Why we have so Crap colours in Bex Query in GUI 6.40 ??

hi
Many of the end user are not like the light colors that are displayed with in sap gui bex . Sap says there is no solution that will change default colors in bex. We can not advice several 1000 of user to change the settings from system dependent to the else or to do customizing .. And in the same time whet there is NO solution when changed "look and feel" . It is very difficult to convince a end user .. one can not say it is as is ..
Please advise any solutions and idea's

Hi Kumar,
I'm not sure about Bex Query, but for SAP GUI there is a switch you can set on the backend. OSS note 610274 says you can set the profile parameter sapgui/theme in transaction rz11 to values such as ENJOY, STREAMLINE or TRADESHOW. You would probably want to set it to ENJOY.
Again, I'm not sure if this will also affect Bex Query, but it might be worth a try.
Best regards,
Christian

Similar Messages

Problem while opening Bex query on the web

Hello BW experts,
I have a problem while opening Bex query from my SAP Favorites.See below.
When i double click on the query, i get the following page, with the server name KBWS01QX.
But, from RSRT Tcode, select the query > query display as HTML > Click on ABAP Web , click execute as shown below, it is going to the correct URL as in the 2nd screen shot below.
My question is why is it going to the wrong URL when i open it from SAP Favorites menu?
I want it to open the same URL as it opened from RSRT(which is the right one)
What is the Config needed to make it to work from SAP favorites.
Any help would be appreciated.
Thanks alot.
SV

Hello,
Thank you all for your responses.
See below some additional info.
From RSRT, this time I clicked on JAVA WEB, and i get the below URL, which is the same URL i was getting when i executed the query from SAP favorites.
http://kbws01qx.xxxxxxx.com:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCONSUMPTION
Also, i have executed the Function module : RSBB_URL_PREFIX_GET and i get the below values.
It seems that it is trying to connect to Java portal something services may be, but i want it to open in ABAP web only.
Please help.

Date Filter in BEx Query not applied to Webi Document

Hi
I have a simple BEx Query on 0MATERIAL - with Article (0MATERIAL) and Created On Date (0CREATEDON) characteristics in the Rows and 1ROWCOUNT key figure in the columns.
If I restrict the BEx Query on 0MATERIAL to a single value, only that particular record is returned when I run the query in WebI - which shows Article and Created On Date.
However, if I restrict the BEx Query to a specific 0CREATEDON date, the WebI report ignores this restriction and returns ALL records in the InfoProvider 0MATERIAL.
If I run the BEx Query in the web, only those records with the particular restricted date are returned, so why does the WebI report ignore the BEx Query date restriction? Any ideas where I am going wrong?
Thanks
Anton

Hi Victor
Thanks for the reply. It turns out even after refreshing the universe structure and exporting I had to shut down Webi and reopen it for the changes (date restriction) to take effect.
But thanks for the headsup on that bug/SAP note anyway - it is helpful to know.
Rgds
Anton

Division in bex query designer

Hi experts,
I have a strange problem in bex query designer. I am trying to calculate margin in % but the calculation gives the wrong result.
The two figures I try to calculate are -25124 and -91248 (figures in 1000 NOK)
The result should be (-25124/-91248)100 = 27,53* (when formula entered in excel)
I have tried the following in Bex query designer
-25124 %A -91248 = -0,02753%
(-25124/-91248)*100 = 0,02753
What might be the problem here?

Thanks again for your answer,
I will try to explain my report (requirement from the business user)
Actual (KF)----
Budget (KF)
Sales-- -91248--
-77153
FSP-- -25124--
-18918
Margin % -
(FSP Actual/Sales Actual) 100---(FSP Budget/Sales Budget)100
Dim
Dim
Result
The margin is calculated in the cells in the bex query designer to differentiate between actual and budget. There is no option to calculate the margin in the columns as this would influence all other rows aswell.

" Performance of Bo Report's in Bex query "

Hai Friend's,
I have Developed a report in Bex query, when I am Presenting the Report to the Business User's,It is taking a huge time. can anybody let me know what are the steps to be taken to reduce the time to display the Report in Bex query.

Hi,
If you are worried about the performance of Underlying BEX query then you can check following things,
1) Use only required characteristics in the initial drilldown and put remaining in Free chars.
2) Use Aggregates or BIA Index if you have BIA available.
3) Enable OLAP Cache
4) Use of precalculated web templates
Regards,
Durgesh.

How to restrict the Null Values for Key Figules in the Bex Query

Hi Friends,
 I want to restrict the Null values of a perticular key figure in the Bex Query Output.
I will explain in details. i have 3 key figures in my query.. let us assume.. key1 key2key3
key1 key2 key3
4 4 100.00
5 0 200.00
1 0 19.00
0 1 10.00
i don't want to see the the records for which key 2 is 0.
we have a setting in the Bex Query for restricting the Zero values in the query properties. If we enable that setting it will show
4 4 100.00
but i want the report to display..
4 4 100.00
0 1 10.00
can any body guide me. i want to display the values if key2 <> 0.
Regards,
Nagesh.

