Why, when I make a table in a Thunderbird message, does it now make everything within the table larger, even though it doesn't look like that on my computer?
I have been using Thunderbird to send e-mail newsletters to members of an organization I work for. To do that, I have been using tables to make a coherent looking newsletter. Suddenly, sometime recently in an update or something, ALL OF THE TEXT that is inside the table comes out larger when it is sent. So all my formatting goes to hell. Anything that is OUTSIDE a table, however, looks the same as when I typed it, so it isn't the general formatting of Thunderbird. I have to save everything as a draft (several times, usually) just to try to get it to look right.
I am including two screenshots to illustrate what I mean. The first, called "compose.jpg" shows how I had to adjust the font size to make the tables work as I had intended. This is what I see when I am composing an email newsletter, not the larger font that appears once the email is saved. The second, called "draft.jpg" shows how this same (exact) email looks when it is saved or sent. (This one is saved as a draft.) Notice that the text at the bottom of the message has NOT been enlarged because it is outside the table.
No, the signature is not the issue, it is only an example of the issue. Compare the text size in the "compose" image with that in the "draft" image. For whatever reason, text placed in a table is magnified to be much larger than what I see when I compose it. But ONLY in a table. This means that I must juggle the size of the text after I prepare an e-mail newsletter (using tables for formatting) or it won't look like I expect it to.
This only began to happen sometime late last fall, which is why I wonder if it came as a by-product of some update. What I would like is to be able to specify that the text size I enter in the table remains that size when the email with the table is sent, preferably as a permanent specification, and not necessary every time I do one of these.
Similar Messages
-
I currently have my credit card on my iTunes account and when I have no money in my bank account it won't let me download the free apps even though they don't cost anything. How do I stop this so I can download or remove my credit card?
All downloads from iTunes are tied to the account that downloaded it, you can't re-download content via a different account. You checked the spam folder on yourr old account as well as the Inbox, and depending upon how long ago you did it, have you retried getting it reset : http://appleid.apple.com, then 'reset your password' ?
-
good morning! i'd like to know why when I write an email in Mail, it creates numerous copies each second which fill the trash box. My email is set up with IMAP and is a gmail account. Thanks
Open Mail preferences and select Accounts then MailBox Behavior. You probably need to unclick the safe draft to server.
-
When I get a phone call or text message it will not make the sound. Just vibrate. But the switch is on normal. When I change it to vibrate the volume thing will not show. Nor will my up volume up key work. Is there any way to fix it?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
Does anyone know why- when I import a one minute video project into Final Cut X from I Movie the resolution that looked alright full screen in I Movie instantly becomes worst on full screen in Final Cut X...but clear again when I stop it to still position?
I'm new to video editing but I think I recall seeing an option in FCPX which lets you choose the video quality for the preview window. I think the window reduces the quality when playing back for performance reasons and so perhaps that is why it seems to have less quality when moved over to FCPX? Just a possibility, I'm sure one of the more experienced users can confirm or deny this theory.
-
I downloaded Lion on my 4 yr old iMac. The download stalled at the last minute so I clicked "CANCEL". When it was restarted, Lion was there, with no apparent option but to go ahead and install so I assumed it was okay. Didn't transfer data from "another computer" when prompted - assumed it would transfer from that computer. It apparently cleaned out the hard drive. It looks like a brand new computer. None of my apps, programs, files, or thousands of photos. It is backed up on Time machine, but it's a sickening sight. Any idea why this happened and suggestions before restoring? Thanks.
I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots. -
When playing music on my iPhone 4S, it keeps repeating the same song, even though it is set at Shuffle.
Make sure you don't have Repeat turned on. While the song is playing, tap the screen (cover art) if necessary to bring up the extended music controls (see image below). Then tap the Repeat button until it turns white (which is off).
-
Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?
Please take the Mac to Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best. -
I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back. -
while trying to sync with my iphone I recieve the message: This computer is no longer authorized for apps that are installed on the iPhone “Terri George’s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store? When I put in my password and hit authorize, I get a message telling me there was an unknown error (-50). Would love to sync today. Any help would be appreciated.
The -50 error is documented in this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
Here is a synopsis:
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
I upgraded my new iPad (iPad 3) to IOS 6 and everything went well except Siri won’t launch apps. When asked say “launch Facebook” Siri responds with “it doesn’t look like you have an app named Facebook” and I get the same results when trying to launch any app. Siri works for everything else it just won’t launch apps. Any ideas? Thanks.
I have this same problem... Seems like nobody else does. Siri won't launch any apps for me, including native apps.
-
Why do my 2 iphones ring at the same time even though they have different numbers?
Why do my 2 iphones ring at the same time even though they have different numbers?
Are they sharing an Apple ID?
On both phones:
Settings > FaceTime > turn iPhone Cellular Calls off -
Working on my page, everything looks good in iweb, I publish, I go check on the internet, and the fonts on the page go crazy. iweb doesn't show it that way. Why is this happening?
Looks OK to me - is this what it should look like?:
Try clearing your brower's cache, and/or using another browser. -
Drag a column from one position to another within the table.
Hello All,
In Web Dynpro Java, Is it possible to provide user a functionality with which he/she can move the columns of a table from one position to another ?
Scenario : Users want flexibility to decide the location the columns as per their convinience while they are working with the application.
So can we develop some code or can we use some UI element so that user is able to drag a column from one position to another within the table.
Regards
Mrinalini.Hi Mrinalini,
Yes this is possible you can try to move the table columns (Change the order). for this you don't need to do additional coding or property change its a default property for web Dynpro java tables.
Regards
Jeetendra -
Why SAP has provided the VOFM routines even though we do have User-Exits?
Hi Experts,
Pls. let me clarify about,
1) What is the difference between VOFM routines and User-Exits?
2) Why SAP has provided the VOFM routines, even though we are having User-Exits, BADIs?
3) Is VOFM is meant for only SD module or we also use VOFM in other modules too, like MM, PP?
thanqDo be careful about asking questions that sound like interview questions...
> 1) What is the difference between VOFM routines and User-Exits?
VOFM are type of user exit.
>
> 2) Why SAP has provided the VOFM routines, even though we are having User-Exits, BADIs?
>
Historical. They were created before BADIs and CMOD user exits were invented. The other "old" user exits in SD are the user exit forms.
> 3) Is VOFM is meant for only SD module or we also use VOFM in other modules too, like MM, PP?
>
Only SD.
> thanq
You're welcome.
Maybe you are looking for
-
Webcam and keyboard light not working on my macbook pro
I just reinstalled snow leopard on my macbook pro and I can seem to get my webcam to work, the light on the keyboards are not coming on either, has anyone encountered something like this before
-
Creating documents in shared folder of SAP mail
Hi all, I would like to create documents in a shared folder of my sap mail. I know it can be done by method create of object SOFM. I just don't know how to set up this method. What parameters are needed and how to do it correctly. Thx for helping, Yo
-
Course will not play in LMS until the Exit button is clicked
I'm stumped. I've created a course that plays fine until I enable reporting in our LMS. This is the first course we've created in Captivate 5, and I'm using the same Quiz Reporting settings that we used in Captivate 4 (that always worked). If the
-
Dear All, I have a problem in CRM 5.0 In Organisation model i have created a new org unit and assigned some org units under that node created earlier . Now i am not able to save transaction as it gives error . Org unit (sales) does not have these at
-
The Sims 3 error message Device 0 cannot run this title.
Unable to start game Device 0 cannot run this title. Your video card does not appear to support at least Shader Model 2. Please upgrade your card. HP Pavilion a1110n desktop PC Windows xp home edition service pack 3 I have the following: Intel(R)8284