Why when i change mask from 2d to 3d it change position on timeline seconds ahead?

Please help, i dont know why i have this problem

This is a simple 3D camera track but there are dangers. First, you must make sure that the 3D camera tracker is not tracking the person walking through the frame. Second you must know the exact frame where the person is going to walk into the image of themselves. This is easy if you just pick a frame and then either export the frame as a still or you duplicate your video layer, freeze that frame, and them mask out the person.
Now you perform your 3D camera track, move to the exact frame you want to use for the transition, select a target and insert either a null or a solid, and then replace the null or solid with your freeze frame. The last part is to set the out point of the layer with the freeze frame right where you inserted the solid or null.
You will then have to scale and position your layer to match exactly the size and position of the person in the video. Simple, but not a one click trick.
Watch this. It will show you how to set a target, move it into position and then set up a mask. It's not your exact workflow, but it will show you, in less than two minutes, how to do the trick.

Similar Messages

  • When transferring HR data from ECC to CRM via change pointers

    When transferring HR data from ECC to CRM via change pointers ,certain data is getting earsed in CRM
    paricularly the last name and first name of BUT000
    Do you have any idea why this could be happening
    Thanks in advance

    Hi Kittu,
    Change pointers. Change pointers are R/3 objects that mark changes to SAP master data. Change pointers are managed by mechanisms in a Shared Master Data (SMD) tool and are based on Change Document (CD) objects. CD objects record the changes occurring to master data at a field level. These changes are stored in tables CDHDR (header table) and CDPOS (detail table). ALE configuration provides a link between CD objects and change pointers. Internal mechanisms update tables BDCP and BDCPS, which host the change pointers. While CD objects are application-data-specific, the processing status of change pointers is message-type-specific. Also, the ALE change pointers are activated first at a general level and then at the message-type level.
    use this links kittu.
    http://help.sap.com/saphelp_nw04/helpdata/en/ab/27bde462848440ba70cf8eb348c86f/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/0f/9d563cf19bcb43e10000000a11405a/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ab/27bde462848440ba70cf8eb348c86f/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
    Creating a change pointer and subsequently triggering an IDOC
    thanks
    karthik

  • Why when I email photos from iPhoto do they not show in my sent items in my mail ?

    Why when I email photos from iPhoto using the share option does the email not show up in my sent items box in Mail. The emails are arriving ok but I do not have a record of the email being sent. Bit confused. I am new to my iMac .

    If you are using the iPhoto email client there is no sent mail box
    My suggestion is to set Mail as your email client and then you have everythin in Mail and have a sent mail box
    LN

  • Why when playing a film from iTunes through a digital av adapter on my ipad2 does the picture get pixelated

    Why when playing a film from iTunes through a digital av adapter on my ipad2 does the picture get pixelated

    iPad 3 does not have a lightning port, it's 30 pin.

  • Why when I export photos from I photo to the desk top , and then to a CD they end up as alis  and some are not really there?

    Why when I export photos from I photo to the desk top , and then to a CD they end up as alis  and some are not really there?

    Why? Because of something you are doing wrong - however unless you actually tell us what you are doing - and what version of iPhoto you have - and any other detail that might help no one can even gess.
    Exactly how are you exporting? Are the photos successfully exported to the desktop? How are you moving to the CD? why do you think they are not there?
    LN

  • HT204291 Does anyone know why when streaming a movie from my iMac the screen on my tele goes grey but I still get audio. It only happens when using the DVD application on the mac. iPhoto streams fine.

    Does anyone know why when streaming a movie from my iMac the screen on my tele goes grey but I still get audio. It only happens when using the DVD application on the mac. iPhoto streams fine.

    You are prevented from Airplay mirroring certain things like DVD content as the material is usually protected so you get a checkerboard type display.  I think there is a theoretical risk that the Airplay stream could be intercepted and the protected video copied, albeitin lower quality.
    Apple may be being cautious or are required to do so with the DVD player app by movie studios/licensing authorities.  It makes no sense to the average consumer who is just trying to send their purchased DVD to the TV via the computer and AppleTV.
    Playback in something like VLC should work - not tried it myself but others have commented it doesn't have the restriction.

  • Why when I send messages from my iphone to other iphones, they come up green and not blue? I have all the settings on for I message, but my number comes up grey and not Black? Help someone please!

    Why when I send messages from my iPhone to other IPhones, they come up green and not blue? I have all the settings on for I message b ut my number comes up grey and not black? Please someone help!

