Why user can not open Production Order form with readonly privilege?

hi guys,
today I got a problem when I assign the minimize privilege for a new user.
the user only want to query status about Production Order, so I assigned the privilege with readonly on Production Order, and disabled all others.
But when user logged on, and click on the 'Menu -> Production -> Production Order', there pops up an error message said 'To generate the document, first define the numbering series in the Administration module'.
Do I have to find some other privileges to assign for the user account?
thanks for your help.

Thanks.
But there were 10 groups look like from 'Series - Group No. 1' to 'Series - Group No. 2', How did I know which one was assigned to Production Order?

Similar Messages

  • CO08 can not create Production Order!!!

    Dear Experts
    We are running an MTO(make to order) scenario!
    First we create an contract in the system!Then we create sales order
    with reference to this contract!
    And when the sales order is sent to the planning department! They use
    TCODE:CO08 create production order with reference to the sales order!
    But we get an error message as follows:
    Account assignment cannot be carried out because of different origin no.
    Message no. V1134
    Diagnosis
    The sales document to which you want to refer is based on sales document 41033737 and item 000010.
    Therefore, the settlement and possibly inventory management are carried out using the number of the
    preceding document.
    ut when I entered the the contract in Co08 and then I am able to create
    the production order.
    And when I back to see the detail in the sales order ,I find there is no
    value in the account assignment to the profitability segment!!
    Why the sales order have no profitability segment??*
    Why we can not create production order with reference to sales order??
    It seems there are one problem!
    Thanks for any reply!!

    Fei Liu,
    The current situation that you have described is pretty standard functionality for most MTO requirements classes.  Account assignment is normally to the reference doc, not the 'Release' Sales doc.  This includes quotations as well as contracts.
    If your business requirement is to instead use the Sales Doc number, and not the Contract number, you can change this by setting OVZG "Account Assignment Consumption" to 'blank'.
    http://service.sap.com/sap/support/notes/459734
    http://service.sap.com/sap/support/notes/729381
    Rgds,
    DB49

  • Why I can not open the downloaded applications in my iphone 4s?

    Why I can not open the downloads applications? Please show me the way.

    why you cant open? what does it says? have you tried using an valid apple id?

  • Why i can not open Video Capture Device Settings in  Adobe Flash Media Live Encoder?

    Hi! I've got a problem with Adobe Flash Media Live Encoder 3.2. Why i can not open Video Capture Device Settings? I'm clicking this button, but it doesn't appear, there is just a blinking of the camera's window. Please help me, i'm looking like a shining red pig! Need to change the light or contrast.

    "The audio preview in FMLE indicates there IS audio being input"
    How do you know this?
    are you "Saving to file"? how is the audio in the saved file?
    Adninjastrator

  • Why I can not open facebook on my desktop

    '''why I can not open facebook on my desktop'''

    Trangipani & Rod21
    502 Bad Gateway
    nginx/1.0.6
    When try to access Facebook via Hotspot Shield. Safari said below. check and uncheck any web proxies, the same results.
    502 Bad Gateway
    nginx/1.0.6

  • HT1766 why i can not open my passcode

    why I can not open my passcode

    why can you not formulate a question that makes sense and gives details as to what exactly you're referring to?

  • Why I Can not Open a safari preferences,

    Why I Can not Open a safari preferences,
    I not even able to write a web address. My home page is aol I have to search to be able to open a web page
    everything starts after I Update my computer to OX X Yosemite
    Can Someone help me

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take the action that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Why I can not open documents?

    Why I can not open documents?

    What version of Acrobat?
    Reader, Standard or Professional?
    Can you open Acrobat?
    From Acrobat can you open documents? (File > Open)
    Is the problem specific to double-clicking to open?
    What OS

  • Why I can not open curtain websites?

    why I can not open curtain websites? Anyone else have this problem?

    Probably sites about PCs - you know, the ones that cover Windows.
    Seriously, what Web sites can't you open?

  • When i open my computer this appears "c:\Programdata\AppleVerifierPolicy.dll  the specific module caould not be found"  i think this may be the reason why i can not open itunes store

    when i open my computer this appears "c:\Programdata\AppleVerifierPolicy.dll  the specific module caould not be found"  i think this may be the reason why i can not open itunes store

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • I can not open some internet sites with my ipad

    since i download new apple software 7.2 i can not open some internet sites with my ipad! it lets me open only english sites nothing else...

    Try a soft reboot and see if that helps.
    1. Press and hold power + home button until screen goes off and apple logo appears.
    2. Once the apple logo appears release both buttons and let the phone reboot.
    This helps clear temporary files. I assume you've tried deleting safari from multitasking?
    You could always try using a different app top browse the internet.
    VPN is another solution as it has helped me out before.
    Hope this helps.

  • Hi, i can not open an apple id with my internet card, can you help me please

    hi, i can not open an apple id with my internet card, can you help me please

    What country are you in, and are you trying to use another country's store ?

  • Why I can not open youtube apps in my iPad air? Anyone can help?

    first thing happened was I can not open the youtube apps here in my iPad air. Then I try to delete it then install again but same thing happens. Then I try to refresh my iPad but still same thing happen again I can't open. Then I figure it out that maybe I need to update my software device from ISO 7 to ios 8 but worst thing happened. I can't open the YouTube apps again and my movie box apps I can't open also. And my iCloud settings i can't access also beacause they said need to check my email and verify my iCloud settings. But worst thing happen is I forgot my password in my email.. god! Can anyone help me pls of what I'm going to do? To fix this problem? Thank you!

