Why we use package seperate folder for creating packages ?

hi
i have two doubts
1) in packages why we put seperate folder for pacage.. for creating the packages...?
2)with out creating the package folder ..is possible to any other way is there ?
thanks !!!

balakrishna.m wrote:
if is it there any option to create one folder..
all packge programs are saved into that folder.. "no need to creating a seperate folders".. ?Here's a suggestion.
Instead of continuing to waste everyone's time (including your own I might add) by repeating the same question in different forms why don't you ask us/tell us about the real problem that prompted this question in the first place.
I would guess that your real issue here is one of the following.
1)
Question: You don't want to have to create 100 folders.
Answer: Get an IDE.
2)
Question: You have actually hit some limit on some filesystem with regards to the number of directories in a directory.
Answer: Rethink your design for starters. It sounds like you have too many packages. You can also look to solve this in alternative ways (like putting the source/classes in different locations and using the classpath appropriately)
3)
Question: You just don't understand what packages are for.
Answer: Read the tutorial
4)
Question: You just don't like packages.
Answer: Tough. Accept it or choose another language.
If your real question doesn't appear above please ask it. But don't ask again if you must create different folders for different packages, that question has been answered repeatedly already.

Similar Messages

Why we use different clearing account for GR/IR and planned cost clearing a

My client ask for using same account for GR/IR account and all planned cost clearing account.
i try to convince it should be different accounts but he needs a logical answer.
Why we use different clearing account for GR/IR and planned cost clearing accounts?

Dear friend.
u just tell him while doing GR it will debited n while doing IR it should get credited.hence we need to take diff G/L account or same account.
regds
nasir

Why was i charged 1 dollar for creating account when it says you wont be charged until you make a purchase

why was i charged 1 dollar for creating account when it says you wont be charged until you make a purchase

It wasn't a charge, rather a "hold" to verify your account. The hold will be released in a day or so.

Create seperate folder for text messages?

Is it possible to create a seperate folder to receive text messages in rather than having text and emails going to the one "message" folder? Since I have an aol icon that receives my emails, I don't see the need for the emails to go to both folders? Any ideas?
Thanks, Cathy
Solved!
Go to Solution.

Try changing your theme . You can also try a battery pull to see if that does anything......
Nurse-Berry
Follow NurseBerry08 on Twitter

Advantages of using a seperate controller for guest access?

Can someone give me a good reason to use a seperate controller in a DMZ for guest users versus just trunking a DMZ VLAN to the controller. Certainly it makes sense to have a guest controller when you DMZ is not accessable to the controller locations (or you have a bunch of remote locations, but only one internet connection), but in the event that the controllers are located in a place that it can hit the DMZ is there a good reason to use a guest controller.

I'm not even sure if that is a good reason. You can alway trunk to another non-routed VLAN and stick a cable modem and firewall to give guest user access. I'm working with someone now that thinks this is the way to go, but I've got to add a 4402-12, a switch (need GB connectivity for the controller) at a minimum. Again, it would make perfect sense if the location of the internet was not in the same building.

Can we use IDOC_INPUT_ Message type for creating and changing the document

Hi,
I have a requirement to create or change the requisition data.
Can I use IDOC_INPUT_PREQCR01 function module for both the purpose.
OR shall I go for custom function module by using BAPI function modules to create or change the data.
Please help me in this regarding.
Answers will be rewarded.
Thank you.
Eswar

Hello Eswar
You could use the IDoc processing function module if you had the data already available in the IDoc specific format (which is unlikely). This would mean you are receiving the IDoc data from another SAP system.
Instead, check the BAPI explorer (transaction BAPI) if you can find an appropriate BAPI.
Regards,
Uwe

Why nokia uses very cheap plastic for N79?

I bought a Nokia N79 for 350 € one month ago. Although my ultimate care and even I used a special protecting case for the phone, there were little scratches all over the front plastic cover. I wonder why nokia used very cheap plastic on the front cover for a very expensive mobile phone?

