Why were no attributes in the Error received from Adapter Framework (AF)?

Hi All,
We have a local processing scenario where we use the Integration Configuration through Advanced Adapter Engine to download attachment using Sender Mail Adapter from Lotus Notes Mail and Upload the file attachment into an FTP using Receiver File Adapter. As part of our testing we deliberately set the Sender Mail Adapter to produce error by changing the configuration like setting a wrong URL to simulate downtime on Lotus Notes.  The error shows up in the RWB CommChannel and an error record is received from AF to send Alert.  When the alert tries to find the alert rule it is unable to do so because the condition (Component, Interface and Namespace) values are empty "*Find rule for (From:::: To::::)" This is from the report SXMSALERT_LOGREADER.
The (From:::: To::::) should contain the Sender Component, Interface and Namespace as FROM, and Receiver Component, Interface and Namespace as TO but they are not picked up from the Mail Adapter because there are no message/payload yet but I am expecting at least the Component to be included.
The result of the empty (From:::: To::::) will be a "*No matching rule found" and no alert is sent.
Do anyone had the same issue?  Is this a possible bug in PI?
Please let me know if you need additional detail.
Regards,
Orlando

Hi Orlando,
When the sender channel reads any message, it would be able to determine the Sender service, Interface and namespace from Sender agreement. It is not dependent on the payload.
To generate the alert for such, you can modify the alert rule to check only for the Sender serice, interface and namespace.
Hope this helps.
Regards,
Sanjeev.

Similar Messages

  • SSRS in SharePoint2013:Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModule

    SSRS in SharePoint2013: There is a report in SharePoint and it contains a sub-report and the sub-report hyperlink. When I click the hyperlink to go to the sub-report, after >10min, I click the "Back to.." button
    on IE to go to the previous page. Then it catch the error as:
    Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled.
    Details: Error parsing near '
    <!DOCTYPE html PUB'.
    I am using SQL2012 and Sharpoint2013.

    Hi Alisa,
    Thanks for your reply, I changed the web.config, but the issue did not resolved. 
    I add the codes in two parts of the web.config as below, you can find in by keywords “aspnet:MaxHttpCollectionKeys”
    This issue can not reproduce on Chrome only occur on IE.
    So, do you have some details suggestion for me to fix it?
    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <configuration>
    <configSections>
    <sectionGroup name="SharePoint">
    </sectionGroup>
    <location path="_layouts/15/TA_AppMonitoringDetails.aspx">
    <appSettings>
    <add key="ChartImageHandler" value="storage=memory;timeout=20" />
    </appSettings>
    </location>
    <location path="_layouts/15/ReportServer/RSViewerPage.aspx">
    <appSettings>
    <add key="aspnet:MaxHttpCollectionKeys" value="10000" />
    </appSettings>
    </location>
    <system.net>
    <defaultProxy />
    </system.net>
    <appSettings>
    <add key="aspnet:MaxHttpCollectionKeys" value="10000" />
    <add key="aspnet:RestrictXmlControls" value="true" />
    <add key="FeedCacheTime" value="300" />
    <add key="FeedPageUrl" value="/_layouts/15/feed.aspx?" />
    <add key="FeedXsl1" value="/Style Library/Xsl Style Sheets/Rss.xsl" />
    <add key="ReportViewerMessages" value="Microsoft.SharePoint.Portal.Analytics.UI.ReportViewerMessages, Microsoft.SharePoint.Portal, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
    </appSettings>

  • Why do I keep getting the error code 148:3 when I try to start Fireworks CS4?

    Why do I keep getting the error code 148:3 when I try to start Fireworks CS4?

    I just reinstalled Fireworks CS4 and it seems to be back to normal. Thanks

  • Why won't Apple activate the FM receiver feature of the Broadcom  BCM4335 chip?

