Why TRIP cann't be put on HOLD if trip has "trip segment" only using PR05

Why we canu2019t put a trip (PR05) u201Con holdu201D if the trip has u201Ctrip segment onlyu201D tab only. Itu2019s possible to do this using PRAP but not through approval screen i.e. ACTEXT_APPR_LITEu201D.
Thanks
Mohanty

Well that's just the most ridiculous response I've ever heard.
1: There are plenty of very large and successful companies who still serve their customers through sites running image maps.
2: Image maps are still part of the HTML 5 specification so browsers should support them - mobile or otherwise.
More to the point - up until now iOS + Safari handled image maps perfectly well. All of a sudden a portion of mobile users on many, many sites will experience difficulty navigating through the site. That's pretty bad.
And - who do I want to serve with my site? As many people as possible thank you very much. It's a very, very bad developer who only targets the latest devices and platforms. Sure - we have to draw the line somewhere.. maybe IE6 is a cut off point but it's a simple case of looking at your webstats and making sure your site works for as many people as possible.
For many, large and very successful sites that use image maps (of which there are many) a simple 'fix' and move to responsive solution could involve months of development, testing and investment.
chrisnetonline - in answer to your question, assuming you have jquery on your site, a fix would look something like this:
  $("body").on('touchend', 'area', function () {
                window.location = $(this).attr("href");
But - you may want to wrap your image map in a wrapper element and target that rather than the entire body tag. And - you'll also need to check how far the user has scrolled so you don't trigger a redirect when they scroll.
Like I say - this is just a demo of a possible solution and would require testing and refining to suit your particular requirements.
Ideally there would be a better solution than this though.
Ideally the problem wouldn't be there in the first place.

Similar Messages

  • How many songs can you put in an Ipod touch 64GB if you only use it for music?

    I've heard the Ipod classic 160GB is discontinued. Could someone tell me how many songs you can put in the Ipod touch 64GB if you exclusively use it for music and don't put any photos, videos or anything?

    I just did some quick figuring. There are a lot of variables. My 64gb 5th gen touch has only 56.6gb capacity so says the unit. Settings>General>About.
    MP3 formatted songs vary greatly. I quickly perused my collection and found that the size varied from 3-7MB per song. Using the average of 4MB per song,(7MB is a rather large file for MP3) you will come up with 56.6 X 1024MB (1024 MB per 1GB) =57958MB/4 =14489 songs. This will probably never happen as there is cover artwork and different variables because of file size to consider. This gives you an Idea where to start.

  • Why do I have to put in my password every time on sites that used to save them?

    I have to retype my password on Facebook and Amazon every time I log on, instead of it using my saved one.  Why?

    Turn off Private Browsing
    Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off.

  • HT5622 Why is there a message saying, "This Apple ID has not yet been used in the itunes store"

    Why is there a message saying that my apple id has not yet been used in the itunes store? i just registered

    Hi midanjm,
    This prompt is usually displayed when your Apple ID needs to be configured for purchases. We'll need to run through the additional steps to setup your country, and payment information. See Step 10 and above on this resource (For iPhone, iPad, or iPod touch):
    iTunes: How to set up an Apple ID within iTunes
    http://support.apple.com/kb/HT2731
    Tip: If you are trying to create an account using an existing Apple ID, like your iCloud email address, you will receive a prompt telling you that your email address is already an Apple ID. Simply tap Continue, and then tap Use Existing Account on the following screen.
    - Next, you'll be required to enter your billing information. To choose a different Credit Card type, tap one of the available options, and then tap Done. You will not be charged until you make a purchase.
    - Once you've filled out all of the fields for your billing information, tap Next.
    For additional information:
    Using an existing Apple ID with the iTunes Store and Mac App Store
    http://support.apple.com/kb/HT2589
    Thanks,
    Matt M.

  • When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

    When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Iphone order put on hold!?

    I got an email that my order was put on hold because they needed a 400 security deposit but why didnt that come out of my bank? Not enough money? and will my phone now take longer to get here since i have to wait till tomorrow morming to call?

        Hi codylock,
    Sorry about the inconvenience with your order. Hopefully this issue has been resolved. In case it hasn't, please visit  our http://bit.ly/RWWFB to check the status of your order. Please let us know if you need additional help.
    Thanks,
    NidiaA_VZV
    Please follow us on Twitter @VZWSUPPORT

  • Skype Call Put on Hold when another Phone Call com...

    Why does my active Skype call automatically get put on hold when a standard phone call comes through on my iphone 6?   I would prefer to manually switch between calls and I hold many conference calls through SKYPE.
    I am using the current version of Skype and iOS 8.

    Hi,
    Please check if you enable conferencing in topology builder, you can check on the Standard edition topology below “Feature and functionality”.
    Please also try to re-run the Lync Server Components install from the Deployment Wizard and check services again.
    If the issue persists, you can use the Lync server logging tool on FE server to test the process of conferencing.
    Here is the link of using the Lync logging tool:
    http://blog.schertz.name/2011/06/using-the-lync-logging-tool/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Skype call put on hold

    hi all anyone facing this issue . always Skype call put on hold when I make call to others. there is no option every time I need to cut the call again for making a call . it is really irritating . I am using iOS 8 .