    Hi evan191,
    Thanks for using Apple Support Communities.  This article has some steps you can try if your messages aren't sending as iMessages:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    If you still can't send or receive iMessages
    Ensure that iMessage is turned on in Settings > Messages.
    To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
    iPhone: Troubleshooting Cellular data
    iOS: Troubleshooting Wi-Fi networks and connections
    iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
    If an iMessage cannot be sent, it will be resent using SMS or MMS, depending on the content. You can turn this behavior on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
    Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
    Cheers,
    - Ari

  • When I command tab from diablo 3, my mac changes to a non-retina resolution. But when I quit diablo, it comes back. what's happening?

    when I command +tab from diablo 3, my macbook pro changes to a non-retina resolution. But when I quit diablo, everything comes back to a full retina resolution. what's happening?
    Is this some sort of defense mechanism to save energy or space? I noticed that this only happened after I installed mountain lion. I didn't have this problem before.

    I don't think Diablo is the problem. It is retina compatible. Its what happens when I use diablo then go to desktop, or any other application - it (the other application) appears a bit blurred. as if its using the 2011 macbook pro resolution.
    It can be fixed by going to system preferences and clicking "display" then use "best for retina", but it wasnt like this before OSX mountain lion...

  • Why when I drag photo from bridge into existing document, it opens with an X through it? Most of my functions are then grayed out. Thanks for any help.

    why, when I drag a picture from bridge into PS, to an existing document, I get N x THROUGH TH
    E PICTURE AND MOST OF MY FUNCTIONS are grayed out?

    It is opening as a smart object. Simply right click on the image in the layers panel and "Rasterize Layer" when you are finished placing and sizing the new image.
    Benjamin

  • TS1324 why when i delete emails from my computer it doesnt sync to my email on iphone?

    Why when I delete my emails from my home computer the do not delete from my iphone?

    keeferaf wrote:
    They are, you just not going to received any emails from that deleted email address. Just remove them from your iphone......
    Settings>>Mail, Contacts, Calendars...... from there, tap on the email you deleted, and and tap Delete Account
    No one mentioned deleting an email address...

  • HT4914 Why when my play lists from itunes go into icloud, the song list are backwards?

    Why, when my playlists from itunes go to icloud, the songs in the playlists are backwards? any idea...both my iphone 5 and ipad 4 retna

    Sounds like you are trying to stream the songs vice having them downloaded to th iPod.
    First go to Settings>iTunes and App Store and turn OFF SHOW ALL
    If still problem
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             

  • Change mask from white to black

    How do I change a mask from white (reveal all) to black ide all

    Hi [email protected],
    Pressing the X key just changes the toolbox color chips (reverses the foreground and background colors in the toolbox)
    Yes if you add a reveal all layer mask (white) and want to turn it black (hide all) then Cmd+I (invert) or invert in the properties panel.
    Thanks

  • Why when  i copy files from downloads to a new folder,then i delete them from the downloads i will loose the file?

    tell me please when i copy files from downloads  it will be a new file with new capacity? i mean if a file is 2 mb, when i copy it it will be new 2mb ?

    If you copy it to another folder, e.g., Documents, and you can see it in the Downloads folder then you now have two copies of the file. If you delete one copy, the other stays intact. If you keep both, there is no harm, although the amount of disk space used is twice as big as when you only keep one copy.

  • When printing mailing labels from Contacts how do I change the label size?

    I want to print mutliple labels from a group in Contacts. I can print 20 labels per page but I want to print 14. I have tried every option in the pop up window but nothing lets me change the label size, 

    Hi 786menzies,
    Welcome to the HP Support forums.  I understand that your print jobs from Photosmart 5520 seems very small.
    The font size is controlled by the software program that the document was created in, for example any Microsoft Word document that you send to the printer the font size would have been chosen in Microsoft Word.  I've included two different documents on how to change the print settings; one for Mac and one for Windows 8.  These documents will show you the process on changing print settings if not the actual steps as you may not be using one of the operating systems mentioned.
    Changing Print Settings in Mac OS X
    Changing Print Settings in Windows 8
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • When i copy code from DW to BC it change the code inside BC

    Hi
    I'm uploaded a html page to a BC account from Dreamweaver and BC changed some of the code,
    I tryed to open the Site Manager / Pages and the page i uploaded and did a copy & past to get the code inside, but it still changes the code.
    Im trying to get the code <i class="icon-caret-down"></i> in but it change that code to <em class="icon-caret-down"></em>
    Anyone know why this is happening or how i can go about this??
    Best
    Morten Håland - Sitespark

    The editor inside BC is XHTML compliant and will edit things into that format unfortunatly. Try to avoid using it for anything other then content.

Maybe you are looking for