    Why won't Apple activate the FM receiver feature of the Broadcom  BCM4335 chip?
    I paid for it, it uses less energy, less bandwidth, during emergencies, we would have radio access & FEMA would like it activated.
    I asked an Apple tech on chat and they said there is no FM capability on the phone.  I asked if my iPhone has a Broadcom chip and they ended the chat.  I had to give them my phone number twice, but they never called back with me back to answer the question.  According to NPR the chip is activated in other countries.

    could it be because the iphone6 don't have an Broadcom  BCM4335 chip?
    http://www.chipworks.com/en/technical-competitive-analysis/resources/blog/inside -the-iphone-6-and-iphone-6-plus-part-2/
    https://www.ifixit.com/Teardown/iPhone+6+Plus+Teardown/29206

  • RDS 2012 The WinRM service failed to create the following SPNs: Additional Data The error received was 1355

    Hi,
    I have RDS 2012 session deployment in Azure with connection broker high availability.
    The "Remote Desktop Management" service does not start automatically when the connection broker virtual machines are stopped and started.
    I see the below error in event logs of both the connection broker VMs
    Note: WHen i manually start the "Remote Desktop Management" service after this error, it all works without issues.
    I get 
    Error ID 46 - Crash dump initialization failed!
    Warning 10154 - in Microsoft-Windows-Windows Remote Management
    The WinRM service failed to create the following SPNs: 
     Additional Data 
     The error received was 1355

    Hi,
    Thank you for posting in Windows Server Forum.
    In respect to error 46, this issue may occur if the computer boots without a configured dump file. The default dump file is the pagefile. During a clean Windows OS installation, the very first boot will hit this condition as the pagefile has not been set up
    yet. 
    To resolve this issue, you may want complete the paging file configuration.
    More information:
    Event ID 46 logged when you start a computer
    http://support.microsoft.com/kb/2756313/EN-US
    In regards to error 10154, you need to create the SPN specified in the event using the
    setspn.exe utility and also need to grant the “Validated Write to Service Principal Name” permission to the NETWORK SERVICE.
    For more information refer beneath articles.
    Event ID 10154 — Configuration
    http://technet.microsoft.com/en-us/library/dd348559(v=ws.10).aspx
    Domain Controllers Warning Event ID: 10154
    http://srvcore.wordpress.com/2010/01/02/domain-controllers-warning-event-id-10154/
    Hope it helps!
    Thanks,
    Dharmesh

  • The Data Received from the server running AD RMS didn't match the expected format.contact your system administrator for further investigation.

    Hi All,
       We Have implemented AD RMS in our organisation recently.But the Problem we are facing here many users those are Ms office 2013 we will get the error"The Data Received from the server running AD RMS didn't match the expected format.contact
    your system administrator for further investigation." and those who are in Ms office 2010 Professional it says  
        "The service is Temporally unavailable.Ensure the you have   connectivity to this server.This error could be caused if you are working offline.Proxy setting are preventing your connection or intermittent network issue."
      Below are the workaround did,
    1.Able to reach to Our pipeline ADRMS cluster.
    2.We have a valid Certificate.
    3.if we type https://adrms.ourdomain.com its working fine.
    4.Manually put the registry setting for effected computers.
    5. Applied the Hotfixes:MicrosoftFixit50903,KB2627273.
       Kindly help or suggest us to resolve the above issue as many computers in domain are not working with IRM.
    Thanks and reqard,
    Mohammed Siddiq.

    Hi Mohammed,
    Were you able to fix the issue with CRL disablement?
    Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

  • CLI0615E  Error receiving from socket, server is not responding.

    We recently changed a web application using DB2 5.2 tables from ODBC to JDBC. We are using the COM.ibm.db2.jdbc.net.driver. We are using a
    connection pool and running on iPlanet.
    We are getting intermittant "CLI0615E Error receiving from socket, server is not responding errors". We have looked in the JDBC forum and DB2 support and cannot find a reasonable answer to this problem. It is NOT always on sql statements that take a long time to execute, so I don't think it is a timeout issue.
    I read something about "stale connections". Does anyone know how to check to see if this is a problem?
    When we first converted the app, we had a lot of problems also with "invalid handle or statement is closed" which we have determined was being caused by the user submitting the page again before it had time to finish the first time. We have put in javascript code to prevent multiple submits. Could this server not responding problem be caused by double submits that we have not located yet?
    The error is NOT occuring on any one page, and the same page will run correctly once and the next time throw this error.
    Any suggestions would be greatly appreciated.
    Thanks.
    [29/Apr/2003:11:00:20] info (42196): COM.ibm.db2.jdbc.net.DB2Exception: [IBM][JDBC Driver] CLI0615E Error receiving from socket, server is not responding. SQLSTATE=08S01
         at COM.ibm.db2.jdbc.net.SQLExceptionGenerator.throwReceiveError(SQLExceptionGenerator.java(Compiled Code))
         at COM.ibm.db2.jdbc.net.DB2Request.receive(DB2Request.java(Compiled Code))
         at COM.ibm.db2.jdbc.net.DB2Request.sendAndRecv(DB2Request.java(Compiled Code))
         at COM.ibm.db2.jdbc.net.DB2RowObject.next(DB2RowObject.java(Compiled Code))
         at COM.ibm.db2.jdbc.net.DB2ResultSet.next(DB2ResultSet.java(Compiled Code))
         at bom.Bom.getDefs(Bom.java(Compiled Code))
         at jsps.bbapps._eng._ENGJGLT0_jsp._jspService(_ENGJGLT0_jsp.java(Compiled Code))
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:897)
         at com.iplanet.server.http.servlet.NSServletRunner.Service(NSServletRunner.java:464)

