Why we have setup tables in LO extraction and why not in CO-PA,Generic,FI-S

HI Friends
                Why we have setup tables in LO extraction and why not in CO-PA,Generic,FI-SL. Please clarify.
Thanks&Regards
Revathi
<removed by moderator>
Edited by: Siegfried Szameitat on Nov 13, 2008 12:07 PM

Hi revathi,
The R/3 database structure for accounting is much more easier than the Logistical structure.
Once you post in a ledger that is done. You can correct, but that give just another posting.
BI can get information direct out of this (relatively) simple database structure.
In LO, you can have an order with multiple deliveries to more than one delivery addresses. And the payer can also be different.
When 1 item (orderline) changes, this can have its reflection on order, supply, delivery, invoice, etc.
Therefore a special record structure is build for Logistical reports.and this structure now is used for BI.
In order to have this special structre filled with your starting position, you must run a set-up. from that moment on R/3 will keep filling this LO-database.
If you wouldn't run the setup. BI would start with data from the moment you start the filling of LO (with the logistica cocpit)
I hope I have been clear.
Udo

Similar Messages

  • Why we have setup tables in LO extraction and why not in CO-PA,Generic

    Hi Friends
                   Why we have setup tables in LO extraction and why not in CO-PA,Generic
    Please give me reply
                                       ****************Points are assured********************
    Thanks&Regards
    Revathi

    Hi Revathi,
    Please check the following Threads :
    [why set up tables ?;
    [Why LO only having Setup tables not Others.......?;
    Regards
    Hemant Khemani

  • Why to use setup tables in LO extraction

    Hi gurus
    please send me answer

    Hi,
    Think of the SAP application tables as Production system. Now why dont we directly do reporting on these tables or why cant we use these tables instead of ODS as these already have detailed data.
    One of the major reasons is performance. If you want to load this data to BW directly with out setup tables, you cannot be sure that you have correct data in the BW system as these tables are changed by the transactions. If you still do not want to use setup tables, you should stop any changes to the tables, which is impossible (will impact the business).
    I believe this is why SAP does not allow direct access to application tables and has brought in the concept of setup tables. The setup tables hold the data for us to transfer and any changes in the data records is moved to the delta queue.
    Please correct me if I am wrong.
    Hope this helps!
    Regards,
    Maddy

  • What is the use of setup tables in LO extraction

    Hi Friends,
    What is the use of setup tables in LO extraction, what is the functionality of setup tables
    Thanks in advance

    hi,
    to prepare data to be extracted to bw,
    more details take a look Roberto's weblog
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    hope this helps.

  • Why i have to specify the parameters (property and name) in both tags?

    Recently i learned how to populate a html:select with data from a DB table with a int value and a String value (value and label of an option). For that i create a business object that represent one pair value&label (i called categoryBO) and another business object that contains a list of the business objects categoryBO. So in my JSP i have the next code:
    <html:select name="lista" property="listaPropiedades">
    <html:optionsCollection name="lista" property="listaPropiedades" value="varValor" label="varLabel" />
    </html:select> Well i understand the next: name is the name of the business object that contains the list with the objects that represents the options in the select tag; property is the name of the list object, in the business object i need to have the getters and setters for that list; then value is the name of the variable that contains the data that will be the value of each option and label is the name of the variable that contains the data that will be the value of each label.
    But i have the next questions:
    1. Why i have to establish the parameters property and name for bot html:select and html:optionsCollection? Why not only in html:select or only html:optionsCollection?
    2. In the ActionForm for my JSP i don�t know what data type have to use to declare the variable that's linked with the option or with the select. I'm using Object for now.
    3. Why the only way to populate the html:optionsCollection in the Action is passing the object in the request object as an atribute in the next way:
    request.setAttribute("lista", objectThatContainsList);instead
    ((ActionForm)form).setListaPropiedades(objectThatContainsList);why's that? I have the same question when i'm populatina a normal html table using a logic:iterate tag or using a display:table tag from displaytag library.

    Ok, you have one big misconception here - you're using the same name/property for both the select component and its contents.
    The html:select should refer you to ONE selected value (in this case an int). It should tie to a field on your action form.
    The html:optionsCollection should refer to a list of beans used to populate this select component.
    <html:select property="selectedItem">
    <html:optionsCollection name="myList" property="listOfProperties" value="varValor" label="varLabel" />
    </html:select>
    1. Why i have to establish the parameters property and name for bot html:select and html:optionsCollection? Why not only in html:select or only html:optionsCollection?Because they actually refer to two different things, and should be two different values.
    html:options gets the list of possible values
    html:select stores the "selected" option. (consider what you would have if you just used a standard html:input here, and typed the id directly in - THATS the property to bind to)
    2. In the ActionForm for my JSP i don�t know what data type have to use to declare the variable that's linked with the option or with the select. I'm using Object for now.You do now - because it is declared/mapped seperately
    3. Why the only way to populate the html:optionsCollection in the Action is passing the object in the request object as an atribute in the next way:Its not.
    The way you mentioned is also valid. If both the "selectedItem" and "listOfItems" are properties on your action form, you can leave out the "name" attribute, and they will be found there.
    However if you are dealing with request scoped beans, you will have to populate the list on each access of the page - you will need a "load" action to poupulate the bean with the items for the dropdown, and make sure that it is always populated when you return to it (eg on an error condition).
    That is why setting it as an attribute is sometimes preferable.
    Cheers,
    evnafets

  • In CC214 PS Why has adobe removed the "print Size Button"  And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?