Volume increases in 10 steps and last step, from 90 to 100% is like someone that suddenly turn a 1000w speaker right in your ear. :-) This is not normal and it was so easy to fix before to sell this phone. Maybe no-one tryed the phone before to sell it.
Album Art search is an automatic procedure from iTunes to Winamp. I don't have to use pcsuite, don't have to download from phone. Btw it doesn't appear, better than an error.
Let me say, about the clock alarm. I'm a doctor. To have something complete to make quick photos to wounds, procedures and so on or make videos, I thought this could be a great phone. I used the phone alarm of this phone only two times and never use it again. I lost a morning appointment and to awake for the night turn. It sound funny now, but let's try to imagine my anger when for years I used a cheaper phone, never getting late. I don't sell nuts, with all of my respect for nuts seller.
Why do I have to use another piece of software when the included one should function? It is like to harvest an arbor because it doesn't give you fruits without trying to think why and look for a solution. Did I give too much water? Is it infested by some bugs?
Symbian UIQ, rest in piece, decided to use Opera Mini as defalt browser. That is a cure. If Symbian OS doen't want to use it has to solve its bugs quickly or send an advice through that stupid My Nokia service saying that browsing experience will not be so easy.
You buy a phone because you don't want a Ferrari. You buy a phone for the specifications write on the box. In Florence, you can't try the phone before, sorry man. It would be really nice but you can't. You buy for radio and radio doesn't work, you buy for camera and shoot button doesn't do auto-focus, (now repaired), you buy for a simple mp3 player and you are going to lose audition, you buy for a phone and thanks God it works . You give every single cents hoping for a positive experience and you change manufactuer because this one gives you - now - what you are looking for. I'm not a SE, Motorola or Nokia fan. I read reviews and compare trying to have an idea. That's what we do, all of us.
I respect your point of view about S60, I am excited about wonderful programs to watch divx - by the way tv-out is choppy, ugly and something to not try if you have an n79; I thought it could be wonderful for my presentation... let's forget it - to do sport and to buy some useful cheap, read the humour, map for Nokia Maps. No, really I know this is a great software, I love open source and hope that will arrive more and better apps when it will be open, but you buy a phone for what's on. Not for what it could do in future with bug fixes. Tomorrow I will sell it and maybe never see that bug fixed.
An example: Apple. IMHO is getting worst that before. I'm not an Apple fan but I have to admit that it knows how to work with software and hardware. It prefeared not to put mms and other functions on its iphone because...
...who knows. The point is: less software to fix means better experience for end-user and quality of firmware releases. With three, or something similar, releases Apple covered many of what the users cryed for in less than two years. Remember, every basic function was at best. Nokia sold n79 and 5800 quite in the same time. Firmware release of n79 was ridicolous, 14 pages of fw after four months? What did you sell it for Nokia? Wait four months more. 5800 is an interesting phone, different from the iphone, full of great features and great bugs.
At the end, I respect your idea of evolution of a phone and its getting better day by day, while I need that a phone is ready to go since first start even with some bug, because noone has no bug, but not ridicolous bugs. That's why Nokia pi22ed me off with this n79.

Why can't a new folder be created within my user home directory when using 'Save As' in Mountain Lion?

Hi,
So I want to create a new folder within my main user home directory (not the root directory) just for my developer-related files? I can do this from Finder, although it does prompt me for my password to do so. However, when using 'Save As' from any app, the 'New Folder' button is greyed out when I select my user home directory. So I have to create the folder in Finder then Save As.
Is this normal behavior? Is OSX discouraging me from adding things to my user home directory by making it less convenient? Is there a good reason it would be discouraging me from creating new folders there? If not, is there a setting that I can change to allow the creation of new folders from the Save As prompt?
Thanks for your help,
B

You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions

Using "Deleted Items" folder for long term storage.

I have a user that is using the "Deleted Items" folder in Outlook for long-term storage. He has unchecked the box in the options which would remove the items in the Deleted Items folder at shutdown
and is having problems with his Outlook freezing up several times a day. He was using a Microsoft Surface as his primary computer and has since changed to a Dell Latitude, but Outlook still freezes up. He has an Office 365 Pro Plus license.
I have been looking for articles to explain all the reasons for not using "Deleted Items" for storage, but in order to get him to change, This is not a .pst, it is the Outlook default “Deleted Items”.
. I really need some "ammunition" to let him know the consequences of keep that much mail in Deleted Items.
Could you tell me when Outlook starts, does it enumerate the Deleted Items folder as it does the Inbox?

I have to agree with Robert's point here. The question of whether or not the user should be doing this answers itself: of course he shouldn't. On a lighter note there's a Dilbert cartoon from 2003 which covers this very point:
http://dilbert.com/strips/comic/2003-11-13/
I'd suggest you ask him to create a sub-folder of his inbox and get him to move everything over, then he still has his history and can use deleted items the way it was intended.
The question I would ask is are you sure that this has any bearing on his Outlook freezing issue? I have encountered people who never empty their recycle bin and I have encountered issues with Outlook freezing, but I don't recall ever having the two together.
If you still have issues after he's moved everything then it's a general Outlook freezing issue, so you have to look at those sort of things. For a start, is it bang up to date with Microsoft Updates? If so how big is his mailbox? Presumably he has an ost
file, so how big and fragmented is that? I'd probably try creating a new Outlook profile. If not then what add-ins does he have, could they all be disabled for a while to see if it's one of them, then add them back one at a time? If not is it worth running
a repair in Office? I've had that fix a fair few issues.
Just a few thoughts. I don't know if any of them will help.

How do I use one downloads folder for multiple users?

I recently added my girlfriend a profile in my Imac. We both have seperate Profiles and logins however I would like to find out, if the the Downloads folder can be used by both profiles. I found that each profile has their own Downloads folder, and goes to their own locations.
I would like to find out, if its possible to re-direct my downloaded files as well as her downloaded files into just ONE "Downloads" folder. The default destination of the downloads folder would be /users/girlfriend(name of girlfriend). I want to change it to /users/(me) so that all downloads would just go to one folder.
Thanks in advance!

Direct your downloads to Users-Shared

How to use a single page for create and update mode.