    hi,
    lemme try to tell u what i thinkk..i dont think its' a solution
    Usually this error code means that there was some problem while the driver tried establishsing a socket connection to the remote server. You could very well avoid this by tracking out what is preventing the socket connection.. it may be network congestion or some other onfiguration problems with the network, or with the DB2 server...
    But if the same application could work perfectly with jdbc-odbc driver in same environment,then it needs some attention.either the ibm driver isn't throwing the error as expected by the iplanet or iplanet isn't acting as needed when such an error is thrown.
    contact them and they may provide and explanation..
    wishes,
    Jer

  • ORA-19511: Error received from media manager layer, error text:

    Dear Concern,
    When I am restoring the oracle 9i database by brtools for SAP ECC 5.0 the following error message appeared. Mention that, this is second time restoration. First time restoration was successfull. After that one of us change some permission in differerent folders and files in the hp-ux server. Now we facing the following problem. Please help me...
    BR0449I Restore mode: ALL
    BR0419I Files will be restored from backup: bechtawc.fnr 2010-01-08 20.00.06
    BR0416I 100 files found to restore, total size 520901.781 MB
    BR0424I Files will not be decompressed
    BR0421I Restore device type: rman_util
    BR0280I BRRESTORE time stamp: 2010-01-19 16.19.21
    BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRRESTORE:
    BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
    BR0257I Your reply: 'c'
    BR0259I Program execution will be continued...
    BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
    BR0554I Starting restore from full database backup using RMAN...
    BR0278E Command output of 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog':
    Recovery Manager: Release 9.2.0.1.0 - 64bit Production
    Copyright (c) 1995, 2002, Oracle Corporation.  All rights reserved.
    RMAN>
    RMAN> connect target /;
    connected to target database: PRD (DBID=1654880374)
    using target database controlfile instead of recovery catalog
    RMAN> *end-of-file*
    RMAN>
    host command complete
    RMAN> 2> 3> 4> 5> 6> 7> 8>
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of allocate command on sbt_1 channel at 01/19/2010 16:19:24
    ORA-19554: error allocating device, device type: SBT_TAPE, device name:
    ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
    HP-UX Error: 8324: Unknown system error
    Additional information: 7110
    ORA-19511: Error received from media manager layer, error text:
       SBT error = 7110, errno = 8324, sbtinit: internal error - invalid argument(s)
    RMAN>
    Recovery Manager complete.
    BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
    BR0279E Return code from 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog': 1
    BR0536E RMAN call for database instance PRD failed
    BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
    BR0556E Restore from full database backup using RMAN failed
    Best Regards
    Wahid

    Hi,
    It is mentioned that I already have done a restoration and recovery first time. But when I tried to do the same job I mean restoration in second time for a specific requiremnt I am getting the above error.
    Our syestem info is:
    DB: Oracle 9i
    OS: HP-UX
    Storage: EMC storage
    Backup tools: Data protector 5.5
    Please help me.
    Regards
    Wahid

  • I have upgrade ios 6 to ios7 on my iphone 5.  I do NOT like it.  I want to come back to the previosu version.  why is it so complicated.  Why can I not find the instruction strait from apple? This is the worst possible upgrade ever.