Hi AVR,
nice to see reply.
can you eloborate your view...how can i put the condition.
i want to put the condition key2 <> 0.
Regards,
Nagesh.

BEx query iView in Portal

Hi All,
I am trying to create a BEx query iView in EP 7.0 and my BI system is BI7.0.
I am refering to the following <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm">LINK</a> for this but I am not able to get the value for "bookmark_id" from the URL which is generated when I execute the query in standalone mode.
My URL is
http://portalserver:port/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0D_DECU_Q0011
In my iView I have made following settings in BEx query string
template_id=0ANALYSIS_PATTERN&infocube=0D_DECU&query=0D_DECU_Q0011
I am getting following error when I preview the iView.
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
iView not found: com.sap.ip.bi.web.portal.integration.launcher.
Exception id: 06:50_07/08/07_0085_4284050
Please help
Regards
Sid

Dear Luciano,
I referred to the note you have suggested and as per the note, I need to install BI-JAVA on my portal system to access BI content.
Please see this <a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=410737">FORUM</a>, it tells that with single sign on between portal and BI system you will not require BI-JAVA on EP if it is already installed on BI system which in my case is already done.
Kindly comment on the forum whether it is true or not.
Regards
Sid

Bex Query Filter Page in BSP - Urgent Please...

I have seen many threads about Bex query in BSP, but can any one tell me how can i display the default Bex Query Filter page in BSP.
I created a query in Bex Query Designer and added few filters and when i execute i get a popup where i can enter the input values for which the report would be generated, can i get the same functionality or similar functionality if i have the same Bex query in BSP.
Also apart from the filters specified in the Bex, all the columns displayed in the report appears in the filter section how can get the same functionality BSP.
Note: I do not want to use Bex Web Application Designer
Please tell me the steps for the same.
Atleast please give me the steps at a high level. Please...

Hi,
1. Create a CKF, inside the CKF window create a new Formula Variable --> Right click in left side window on var and say create new Variable
2. Create new variable of replacement path type and reference Characteristic as the TO DATE value which you want to be max.
3. Now drag this new created var to CKF and save.
4. Now create condition with follwoing deatils:
Key Figure Operator Value
Max Date(CKF) TOP N 1
Save and execute your query. This will give you max value for the To Date field.
Hope it works .
Regards
Raj Rai

How to get bex query changes reflected in webi.

Hi expert,
I am using sap bex query in WEBI by BICS connection, but I have done some change in bex query, how can I get those changed reflected in webi.
Many Thanks,

Hi Zhang,
Please review following link which would help you to understand the impacts of changes in the BEx Query to associated universes and webi reports.
http://wiki.scn.sap.com/wiki/display/BOBJ/Impact+of+a+BEx+query+change+to+universes+and+WebI+documents
Regards,
Veer

Currency Conversion in BeX Query

Hello Experts
I want to have corrency convetion option in Bex Query and have few questions regardig that.
i am using key figure 0DEB_CRE_LC which has currency as 0LOC_CURRCY.
1. how do i allow user to enter currecny, using some input variable for currency char.?
2. do i need to associate some date for this conversion?
3. what exchange rate will be used?
Thanks in advance
Regards
Sudeep

Hello Sudeep,
1. how do i allow user to enter currecny, using some input variable for currency char.?
Answer: Create a variable on 0Currency and select the conversion type which you have maintained in RSCUR tcode. Make this variable as input ready. This will give the user the flexibility to enter the Currency.
2. do i need to associate some date for this conversion?
Answer: Yes you need to associate the Currency conversion type to your conversion. Same can be maintained in RSCUR tcode.
3. what exchange rate will be used?
Answer: In RSA1, goto source system tab and right click on the Source system. Select "Transfer exchange rates". This will transfer the exchange rates which are maintained in your ECC side. The exchange rates are maintained in table TCURR. you can check the table in SE16.
Regards,
Satyam

Error with bex query in web

Good morning together,
i have trouble again with a BEx Query in our BW landscape.
I have created a query with a lot of key figures. When i call it in BEx (Excel) i get data; everything is ok.
But when i say, execute this query in web, or try to call the query in connection with a web template i get the error message "no data was found".
It is the same selection what i choose in the variable screen. How can i solve this error?
Thanks to all.

Thanks for your reply Suman,
the WT is ok. Have checked the RSRT too. i get everytime the message
"No Data available
Could not find any data to display. This might be due to the current selection of variable or filter values".
although in BEX (Excel) I get data with the same selection.

