Why weblogic AdminServer process stopped when i close putty session?

I starting AdminServer in background and when i closed putty session, AdminServer stops. Do i need tune any settings?

not sure if this is your scenario, but I have observed that if you start either the admin server or a managed server via putty in the background (including if you use nohup), the started process will usually die if we close putty by simply closing the window (i.e. clicking the "x" of the putty window). If you make sure you exit completely from your shell in putty (ctrl-d until the shell no longer responds) and then close the window, the process remains running as expected (for me this is observed behavior for starting WL processes via Putty on RHEL3, RHEL4, and RHEL5.
If you are not doing so, it is good practice to use "nohup" if you are starting a background task on Linux from putty. nohup disconnects the calling terminal from the application so there are not ties of stdout/stderr to the shell created by your putty session.

Similar Messages

  • Why are all my tabs lost when I close my session?

    Recently got a new computer and downloaded Firefox, but it isn't like the version I'm used to - there's no tab groups, and when I close my session I lose all the tabs I had open. I have Windows XP and Mozilla Firefox v 6.0.2 - is that the wrong version? Also, I tried to find a setting to save tabs in the Options menu, but didn't see anything.

    Why in HELL didn't Firefox tell us about this ridiculous "new" way to restore previously opened tabs?? Good Lord, give us the info window again, or at least have the option to put a 'button' to click to restore.

  • I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.

    I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.

    Put your phone in DFU mode,
    Hold the Power Button (3 secs)
    Continue holding the power button and also hold the home button (15 secs)
    Release the power button while continuing to hold the home button (10 secs)
    Your device should prompt with the "Connect to iTunes Screen"
    Restore.

  • When I open Mail the fans start up and only stop when I close it. This started about 2 days ago. In addition, Safari is often very very slow. What to do?

    When I open Mail the fans start up and only stop when Mail closes. This began two days ago.
    Previous to that I never had any problems with Mail; but Safari has been very slow on occasions. I don't know if the 2 pbs are linked.

    You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox Profile Folder that store session data.
    Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    *http://kb.mozillazine.org/Multiple_profile_files_created

  • Why does video out stop when ipad screen locks?

    Why does video out stop when ipad screen locks?

    Thanks.  I should have been more specific.  I am watching using video out cables to the TV, and would like to watch the entire episode without unlocking the screen every five minutes.

  • After downloading InCopy I click on the downloaded file to install, but the process stops when trying to connect with server and doesn't carry on.

    After downloading InCopy I click on the downloaded file to install, but the process stops when trying to connect with server and doesn't carry on. Can you please help?
    Thanks,

    Agathe.texier which copy of InCopy are you downloading and installing?  Do you receive any specific error messages?  Finally what operating system are you using?

  • Why my Apple ID stopped when I buy and why the supporter can't help and why they don't reply to any email I send

    Why my Apple ID stopped when I buy and why the supporter can't help and why they don't reply to any email I send so what should I do in this moment I need guide and help so as a request please reply me back  Thanks ....

    As I said in my above reply we are fellow users, we won't know why your account is disabled.
    You might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
    You might then need to log out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then log back in so as to 'refresh' the account on it.
    If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • Why my iTunes re-open when i close it?

    Sorry for my bad english.
    do not know why but my iTunes is opened again and again when I close it.  how I could solve this problem????  pls i need help with this is very annoying.
    Thanks.

    What happens when you try to open it?

  • Why Acrobat Pro XI stops when I open a pdf with post-it?

    Hello,
    Acrobat PRO XI stops when 1 hopen a pdf with comments (post-it) or when I go to preferences.
    Does anyone know why and he knows a solution?
    Thank you for your information.
    BR
    Mac i7 • OS 10.6.8

    Hello,
    Thank you for your reply.
    The Acrobat XI PRO is 11.0.07.
    Post-it : Sticky comments.
    BR
    Mac i7 • OS 10.6.8
    Acrobat XI PRO : 11.0.07

  • Why objet is not stopped when page change

    Hi,
    I'm currently working in my company on a library.
    A have created a class to display ads in a webrowser. A request is executed every 20 seconds.
    I display the ads in a panorama page
    but when i go to a detail page my banner continu to do request.
    The object isn't destroyed when the page change ?
    And if not how can i resolve it ?
    Thank you

    No. You should call the stop method on that timer to ensure it stops when you want it to.  It sounds like there's a handle somewhere on that timer that hasn't been released (perhaps via page caching) so that's why the timer hasn't gone out of scope.
    Ignoring the obvious solutions makes your programming life more difficult.
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with
    undefined objects and unknown namespaces.

  • Why are cookies not deleted when I close Firefox?