    I have upgrade ios 6 to ios7 on my iphone 5.  I do NOT like it at all.   I want to come back to the previous version.  why is it so complicated? Why can I not find the instruction strait from apple? This is the worst possible upgrade ever.  It make me think of when ericsson got sold to Sony....drastic PC change.
    I would like to have simple instruction on how to downgrade.
    It feel like a change that I did not ask for , ok I push the upgrade buttom, but really this is the worst update aver!
    HELP!

    iPhone User Guide (For iOS 7 Software)Sep 20, 2013 - 23 MB

  • How can I Fetch the error message from a OAF page

    Hi,
    A confirmation message is coming on the page,I want to catch the error message and depending on its value want to add some validation.
    Is that possible to fetch the error message from the page?

    is it a confirmation message or an error message ?
    Code in the OAF page would be raising an OAException with a message name defined in message dictionary.
    you would need to look at the code to understand where this is thrown from and add your validation there.
    Tapash

  • MM - Daily Report of the materials received from other plants

    Hello
    I want  the daily report of all the materials received from other plants i,e by stock transfer. Is there any way to get this information from the standard reports
    regards
    Ravi Pal

    Dear Prashant
    i checked with this transaction but the problem is that this gived the report for only the GR taken against STO with SD Delivery i,e with or with out billing. the system is not picking the STO with MM delivery whan we enter the supplyiny plant as u said
    pl check this
    thnaks
    regards
    ravi pal

  • NewLine Character in the String received from Interactive Adobe Form

    Hello Experts,
    Following is the issue we have with interactive Adobe Form
    We have a text area within the form. User enters the text in multiple lines in this text area.
    We are calling a backend function module designed in SE37 that accepts and process the data from the adobe form.  We are also processing the string data user enters in the text area.
    When we receive the string from the form, the newline character within the string is displayed as '#' in the debugger. We tried splitting this string using cl_abap_char_utilities=>newline and cl_abap_char_utilities=>cr_lf  but NO luck. Though in the debugger we see cl_abap_char_utilities=>newline  as '#'  in the debugger and also '#' is present within the string, for some reason when string is processed to find cl_abap_char_utilities=>newline, we can find/locate it.
    Because ABAP code is not able to identify the newline character within the string received from Adobe form, we are not able to maintain the formatting of the string as it was entered in the form.
    Any help to resolve this issue is appreciated.
    Thanks in Advance.
    Regards,
    Bhushan

    Hi Bhushan,
    I was going through your issue, and I feel this is something you can do with scripting. Basically you should read whole string and find the new line character and replace with a space or comma, as per your requirment.
    Do like following:
    In the exit event of the field select java script and write following code:
    var strng = this.rawValue;
    strng.replace(/\n/g, " ");
    above im reaplcing new line with a space.
    I think it should work I have not tested it. Pls update if you test it .
    Regards,
    Ravi.D

  • Remove the Error log from Order screen

    Hi,
    We are getting error below while order creation from webshop (B2C implementation)
    "No Connection could be made to IPC" This error comes when IPC down. And cleared the error also to IPC stop/start and done the price calculation successfully to using "Update" technique.
    But, still that error log is there in CRMD_ORDER screen in error logs area (red color button). How to clear/remove this error from this screen?
    Please any one help me out on this...
    Thnx,
    Suriya.

    Hi Suriya
    Prakash is right, if you want to delete the error message from the existing doc, please follow waht he said.
    But there is a possibility that you get run-time errors when you edit the same again. The document with error was created with a config in place. Now if you change the config, this will not change the existing docs but will change the documents from now
    As Prakash suggested do the error deletion process in test mode or Sandbox, then see if you get any Runtime errors, otherwise
    I would suggest
    try deleting the one the inputs like item and other stuff on the document. this should take the error off. Please let me if this works,
    Dont forget points

  • HT204088 Why can't I see the purchase history from the ipad? I mean, I can buy apps and in game content directly from my iPad, but I have have to install iTunes on my PC to see the purchase history? What kind of deal is that?

    Why can't I see the purchase history from the ipad? I mean, I can buy apps and in game content directly from my iPad, but I have have to install iTunes on my PC to see the purchase history? What kind of deal is that?

    Welcome to Apple Communities
    You don't need to install iTunes for the purchase history. You can see it in your iPad (iTunes > Purchased), but you need to install it if you want the order numbers

  • Why does iPhoto not recognize the .jpg pics from a Kodak C875 now? I can stick my memory card in the iMac and import them that way, but iPhoto will not import the pics from the camera.

    Why does iPhoto not recognize the .jpg pics from a Kodak C875 now? I can stick my memory card in the iMac and import them that way, but iPhoto will not import the pics from the camera.

    There have been many issues reported with Kodak cameras - serach the forums for them
    Actually the best practise is to use a card reader to import your photos, verify that they are imported ocrrectly and wait at least one backup cycle and then use the camera's format command to reformat the card and erase it - this assures no lost photos and always having the card properly formatted
    LN

Maybe you are looking for