Why we need ITS in application server?

Can we say that SAP application server acts same as J2EE application server?

Web Application Server roles are
1. Web Application Server provides a platform to run new and existing SAP Applications.
2. Supports ABAP for the ABAP Community
3. Supports Java/J2ee for the J2ee community
4. Applications can get advantages from both technologies
5. J2ee get the new features from ABAP technology
6. Common installation and administration
7. Same platform for all SAP Solutions, customer enhancement and development.
If you want to know exact information about WAS and J2EE....please refer this document
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9b11c390-0201-0010-58a1-b08d5adc3b93

Similar Messages

  • Why we need ITS & Web As server in portal landscape

    HI Gurus,
    Why we need ITS server and web As server in portal landscape
    Thanks in Advance,
    Sakthi

    Hello Shakthi,
    Now ITS is integral part of Web As. You dont have to install in seperate. ITS is useful if you want publish the SAP Transactions to internet.
    If you use ITS applications, you will lot of draw backs when comes to session closing and memory issues. In order to overcome this SAP has given you to develop different kind of UI development using BSP's and Webdynpros etc...
    Hope i have cleared ur doubt.
    Rgds
    Pradeep

  • Need to upgrade Application Server 10g 10.1.2.0.2 to 10.1.3

    Dear All,
    I am having bit doubts on choosing the Application server down load file from the Oracle site. Currently we are using Application Server 10g 10.1.2.0.2 Forms and Report service. I need to up grade the Forms and Report service to 10.1.3 version of the Application Server 10g .
    If I select the Application Server 10g Release 3 from the site its directing me to the big selection list. Actually i bit confused which one i need to choose. I need to upgrade only the Forms and Report service Application Server 10g .Iam sure somebody can help me to solve this confusion. I appreciated ans thanks your attention in my query.
    regards
    Mathew

    Hi Mathew,
    If I am not mistaken, there is no Forms and Reports version 10.1.3. There is an Application Server version 10.1.3.x but this is a J2EE only release. Forms and Reports have not been bundled in this version.
    Could it be that you are mistaken with version 10.1.2.3 which is a patch set on top of Application Server 10.1.2.0.2 ? If this is the case, you can apply the patch set as per directions in the readme from the patch set. The patch set is available from [My Oracle Support|http://updates.oracle.com/download/5983622.html].
    Thanks,
    Erik Janssen

  • IN SM51- Need to change Application server hostname as small lock

    Dear All,
    In my SAP R3 4.6D system setup is like
    1. R3 Database server (CI+DB) with one application server(DI). In Application server SM51 transaction screen application server host name is  shows as Caps lock. But DB server hostname is in small lock. 
    In SM51 in application server
    Server names                   Host name                      Ty.
    opsssg02w_SNP_01                OPSSSG02W                       Dialog Update Backg Spool Upd2
    opsssg01w_SNP_00                opsssg01w                       Dialog Update Enqueue Backg Spool Upd2
       I want to change the Application server host name from (OPSSSG02W)  to (opsssg02w) as small lock. This is settings  required to connect SAP with Externel servers.
    Please let me know where /How to change the Application server hostname as small lock ?.
    Thanks
    Malai

    Dear Sergo Beradze,
    I am sorry I missed to Open the Dummy At last time.
    In Rz04 -> Dummy-> here application server host name is lowercase. Please find the below screen.
    Instances of OP mode      DUMMY
    Host Name    Server Name          Dia  BP BPA Spo Upd Up2 Enq Sum  Instance Profile
    opsssg02w     opsssg02w_SNP_01       6  10   -   2   2   2   -  22   \\opsssvg01w\sapmnt\SNP\SYS\profile\SNP_D01_opsssg02
    opsssg01w     opsssg01w_SNP_00       5   9   -   2   4   2   1  23   E:\usr\sap\SNP\SYS\profile\SNP_DVEBMGS00_opsssg01w
    opsssg02w_SNP_01 - Contents  below
    Installtation data :
    Host name            opsssg02w
    SAP system number    01
    Instance Details :
    Appl. server         opsssg02w_SNP_01
    Instance name        D01
    Operating sys. type  Windows NT
    Admin user
    Profile Data:
    Start profile   \\opsssg01w\SAPMNT\SNP\sys\profile\START_D01_opsssg02w
    Instance prof.  \\opsssg01w\sapmnt\SNP\SYS\profile\SNP_D01_opsssg02w
    Home directory  E:\usr\sap\SNP\D01\work
    Also add little more information on this ..
    In Application server:
    SAP MMC - Its shows the Application server hostname as Lowercase
    SAP Easy access screen -> system -> Status-> Host data-> Server name -> opsssg02w_SNP_01
    Thanks
    Malai

  • Why do we use oracle application server

    I need to understand oracle application server.