BEX Query Designer - Application Error

Dear experts,
I have a problem with my BEX Query Designer. Whenever I tried to save a query, I caught the following exception:
BEX Query Designer has encountered a problem and cannot proceed with the current action. We are sorry for the inconvenience.
Additional Information:
QD revision 300
Internal Error ID: E-ONGUIUNHANDLEDEXCEPTION
Error Message: Method not found: 'Void com.sap.bi.et.Communication.RZX0.RSZ_X_ELTPROP.set_PROPVERS(System.String)'
Can someone help me to solve the problem?
I am using the following version:
BI AddOn 7.X (based on 7.10), Support Package 3, Revision 520

From the log:
5:01:38 PM.31 ########## --> com.sap.bi.et.QueryDesigner.QDbApplicationData.OnGuiUnhandledException ##########
-EXCEPTION-START- 5:01:38 PM.31: ---
Exception Message: Method not found: 'Void com.sap.bi.et.Communication.RZX0.RSZ_X_ELTPROP.set_PROPVERS(System.String)'.
Exception    at com.sap.bi.et.QueryDesigner.QDbElement.ToTable(RSZ_X_ELTPROP isEltProp, QDbCopyInfo iToTableInfo)
   at com.sap.bi.et.QueryDesigner.QDbQuery.ToTable(RSZ_X_ELTPROP isEltProp, QDbCopyInfo iToTableInfo)
   at com.sap.bi.et.QueryDesigner.QDbElement.ToTables(Hashtable iTables, QDcElement iElementsToSave, QDbCopyInfo iCopyInfo)
   at com.sap.bi.et.QueryDesigner.QDbElement.Save(String iRole, String iNode)
   at com.sap.bi.et.QueryDesigner.QDbCommandSaveElement.Save(QDbElement iElement, Boolean iOutputSuccess)
   at com.sap.bi.et.QueryDesigner.QDbCommandSaveAsElement.Save(QDbElement iOriginalElement, QDbElement iSaveElement)
   at com.sap.bi.et.QueryDesigner.QDbCommandSaveAsElement.ExecuteCommand()
   at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
   at com.sap.bi.et.QueryDesigner.QDbCommandSaveElement.ExecuteCommand()
   at com.sap.bi.et.QueryDesigner.QDbCommandSaveQuery.ExecuteCommand()
   at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
   at com.sap.bi.et.QueryDesigner.QDbCommandManager.CommandExecute(QDbCommandBase iCommand)
   at com.sap.bi.et.QueryDesigner.QDbCommandManager.InitialCommandExecute(QDbCommandBase iCommand)
   at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoExecuteCommandInternal()
   at com.sap.bi.et.QueryDesigner.QDbCommandManager.ItemClickedHandler(Object sender, BarItemClickedEventArgs args)
   at com.sap.bi.et.QueryDesigner.QDdEventDispatcher.MenuItemClickedHandler(Object iSender, BarItemClickedEventArgs iE)
   at Syncfusion.Windows.Forms.Tools.XPMenus.BarManager.OnItemClicked(BarItemClickedEventArgs args)
   at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.OnItemClicked(EventArgs args)
   at com.sap.bi.et.QueryDesigner.QDiBarItem.OnItemClicked(EventArgs args)
   at Syncfusion.Windows.Forms.Tools.XPMenus.BarItem.PerformClick()
   at Syncfusion.Windows.Forms.Tools.XPMenus.BarRenderer.OnMouseUp(MouseEventArgs e)
   at Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.OnMouseUp(MouseEventArgs e)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at Syncfusion.Windows.Forms.Tools.XPMenus.BarControlInternal.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Full Stack:   at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
   at com.sap.bi.et.common.appl.Log.Trace.Exception(Exception ex, String iAdditionalInformation)
   at com.sap.bi.et.QueryDesigner.QDbApplicationData.OnGuiUnhandledException(Object iSender, ThreadExceptionEventArgs iEventArgs)
   at System.Windows.Forms.Application.ThreadContext.OnThreadException(Exception t)
   at System.Windows.Forms.Control.WndProcException(Exception e)
   at System.Windows.Forms.Control.ControlNativeWindow.OnThreadException(Exception e)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
   at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.Run(Form mainForm)
   at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
   at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
   at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
-EXCEPTION-END----

Created Webi report using BEx Query.

Hi All,
I am going to upgrade in BW and using BEx & Webi Report. I have created webi report using BEx query. Now I need to test data in webi report.
Can anyone tell me how to test data?
Regards,

Hi,
compare the webi report data with Bex report. more you can compare webi report with SAP R3 system for random records.
Thanks,
Amit

Publishing a BEx Query reports from BI Portal to Main portal

Hi,
We have 2 portals in out landscape.
BI system has its own portal and the main portal for the commercial users.
I have a requirement to bring BEx query Reports to Main portal.
I am wondering, how this can be done.
Thanks
Sam

Hi vel,
1. You can connect BW/BI system with your portal.
2. Create BEx iview (7.0) from iview templates.
3. Then display report on portal.
Feel free to update me as per your findings.
Regards,
sam

Bex Query prompt

Hi Experts,
I have added End_date(zc_edat) in bex query filter panel and restricted with characteristic type variable Authcode End date( Ref char is zc_edat).
Now the requirement is i want the same field (zc_edat) in query filter panel restricted with charcteristic type variable Expiration date (Ref char is zc_edat).
So there will be 2 fields in the prompt, one is restricted with authcode variable and other is with expiration date.
Please guide me how to implement this. Thanks is advance.
Regards
Dinesh

Hi Dinesh,
We can restrict the same characteristic with two types of elements
by adding as many in your selections.
Hope answers your need - Kumar

Why we have so Crap colours in Bex Query in GUI 6.40 ??

Similar Messages

Maybe you are looking for