    Hey,
    My problem is that I set Tools / Options / Privacy / History to "Use custom settings for history", and then under cookies I set Keep until: to "I close Firefox".
    Yet, when I close my browser and restart none of the cookies are deleted. If I save my tabs, I stay logged in on the websites that are open on the saved tabs. But even if I close the website, and then quit. And then reopen the website after launching Firefox again, I am still logged in. Whereas Firefox is set not to remember any of my usernames or passwords, so the only way this can happen is via cookies. Therefore, the cookies are not deleted. But I can also see it in the list of cookies: it's full of old stuff.
    So why are cookies not deleted despite this setting?
    Firefox has beeen pretty soft on privacy lately, and frankly I don't understand why. The possibility to have history older than X days automatically deleted has also been gone for a long time, and now this cookie setting doesn't work, either.

    Hi madperson,
    I turned this setting on a long time ago. Basically, it's one of the first things I do after installing my OS and Firefox. So there shouldn't be so many old cookies there.
    But anyways, just now I deleted all the cookies manually via Tools / Options / Privacy / Show Cookies / Remove All Cookies to be sure that all the old stuff is wiped out. And yet it still doesn't work.
    I logged in to my Gmail account (the Remember Me box ain't checked), closed the tab containing my Gmail account and then closed Firefox. After that I verified in the Task Manager that firefox.exe is indeed not running anymore. So Firefox definitely shut down properly. Then, I restarted Firefox and opened a tab, entered gmail.com, and I was still logged in, therefore the cookies were not deleted.
    I have the 10.1.101.000 version of ZoneAlarm, which as it turns out after googling it is indeed not the latest version (it was released in March 2012). The ZoneAlarm Firefox add-on that automatically comes with the firewall is disabled in Firefox.

  • Why do pinned apps disapear when I close firefox.

    When you right click on a tab, you have to option to save the tab as an application. When I have pinned some tabs they can be seen on the left of the toolbar. When I close down it just reminds me that I am closing multiple tabs. When I reopen firefox the pinned apps that I saved have disapeared. They used to work ok but now don't. Also in previous versions of Firefox when you were closing down it used to ask if you wanted to keep the open tabs for next time. This dosn't happen anymore. I thought it was a usefull feature.
    Best regards
    Tom porritt.

    App (pinned) tabs and Tab Groups (Panorama) are stored as part of the session data [1] in the file sessionstore.js [2] in the Firefox profile folder [3].
    Make sure that you do not use "Clear Recent History" to clear the "Browsing History" when Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
    * https://support.mozilla.com/kb/Clear+Recent+History
    * [1] http://kb.mozillazine.org/Session_Restore
    * [2] http://kb.mozillazine.org/sessionstore.js
    * [3] http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox
    It is also possible to use the "Show my windows and tabs from last time" setting, that is usually a more reliable way to restore session data.
    * [http://kb.mozillazine.org/Menu_differences Firefox/Tools > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

  • Kinect v2 stops when leaving a RD session

    Hi,
    I have a Kinect v2 running on some remote PC. When I access this PC with Remote Desktop, the Kinect stops when I leave the RD session. Both white lights on the front of the Kinect go off and no more image can be obtained from the Kinect.
    I can reproduce this issue with any sample from the Kinect v2 SDK.
    Funny thing is, it does not do this when using TeamViewer. It only does this when using Remote Desktop.
    For now I can use TeamViewer, but once my program is deployed in the field I will be forced by my clients to use Remote Desktop so I absolutely need a solution that works with RD.
    Thank you.

    gm310509 wrote:
    So how or why would I get a different class loader?
    This problem occurs when I redeploy my app, but why would Glassfish suddenly use a new classloader?
    Wouldn't tomcat (my servlet environment) do the same thing when the application is redeployed? But I don't get the error in tomcat (when using the application context.ah, that explains a lot. many app servers deploy each deployment in its own classloader. they do not attempt to "reuse" classloaders for redeployed applications (each app gets it's own context, even if it is conceptually the same app). tomcat may not use separate classloaders (i've never used it directly). i know jboss does this, and i'd guess glassfish does as well. in this case, when you redeploy, your old instance from your previous deployer is still in jndi, but your deployment is in a separate classloader, so instanceof does not work.
    Alternative suggestions are appreciated, but this question is primarily about why the instanceof operator is apparantly "not working" correctly.When you are working in an app server, you really do not want to do things like this (have services as static instances). this code really should be a JMX MBean, it's what they are designed for. you mbean would run within the lifecycle of your deployment and this problem would go away (you can have start() and stop() methods which would be invoked at the correct time in your deployment's lifecycle). plus, you can add methods which can be invoked externally using the JMX framework to retrieve your gathered statistics, change the behavior of the monitor, etc.

