Why wayland? from a users view
Hello
So far I have understood that wayland will replace x.org server as rendering protocol. I have understood that from a developers point of view, it is much simpler to maintain and relate to as an developer of the applications that speaks directly to the rendering protocol etc.... BUT....
What advantages does it present for the end user?
Last edited by Roberth (2013-10-19 23:02:21)
Wayland isn't for the end user. End users aren't going to drive the switch; it's not like upgrading to Windows 8 -- you don't have to sell the product to end users who are buying it. The buyers are the developers who maintain distributions and write software. The fact that end users will get it too is a side effect.
Few end users care about Xorg. They care about applications like Facebook, Netflix, Steam, Minecraft, Skype, etc. but not about Mono, Flash, Java or any of those other technologies; they'll upgrade when the developers force them to.
I use my computer mostly for browsing the Web and the occasional game. Weston+X is too much hassle for me; that's why I use Arch to begin with -- it frees me to focus on stuff I do care about. But I look forward to using it when it matures a bit.
Last edited by Trent (2013-10-20 11:52:01)
Similar Messages
-
How to remove tasks from a users view
Hi,
I have the following scenario where two tasks feed into an OR then onto another
task. All these tasks are executed by the same user.
Stage 1:
Task 1 and Task 2 shown on the task list
Stage 2:
Execute Task 1
Stage 3:
Task 2 and Task 3 shown on the task list
Stage 4:
Execute Task 3
Stage 5:
Task list empty
Now I would have expected at Stage 3 to have only seen Task 3 in the list as Task
2 is no longer permissible/required.
Is this possible from the Studio?
Any advice appreciated
Paul ClementsHi,
Maintenance view will be created for database tables only.
Just display the maintainence from SE11 and click Tables tab in the screen
Here you can find the list of tables used to created for Maintainence view.
YOu can use these tables to write SELECT.
If you give us the maintainence table, we will help you.
Thanks,
Ramakrishna -
Hi All,
Can anyone tell me how I can retrieve the LDAP groups from a User View? When I retrieve a user View I don't see where the LDAP groups are located on the View. Is there an attribute I'm missing or is there an alternative mechanism to retrieve the LDAP groups from a User view?In the user view, you will have to customize the user view form per documentation. Add a multi-select field if editing, or a list/text area using the ldapGroups from the resource. You can find more on ldapGroups in the documentation for resource adapters. Sample code also helps.
-
User View is not reflecting the source data - Transparent Partition
We have a transparent partition cubes. We recently added New fiscal year details to the cube (user view as well as source data cube). We loaded the data to the source data cube. From the user view, we tried to retrieve data, it shows up 0's. but the data is availble in the source data cube. Could anyone please provide the information what might be the issue?
Thanks!Hi-
If u haven't add the new member in the partition area, then Madhvaneni's advice is the one u should do. Because, if u haven't add the member, the target can't read the source.
If u have already added the new member in the partition area, and still the data won't show up, sometimes it's worth to try re-save the partition, and see what's the outcome.
-Will -
I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it?
Here's an easy way:
Pick the user that you want to eliminate (making sure that the remaining user has administrator privileges) and move all of the data that you want to keep into the Shared folder. Reboot or log out and login to the user you want to keep. Copy all the data from the Shared folder into your account - placing it neatly in folders (Documents, Music, Movies, etc.).
Once the data is moved, log into the account you want to delete just once more to make certain that you've grabbed all the data you want to keep. Log out and log back into your admin account and go to System Preferences>Users & Groups and delete the 'old' user.
That should do it.
Clinton -
Prvent from the user deleting specific line in view table
HI,
In our Project we have a View Table which user can maintain ,
the user can change or delete the line (and fields) in this table.
what i want is for one line for specific combination in the table to prevent from the user to delete this line ,
so when he push on change mode and mark the line and push on delete i want to give him a error message that he can't delete this line (because the specific combination ).
i new for the concept of the PBO PAI....
so i appreciate any help or suggestions.
Best regards
Micheal A[Table maintenance Events|http://www.google.com/url?sa=t&source=web&ct=res&cd=4&url=https%3A%2F%2Fwww.sdn.sap.com%2Firj%2Fservlet%2Fprt%2Fportal%2Fprtroot%2Fcom.sap.km.cm.docs%2Flibrary%2Fabap%2FHow%2520to%2520implement%2520Events%2520in%2520Table%2520Maintenance.doc&ei=txFUSdKHKISeNbG1_dQP&usg=AFQjCNF3AI-77PC-MS20vx-ARd4a6zxUfg&sig2=Y_IWbHOsETvyoIrFzPxpCg]
[SAP help|http://help.sap.com/saphelp_erp2005vp/helpdata/en/91/ca9f0ea9d111d1a5690000e82deaaa/content.htm] -
Need access to the user view from a form
How can I get access (only need read access) to the user view from inside a form, in this case, the Question Login Form?
This is mentioned in the forum somewhere:
<invoke name='getView'>
<ref>:display.session</ref>
<concat>
<s>User:</s>
<ref>accountId</ref>
</concat>
<map>
<s>authorized</s>
<s>true</s>
</map>
</invoke>
regards,
Manish Gurnani -
I Would Like To Access And Add To My Library. I Am Logging On To My Account From Multiple Users On A Computer And Am Not Able To View My Complete Library When I Change Users.
tHE lIBRARY iS iN yOUR uSER aCOUNT.
