Why V1 (input tax) apply to PO but not A1

Hi friends,
I am creating PO under a UK company code. to my understanding, I should input A1(output tax code) since this is liability. However, system forced me to input V1(input tax). Why? while I realized A1 has been applied to customer invoice.
isn't GR tax is input tax and liabilty a output tax?
Please help to understand.
Thanks,
Linda

hi
PO is the document for paying tax so u have to maintain the input tax and not output
for input material input tax for output material output tax
regards
kunal

Similar Messages

I am creating input tax code in FTXP,BUT i am not getting tax code whil

Dear EXpert,
I am creating input tax code in FTXP,BUT i am not getting tax code while doing PO? what is the reason?
thanks& Regards,
saran.

Hi Saravana
Please make sure you have done all the following settings in SPRO.
SPRO>Basic Settings->Taxes->
1)Define Tax determination rule
2)define regional codes
3)Assign Delivering Plants For Tax Determination
4)Define Tax Relevancy Of Master Records
5)Maintain Sales Tax Identification Number Determination
regards
Yogesh

Why apple lie people iphone 4s arrived but not in stock...?

why apple lie people iphone 4s arrived but not in stock...?

Contact 3 asap you may have been frozen because of inadvertant excessive
data use or more.
All you can eat does NOT apply overseas
AND if you did not enable roaming they will certainly believe your iPhone has been stolen
and taken out of the country

HT1364 why will my ipad2 connect to itunes but not my iphone 4s

why will my ipad2 connect to itunes but not my iphone 4s

why will my ipad2 connect to itunes but not my iphone 4s

E Recruitment -Candidate applied for job but not reflected candidate name

E Recruitment
Candidate applied for job but not reflected candidate name Recruiter Dashboard
Please any one suggests me what is problem?
Regards
Eshwar

Hello Sri,
the solution to your first question might be very easy. In EhP 4 the entries in the dashboard do not appear automatically. In most cases you have to refresh the dashboard (be aware this is only effecting the current dashboard work list, not all if you do not use the refresh all button). Soclick the "My new Applications" and then refress this workset.
If this does not help we will have to look closer into this issue (overall I assume you have EhP4 SP 6 applied).
For question 2. It is a quite common requirement that an external publication is nearly only based on the posting texts while the internal publication includes much more specific information (org. management, cost center, pay scale group). As you are free in designing you own company specific internal and external publications they can look however you want (in the general restriction what a smartform can do of course). For different publication texts companies create different postings one for internal and one for external publication. The additional information are in some cases entered directly into these texts, in some cases maintained in e-rec fields not needed for other requirements, in customer own fields or directly gathered from the HR core system. It depends a bit on the exact requirement which is the best solution. For the fields you mentioned I'd probably go for OM integration for e-rec (assigning positions to requisition) and get the Information via customer RFC function module directly in the smartform (if the security guys allow the access to the HR system from the e-rec system).
For question 3. The manager should be able to see the decision maker data overview. Here you can include whatever you want as you can replace it with a customer developed smartform.
Kind Regards
Roman

Why are some photos on camera roll but not in photo stream. Unable to backup as camera roll size is too big for free 5gb.

Why are some photos on camera roll but not in photo stream. Unable to backup as camera roll size is too big for free 5gb.

I assume you have Photostream on, correct?
In order for the photos to be moved into Photostream, you must exit the camera app, and be on a wifi connection. Both of these criteria must be met before the sync occurs.

Why is visual voicemail free for iPhone but not for other phones?

I recently activated an iPhone on my line -- temporarily -- and found that visual voicemail was included and didn't cost a dime. Can anyone explain why visual voicemail is free for iPhones but if you want it for any other phone it bears a monthly charge?

Also VVM is also free for everyone. The $2.99 is for the premium version. You can search the FAQ and there's a pricing list and shows what you get.

Audio input volume in System Preferences, but not Mainstage

Hi,
I am trying to get Mainstage 2 to work with an audio interface (TASCAM US-122 MKII). I've installed the drivers for the interface, and it shows up on my system both in System Preferences under Audio and in Mainstage. When I go to system preferences -> Audio and play an instrument through the interface, volume registers on the level meter. But if I go to Mainstage and select this interface as my input, I get no volume levels registering at the input.
I've been trying to get this to work for going on six hours now, googling and installing and restarting to no avail. I have the same problem with Garageband too. Has anyone had this happen to them, that an audio interface seems to be recognized by the operating system but not by Mainstage/Garageband?
Thanks,
- Nick

I can't help, other than to say this happened to me today with the same hardware, only with GarageBand.
I recorded bass tracks this morning -- no problem. This afternoon, though, every time I plugged in the Tascam GarageBand went silent, even though the system input shows sound coming in.

Why does windows have 64-bit iTunes but not mac?

