Firefox 5, the prior version is "abandoned" and will receive no more security or stability updates. The security and stability updates are included in the new version that follows.
As for the screens, the developers of the Firefox help system/forum/knowlegebase are trying to make the system as user-friendly as possible and the work is an on-going process. You are presented with possible posts that match your question so that the few unpaid volunteers here are not excessively over-burdened with questions that have previously been asked and answered. We receive more questions than the few volunteers willing to devote their time to this forum can answer. The search functions on this forum are recognized as "lacking" in many respects and are currently under serious review and re-development. The "Ask a New Question" screens were designed to collect the appropriate information that the unpaid volunteers here need to assist you with finding a solution.
'''Now, on to your real question.'''
The developers of products that install toolbars into Firefox determine with what versions of Firefox those toolbar will work.
*Generally only the toolbar gets disabled in a new version of Firefox and the underlying application continues to function properly. You can post your question(s)/concerns on the Trend Micro forum below for clarification directly from the source (the developer).
*That Firefox version information is coded into the toolbars that they develop '''''and''''' only the developer can change that compatibility information after they complete their testing.
That said, all third-party developers know how/where to find the Firefox release schedule and how/where to find the test (beta) versions of Firefox to use in testing their products for up-coming releases. The beta testing will last several weeks, but it is the developers' responsibility to keep up with the changes in Firefox. Mozilla (Firefox) has made a concerted effort to encourage third-party developers, especially those producing security products (firewalls and AV/AS), to update their products prior to a new Firefox release. A couple of security product vendors were ready on 08-16-2011 when Firefox 6 was released. Several are still working on their updates and do not seem to be concerned about the happiness/unhappiness or the security of their paid or non-paying (free version) customers.
'''''Here is the latest from Trend Micro'''''; the last (7th post) in this thread on the Trend Micro forum is from someone identified as '''''slabster''''' (Customer Service Manager) and was posted 6 hours ago: http://community.trendmicro.com/t5/Home-and-Home-Office-Forum/Firefox-6-amp-TM-Firefox-Extension-6-5-0-1234/td-p/43735
I am not a Trend Micro user and, therefore, do not know what function(s) its toolbar performs. Firefox has built-in Phishing and Malware protection (Safe Browsing) to help keep users away from known malicious websites:
*http://www.mozilla.com/en-US/firefox/phishing-protection/
*Sample warning screens:
**http://www.mozilla.com/firefox/its-a-trap.html
**http://www.mozilla.com/firefox/its-an-attack.html
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
FF4 does not support Trend Micro Titanium and Trend Micro has not developed a work around. Have you?
Because of the existing problem with FF4 not supporting my paid subscription to my security software, I've used FF4 sparingly. Trend Micro is "developing" a work around. Can some one please suggest how I can start using Firefox again. I tried to go back to FF3. That didn't work out, either.
Found the following on the TrendMicro forum:
*TrendMicro forum: http://community.trendmicro.com/
*Found fix in this thread: http://community.trendmicro.com/t5/Home-and-Home-Office-Forum/Firefox-6-amp-TM-Firefox-Extension-6-5-0-1234/td-p/43735 (posted by PartyJetsetGo, Customer Service Manager)
*[Hot Fix] B1306: http://esupport.trendmicro.com/solution/en-us/1059243.aspx
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
Why does the polymorphic vi doesnt work??
why does the polymorphic vi doesnt work??
if i connect the output with an string or double array there is always an error.
why?
markus
Attachments:
DeCoderVIs.llb 62 KBHi
Just to correct GerdW - the vis of a polymorphic vi do not have to have the same output.
Have a look at the vis I attached. I just pass a dbl to a polymorphic vi and get a dbl in one vi and a string in the other.
The real problem is that the vi has to be set to the necessary type. If there are different inputs you just can wire them to the polymorphic vi, but this does not work with the outputs, so you have to set the type.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
Polymorph.zip 14 KB -
Safari and trend micro web site filter not working
IE blocks web sites as defined by my web site filter in trend micro (pcillin) however, sites such as **** are not blocked when using safari. It is as if Safari is bypassing my firewall. Should I be concerned and how do I fix this.
I had the same question ....
here is the response I got from Trend Micro :
Thank you for contacting Trend Micro Technical Support. I'm Ken and please allow me to provide you assistance with your questions and concerns about our product.
First of all, we would like to extend our apologies for the delayed reply and for any inconvenience this has caused you. We have been upgrading our system and this caused some problems with our Server and we greatly appreciate your patience during these times.
I have carefully read your email and I understand that you have question if there is a settings in PC-cillin Internet Security for Safari in order to block websites.
With regards to your concern, PC-cillin Internet Security 2007 does not support Safari web browsers.
Below are the supported web browsers:
o Microsoft Internet Explorer 5.5 Service Pack 2 (SP2) or above
o AOL Browser 9.0 Security Edition
o Mozilla Firefox 1.5
o Netscape 7.2
If ever your issue has been resolved, please email us back with a simple "close case" message so that we could formally close this case. It is always our pleasure assisting you.
Thanks for choosing our product! -
Why default panel in Spry Accordeon doesnt work ?
The solution do the default panel when a new page is loaded seems to be:
<script type="text/javascript">
var acc1 = new Spry.Widget.Accordion("Acc1", { defaultPanel: x });
</script>
(x=number of the panel minus 1)
This is written in many tutorials.
But i've tried and only works with default panel 0. When i try with
number 2 for instance, the head/tab is marked but doesnt expand.
Anyone knows what's wrong ?I don't see any defaultPanel options in your constructor..
