Why when playing music from APTV3 stored in cloud does it stop after 5 or so songs??

I have loaded all my itunes library to the cloud, (itunes match) £21.99 per annum, i switch on Apple tv3 which is hard wired to my virgin superhub 20mb, i choose music (itunes match) and select a tune or playlist or an album, hit play and we have music, APTV3 has HDMI into AV amp so amp plays music to speakers, but after say 5 or so songs it stops playing, as though its paused. But the marker just sits at the start of the song and the little loading sign just spins!! frustrating!!!!
Any ideas anyone please
just to say if i play from laptop or iphone and airplay it to APtv3 its fine!!! No drop outs, stutter or stops!!
darrell

Never Mind, I figured it out.

Similar Messages

  • When playing music from Ipod in my car, music suddenly stops and message appears to restore in iTunes.  After a few minutes, it starts to play again.  I hear a click and the apple logo shows on the screen.  Any ideas??

    When playing music from Ipod in my car, music suddenly stops and message appears to restore in iTunes.  After a few minutes, it starts to play again.  I hear a click and the apple logo shows on the screen.  Any ideas??

    You may need to do a Restore in iTunes.
    Clicking sounds from an iPod that has a hard drive is probably not a good thing.  It is possible that your iPod's hard drive is becoming unreliable.

  • I have a new iphone6+  and have paired it to my 3 cars. When playing music from my iphone, the volume is very low and I have to turn the car volume to max to listen. I had no issues with previous iphone parings. Pls help.

    I have a new iphone6+  and have paired it to my 3 cars. When playing music from my iphone, the volume is very low and I have to turn the car volume to max to listen. I had no issues with previous iphone parings. Pls help.

    Sorry if this is too basic or confusing
    Apparently in iOS 8 there are different volume settings for different applications
    The setting on the home screen does not carry over to Pandora for example and it is different ( or at least appears to be) for the in-car experience.
    So I would try to stream the music when not in the car - see if you can turn the volume up and then try again in the car
    Please let us know what happens
    Thanks

  • Why when my music was matched to the CLOUD did my music become the clean/censored version and how the **** do I get back my original music?

    Why when my music was matched to the CLOUD did my music become the clean/censored version and how the **** do I get back my original music?

    Why when my music was matched to the CLOUD how did my music become the clean/censored version and how the **** do I get back my original music?

  • Apple tv gives me a message "cannot load "when playing music from my computer

    When playing music on my apple tv from my computer library, in the last week or two I have received on a frequent basis a message that says "cannot load data". Any ideas what may be causing this ?

    No, none that I am aware of.

  • Do play counts update when playing music from iCloud through AppleTV?

    I'm trying to figure out a way to get my play counts to update when I play music from iCloud through AppleTV. I use this method of enjoying music an awful lot, but my play counts are important to my overall music organization. Anyone know how to make this work?

    only if it's a feature of the tv I think my sony one have a movement detector and turn off if there are nobody moving close by
    the old appletv1 would play out the optical even with no tv connected to hdmi but the 2g one after some os updates require an active tv connection

  • Home Button Plays Music From Sleep, Instead Of, Well, Doing Nada!

    Pretty much as the subject states
    Ipod touch 64Gb - when you press the home button (from sleep), rather than have the wallpaper and slide to unlock, you instead get album art and slide to unlock and the tune kicks in!
    Restoring it to a "new" ipod with just one tune on it, does not fix the glitch. This is brand new and has done it from day one, I have noticed other similar threads where the touch just starts playing music, this is slightly different?!.
    One thing, it doesn't do it if the headphones aren't plugged in, nor does it do it if the older style headphones are plugged in, just the new ones with a mic attached?
    Anyone with a similar problem got an easy fix, or am I going to have to trek into London to an apointment with a genius and have something swapped or fixed?
    Cheers!

    This is from it doing nothing at the main screen, after a minute screen turns off and locks.
    You press the home button to wake the thing and slide the unlock, straight away the tunes kick off before you can do anything but only when the new mic headphones are plugged in.