    You do NOT need to restore your iPad.
    I believe that the problem is that there is a disconnect with your iTunes account and your iPad. What you are experiencing is a somewhat common issue after you sync your iPad, update your device - it could be a number of reasons that are causing it. the recommended fix is to download another app in order to "reconnect" your ID and iTunes account to the iPad.
    You can read more about it here. You will need a WiFi internet connection in order to fix it - or you have to be able to sync with your own iTunes library.
    iOS: Troubleshooting applications purchased from the App Store
    But this is what it says in the article.
    3. Install another app from the App Store
    If none of your user-installed apps will launch, there could be an issue with Apple ID authorization. Download and install a free (or paid) app that isn't already installed on your device to reset this information. You could also remove an app from your iOS device and download it again from the App Store or sync the app from your computer.
    Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.

  • Can not open the ebs form

    This issue is that i can not open the form ,I checked the application.log,find erro:
    09/04/24 12:21:50.201 10.1.3.0.0 Started
    09/04/24 12:21:51.470 formsweb: FormsServlet init():
    configFileName: /oracle/prod01/inst/apps/PROD01_erp199/ora/10.1.2/forms/server/appsweb.cfg
    testMode: false
    09/04/24 12:21:51.479 formsweb: 10.1.3.0.0 Started
    09/04/24 12:34:28.975 formsweb: ListenerServlet init()
    09/04/24 12:34:30.17 formsweb: Forms 会话 <1> 在启动过程中失败: 没有来自运行时进程的响应
    09/04/24 12:34:30.17 formsweb: Forms session <1> exception stack trace:
    oracle.forms.engine.RunformException: Forms 会话 <1> 在启动过程中失败: 没有来自运行时进程的响应
    at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
    at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
    at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
    at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRe
    questDispatcher.java:702)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(
    ServletRequestDispatcher.java:359)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpR
    equestHandler.java:870)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpReq
    uestHandler.java:451)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.j
    ava:299)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.j
    ava:187)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(Re
    leasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    here is another erro :
    /oracle/prod01/inst/apps/PROD01_erp199/logs/ora/10.1.3/opmn/forms_default_group_1、formsstd.err
    Error: <connector name="OracleASjms" path="OracleASjms.rar" /> will not be bootstrapped since corresponding module declarati
    on was not found in application.xml.

    Thank you hsawwan ,I did it as your methods,and i also checked your thread,but I still have the same problem.
    when I start the formserver ,here is the erro:
    [[root@erp29 ~]# more /oracle/prod/inst/apps/PROD_erp29/logs/appl/admin/log/adformsctl.txt
    adformsctl's LOG:
    04/28/09-09:04:52 :: adformsctl.sh version 120.12.12000000.3
    04/28/09-09:04:52 :: adformsctl.sh: starting OPMN if it is not running
    opmnctl: opmn is already running.
    04/28/09-09:04:55 :: adformsctl.sh: Starting OPMN managed FORMS OC4J instance
    opmnctl: starting opmn managed processes...
    ================================================================================
    opmn id=erp29:6200
    no processes or applications matched this request
    04/28/09-09:04:55 :: adformsctl.sh: exiting with status 150
    ================================================================================
    adoacorectl's LOG
    04/28/09-09:04:51 :: adoacorectl.sh version 120.11.12000000.2
    04/28/09-09:04:51 :: adoacorectl.sh: starting OPMN if it is not running
    opmnctl: opmn is already running.
    04/28/09-09:04:51 :: adoacorectl.sh: Starting OPMN managed OACORE OC4J instance
    opmnctl: starting opmn managed processes...
    ================================================================================
    opmn id=erp29:6200
    no processes or applications matched this request
    04/28/09-09:04:52 :: adoacorectl.sh: exiting with status 150
    ================================================================================
    adapcctl's log
    04/28/09-09:04:51 :: adapcctl.sh version 120.6.12000000.2
    04/28/09-09:04:51 :: adapcctl.sh: starting OPMN if it is not running
    opmnctl: opmn is already running.
    04/28/09-09:04:51 :: adapcctl.sh: starting OPMN managed OHS instance
    opmnctl: starting opmn managed processes...
    ================================================================================
    opmn id=erp29:6200
    no processes or applications matched this request
    04/28/09-09:04:51 :: adapcctl.sh: exiting with status 150
    ================================================================================

  • When I attach a document and send as an email, non apple users can not open it?

    For my business I have to send invoices to customers, When I attach the invoice to an email non apple uses can not open the file? why is this.
    I have tried to copy and paste the invoice to body of email and when they get it it appears as a question mark in a box?
    how can I fix this?

    Couple of thoughts.
    When you have the Mail compose window up, there should be a row of icons along the top right side. One of these is a paperclip for attachments. Click it, and check the Send Windows-Friendly Attachments. This will help for non-Mac Mail recipients. Ultimately, it will be their email system, and how it is configured that will determine how their attachments arrive — not you.
    Send your invoices as PDF, not Pages, or Word content. Since you don't mention your operating system or release of Pages, I will cover the bases here:
    Pages '09
    One can use the Share menu to send a PDF via Mail. It does the export to PDF, opens Mail, and attaches the PDF. (Broken in Yosemite).
    File ▸ Export ▸ PDF…, and then drag/drop the PDF into a Mail compose Window. If document size, right-click on it and choose View as Icon.
    Pages v5
    On the right-side of the Toolbar, there is a Share icon. Choose Send a Copy > Email > PDF. This auto-attaches to a new Mail compose window.
    File ▸ Export To ▸ PDF… . Same as Pages '09, second bullet.

Maybe you are looking for