Why v r not configuring IDoc & HTTP adapters on sender side

Hi Gurus,
Y v r nt configuring the Idoc and HTTP adapter on sender side.
But on d receiver side v r configuring. Why?
IDoc and HTTP Adapters are built on ABAP stack.That's y v r nt configuring on d sender side.It is the same thing also on d receiver side also.But y v r configuring on reciever side.
Could u guide me.

Hi Kumar,
Check this thread for your query
Adapters
IDOC adapter resides on Integration server, so Integration engine takes care of the conversion format from IDOC to XML
but in but XML to IDOC is done by Receiver IDOC adapter
Sachin
Edited by: Sachin Dhingra on Jan 10, 2008 4:03 PM

Similar Messages

  • Why Application ack not supported in Reciever adapters?

    Hi All,
    a.What is difference between Application and System acknowledgements ?
    b. Why  Application ack not supported in Reciever adapters (except for CIDX and RNIF)?
        (as mentioned in http://help.sap.com/saphelp_nw70/helpdata/en/0d/5ab43b274a960de10000000a114084/content.htm)
    c:http://help.sap.com/saphelp_nw70/helpdata/en/e1/091640a991c742e10000000a1550b0/content.htm
    says  If messages are sent from the PCK to the Integration Server, you must create a receiver XI adapter in the PCK.!!
      Should not this be either way?
    Regards
    Guru

    <b>a.</b> System acknowledgments used by the runtime environment to confirm that an asynchronous message has reached the receiver.
    Application acknowledgments used to confirm that the asynchronous message has been successfully processed at the receiver.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
    <b>c.</b> No
    Message was edited by:
            Prabhu  S

  • Settings  if  http adapter is sender side?

    Hi ALL,
    my doubt is if http adapter is sender side how to make settings to before configuring a scenario, because we don't have sender comm. channel, sender agreement.

    Hi-
    Check this help
    http://help.sap.com/saphelp_nw2004s/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
    Also check this thread
    How to send XML file into XI using sender HTTP adapter

  • Http adapter at sender side for synchronous interface

    Hi SapAll.
    here for one synchronous interface we using http adapter at sender side.
    i just want to know on how i can get the sender ip adress or url through which they sending the data.
    will be waiting for best asnwer.
    regards.
    Varma

    Http adapter at sender side for synchronous interface
    i cont see any messages in xi producction.
    Is LOGGING_SYNC enabled for your production box....also is the problem just about the visibility of the messages or is your scenario itself not getting executed?
    At least the sender application might have received some error response if posting message to XI was a failure....also if possible check the message monitoring in RWB if you feel an error has occured.
    Regards,
    Abhishek.

  • How to pass the SIN using a plain http adapter in sender side.

    Hi all,
       How to pass the SIN(System Identification Number) using a plain http adapter in sender side.
    Regards,
    Venu.

    You can set it in a specific HTTP header (as explained here : http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm) ...
    Rgds
    Chris

  • HTTP protocol in Sender side

    Dear SDN Experts,
                            May i know can we use HTTP adapter in Sender Side  of integration.

    Hai,
    Ya  you can use HTTP adapter in senderside integration.
    The Event Sender is a component that is part of the integration technology; it checks
    the queue from time to time to get new Business One events and sends an HTTP
    request with the event to the integration server. The user can set the time interval to
    check the queue of the event sender. In our case, the event sender will detect a
    newly added message, i.e. the purchase order, then wrap the sales order information
    in an HTTP request and send it to the HTTP adapter of the SAP Business One
    Integration Technology.
    Check this link
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/52b12740-0901-0010-4097-b85d1f5aee2a
    regards
    Nissy
    If this is helpful reward me some points.

  • Can i use combination peoplesoft system  and http adapter on sender side

    hai
    can i use combination peoplesoft system  and http adapter on sender side
    is their any modifications i have to do on module tab
    can any body tell me how to post data to http adapter
    is there any application gui is there to post data

    Hi
    can i use combination peoplesoft system and http adapter on sender side
    >>>Can you explain further what this means.. You can use HTTP adapter on the sender side.
    is their any modifications i have to do on module tab
    >>> No module processor allowed for HTTP adapter.
    can any body tell me how to post data to http adapter
    is there any application gui is there to post data
    >>> Check this document. It gives you information on how to build HTTP based web GUI.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
    Thanks
    Satish

