Why we have to create logical key at levels in Hierarchies
hi
i have one doubt that what is the use of logical key at levels in hierarchies directly we can create logical primary key and we can enable for drill down option
what is the use of creating logical key at levels (what i known is that is for unique column in the logical level)
i need small example for this
apart from that why we have to create logical key in logical tables in bmm layer so what is the need of it
Thanks
Sreedhar
hi Sreedhar,
I suggest you to go through
http://download.oracle.com/docs/cd/E12103_01/books/admintool/admintool_BusModSetup20.html#wp1005703
will clarify your doubts :-)
Thanks,
Saichand.v
Similar Messages
-
Where we have to create depreciation key in asset accounting for as02 ?
Hi all
where we have to create depreciation key in asset accounting for as02 ?
Regards
SaimedhaHi,
Saimedha....
AS02 is for Asset change..........here you can change only dpercaition keys.......
You can define in AS93..........under Takeover values.
Also u can check the value at AS02 under Deperciation area at initial tab ..you can see there at Menu Bar..
Regards
Ricky -
HT3819 I'd like to find out why I have to create a new password every time I update apps.
I'd like to find out why I have to create a new password every time I update
Exactly what message appears?
-
Have to create logical measure column - Help need
Hi Gurus,
I have a situation like this below. A service request may have activity subtype as breakfix, startup etc. A service request may have only one breakfix or breakfix with additional subtypes like startup etc.
Ex:
Service Request # Activity subtype 2nd subtype
1 breakfix none
2 breakfix startup
3 breakfix none
4 breakfix startup
5 breakfix startup
How do i write a case statement to find out only breakfix as subtype (2) and nbr of service requst with breakfix and other type as 5.
Please guide me how to write.Your requirement would have been better with an example.
I'm writing actual SQL for ease - you'll need to convert
SELECT CASE WHEN activity_subtype = 'breakfix' THEN
CASE WHEN 2nd_subtype = 'startup' THEN
1
END
END count_breakfix_startup,
CASE WHEN activity_subtype = 'breakfix' THEN
CASE WHEN 2nd_subtype = 'startup' THEN
0
ELSE
1
END
END count_breakfix_none
FROM table...You'd need to switch to OBIEE CASE <<expression>> WHEN <<expression>> THEN <<expression>> END syntax. and you will have to hard code every subtype/2nd subtype combination.. (or use a repository variable). -
What is the use of logical key in logical tabls in bmm
hi
can any one tell me why we have to create logical key for logical table in bmm
Thanks
sreedharSee the links below
why we have to create logical key at levels in Hierarchies
Re: Business Model - Logical Primary key
Regards,
Sandeep
Edited by: Sandeep Saini on 15-Sep-2010 05:17 -
How to create composit key ??
Hello Friends!
i need your help. I have to create composit key.
I have 2 tables. Table 1 contains 9 colums and table 2 contains 3 colums. I am writing down just related colums of table1
Table1: SID (pk) , Bytes_convert_test , Operator , Value , offset_test , Bytes_convert_jump , offset_jump
Table2: SID (fk) , value , type , ID (pk)
in table2 type represents the 2 colums in table 1 (Bytes_convert_test and Bytes_convert_jump). Type colum could be anyone of them may be for one record it is Bytes_convert_test or for another record bytes_convert_jump. values
Value colum in table2 having different values or may be same values for both records. but my task is that i have to store record like if the type in table2 is bytes_to_convert then the values colum stores values for bytes to convert record. In short i have to separate values according to type. I am not sure that i need SID as fk in table2.
Remember value colum in table1 containing different entries.
Waiting for quick reply.
BR,
Zeeshan
Edited by: user10899712 on 2009-apr-20 03:42Hello Zeeshan,
You are saying you want to use Type and Value fields in Table2 as foreign keys to Table1 and based on logical operations,Type maps to Bytes_convert_test and/or Bytes_convert_jump in Table1. This means that there is no way to do a straight join between Table1 and Table2 that I can see. Unless you have some simple logic you can add to a query to get the joins to work consistently, I would strongly recommend you use a simple foreign key in Table2.
Using a simple foreign key that goes to Table1's primary key not only makes the table joins easier, it also will reduce database hits - since now the primary key can be used when traversing relationships to search the cache instead of having to always go to the database.