I can't believe it. I searched the archives here and someone said because most people don't have 64-bit compatible machines. Then why does Windows get separate versions but not the native OS?
I'm running audio hardware optimized for 64-bit (drivers) but the sound quality of iTunes is worse in 64-bit than in 32-bit.
Anyone have any knowledge when 64-bit is going to be released?

iTunes is only 32 bit for Windows OS and Mac OS.
The 64bit version for Windows simply includes 64 bit drivers. The application itself is only 32 bit.

Why OSX Lion supports Lao, Khmer, Myanmar, but not Thai???

Quoted from the Apple's OSX Lion - over 250 new features - web,
" Expanded language support
Twenty new font families for document and web display of text provide support for the most common languages in the Indian subcontinent, including Bengali, Kannada, Malayalam, Oriya, Sinhala and Telugu. Devanagari, Gujarati, Gurmukhi, Urdu and Tamil have been expanded. And three new font families support Lao, Khmer and Myanmar. "
Lao, Khmer, and Myanmar, but not Thai?? Come on, seriously, you guys in Cupertino... No offense but Macs are sold more in Bangkok alone than those three countries combined ! not to mention iPhones, iPads, and lots of apps from App Store! Normally we've been getting along with English-based version, but now don't cram those three while leaving out Thai. Please don't let everyone here start thinking about discrimination agains one nation (it's pretty clear if you look on the map). Please, seriously consider adding another one, even as a patch.
Thanks.

Chatchalee wrote:
Thai support so far has limited extents; namely word-wrap particularly in Pages, grammatically checking, etc.
I don't remember seeing any complaints about Thai word breaking in these forums before. OS X does include a special dictionary to try to regulate that. See this note:
http://support.apple.com/kb/HT1180
I suggest you send Apple feedback with details about improvements you would like to see in that:
http://www.apple.com/feedback/macosx.html
Does Office for Mac have a word-breaking dictionary for Thai? My impression is No. I think it is mainly for that reason that Office for Mac does not even include Thai on the list of input languages it officially supports, which is listed in the Help for that app.

Why is my library available in windows but not in MAC

Why am I not able to share my ipod library from my Windows formatted computer to my Mac? My library shows up in my Gateway system but not in Mac. where's my music?

I would also like to know why Verizon does not carry WPXJ 51 (ION Television) from Batavia for all WNY customers? All other cable and satelite providers carry the channel. The only explanation I can think of is that for some strange, bizarre reason Verizon thinks that WPXJ is local to Batavia and is OUTSIDE the Buffalo and WNY viewing area. However, this is absolutely FALSE because it does not require anymore than a standard digital over the air antenna to bring WPXJ in and receive channels 51.1, 51.2, 51.3, 51.4, 51.5, 51.6 in crystal clear HD picture and sound. Though, I would still greatly like to be able to watch ION Television (WPXJ 51.1) on Verizon FiOS though.
C'mon Verizon, get real and wise up- Batavia is NOT outside the local WNY viewing area and should be covered inside WNY. Are there any other more closer ION afiliates for Buffalo? No, because anyone with an OTA can get WPXJ from Batavia.
ION says it should be carried on channel 21, and hopefully then 521 for HD. So, Verizon- WHERE IS THE CHANNEL? There is currently NOTHING on these channels. ION says we should find their channel here, but we don't. Do we need to get ION to contact you about it or will you just get smart and add it on your own soon?
Now would be the best time to get ION for their original holiday movies. Please add it very soon. Thank you!

Why does Mail open in guest account but not my account since upgrade to Mavericks?

I've read a lot of threads but not found anything that works for me. The history is this:
I've upgraded to Mavericks 10.9.2. Since then, Mail won't open in my own user account. I only get a very brief error message:
Process:
Mail [1448]
Path:
/Applications/Mail.app/Contents/MacOS/Mail
Identifier:
com.apple.mail
Version:
7.2 (1874)
Build Info:
Mail-1874000000000000~1
Code Type:
X86-64 (Native)
Parent Process: launchd [157]
Responsible:
Mail [1448]
User ID:
I have gone to user/Library/Mail and deleted the contents of the folder Mailboxes + all the other mailboxes. No change - Mail still won't open.
If I switch user accounts to guest user, Mail opens normally (sets up email accounts etc).
Any advice would be much appreciated.