    Hans Forbrich wrote:
    <snip>
    Note that it's all about controlling costs. And they are finding App Servers have their own cost - in programming and administrative complexity.And the pendulum swings. Having started my IT career on IBM mainframes when PC's were still just a hobbyist's curiosity, it's always been somewhat amusing to me to watch the growth of the PC and how the younger generation of IT "professionals" (yes, I deliberately use the term loosely) discover, then struggle to solve, problems that were solved on the mainframe decades ago. Problems of load balancing, multi-user data access, version control, configuration control, etc. etc. etc.
    I'll spare the "war stories". Just thought your comment that I retained above was a bit thought provoking - that "there is nothing new under the sun"
    ;-)

  • Do you need to purchase Application Server license for WebCenter Suite?

    Before the BEA product merger, WebCenter was sold as a separate license on top of the Application Server license. Now with the new pricing of 125K, does this mean you have to pay for a separate App Server license or is the new pricing included with an App Server license?

    Appserver licenses need to be purchased separately

  • Extracting Service Ports (ITS) and Application Server (SAP)

    Hi,
    Can any one pls do let me know how i can extract the information of the port number of Service (AGate) "sapavw00" and ITS Manager "sapavwmm" , Without goijg to the Service file under root/windows/system32/drivers/etc.
    I want to extract these information from SAP system only using some T-code.
    how can i do that??  and if i know the name of the application server of system running on remote host, how can i get its IP address?? say for example name is "I90external"
    Abhishek

    Hi,
    pl be aware of the fact that SAP system is running on the Remote Machine. I have ITS Installes with a Instance name I62 on my mchine. i installed the Wgate part on my machine (i.e. dual host) not the Agate as SAP system is running on the remote host.
    Now I want to use IACOR Admin Tool. the service is already running and there are no entry in the connection of the IACOR Admin, so i want to create a new one.
    on pressing new button. i entered the ITS instance name I62 (which i prepared as Wgate part) and the Web server (hosting Wgate).
    my confusion is that what should i fill up in these values.................
    ITS (AGate)=
    R/3 Name=
    Group?
    Message Server=
    I know the Name of Application server i.e. I62production, System ID i.e. I62, System Number i.e. 09
    the question is from where i should extract the value of  R/3 Name??? and Message Server of the SAP system running on the Remote Host.
    Abhishek

  • Need file on Application server to be pipe delimited

    Hi,
    I want the file in the application server with headings and pipe delimited... I have used
        IF NOT T_OUTPUT[] IS INITIAL.
    Transfer the changed T_INPUTFILE data to application server.
          OPEN DATASET V_FILEPATH FOR OUTPUT IN TEXT MODE ENCODING DEFAULT
                                                  MESSAGE V_MSG.
          IF SY-SUBRC <> 0.
            MESSAGE I008. " File could not be opened.
            EXIT.
          ENDIF.
    Transferring Data
          LOOP AT T_OUTPUT.
            TRANSFER T_OUTPUT TO V_FILEPATH.
          ENDLOOP.
          CLOSE DATASET V_FILEPATH.
        ENDIF.
    But this is not giving me output like below...
    RefDoc.No.
    Text
    Period
    Year
    9
    Dummy Text
    002
    2006
    How do I get a pipe delimited file on the application server ... ??

    Hi,
    Check this..
    DATA: V_STRING TYPE STRING.
    LOOP AT T_OUTPUT.
    DO.
    ASSIGN COMPONENT SY-INDEX OF STRUCTURE T_OUTPUT TO <FS>.
    IF SY-SUBRC <> 0 .EXIT .ENDIF.
    IF SY-INDEX = 1.
       V_STRING = <FS>.
    ELSE.
       CONCATENATE V_STRING '|' <FS> INTO V_STRING.
    ENDIF.
    ENDDO.
    TRANSFER V_STRING TO V_FILEPATH.
    ENDLOOP.
    Thanks,
    Naren

  • I need information about Application Server Features

    I am looking for detailed information regarding what the Application Server offers and what are the possibilities, both Technichal and Business related. I have looked at the oracle web-site. But information seems to be scattered in multiple pdf and other documents. Is there a better source for the information?
    Thanks