    Hmmm.. thinking the conspiracy theory of Microsoft nobling Android to sell their own phone operating sys is a good one as I can see no reason why Skype have not fixed this long standing, and very important issue. I have tried various versions of Android on various phones and headsets, the problem seems to be with all, only common factor, Skype on Android. I have seen no official response from Skype on any of the multiple forum threads discussing this problem. All I can say, in my opinion, is Skype is the problem, not an Android one, it's on your doorstep! Plantronics, who have supplied me most headsets, can only offer the advice that it worked fine on Skype Ver 2, and not worked properly since (when did Microsoft buy Skype?). I pay Skype for a service but they are leaving me with no alternative but to vote with my feet, Viber works and I think I need to start looking at all alternatives. Maybe I should look at Linux on the PC too!

  • HT201303 Why do I have to put payment verification in for free aps?

    Why do I have to put payment verification in for free aps?

    You are required to provide credit card details to download apps be it free or paid.
    Nothing will be deducted from your credit card if the app is free.
    There will be a authorizing hold of US$1.00 to verify your account information. It will be credited back to your account later.

  • Is there really not an email address for tech support that you (or I, if absolutely need be) could forward my below email to?  ( I really do not want to waste time being put on hold on the phone.)  Issues times 3 - Regarding iPad 2 with IOS 7:  1.)  I can

    Is there really not an email address for tech support? ( I really do not want to waste time being put on hold on the phone.)
    However, I have 3 Issues Regarding iPad 2 with IOS 7:
    1.)  I can no longer open up the apps from the update page. (I used to be
    able to & it was a quick way of making certain that I wanted to keep an app
    before I updated it.
    2.)  I have many apps that I have updated since installing the new
    operating system & they now have "open" symbols next to them, but I don't
    know how to get them off of my update list (since that has already been
    done to them).
    3.)  My iPad has gotten stuck or frozen more in this last week since the
    new update then has in the last 2 years put together. (It seems to be stemming from the "Updates" page as sometimes  that page is just white & will not open, even though everything else opens & I have an internet connection.)

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
     Cheers, Tom

  • Why can't I actually put widgets on the desktop?

    Why can't I actually put widgets on the desktop and have stay on the desktop; not float on top of all my programs so I can’t see what I am doing?
    I know there are a few widgets that claim to do this, but they don’t! (Dashit)
    Here is the main problem that I have with Dashit; it doesn’t go on the desktop, it floats on top of every program and you can’t make it actually put it on the Desktop! This makes this little widget useless! Why can’t anybody make a widget that actually puts the widgets on the desktop?
    What use is it if the darn things just float on top of every program? This just gets in the way. Dose anyone know of a widget or a way to actually put the widgets on the desktop?

    Garret, the only way to put Dashboard widgets on the desktop and select the level they live in (so they don't float over everything) is to use either Amnesty Widget Browser or Amnesty Singles. Both are shareware.
    Disclaimer: I may receive some form of compensation, financial or otherwise, from my recommendation or link [my company developed Amnesty].

  • How to de-activate a customer and put on hold if inactive from long?

    Hi all,
    My client needs that if a customer is in- active from last 6 months, it should be de-activated and put on hold by the system. Can we do it by creating a job at back-end?
    Regards,

    Hi Suda,
    Is that true for creating functions and views as well? I mean is it also not recommended to create functions and views in SBO company databases? Actually we have very complex reporting requirements and for that we want to create some functions or views so that multiple joins in crystal reports could be avoided. Please let me know if we can do that for reporting purposes?
    Regards

  • How to Post a Document earlier Put on HOLD (F5) -through MIRO

    Hi SAP Experts
    can any one explain
    how to the document on hold and how post that document i put on hold
    tocde and paht
    Regards
    sure

    hi,
    1) goto transaction:
    FB01 - document - get held document(f5)
    2) fb11 - list
    A.
    Message was edited by: Andreas Mann

  • Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

    Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

    Yes, I know. I have been working with HDV for some time. I am wondering why it doesn't render when it needs to.. the red and bright-green lines are above, and I've set the render settings such that ANYTHING I highlight and hit apple-R will render. But its not rendering at all.

  • Why not make a phone that can hold two different s...

    Why not make a phone that can hold two different sim cards ?

    11-Jan-2009 10:18 PM
    hermandh wrote:
    Why not make a phone that can hold two different sim cards ?
    I guess time will come...but I don't see the main point of having two sim cards on a phone at the same time?
    Knowing the phone won't let this go on, Can you take up two calls at the same time? Probably not.
    =)

Maybe you are looking for

  • Third Party Sales Incorrect Status Update at the order level

    Hi, We follow a third party sales in our system Sales order > PR> PO> MIGO>MIRO>VF03 Howeevr, the status of the sales order is being processed. The quantity is same, item relevance for delivery is unchecked at schedule line and item category. Our use

  • Using PSE on Mac - when attempting to Edit a file system is saying need Premiere Elements to proceed. Help pls!!

    Using PSE on Mac.  When attempting to Edit a file system advises that requires Premiere Elements.  Help!!!

  • Collective production order---GR/GI problem

    Dear guru My scenerio is collective production order. I have created PUMP header material and 2 component in that component i have maintained 52 special procurment key . and automatically 3 production order are created . Now I want to create a stock

  • Created on Date for Adhoc Query

    Hi Everyone, I have a requirement for creating a query which will list the adhoc queries created by the power users. User - Query - Infocube - Created on - No of Navs - Last Used. Is there a way to make the BW Stats system give me the 'Created on' Da

  • Does This Sound Good?

    I'm a student and am looking at purchasing a MacBook Pro to replace and old Dell Desktop. On my laptop I plan on having about 40-50Gb of iTunes movies, Music, TV Shows, etc. Also, being a student, I am obviously going to use Microsoft Office all of t