  • Why can I not resize Finder windows by grabbing any side or corner

    I love my Macs and Leopard having used PCs for 15 years. But one annoyance of the Mac OS is the inability to resize a window by grabbing any side or corner like I can do in MS Windows.
    Being able to resize a Mac OS window by having to grab the lower right corner is a very limiting especially when I have a number of windows open at one time. I would think with all of Apple's sophistication that this would be a simple convenience to add.
    Are there any utilities out that that add this functionality to Leopard?
    Thanks for sharing in advance.
    Bud James

    nerowolfe wrote:
    {quote:title=SC::UK wrote:}{quote}
    He said he'd been using PCs, not Macs, for 15 years. I also find it annoying that I cannot resize from any corner or side, and that the maximise button on each window seems to do something totally random.
    When you change from one OS to another, do you really expect them to be the same? Then why change? It's like changing from a LH drive car to a RH drive car. It takes a few minutes and that's it.
    Different OSs are different otherwise they would be the same.
    You don't have a powerful Unix system lying under a Windows GUI and you don't need anti-virus software or have to defrag every day or so. And you do not need to reinstall every month or so or ever get caught in DLL-heck.
    Yes Macs are different from Windows machines. I regularly use both and have no problems with either. Whether the gearshift and rearview mirror are on the right or left does not matter to me. I like either.
    I'm not sure what disk fragmentation, reinstallation or DLL-**** (never heard of DLL-heck) have to do with the OPs question and observation about being able to drag any corner when you have a screen full of windows. Sounds to me like an attack in desparate defence of OS X instead of constructive discussion.
    I also regularly use both, professionally, but there are things that Windows does better than OS X, and there is no reason why OS X could not improve. For example, why can I not selectively remove (i.e. completely destroy) files from my trash?

  • Why am I not getting the audio when I send a video from Premier Pro to encor to make a DVD?

    I created a video with only one audio track.  It plays perfectly in Premier Pro
    Then I send it to encor to make a DVD.  When I play the video in the monitor in encor, there is not sound, audio track
    What am I doing wrong.  I have done this successfully many times before

    To further add to the equation if I go to System Preferences and switch my output from my MOTU Firewire to the internal speakers of my Mac Pro I can hear the clip I just dragged and couldn't hear before in the Timeline AND when I then switch back to the MOTU I can now hear that same clip I just dragged in the Timeline.  But if I drag a new clip from Events to Timeline then I cannot hear it again until I go through this same song and dance.
    Help?
    Weird... It appears that there is a problem with the audio not being routed to the right output.
    I don't have a MOTU interface, but could it be that there is an updated driver for it?
    Also, I'd try to let OnyX run its cleaning and maintenance routines.
    If all else fails, at least you can shorten the workaround: you don't need to go to system preferences to change the output for sound. Just option-click on the volume icon in the menu bar and select the desired choice.

  • Why am I not getting email from one particular sender? .

    Hi all,
    Hope you can help because I am stumped. A few days after installing Mountain Lion (not that I think that necessarily has anything to do with it), I stopped receiving email from a particular sender. The email from this person is very important, so I've been trying to figure out what's going on. He is in my Contact list. I have received email from his successfully for months. We did some testing yesterday. I think the email is coming in, then being deleted immediately. I hear a little ding in the background when he sends me something, but it doesn't make it into any of my inboxes.
    I have temporarily disabled junk mail filtering. I also can't find a setting that indicates to delete anything automatically. I am at a loss.
    Any ideas?
    Thanks so much!
    Sharon

    Go to Mail Preferences, and click the "Rules" icon. Make sure there are no rules that move these messages to another folder (you can just uncheck the rules to deactivate them).
    Also try searching for the sender's email address to see if it turns up - be sure to click "All" in the mailbox row after typing his address in the search box.
    And depending on what email service you use, you may want to check to make sure there are no "rules" or "filters" in the web site - for instance if you use gmail, you can set up filters in gmail that "archive" a message before Apple mail ever sees it - the mail is still there, you just wouldn't see it in your inbox. The only way to fix it is to log in through the gmail web site.
    Another possibility is that you accidentally turned on "threaded" mail view, which is extremely confusing if you don't expect it. Instead of grouping by date, the messages will be grouped by subject line - and if the person sending this message is replying to an old message of yours, it will continually group those new messages together with the old ones. Click the "View" menu, and check to see if the "Organize by conversations" option is turned on or off. Or maybe it's even simpler - maybe your mail is no longer sorted by date - what does it say at the top of the list of messages?
    Of course there's alwys the possibility that he has the wrong email address in his contacts, so keeps sending to the wrong address over and over again. He should try manually typing your full email address, and not accepting the "autofilled" suggestion.