    Hi,
    You can have a look at the Oracle Application Server Concepts 10g Release 2 (10.1.2) - it details the Technical & Business possibilities to a reasonable degree :-
    http://download-west.oracle.com/docs/cd/B14099_19/core.1012/b13994/toc.htm
    Regards,
    Sandeep

  • Why i cannot start sun application server

    I am a new learner to Sun Microsystem's application server.
    I can start the default server yestday, but cannot do it today. I didn't do anything, just switched off my pc last night without stop the default server first. Did me destoried anything? I don't wish the server is so fragile.
    and it gives the message: CLI156 could not start the domin domin1, check the server log
    anyone knows how to slove it?
    thx

    Urm.... i did not do any good thing to it. but it worked again. seems it got temper sometimes

  • Why it need in spring application context if integrated with hiberate

    Dear all,
    in hiberate.xml which has specified the connection data source. I don't understand why the following need to be defined in spring application context.
    Or I have made a mistake that data source connection can be defined in hiberate.xml or in spring application context but not both???
    <!-- Local DataSource that works in any environment -->
    <!-- Note that DriverManagerDataSource does not pool; it is not intended for production -->
    <bean id="dataSource" class="org.springframework.jdbc.datasource.DriverManagerDataSource">
    <property name="driverClassName"><value>${jdbc.driverClassName}</value></property>
    <property name="url"><value>${jdbc.url}</value></property>
    <property name="username"><value>${jdbc.username}</value></property>
    <property name="password"><value>${jdbc.password}</value></property>
    </bean>

    Rchiu5hk wrote:
    Dear all,
    in hiberate.xml which has specified the connection data source. I don't understand why the following need to be defined in spring application context.Your instinct is a good one. "Don't Repeat Yourself" is good advice.
    Or I have made a mistake that data source connection can be defined in hiberate.xml or in spring application context but not both??? I agree with you - I would not put it in both.
    My preference is to put the data connection information into Spring, not Hibernate, and simply refer to the Hibernate configuration in my session factory:
       <bean id="sessionFactory" class="org.springframework.orm.hibernate3.LocalSessionFactoryBean">
          <property name="dataSource" ref="dataSource"/>
          <property name="configLocation" value="classpath:hibernate.cfg.xml"/>
       </bean>That way I can use DriverManager or JNDI for my connection as needed.
    %

  • How can i install application server 10g R2 on windows server 2008

    Dear friends,
    I need to install application server 10g r2 on windows server 2008.
    Is there any patch for this. where can I get those patches?
    plz help.
    Divya Alok

    MKBH wrote:
    Why OracleAS 10.1.3.x version doesn't have OracleAS Infrastructure components?Because not all OAS releases were complete software versions. By complete software versions, I mean they were not a software version where each component (like Identity Management, Portal, BI, SOA Suite, etc.) would have an updated version.
    OAS Release 2 (10.1.2.x.x) was a complete release but OAS Release 3 (10.1.3) was not. After release 2, Oracle Fusion Middleware OFM 11g is now a complete release.
    OracleAS Identity Mgmt (10.1.4) was the updated version of OAS Id Mgmt after OAS 10.1.2 and before OFM 11g.

  • Why we need to use weblogic...??

    I am new to weblogic.....
    can any one please explain why we need to use weblogic ..???

    Do you mean why would you use any application server in general, or specifically weblogic?

  • How to load data from a  flat file which is there in the application server

    HI All,
              how to load data from a  flat file which is there in the application server..

    Hi,
    Firstly you will need to place the file(s) in the AL11 path. Then in your infopackage in "Extraction" tab you need to select "Application Server" option. Then you need to specify the path as well as the exact file you want to load by using the browsing button.
    If your file name keeps changing on a daily basis i.e. name_ddmmyyyy.csv, then in the Extraction tab you have the option to write an ABAP routine that generates the file name. Here you will need to append sy-datum to "name" and then append ".csv" to generate complete filename.
    Please let me know if this is helpful or if you need any more inputs.
    Thanks & Regards,
    Nishant Tatkar.

  • Function module to find the path of application server

    Hi can any one say me what is the function module to find the path of the application server

    Hi ,
    What i understand from ur question is that u need path for application server from the presentation layer i.e user screen.
    u can achive the path this way
    parameter: file type filename-fileintern.
    when user presses F4 here, it will show the directories and path in the AL11.
    I didnt find any FM which will get the path of Al11.
    revrt back if any issues,
    Regards,
    Naveen

Maybe you are looking for