<script type="text/javascript">
<!--
var Accordion1 = new Spry.Widget.Accordion("Accordion1");
//-->
</script>
Should be:
<script type="text/javascript">
<!--
var Accordion1 = new Spry.Widget.Accordion("Accordion1", {defaultPanel:2});
//-->
</script>
Keep in mind that default panels are zero based, so panel 1 is actually panel 0. -
Why does firefox v 29 not enable the Trend Micro extension
Extensions
Name Version Enabled ID
Trend Micro BEP Firefox Extension 7.5.0.1137 false [email protected]
Trend Micro NSC Firefox Extension 6.8.0.1096 false {22C7F6C6-8D67-4534-92B5-529A0EC09405}
Trend Micro Toolbar 6.0.0.2030 false {22181a4d-af90-4ca3-a569-faed9118d6bc}
Since the upgrade to v29 I am also getting plagued with advertising pop ups that I cannot disable.Do the following:
* Update to Firefox 30 [[Update Firefox to the latest version]]
* Scan for malware, [[Troubleshoot Firefox issues caused by malware]]
* Reset Firefox, [[Reset Firefox – easily fix most problems]]
* Install Adblock plus, www.adblockplus.org/
The trend micro extensions are a waste of resources, so don't even bother with them ;) -
When I open the add-ons screen, I get a faded out message that Trend-Micro NSC Firefox extension is incompatible with Firefox 4. Below it is another faded out message that Trend-micro toolbar is incompatible with Firefox 4.
Do these messages mean that I'm not getting the Trend-Micro protection, or that I just can't open Trend-micro from within Firefox 4?
I've been using Trend-micro for a long time, and I really like it.No that's wrong, the update for the trend micro toolbar will be issued the second week of JUNE 2011. How do I know this?
http://esupport.trendmicro.com/solution/en-US/1058585.aspx%EF%BB%BF
Says so there. Want more info?
http://community.trendmicro.com/t5/Home-and-Home-Office-Forum/UPDATE-Toolbar-For-Mozilla-Firefox-4-0/td-p/32014/page/4
Hope this helps, because I am one of the people as well with Firefox 4 and no Toolbar. -
Trend Micro will not work with Firefox 9.0.1
With the latest upgrade (again) of Firefox 9.0.1 Trend Micro will not work and cannot be enabled. I use Trend Micro Titanium Maximum 2012. This feature worked fine before the latest upgrade. Why can't Firefox at least try to beta test their latest and greatest before problems like this happen?
Trend Micro BEP Firefox Extension7.0.0.1086false{38783831-6098-4faa-A9C9-1EE1E343F4D2}Trend Micro NSC Firefox Extension6.8.0.1066false{22C7F6C6-8D67-4534-92B5-529A0EC09405}Trend Micro Toolbar5.0.0.1361false{22181a4d-af90-4ca3-a569-faed9118d6bc}Perform the suggestions mentioned in the following TrendMicro Community post:
* [http://esupport.trendmicro.com/solution/en-us/1059975.aspx]
Check and tell if its working. -
On add-ons manager, I see that Trend Micro NSC Firefox Extention 6.5.0.1234 is not compatible with Firefox 4.0.1. I have contacted Trend and been told that their builders have not yet created a product that is compatible. I think this means that I should revert to an older version of Firefox until my internet security is updated. How do I do this? I'm clueless. :) Or, is there a better solution?
http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox
http://www.mozilla.com/en-US/firefox/all-older.html -
Trend-Micro Smart Surfing for Mac
I know that malware is not a big concern for Mac users, yet. However, I am interested in trying new products as they come out. I use Trend-Micro products for Windows at work on a daily basis and they are a fantastic company when it comes to malware protection. They just came out with their first product for Mac: Trend-Micro Smart Surfing for Mac. I was thinking of using the 15-day trial just for the heck of it. Does anyone have any experience with this software?
This topic has been brought up countless times on the forums. Search for the word "virus" and you'll get quite a few hits.
Here's one: http://discussions.apple.com/thread.jspa?messageID=9244196�
Limnos' post is probably the one to look at.
Many of the long-time users here agree that the most effective anti-spyware/malware/adware/what have you protection is for the user to pay attention to what he/she is doing.
-Create a standard user account and use that for daily tasks. Use the admin account to perform updates.
-Don't download files from sites you don't know. Don't install anything unless you know what it is.
We did use the Virex anti-virus system years ago for one of our Macs. It was running OS 7 (ancient history, really). None of our current Macs, all of which are running OS X Tiger or Leopard, have any anti-virus software installed, and we haven't had any problems.
If you do choose to install anti-virus, the only real reason to do so is to prevent the spread of any Windows viruses that make their way onto your machine.
~Lyssa
Maybe you are looking for
-
Report Performance - Summary Fields Setting
I have a report data model with 3 groupings. Summary fields are needed for each group. There are 2 approaches for me to have the summary values : 1. i can set the data source of each summary field to be the corresponding column of my based Q_1 select
-
After lots of tests using mac hardware test, and switching various memory pairs into different slots, I conclude that one of the slots is bad. It is slot J44 on my 1.8 dual G5. Before I take the G5 into a shop to get a new slot installed, I thought I
-
How to highlight/indicate particular tree Node in Tree UI element
Hi All Can anybody let us know how to highlight/indicate specific node in a tree struture. currently i am able to display the tree struture with all the nodes & elements but it is always tasking firstnode as highlighted one or indicated one. if i wan
-
Single invoice against mutiple sales order for a single customer PO
Hi all, Customer provide a single order via EDI per Depot. When the order is received into SAP these are split into multiple order based on the Production or distrubtion location of the products. The customer will receive a number of deliveries to t
-
Downloaded assistant. now what?
I have windows8. I clicked in for a free trial of adobe flash player in order to download a free textbook chapter. Adobe allowed me to install adobe assistant. The icon is on my desktop but after it appeared, nothing else happeed. have I installed Fl