Best Regards,
Chris -
Create logical file path and read it in main program
Hello Experts,
My requirement is, I have to read files from application server.
File path/ Directory is different in different system (systid). i have to read all files starting with (xyz*) from mentioned directory.
This path i must define in logical path.
Following are the steps i followed.
1) In FILE (TCODE) i have created a logical path and assigned a physical path to it.
2) I have created logical file ( I am not sure about this, as i dont have to create logical file, i just need to read file from above path starting with xyz*, but FM FILE_GET_NAME requires logical file name so i have created it).
3) I will pass logical file name to FM FILE_GET_NAME and recieve physical file path(with file name which i can ignore).
these all steps i found on SDN. but its not working.
FM FILE_GET_NAME is always returning same file path ( Not even close to what i have defined ).
I can not read data from Table path as it will return physical path as it is, but i need it replaced with system id.
Any suggestion will be really helpful.
Thanks in Advance.
Regards,
AmarHi Amar,
one difficulty defining physical path name is to know the right Syntax group.
For example if you habe OS Linux, you need Syntax Group UNIX here. In Table OPSYSTEM you can see, which OS (OPSYS) needs which FILESYS (Syntax Group).
If you always get a wrong physical path, this may be caused ba a wrong choice of the Syntax Group. Only the correct one will lead to the correct path.
Regards,
Klaus -
Why I have to press fn to activate speaker?
why I have to press fn key to activate speaker, and my caps lock on and off.
Same issue already several weeks.
And we are not alone:
http://forums.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/i...
At all there is, I think, 4 threads in parallel about this issue at CB forums. One of the:
ms.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/index5.html
I already contacted BB Help at Twitter. Answer:
Thanks for the information. It seems that you have installed an OS version higher than the one supported by your carrier on your device. Please contact your carrier to get the supported OS version and try the proximity and light sensors. Let us know if you need further assistance. Cheers. ^LFC.
I did replay:
You are confused me. Phone got updates over network automatically. On crackberry forum a lot of people from different countries and with Different OS version, but with the same problem. Hi, this is thread at CrackBerry: http://forums.crackberry.com/blackberry-z10-f254/proximity-sensor-906493/index3.html
This my replay was 22 of march. No more answer from BB.
I can't contact my operator - 3UK, because I bought my from on Amazon from Amazon. This phone not from operator - seller is Amazon.
What I already done:
For last week, I read, how to install OS using Sachesi and Autoloader. I used Sachesi to load 3 UK version, I installed autoloader from this links:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
This
For Z10 models STL100-1, 2, -3, -4: Download 10.2.1.1925
Doesn't help
And this:
For Z10 models STL100-2, -3, -4: Download the 10.2.0.1803 OS
No result.
After install all of them phone wants to update to 10.2.1.2102 by air.
BBVE in all versions sais: Can not obtain data from sensors.
Dear BB support, please, can you explain, how to resolve this issue? -
Why won't FireFox 4 play mp3 files that have been created since the FF update? It will play mp3 files created prior to the FF update. All of the mp3 files have been created in the same manner, as bounces from Logic Pro 9. Thank you.
Hi David,
Thank you for your detailed question. It sounds like the real issue is pdf files. Are there any antivirus/firewalls that might be blocking this specific file type? or are there any preferences in your control panel that might be blocking this?
Do you have any stored preferences for PDF files in Firefox?
*[[Applications panel - Set how Firefox handles different types of files]] -
Why do we create logical systems in ALE?
Hi All,
i got this question in interview.
Why do we create logical systems in ALE?
Thanks & Regards
sureshHi
In addition to above .
A logical system is used to identify an individual client in a system, for ALE communication between SAP systems. That's why you see a field for 'logical system' in the client master data in SCC4 (table T000).