-
Responce times from end-user point of view
Hi,
I am looking for the way how to collect responce times from end-user point of view.
Logging of function execution via DMS is not enogh thus we need to discover and monitor problems in all components including poor network, users terminals etc.
Regards,
TomaszHi,
I am looking for the way how to collect responce times from end-user point of view.
Logging of function execution via DMS is not enogh thus we need to discover and monitor problems in all components including poor network, users terminals etc.
Regards,
Tomasz -
I'm a new Mac user and am finding my way slowly around it. One question: why is a new user account created every time I upload files from my old PC?
Because you're using the Migration Assistant, and it can't migrate data to an existing user account. Transfer everything at once or use a different method.
(111200) -
See many user complaints re: OS X Mavericks. Why change from OS X 10.8.5?
Reasons to upgrade:
Mavericks is flawless on my mac.
Mavericks seems faster than 10.8.
iBooks
iCloud keychain (big plus: my passwords now sync between OSX and iOS).
There are a few things to be aware of before you install it, though:
Any new OS has some bugs and incompatibilities with old software and hardware. If you are uncomfortable with basic Mac troubleshooting, then perhaps waiting would be a better strategy. However, I didn't have any software issues with installation or after.
If you have any mission-critical software or peripherals, make sure they are compatible first.
Mavericks does not play well with some old/bad software:
Crapware: anything that purports to "clean", "monitor", "protect", or "accelerate" your mac. Unnecessary on Macs and often harmful. Examples: CleanMyMac and MacKeeper (the King of Crapware).
antivirus software. Of dubious benefit on Macs.
"haxies": apps that change the appearance of the GUI.
The vast majority of disgruntled Mavericks-haters that post on this forum have crapware and antivirus software and other dreck on their macs that they are very reluctant to part with.
Mavericks does not play well with WD hard drives: this is because the software that comes on the drives, and the software that comes with the drives that WD wants you to install on your mac, and in some cases the firmware that is built into the enclosure of the external drive, are all incompatible with Mavericks. None of the software is necessary. If you have a WD drive, you should:
reformat (erase) it before you use it with a Mac
if you have installed WD software on your Mac, uninstall it. It's unnecessary anyway.
research it on line to see if it has the incompatible firmware on it. If it does, and you just bought it, I'd return it.
Before you install Mavericks, it's a good idea to:
have a good backup, like with Time Machine
make sure you have enough RAM. The specs say 2GB, but 4 is probably a more realistic minimum. If you do memory intensive work, you'll want more.
uninstall Crapware. This can be a problem because one of the hallmarks of crapware is that there is usually no uninstaller. It can also damage your OS and be difficult to uninstall completely. You may have to reformat (erase) your HD and do a clean install to completely get rid of it.
uninstall antivirus software and haxies.
repair your hard drive and permissions with Disk Utility
boot into safe mode, and then run the installer Mac OS X: What is Safe Boot, Safe Mode? -
How to hide ribbon from all item view for particular user group
hi friends
how to hide ribbon from all item view of particular list for specific user group.
using OOB functionality or javascript.Hello,
Use this codeplex tool to hide ribbon to user group:
http://spribbonvisibility.codeplex.com/
If you don't want to use above tool then you have to add SPSecuritytrimming in "Rajiv Kumar" code for filtering based on user group permission.
http://www.topsharepoint.com/hide-the-ribbon-from-anonymous-users
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
All Data not getting viewed from one user
Hello,
I have created a user named "ABC" in SAP and have given full authorization to that user.
But while logging through that user and viewing the Sales Order all data are not viewed through the form as i haven't
defined Data Ownership for that user but still i am not able to view all data from that user login.
Please suggest what i have to do view all data from that login.
Thanks & Regards,
AmitHello Amit,
Data ownership authorization would not be override by general authorization. If this user has not been assigned for data ownership authorization, the sales order may not be available to the user.
Thanks,
Gordon -
Viewing errors resulting from automated user replication
hi guys
pls tel me how to view errors resulting from automated user replication
regards
kamalDoes it not appear in default trace?
-
Why can't apple user share or take data from Andriod?
1.why can't apple user share or take data from Andriod?
I was able to easily move all my data from my Android phone to my iPhone when I switched. But, that could be, because, instead of complaining, I actually asked questions that made sense, listened to the answers, did some reading and figured it out.
Maybe you are looking for
-
Is there a way to BULK COLLECT with FOR UPDATE and not lock ALL the rows?
Currently, we fetch a cursor on a few million rows using BULK COLLECT. In a FORALL loop, we update the rows. What is happening now, is that we run this procedure at the same time, and there is another session running a MERGE statement on the same tab
-
How can I see a list of contacts on my PC?
My step-son recently used the USB port on my PC to recharge his iPhone. Apparently it also synched because he now has my contacts on his iPhone. I DO NOT want his 350+ contacts on my iPhone. How can I see a list of what contacts would be loaded onto
-
after running mac tuneup got a red dot on the hard drive icon, nothing would respond, now on restart cant get past white screen with apple logo, mac tune up disk still in laptop
-
Can i search data in Numbers app?
Can i search data in Numbers app for iPad like i do with an excel spreadsheet (ctrl+F)? Or i have to look though the whole spredsheet to find what i am looking for?
-
How do i get my itunes videos to play correctly
i updated my itunes to 10.7 and now when i try to watch shows i downloaded from itunes they will play for a little while then the video will freeze and the sound will cut out and several seconds later it will start playing from the point in the video