    In CC214 PS Why has adobe removed the "print Size Button"  And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?
    These two things need to be remedied in their upgrades because It's become such a bother I've had to revert to older versions of PS.

    Yea, and it's a pain to get to.  What was the rational for removing the print size button?   With the magnifying glass tool selected in older versions of Photoshop you would get a button that says "print size" right next to Actual pixels, Fit Screen, Fill Screen. Now I have to go out of my way and dig for it if I want to see the print size.  Of all the buttons you could have taken away, why not fill screen?  I never use that.
    Besides the point I just downloaded the Oct Upgrade for PS and surprise! Nothing has changed and these are two big black eyes on newer versions of Photoshop.   The Brush preview window is  unchanged in CC but in CC2014 it's basically worthless.  If you apply a texture to a brush you can't properly see the scale of the texture, the spacing, scatter, etc...

  • My options and tools have changed.  Unable to extract and delete pages in my PDF document.

    My options and tools have changed.  Unable to extract and delete pages in my PDF document.  How can I get them back?

    Well could it be another Adobe I had before?  I bought software and in that under tools on the far right had all kinds of options.  Also under view and window.  Then I bought another adobe product to try and convert a PDF into a word doc and now under tools that is all it wants to do and my view and window options have changed.  Not to mention the new software i bought isn't converting it just spins.  So I am bummed that neither is working for me.  It is more important for me to be able to extract pages then it is to convert.  Which adobe product allows this?  Maybe I can unistall and reinstall the Adobe software I spent 300 dollars on vs the 19.99 product.

  • Why does my Logic Icon have a question mark over it and will not boot up??

    Why does my Logic Icon have a question mark over it and will not boot up??

    Because it was moved, renamed, or deleted, and needs to be put back or reinstalled.
    (107320)

  • Why do i have a dictionary on a Macbook and do not have it on the iPhone?(I do not wish to purchase a third party app when it is coded in OS/iOS)

    Why do i have a dictionary on a Macbook and do not have it on the iPhone?(I do not wish to purchase a
    third party app when it is coded in OS)

    You do use Siri. Hold the home button until Siri responds and say "Define bottle". Same thing, no?
    Hope that helps

  • 16 mo young Mac Pro will not turn on. Dead. Why. No problems ever! Installed Yosemite and did not boot up after. Did that kill it? To young to die. What

    16 mo young Mac Pro will not turn on. Dead. Why. No problems ever! Installed Yosemite and did not boot up after. Did that kill it? To young to die. What happened?what do I do now??????? Help!

    Note that you don't have a Mac Pro as stated. Your profile says you have a MacBook Pro. Please clarify as they are entirely different computers. If nothing below works for you, then make a Genius Appointment and take it in for service.
    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Setup has encountered an error and can not continue. Contact Adobe customer support for assistance."  CS4 Windows XP

    ISSUE:-Customer is trying to install  Web premium CS4 and is getting error :Setup has encountered an error and can not continue. Contact Adobe customer support for assistance." no trial version or previous version installed.
    Environment:- win xp 32-bit
    QUERY:-
    There are kb documents related but they are all with CS2 not with CS4 though have tried the steps any other suggestions.
    kb408524; 333146

    ISSUE:-Customer is trying to install  Web premium CS4 and is getting error :Setup has encountered an error and can not continue. Contact Adobe customer support for assistance." no trial version or previous version installed.
    Environment:- win xp 32-bit
    QUERY:-
    There are kb documents related but they are all with CS2 not with CS4 though have tried the steps any other suggestions.
    kb408524; 333146

  • After I connected my hard disk to a friend's windows system all my files have been converted to .ink files and do not open....what do i do? They had important content

    after connecting my hard disk to a windows laptop all my files have somehow converted to .ink files and are not accessible.....what do i do?

    What do you mean by "all files", surely only one category of files got their default open program changed.
    Choose the affected files, right click on an individual file, and "open with",...change to default program.
    For a group, right click > show info > open with > change ALL
    If more than one group of files has had its default opening program changed, a time machine roll-back would be the easy option. Do you have a TM backup?

  • I have a new Toshiba Thrive tablet and do not see it on the list of tested, supported, or unsupported devices. Will Firefox work on my tablet?

    I have a new Toshiba Thrive tablet and do not see it on the list of tested, supported, or unsupported devices. Will Firefox work on my tablet?

    You should be able to find Firefox by searching for it in the Android market on the device.

  • I have an apple TV Model A1427 and do not have an icon for youtube. How can I add youtube to the home page?

    I have an apple TV Model A1427 and do not have an icon for youtube. How can I add youtube to the home page?

    Have icon but cannot connect - Please Help.
    Mine is Gen. 2 - Model MC572C/A. I have the YouTube icon but cannot access YouTube.  Message says "No content was found - There is a problem communicating with YouTube. Try again later."  This problem has been for at least 1 month now.  Any ideas?

  • HT1222 My phone is telling me about a Software Update but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

    My phone is telling me about a Software Update 7.1.1 but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

    See if this helps:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212

Maybe you are looking for