Rebooted in safe mode, repaired disc permissions, rebooted (again in safe mode) but no difference.
There was a bit more detail I could / should have added.
1) Before it crashes, Mail says it is Upgrading your Mail database.
2) I downloaded Mail update but Installer said none of the drives were compatible. (Anyway Mail works fine in Guest Account)
3) I've been through all the tips on this post https://discussions.apple.com/message/23490745#23490745http://
and
looked at Internet accounts in Preferences and none of my email accounts is checked with Mail. It asks for a password for each one but when I provide it I get the message Unable to verify account name or password. And if I try and uncheck iCloud with Mail I get the message that I need to do that from within Mail. (Obviously not possible until I can open Mail).
In Terminal tried defaults delete com.apple.mail ColorQuoterColorList but got the message that it hadn't been done.
Tried to find Envelope.x.x files as per this fix:     Final solution: Go into ~Library/Mail/V2/Mailboxes > Delete all mailboxes. Then go to ~Library/Mail/V2/Maildata and delete 3 or more "Envelope.x.x" files > Restart Mail, and enjoy your success.     but don't have a V2 folder nor Envelope.x.x files. I do have Envelope Index file and Envelope Index - journal
I don't suspect 3rd party applications because I think they are all available in the Guest Account aren't they?
Many thanks for your reply though. Any more ideas?

Why does the counter work in MAX, but not Labview?

Please help, I have been away from Labview for over 3 months, and I am quite rusty....
Last year, I successfully configured NI9401 to measure period (seconds) by counting the rising edges of my sensor signal. Since then, I have aquired a new PC, and loaded all my software into it, including the Labview VI's that successfully worked on the old computer.
I can see the digital signal using MAX and the test panel for the NI9401, so, I know my wiring and my TTL signal is OK, but, when I try to run the attached VI, nothing happens except the error below.. How do I tell this VI to look for the signal on MOD3/CTR0 and channel 14?
Thanks. I am sure it is a small adjustment...this worked fine a few months ago...not sure what is wrong now.
Thanks,
Dave
Solved!
Go to Solution.
Attachments:
continuously measure period buffered_singlechannel_forum_feb_23_2012.vi ‏20 KB

OK, now. Resolved the issue. The vi is fine, but, some shaky wires were identified...worked in MAX but not in the vi. Now that the connections have been tightened up, it works for both. Sorry for the inconvenience.
Dave

Why will DVD play on one player but not another??

Hi,
I made an ISO file using devede and then burnt it to a DVD using K3B. The finished DVD will work on a Magnavox player but not a JVC. Is there anything I can do about this??? Do some players have a "must be produced commercially" filter or something???
Jim
Last edited by MillTek (2008-04-20 20:45:12)

First, I am assuming you recorded your iso on +R type media. Next, I'm guessing that the player that won't play your DVD is the older of the two players. Some DVD players, especially older ones don't like +R media. If this is the case, here is a possible fix.
Here is a thread on another forum which discuses changing the booktype on your DVD burner. Here is a quote from the original post:
There have been many questions asked about how to booktype +R media to DVD-ROM
Many standalone Players, HDD recorders/players and games consoles don't like +R media but they are happy enough to play -R or DVD-ROM.
Some drive brands have tools to change this option but others don't. I have found that the easiest way to change your BOOKTYPE setting is to use a small burning tool called IMGBurn which can be found doing a Google search.
Below you can see some screen shots which guide you through changing your BOOKTYPE setting. For this I have used my NEC4551 but IMGBurn supports NU-Tech, Plextor, Ricoh, Samsung, BenQ, LG, Lite-on and NEC.
Once you have changed your BOOKTYPE setting, when you burn a +R/+RW disc it will be burned as a DVD-ROM which is the same as a bought movie and most players are happy to play these.
Since my DVD players are happy with +R media, I haven't tried this. Both of my players are fairly new, and I made sure that +R was listed on the box as one of the formats accepted by that player.
As usual, try this at your own risk.
Pudge

Why are my USB ports are working, but not providing power?

I just got a brand new 15" Macbook Pro and the USB ports appear to be working fine for items that don't require power, but I plugged my Avid Mbox into it and the power light on the Mbox flashes, indicating it is not getting enough power. The Mbox works fine on my other Macbook Pro (2010 model) and it works on my Imac, but not the new Macbook. I have a powered hard drive that works fine on the new Macbook, so the USB port is not dead, but just seems to not be supplying power properly for this device that needs it. I don't have another item which uses the power like this to test, but I wonder if anyone has any idea if this is simply faulty hardware and if there is a conclusive way to test. As it's literally two days old, I would exchange it if it really isn't working properly. Only difference between this new Mac and the others is that it's running Lion and the others are running Snow Leopard.

If you have an iPhone or iPod that can be charged by the USB port, then the problem lies with the Mbox and/or the cable attaching it. If you google the problem (and I hope you did, because there are tons of posts at the various Mac websites about troubles with the Mbox and the MacBook Pro), you'll see people either plug and play with no issues, or they spend a lot of time doing so. It sounds like you're the latter.
Anyways, if an iPhone or iPod (or anything else that requires USB power to run) doesn't work, then the issue is your MBP.

Why V1 (input tax) apply to PO but not A1

Similar Messages

Maybe you are looking for