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
http://help.sap.com/saphelp_nw04/helpdata/en/b5/1d733b73a8f706e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/69/c24ca94ba111d189750000e8322d00/content.htm
http://72.14.203.104/search?q=cache:J-uDLyT0w54J:www.topxml.com/biztalkutilities/walkthroughs/SAP%2520Configuration.pdfwhatislogicalsystems+(SAP)&hl=en&gl=in&ct=clnk&cd=5
http://help.sap.com/saphelp_nw04/helpdata/en/78/217dc151ce11d189570000e829fbbd/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/d7/9c73631d6c11d2a56e0060087832f8/content.htm
This guide is really good shows step by step procedure.
http://72.14.203.104/search?q=cache:Xyl0zxpyEXsJ:www.sappoint.com/abap/ale.pdfLogicalsystem(ALE)&hl=en&gl=in&ct=clnk&cd=9
for one client config
http://www.sappro.com/downloads/OneClientDistribution.pdf#search=%22Logical%20system(ALE)%22
Please reward for the same. -
why do i have to create a new itunes account because I moved to Canada from the U.S.?( My current account won't let me change my address to canada so my billing address for account is incorrect, making it impossible for me to buy anything). Will it affect what I am able to put on my device i.e. already downloaded apps, music, etc?
fayry wrote:
... how do I move over my purchases from my current account to my new account?
This is not possible...
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
Apple ID FAQs > http://support.apple.com/kb/HE37 -
Yeah. So. Basically what the giant-*** title that I didn't think was just a title said: Why should I have to create a new @icloud account? And how do I make my idiot phone not ask me to do so?
It's not asking you to create a new iCloud account or AppleID - it is asking you to create an iCloud email address within your existing iCloud account.
You need to create an iCloud email address because that is where the Notes you want to use are stored and how they are 'synced' between devices and iCloud. -
Dear
I try to create my Account ID....and i don't understand why i have to put payment? before my friend create Account ID don't have to put payment they still can create account ID... and now i buy iphone but i don't have credit card that mind i can't not do itHi,
This Link explains how to Set Up an Account ID... without a credit card...
http://support.apple.com/kb/HT2534
Hope it helps,
Cheers, -
Why can I only create 4 forms when I have purchased the entire package at 100+ dollars?
Why can I only create 4 forms when I have purchased the entire package at 100+ dollars?
FormsCentral can be used from anywhere, but to purchase a subscription you need a credit card with the mailing address in one of the countries supported for purcahse:
http://forums.adobe.com/docs/DOC-1375
The partner can purchase if they have access to a card in one of those countries. Alternatively they do not need to purchase a subscription to edit forms that you've created, they do in order to create multiple forms of their own, but by your sharing forms with them at the "Co-author" level they have access to the editing. Here are the instructions to share a form:
http://forums.adobe.com/docs/DOC-2462
Thanks,
Josh -
Why did I have to create a new ID when I logged into Communities this morning? Appears I don't have any history anymore either. I used the same browser and username/password (its stored in my browser) and it asked me to fill out my profile and pick an alias. Not sure what the deal was, it appears Apple can't figure out this whole id thing. I've used other community sites for over a decade without having to change my user/profile, I don't understand why this is such a pain with Apple.
Agreed! I was trying to find out how to reclaim my old name since I use it for all sites. I can't seem to find the answer so I made a new one to ask questions before giving up on it.
Maybe you are looking for
-
Can I create a form in muse and have it work with a different hosting service?
I contacted a hosting service that I need to upload the site I built in MUSE to. (Hosting has already been purchased). I asked OMNIS: I want to create a form with Muse and then upload my site to OMNIS, not muse, the forms will display as I designed t
-
Documents now opening in pse editor photoshop instead of a PDF in Adobe reader?
why is all of my documents now opening in pse editor photoshop instead of a PDF in Adobe reader?
-
How do i get my registration form to post with MD5
Hi I have a registration form which posts to my, mysql database via this code: <?php define('DB_NAME',''); define('DB_USER',''); define('DB_PASSWORD',''); define('DB_HOST',''); define('DB_TABLE','user00'); $link = mysql_connect(DB_HOST, DB_USER, DB_P
-
Basic questions about Mapviewer for OBIEE 11G
Hello All.. I am pretty rookie in OBIEE and I have never worked with Mapviewer before.. I am going some POC right now in my environment and I want to experiment map reports in OBIEE.. My current OBIEE version is 11.1.1.6.5, Oracle DB version is 11.2.
-
Add new manager field in SAP Query
Hi All, I need to find manager for the employee. Is RH_GET_LEADING_POSITION right function module? After finding the manager I need to add new field 'Manger' in the existing SAP Query. Please can anyone help me inserting additional code into the SAP