  • Reg:http adapter-sender side

    which http client tool is used to send the request if we are using http adapter on sender side?

    Hi Chandra,
    HTTP: Hyper Text Transfer Protocol is a stateless prtocol to send a request and get a response back on that. For your query is there any specific client used?
    Ans: No, you can use any client means the ip address of the system from which you are making request called client and to which you are making request called server. http is nothing but some set of rules to exchange data between two systems.
    One more thing to mention is "some jave code is written for http and that is register on W3C" so that different server can connect to each other using it.
    See the link below:
    http://www.w3.org/Protocols/
    Please always Rewards if helpful.
    BR,
    Alok
    Edited by: Alok Sharma on Mar 18, 2008 12:49 PM

  • Why we r not Creating Sender Agreement For HTTP & IDOc Adapter at Sender .

    Hi Buddy's,
                         Why we r not Creating Sender Agreement For HTTP & IDOc Adapter at Sender .And why we create receiver agreements at receiver side bt not sender agreement at sender side.
    Wat Is GLOBAL Container ?, where it will Occur & wat is the functionality of that.

    Kumar,
    1) XI integrattion server - IS expects the messages in XML format. If you see the HTTP request you will see that we pass all the info contained in the Sender areement in the the HTTP request itself , namely - Message interface, message type and the namespace (along with login parameters). For IDOCs the the IDOC- XML are are sent to the IS (through IDOC port configuration at the source system.
    2) When send a message to XI the sender knows that XI system parameters, but when at the reciver end there could be any any system that is reciving the IDOc/HTTTp message. you specify those message through a commumication channel and this channel is associated to a receiver agreement.
    3) A Global container is like a place holder for variables. You can set a variable here and access it throughout your mapping and hence the name.
    A good example for a gloabal container is a counter to countthe number of records in te target side.
    Regards,
    Arvind ravindran

  • IDOC Scenario: System not configured as XI integarton engine

    Hello Experts,
    I have beeen trying to solve this since a few days.
    I have created an IDOC scenario  from SAP ECC s/m to PI 7.0.
    The IDOC is being sent successfully fron SAPECC with status 03 in Transaction WE05.
    But in PI 7.0 I am not able to view these messages anywhere in WE05.
    SXMB_MONI of PI 7.0 shows an error record for previous trials and shows error status (red) as "System not configured as XI integration engine"
    I have already set configuration parameters on PI7.0 in SXMB_adm.
    Your suggestions will be appreciated.
    Thanks in advance,
    Elizabeth.

    Hi,
    you can check in PI:
    - TCODE - SXMB_ADM
    - integration server
    - edit - change global config - check if you have: integration server set
    Regards,
    Divya

  • Business service is not working in sender side but business system is working soap to idoc but why like that

    i have  scenario SOAP to IDOC
    when i'm using business service in sender side it is getting an error as follows
    sender message can not convert to ALE Logical system
    in this i'm using altova spy as testing tool
    my sender interface is asynchronous
    but when i'm using business system everything is working fine
    In sender side i'm using soap adapter,i checked the logical system everything is fine
    mainly the problem is why it is working when i'm using business system rather than business service
    my pi version is pi 7.0
    thanks in advance
    regards
    satish

    Hi Satish,
    You are sending IDOC's to SAP system right. we should create Business system not business service.
    so we should create the business system as web AS ABAP in SLD and import the same in ID.
    When we create the business system in SLD the logical system name is assigned for the business system. like SAPCLNT100...It plays a key role in IDOC scenarios.
    sender message can not convert to ALE Logical system
    Reasons for this issue is
    1) logical system name is unable to read from SLD for that corresponding business system.
    Goto business system click on Adapter specific identifiers from the menu --> read from SLD.
    it will automatically fetch the logical system name from the SLD.
    2) Sometimes the logical system name will be deleted from the business system in SLD.
    Delete the business system and re-create it, and follow the above procedure.it will resolve your issue.
    Regards
    Bhargava Krishna

  • Configuring IDOC and RFC Adapters in both Sender and receiver side

    Hi ,
    Kindly tell me the steps to configure IDOC adapters in sender as well as receiver side.
    Similarly for RFC adapters.
    Regards,
    Sweta

    Hi,
    >>>Kindly tell me the steps to configure IDOC adapters in sender as well as receiver side.
    kindly try searching for them first yourself (there are tons of docs for that and similar questions)
    and come back if you any further issues
    Thank you,
    Regards,
    Michal Krawczyk

Maybe you are looking for