Why when I go to a site where they play videos it starts playing on its own and the pic. quality is bad and no option for full screen
help with this please can't I just use my default player
fullscreen option is in flash-player that your webpage download from server. you cannot change that, you can only enable or disable flash entirely on your side.
Similar Messages
-
When I download Microsoft word documents (if have word 2007), I have somehow changed the settings and it downloads them in wordpad, and the format is very bad and I can't read a lot of the document. How do I change the default setting back to using Microsoft Word 2007 to open these documents?
== This happened ==
Every time Firefox opened
== about a few weeks ago - I had tried to open some docuuments saved on a mac, my PC (which runs Windows 7), used word pad to open these, and this seems to have changed the default settings somehow.See this:
[http://support.mozilla.com/en-US/kb/Managing+file+types] -
My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?
I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
BTW the ipod is an ipod video not classic if that makes any difference.
Thanks -
Is there anyway to print an ibook -
was told I could add a link to the ibook that would send the customer to my web site where they could print it?
I was told a customer could not print an ibook that they purchased?
Trying to figure out a way for them to purchase a book that they need to fill in information.
or download to their computers and print.
Any suggestions.... I have called and emailed - but can't get an answer
I have 5 books I would like to do this with.
<E-mail Edited by Host>BlueEyesinLA wrote:
Is there anyway to print an ibook -
Not as such. You would have to put a pdf version on your web site for download, which the reader would then have to print for himself. A pdf version might look rather different than the epub or .ibooks version, you would have to try that yourself to see how much. -
I cannot get any of the zoom functions to work, period. When Firefox starts up it begins to display the page then it stops and redisplays it. So its like it flashes on for a second then completely regoes to the site, any site. The text zooms dont work even when i try to change the font on the content tab, nothing. I have reinstalled firefox still no luck help,!!!!!
== This happened ==
Every time Firefox opened
== this month ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; InfoPath.2)Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
Latests ongoing 'upgrades' as they refer them IOS7, without announcement removed the feature that showed an assignged contact image appearing full screen when that contact called. Why ? brilliant feature Fast losing faith, thoroughly ****** off, moving on to another phone.
We are all users here. You are not talking to apple on these forums. There is no way anyone here can know the decision making process apple uses to determine what changes to make to the operating system. Also none of use care about which phone you might buy next.
-
why when i use firefox 4 or 5 they didn't ask like firfox3 save and quit this option not include in 4 or 5 or 6
Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session.<br />
Use "File > Exit" or "Firefox > Exit" (Mac: "Firefox > Quit Firefox") if you want to restore multiple windows.<br />
You can use "History > Restore Previous Session" to get the previous session at any time.<br />
You may need to click the orange/gray Firefox button to see History.<br />
There is also a "Restore Previous Session" button on the default <b>about:home</b> Home page.<br />
<br />
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox/Tools > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time" -
Is there a site where they will write javascript for your pdfs that you could pay them to do it.
Is there a site where they will write javascript for your pdfs that you could pay them to do it.
Hi timothyh,
Adobe doesn't offer those services, but you might try looking here: Planet PDF - The PDF User Community - Debenu.
Best,
Sara -
when i try to reset my ipod it stops at 10minutes and the ipod turns itself on and acts like ive done nothing to it, it has been stuck on the "connect to itunes screen" and it wont reset. why?
After you place the iPod in recovery mode using
iOS: Unable to update or restore
You have to then connect the iPod to your computer and restore via iTunes. Are you doing that? -
When I insert an audio CD into my iMac, it automatically starts playing
When I insert an audio CD into my iMac, it automatically starts playing, and I can't figure out why, nor how to stop this behavior. When I click in the upper right corner of my screen where it says "Finder", it shows the Finder as the only application running, and yet SOMETHING must be causing the CD to play. If it is an Extension that is being loaded, is it possible to terminate the Extensions one by one without restarting the computer to see which one is playing the CD?
Is the OS9.1 operating system supposed to automatically play audio CD's when they are inserted into the iMac? Or could it be an Extension that is doing it?And if so, why is no means provided to actually CONTROL the playing of the CD (such as a control panel with PLAY, STOP, SKIP, etc. buttons)?
On a PC, I can press Control/Alt/Delete to bring up the "Task List" that will show me ALL applications and processes currently running, and then terminate apps and processes one by one without having to restart the computer to see which one is playing the CD. Is there an equivalent way to display this information on an iMac that will show me which application or process or extension might be causing the audio CD to play, and allow me to terminate them one by one without restarting the computer until I can see which one is the "problem"?
JerryHi, Jerry -
Welcome to Apple's Discussions.
Finder uses QuickTime in the background to do that, hence no specific app is shown in the Application menu (the far right item in the main menu bar) in addition to Finder.
To unset automatic playing of CDs (and DVDs) -
Open the QuickTime Settings control panel (Apple menu > Control Panels > QuickTime Settings).