  • Why does play stop when I close the Podcasts app - IOS 6

    Whenever I leave the Podcasts app to answer an email, text, open Safari, etc., the podcast stops playing.  This effectively stops me from using any other application on my phone, unless I want to also stop listening to the podcast.  It won't continue playing in the background like the Music app did.  Of course, this is an IOS 6 issue.
    Ridiculous!!!
    Am I missing something here?

    I had the same problem the first night and my head almost exploded as playing podcasts is what my iphone is doing 95% of the time. I was also experiencing a lack of control not being able to jump back or ahead which was maddening. However, the next morning, after syncing the phone with my iTunes (on a MacBook Pro) all of this functionality was there, including the ability to have the podcasts continue when exiting the app and the ability to control them with an inline remote on my earbuds.
    Hopefully, this problem has already resolved itself for you. Unfortunately, it is my understanding that there still is no option for playlists at this time.

  • Why does a LaunchDaemon stop when user logs out?

    Hi,
    We have an application that uses an older version of Jetty that I am trying to configure as a LaunchDaemon on OS X 10.7.5
    I've created a org.mortbay.jetty.plist and placed this in the /Library/LaunchDaemons, set permission 644 and owner root:wheel. This can be loaded via launchctl and all is happy. I can connect to the server and browse the pages on the server. However, if I log out, the service stops responding and only starts responding when I log in again. It appears to stop jetty and then restart it when I log in.
    As this is being run as the root user, I would not have expected a user logout to stop this process. From what I can see there are no per-user overrides for this.
    Upgrading Jetty is not currently an option.
    Any help/ideas would be appreciated.
    Dave
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
        <dict>
            <key>Disabled</key>
            <false/>
            <key>Label</key>
            <string>org.mortbay.jetty</string>
            <key>ServiceDescription</key>
            <string>Jetty 5</string>
            <key>RunAtLoad</key>
            <true/>
            <key>KeepAlive</key>
            <true/>
            <key>EnvironmentVariables</key>
            <dict>
                <key>JAVA_HOME</key>
                <string>/Library/Java/Home</string>
            </dict>
            <key>WorkingDirectory</key><!-- required! -->
            <string>/usr/local/myApp/Jetty/extra/OSX/</string>
            <key>ProgramArguments</key>
            <array>
                <string>/usr/bin/java</string>
                <string>-Djava.io.tmpdir=/tmp</string>
                <string>-Djetty.port=2000</string>
                <string>-Djetty.home=/usr/local/myApp/Jetty/</string>
                <string>-Djetty.logs=/usr/local/myApp/Jetty/logs/</string>
                <string>-d32</string>
                <string>-jar</string>
                <string>../../start.jar</string>
                <string>/usr/local/myApp/Jetty/jetty.xml</string>
            </array>
            <key>UserName</key>
            <string>root</string>
         <key>StandardErrorPath</key>
         <string>/tmp/launchd_myprogram_stderr.log</string>
         <key>StandardOutPath</key>       
         <string>/tmp/launchd_myprogram_stdout.log</string>
          </dict>
    </plist>

    Thought I had an answer...but no.
    Maybe this reference will help:  Daemons and Services
    Message was edited by: g_wolfman

Maybe you are looking for

  • Executing a Job via Web Services using a Server Group?

    When executing a job from Designer or from the Management Console you have the option to select a specific job server or a server group. But when executing a job via Web Services it uses the first job server with which the repository was associated (

  • Mail 8.1, attachments in outlook are showed with ATT00001.htm files

    At my work I use Mac and Mail 8.1 app. Everyday I send attachments to Outlook users and they see with attachment files ATT00001.htm. If I send 10 attachments outlook users see 20 attached files - 10 of them trash files like ATTxxxxx.htm. Before upgra

  • Panasonic PV-GS250 used to work great with my MAC

    In 2007 I purchased a a Panasonic Digital Camcorder (PV-GS250) and it worked like a dream with my Macbook Pro. Purchased an IMAC (Oct 07) with Leopard OS, the dream continued for both. I hadn't edited for a while and had a new project I was working o

  • SCE not updated customs duty,cess,hcess, eventhough in material inforecord

    Hi, We have maintained Standard cost for all materials and material ledger is not active. Due to this freight,clearing charges,cst,VAT non deductable,packing and forwarding and customs all these amounts were going into purchase price variance account

  • Flash Template Modifications for Character Font

    I have a modest understanding of Flash as I had developed a website last year.  It has been about nine months since I've opened the tool.  Recently my girlfriend had asked me to develop a website for her personal business.  Yesterday I was browsing t