  • Why isn't there any view options when playing music from devices in itunes?

    I prefer to play all my music directly from my Ipod, but the truth is, itunes is useless on manually managing the content of large external devices, and the only major reason for this, as I see it, is the list-view only option.
    I don't get why they've left out the grid view option. It would be so much qicker to pace through the ipod library to find what you're looking for, and it would look much cleaner. Considering how the ipod classic lacks any editing features, it would be nice to atleast have a more organized view when it's docked!
    For the record I have started using Winamp again, as it feature much more options, but on the downside, it's much trickier to manage ipod playlists in winamp. So I rather wish apple would just open up the grid function, and hopefully the coverflow feature, for devices as well. I Can't believe why so few complain about this. It *****!!

    If there are music tracks in the Music app but your can't hear them, then make sure that you haven't set the volume limit for the app at the minimum : Settings > Music > Volume Limit

  • Sometimes ill play music from my speakers and it will just stop and my speakers would not work then it would start working again and it continuously does this

    Is there any way to fix this dilemma ?

    What kind of speaker... how far away from phoen is the speaker is the battery in the speaker low

  • ITunes 7.6 Bug: Does not play music from Intelligent Playlists

    Since I upgraded to iTunes 7.6 I can no longer play music from my intelligent playlists. Whenever I try it will remove the song from the playlist instead of playing it.
    Has anybody else experienced this and maybe found a solution?
    And if not, how can I downgrade to iTunes 7.5?

    ... and one other thing: I had to re-activate my computer repeatedly to be able to listen to the music bought in the iTunes store. After several vain attempts it finally worked when I accessed the piece directly in my music library instead of from a playlist. However, my computer was re-activated as a new pc although it had been activiated already before the upgrade.
    And as to changing the infos - in my case to Soundtrack - this works only as long as the intelligent playlist tries to actually play he song. Then the info changes back automatically to the former status - in my case the German "Filmmusik" (meaning soundtrack in German).
    So it seems that this is simply a localisation (or purely German?) problem with iTunes getting mixed-up with the non-English and English definitions. I now have changed all genre infos to "Filmmusik" instead of Soundtrack, and voila, it is working. - Very strange, indeed.
    Anyway, for the time being I will not mark this thread as solved as I am not sure that this is the permanent solution.

  • WRT1200 Network error when paying music from external disk attached to the Router

    Hi everyone, I have one problem with my new WRT1200AC wireless routerFrecuently network errors when playing music from external USB3 disk attached to WRT1200AC Any idea to solve this problem Thanks in advance Regards, Rod

    Wireless Configurations
    Ensure the default (linksys) SSID name is changed. Ensure that different SSID names are used between each WiFi 2.4/5Ghz radios for dual band routers. Can be anything and not something that's already in use by any neighbouring WiFi routers.
    What wireless modes are you using?
    Try Mixed mode, single mode G or N or mixed G and N on 2.4Ghz and single mode N or Mixed on 5Ghz?
    Channel Width set for Auto 20/40Mhz or try 20Mhz only.
    Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz. http://en.wikipedia.org/wiki/List_of_WLAN_channels
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=f2625b15a5d7454b8e7fafbe65d5aa63_4009.xml&pid=80&respid=0&snid=4&dispid=0&cpage=search
    What security mode are you using? Preferred security is WPA-Personal. WPA2 Only. 
    Ensure any devices with WiFi adapter drivers are updated.
    Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
    Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
    WMM Support must be enabled for single wireless N mode to function.
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&articleid=5471
    Router Placement
    Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
    3-6' feet minimum safe distance between devices.
    Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d9a3b1b2039741948a2365b053a93ea8_3759.xml&pid=80&respid=0&snid=2&dispid=0&cpage=search
    http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-essentials
    http://kb.linksys.com/Linksys/GetArticle.aspx?docid=acca9b9008f04a66af818c2ab366001e_Positioning_the_external_antennas_on_the_Linksys_WRT1900AC.xml&pid=80&converted=0Rod2 wrote:
    Thanks I play music fom external disk attached to the router from my internal netwok. No Internet traffic. The network error occurs between a notebook and the router in my home network Thanks Rod 

  • Why when playing downloaded music on apple tv through my distributed audio, it sometimes skips like a scratched record or just stops (in pause mode and won't play again) and yet i have full bars on the wireless in home service from the mac to the appletv?