Hi,
I need to develop a single page to be used for both create and update modes.
I am going to use a variable MODE
and i will set this in the emp summary page.
Based on the button clicked by the user i have to render the JSF page.
For tis if the user selects a perticular and cliks on update thn i will pass the empno to the next.
so there in the next i will appy a ViewCreiteria on my View Obj to fetch only that row so that only that emp will be displayed ion update mode.
This is working fione for me.
So now the issue is
when the user clicks on CreatEmp button.
i need to enable my VO for insert operations.
for this i wrote the code like this in the beforePhase event
FacesContext ctx = FacesContext.getCurrentInstance();
ValueBinding valBinding = ctx.getApplication().createValueBinding("#{data}");
BindingContext bContext = (BindingContext) valBinding.getValue(ctx);
DCDataControl dcControl = bContext.findDataControl("DataControl");
Application app = ctx.getApplication();
ApplicationModule am = (ApplicationModule) dcControl.getDataProvider();
System.out.println("After Appmodule initiation");
// get the VO reference and initiate the query
System.out.println("Before Page VO initiation");
PrismDmPageSectionViewImpl vo = (ViewImpl)am.findViewObject("View");
//ViewRowImpl row = (ViewRowImpl) vo.createRow();
/* TO CREATE AN EMPTY ROW*/
Row row=vo.createRow();
System.out.println("New Row is created");
//vo.createKey(row);
vo.insertRow(row);
vo.setCurrentRow(row);
By doing this a new empty page is rendered.
But when i fill up the values and click on ok.. i am getting the error like this..
JBO-27023: Failed to validate all rows in a transaction.
JBO-27027: Missing mandatory attributes for a row with key null of type View3
JBO-27014: Attribute Id in View3 is required
JBO-27014: Attribute PageeId in View3 is required
Please point me out where i am missing.
Thanks

Hi,
In my opinion you are over complicating things.
This is what I do for using the sme page as both create and update without all this code.
1) Create a browse page containing a an adf table with a select one component bound to your view object.
2) Create an additional edit page containing only an edit form containing fields of your view object that your users must enter in order to add or edit rows.
3) Link the pages in the JSF diagram with an "edit" navigation case from browse to edit page and a "return" navigation case from edit to browse (make sure that redirect option is NOT set on both cases)
4) Remove the submit button from the edit page and add two application module bindings for the commit and rollback operations as command buttons in the form footer facet. Make sure that both buttons has an action of return and that their disabled property is set to false. You will probably change their labels to ok and cancel respectively.
5) Drop a create action for your view object from the data control palette inside your page as a command button and set the action property to edit also.
3) Set the action property of the view button to edit
This should basically work without any code from your part. -- at least it does so for me -- if you like to make it a bit more funcy you may add am action listener inside your buttons and set a requeScope variable for example #{requestScope.editing} to true or false depending on the button clicked. Then add a title to your page with a value like #{requestScope.editing == true ? 'Editing record' : 'Adding a new record'}..
Hope that helps.
Thanassis

Using acrobat pro 9 for create web publication

I have seen a few publication for that I would like to do but not sure how to. Here is a example for what I’d like to create: http://www.bluetoad.com/publication/?i=6845
I have acrobat pro 9 and in-design. Basically I have a 28 page publication that I know how to save as a pdf, would but like take it, after it is in acrobat, and save as a web publication. I have using iWeb for my web authoring program. Well if anyone would look that link about, I this I like to know to do. Not even sure in it can to done in iWeb. If not and there is another way that would be great as well.
Thanks

You didn't forget to Advanced menu and set Reader Rights.Once you do that then, they can save and send back to you.

Difference in using EC02 and OX10 for Creating new plants

Hello experts,
I would like to know the impact of using both the transactions
Thanks
Imraan

Dear mimraan70,
EC01 is used for organization structure,here one compay code how many plants you assigned and how many purchase organizations assigned like you do here
were OX10 is changing address and creating new plants etc,but in EC01 we cant create plant
Hope this may helps you
Prem.

Hi I'm trying to find a simple bit of freeware that I can use to image map for creating hotspots on a website. Any ideas?

Hi
I'm wanting to create a pretty complicated image map for a web page so it'll be lot's of polygons. Does anyone know of a good bit of freeware I can use that will help me work out the coordinates for the image maps?
Thanks
Neil

You could do this in any text or html editor.t I imaging you want a click and drag capability when selecting the areas of the image map. Try looking at some of these. https://www.google.com/search?q=image+map+create+apple+mac

How do I use the links folder for bookmarks the same as in IE?

Until today I was using IE8. In the bookmarks there is a folder named "Links." These would display across the top of the screen like a toolbar (with subfolders acting as dropdown menus.) I want to set this up the same way in FF. Is there a setting/toolbar/addon/... to accomplish this?

It is called the Bookmarks Toolbar in Firefox. <br />
https://support.mozilla.com/en-US/kb/Bookmarks+Toolbar

Why we use package seperate folder for creating packages ?

Similar Messages

Maybe you are looking for