In that control panel, select AutoPlay from the pulldown menu in the control panel. Uncheck both the items shown in the new window. Close the control panel.
No restart should be needed in order to make the change effective.
Doing this will also guard against the (now ancient) AutoPlay virus, which could still be lurking somewhere on the net. -
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
I have a mac OSX desktop version 10.6.8 and all of a sudden I can't get a full screen view in Safari when I ask for help the response is use the arrows on the top right of the screen ... I don't have them ... can anyone help?
Hi Mary,
I don't remember those arrows in 10.6, only 10.7 & up!?
I have 10.6.8, as you do. To make your Safari full screen, make sure you have the left hand side of your safari page moved all the way to the left. Then move your cursor to the BOTTOM RIGHT CORNER of the safari page, and simply drag your page towards the lower right hand corner of the screen. NOTE: you will see a series of lines on the bottom right corner of the page, indicating where to place you cursor arrow.
By wuzradioman here...
https://discussions.apple.com/thread/4218928?start=0&tstart=0 -
When I try to save, I keep getting the message "The document could not be saved. You don't have permission" - even though I am the Administrator and the Get Info displays "Administrator" and my_name(me)". Also, when I do a disk permission repair, it always repairs the same applications and files. Last night, I did a disk permission repair twice and both times it took a long time and did the exact same repair both times.
Disk Utility won't repair your home folder. Sounds like your home folder permissions are messed up tho. Try repairing them this way by using Lion Recovery.
1. Restart Lion, and before you hear the chime, hold down the Command and R keys.
2. You’ll be at the Repair Utilities screen. Click the Utilities item in the Menu Bar, then click Terminal.
3. In the Terminal window, type resetpassword and hit Return.
4. The password reset utility window launches, but you’re not going to reset the password. Instead, click on icon for your Mac’s hard drive at the top. From the dropdown below it, select the user account where you’re having issues.
5. At the bottom of the window, you’ll see an area labeled Reset Home Directory Permissions and ACLs. Click the Reset button there.
The reset process takes just a couple of minutes. When it’s done, exit the programs you’ve opened and restart your Mac.
Good luck
RM -
Hi. please solve my problem.
.call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.3.playback music is not hearing by second partner during the call.4.i cant select ringing ton from saving tons.
thank you in advance.Hi Ersin,
Exception 1 would seem to be FORMATTING_ERROR, which suggests something in the design of the Smartform. However, that doesn't fit with the form being generated from a report, but only erroring when called from a function module. I can think of no reason why the different calling method would be a factor.
When FORMATTING_ERROR is raise it should also set a message ID and number, are you able to determine what they are?
Regards,
Nick -
When i use google earth or somebody sends me a message or just simply opening a new tab, it crashes and it takes about 30 seconds to start working again, its not my computer as it is new and it has high spec, any help? thanks
I figured it out!
I read a solution for something that sounded similar.
Anyone in similar position:
Open iTunes app on iPhone, and pick an option from bottom, such as music. Then scroll down to bottom of page and where your iTunes ID is, press on it, and pick sign out.
Then return to home screen, and double press home button and press and hold on first icon showing, until a minus symbol appears in the top left of icons present. Press on each minus symbol on each app in turn, until all app icons have disappeared. Then Restart the phone by pressing and hold the home button and the on/off/standby button at top of phone, until the apple symbol appears in centre of blank screen.
Swipe to turn phone fully on and open settings and scroll down to iTunes and apps option and tap that. Pick sign in and put in your apple ID, it will accept it and then return to home screen and open iTunes a you'll find it works fine
Simple really, but some like me won't think f this themselves!
Hope that helps
Maybe you are looking for
-
Lens Misidentified in Lightroom
Currently using LR 5 and starting to use features that use profiling. I recently noticed that whenever I use my Sigma dc 18-125mm 3.5-4.5 it is identified as a Pentax 28-80mm 3.5-4.5 in Lightroom. I do use Pentax bodies but do not and have never had
-
How do I scroll through my whole music library?
-
Adding a new search criteria in Web UI for Sales Order
Hi, We have a requirement for Web UI as follows : We want to add the ID number (identification number in BP ) as search criteria for Sales Order simialr to search criteria available in Accounts with ID number . Can any one please give some inputs on
-
How to edit the legend of a multiplot?
Hi folks, how do I edit the legend of a multiplot (waveform chart or waveform graph)? I have displayed eight columns of data in one chart but the legend shows only "Plot 0" and not the other ones. Any hints? Thanks in advance - David.
-
IOS 8 WiFi automatically downloading something in background!
Hi, My iPhone 6 is automatically downloading something in the background but I don't know what it is. I've turned off automatic downloads, deleted iCloud backup, turned off photo stream, but it seems like it's still downloading something. I can tell