    Why when playing downloaded music on my mac through my appletv (I have distributed audio so play it through speakers not actually on the television), which is sent wireless from mac to the apple tv, does the music sometimes skip like a scratched record or stop playing (in pause mode) altogether and won't start again when I hit play?  I have full bars on the wireless icon.  Anyone experience this?

    Full bars don't tell the whole story. These issues usually stem from interference, use istumbler to verify

  • I was downloading music to my iTunes account and playing music from my I tunes library when all of the sudden it stopped playing and the control panel won't let me restart the music.....why

    I was downloading music cd from my PC to my I tunes library and playing music on the I tunes player at the same time when all of the sudden my music stop playing and I can't get the I tunes player to restart playing music from my library again. The I tunes equalizer / player box with timer shows the song ready to play but the controls won't restart the song.......why not, and how to I get it to restart playing my library?

    - You need to restore the iPod to factory defaults/new iPod and start anew.  Is the restore button visable in iTunes?  If it is they restore the iPod.
    - If it is not visible try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - If the restore button is still not visable, try placing the iPod in recovry mode.  See:
    iPhone and iPod touch: Unable to update or restore

  • My mac gets slow when I play music from my iTunes library

    Hi, aproximately six months ago I noticed that everytime I play music from my iTunes library that its stored in my 27" iMac's hard drive, the computer gets slow, the images start to flicker, the animatios on the dock and the one when u minimize or maximaze the windows, also flicker. As soon as I close iTunes the computer works fine again. When I play music from a CD this doesn't happen.
    I've taken the iMac to two service providers along theese 6 months and neighther have been able to fix the issue. What they have diagnozed is an issue with the hard drive which has been changed 4 times already.
    What could be the issue?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Why can't I play music from the cloud on my laptop?

    So I recently uploaded all my music in the iCloud from my PC Desktop computer in hopes that I could play this music remotely from my laptop. Unfortunatly, it's saying I can't within 40 days when I turn on iMatch. So what's the problem? Do I need to wait 40 days in order to play music in the cloud on other devices? Or is it saying I can never play music from other computers even if I sign in with my own Apple ID?

    I know you're saying that, but I can't think of a reason why you would be getting a warning that you couldn't play music within 40 days of turning on iTunes Match unless you changed IDs.  This article explains this: http://support.apple.com/kb/HT4627.
    If you feel you are getting this in error, try contacting iTunes store support and ask them what's going on, by going to https://expresslane.apple.com, then click iTunes>iTunes Store>Other iTunes Store Topics>The topic is not listed.

Maybe you are looking for

  • Table for variables of a query

    Hi, I want to find the list and details of variables used in all the queries built on a multiprovider. Can any one plz help in giving the table name whcih give the details of variable name, Type(userexit/manual input/replacement path), Details(ready

  • Data loading error

    hi there, i having a problem, i'm not able to load data from 3rd party to bw, it is given an error, Error in ABAP application program. The current ABAP program "SAPMSYST" had to be terminated because one of the statements could not be executed. This

  • Exporting a PDF for print, the PDF does not show a shadow effect

    I have a drop shadow effect on an EPS object and some type that does not appear when I export the file as a PDF for print. The settings I have it set to are: Adobe PDF Preset: "High Quality Print", Interactive Elements: "Include Appearance", and Colo

  • Discount Base Amount

    Good day all When I do postings via FB01 the discount base amount gets calculated automatically, which is correct. (Post key 40 and 31, Doc Type AB). When payroll does their postings to FI, to the vendor account, the discount base amount does not get

  • Testing hardware over the network.

    Does any one know if this is even possible and if so, how? I have an external firewire drive that is acting up and I need to test it but I can only access it over a network (it's connected to another computer in a remote location). I can connect to t