Why why why G4 TI4200 vtp use power ???
Why I use G4 Ti4200 VTP my board power 3.3v
will go down 3.02v ??
Tnt M64 didn't be this (3.2v in normal)
And run 3D game it will go to 2.97+-v???
400w powersuppy.
Kt3 U2 6380e
256ddr ram
1800+ AMD XP
a gf 4 consumes far more power than the other card
i suspect you have a poor psu with poor amps on 3.3v rail,at a guess 14a,look on label on psu
Similar Messages
-
Why when I use Power Meter I have many message of error?
I use Power Meter NRTZ43 of Rohde &
Schwartz, but I have a driver, but when i put icon of Getting
started on desktop compare this message:
"RSNRTZ Application Measure Power.vi
Virtual Instrument
- The subVI expected to be at "C:\work\RSD\drivers\rsnrtz\lv6_vi\RSNRTZ
Reset.vi" was loaded from "C:\Program Files (x86)\National
Instruments\LabVIEW 7.1\instr.lib\rsnrtz\rsnrtz.llb\RSNRTZ Reset.vi".
RSNRTZ Config Measurement.vi
Virtual Instrument
- The subVI expected to be at
"C:\work\RSD\drivers\rsnrtz\lv6_vi\rsnrtzu\RSNRTZ Write And Read
Response.vi" was loaded from "C:\Program Files (x86)\National
Instruments\LabVIEW 7.1\instr.lib\rsnrtz\rsnrtzu.llb\RSNRTZ Write And
Read Response.vi".
RSNRTZ Error Query.vi
Virtual Instrument
- The subVI expected to be at
"C:\work\RSD\drivers\rsnrtz\lv6_vi\rsnrtzu\RSNRTZ Write And Read
Response.vi" was loaded from "C:\Program Files (x86)\National
Instruments\LabVIEW 7.1\instr.lib\rsnrtz\rsnrtzu.llb\RSNRTZ Write And
Read Response.vi".
RSNRTZ Initialize.vi
Virtual Instrument
- The subVI expected to be at
"C:\work\RSD\drivers\rsnrtz\lv6_vi\rsnrtzu\RSNRTZ Write And Read
Response.vi" was loaded from "C:\Program Files (x86)\National
Instruments\LabVIEW 7.1\instr.lib\rsnrtz\rsnrtzu.llb\RSNRTZ Write And
Read Response.vi".
- The subVI expected to be at
"C:\work\RSD\drivers\rsnrtz\lv6_vi\rsnrtzu\RSNRTZ Utility Default
Instrument Setup.vi" was loaded from "C:\Program Files (x86)\National
Instruments\LabVIEW 7.1\instr.lib\rsnrtz\rsnrtzu.llb\RSNRTZ Utility
Default Instrument Setup.vi".
- The subVI expected to be at
"C:\work\RSD\drivers\rsnrtz\lv6_vi\RSNRTZ Reset.vi" was loaded from
"C:\Program Files (x86)\National Instruments\LabVIEW
7.1\instr.lib\rsnrtz\rsnrtz.llb\RSNRTZ Reset.vi".
- The subVI
expected to be at "C:\work\RSD\drivers\rsnrtz\lv6_vi\rsnrtzu\RSNRTZ
Utility Clean Up Initialize.vi" was loaded from "C:\Program Files
(x86)\National Instruments\LabVIEW
7.1\instr.lib\rsnrtz\rsnrtzu.llb\RSNRTZ Utility Clean Up Initialize.vi".
RSNRTZ Measure.vi
Virtual Instrument
- The subVI expected to be at
"C:\work\RSD\drivers\rsnrtz\lv6_vi\rsnrtzu\RSNRTZ Write And Read
Response.vi" was loaded from "C:\Program Files (x86)\National
Instruments\LabVIEW 7.1\instr.lib\rsnrtz\rsnrtzu.llb\RSNRTZ Write And
Read Response.vi".
RSNRTZ Select Forward Measurement Mode.vi
Virtual Instrument
- The subVI expected to be at
"C:\work\RSD\drivers\rsnrtz\lv6_vi\rsnrtzu\RSNRTZ Write And Read
Response.vi" was loaded from "C:\Program Files (x86)\National
Instruments\LabVIEW 7.1\instr.lib\rsnrtz\rsnrtzu.llb\RSNRTZ Write And
Read Response.vi".
RSNRTZ Select Reverse Measurement Mode.vi
Virtual Instrument
- The subVI expected to be at
"C:\work\RSD\drivers\rsnrtz\lv6_vi\rsnrtzu\RSNRTZ Write And Read
Response.vi" was loaded from "C:\Program Files (x86)\National
Instruments\LabVIEW 7.1\instr.lib\rsnrtz\rsnrtzu.llb\RSNRTZ Write And
Read Response.vi"."
What's means???
Maybe I have old driver for LabVIEW6? Can u help me to find correct driver?
Respond me soon please...
Thanks,
Vanny
Sweet, Beautiful and Young Female Physicist (SBYFP)
(I speak a not very good english, so If U are Italian LabVIEW expert speak in Italian, if U speak in Eglish... please speak easy )
My e-mail for personal contact: [email protected]_NO_SPAM_PLEASEOK, I see what's happening. When the driver was originally saved it was saved from a working directory instead of from the instr.lib. It's still OK. LabVIEW updated the links. Just re-save the VIs once they open.
I have seen that there are also a driver "Virtual NRT for Power Meter NRTZ43", but I have the version for WIN 95/NT. And I don't find a version to WIN XP. Can u help me to find the correct version for my pc?
That's an application that Rohde&Schwarz wrote. I think the latest version is here: http://www2.rohde-schwarz.com/file/NRT_ZV2_1.EXE.
vanny wrote: I have connected Power Meter to this port:
but I haven't istalled my Power Meter. I have only put in instr.lib the folder of driver taken by site of Rohde & Schwartz.
In the manual (if u want to help me really with heart read please) there is write that I must set the PORT COM, but when I have seen in Panel Control of Windows and after in System the Power Meter is unrilevated (NOT DETECTED). But with labview I have illogical miasurement.
If I find the program to see the power in and reflected maybe I can understant if labview function is correct.
I wait you... but now Are u sleep? Eheh, kisses...
If you connected the power meter to the computer it's installed. The power meter will not be detected because it's a serial connection. An instrument connected over the serial port cannot be automatically detected in MAX (Measurement & Automation Explorer) like a GPIB instrument can. In LabVIEW you have to tell it which serial port you connected it to.
In MAX you will see the COM ports:
In the LabVIEW driver you set the COM port this way:
COM 1 --> ASRL1::INSTR
COM 2 --> ASRL2::INSTR
Message Edited by smercurio_fc on 01-15-2010 04:25 PM
Attachments:
MAX serial.png 49 KB
Power meter VISA resource control.png 26 KB -
Why doesn't LR let us use embedded/standard previews (at least optionally)?
I bought LR but cannot commit to using it mainly because it is too slow importing and browsing previews but also because LR's previews are worse than the embedded previews in RAW images or JPGs as displayed by other standard programs like Photo Mechanic, Breeze Browser or ADCSee.
I shoot Canon RAW (then convert the CR2s to DNG) and occasionally JPG (1DMkII) but I get hundreds of images from friends and family, mostly JPG, taken with many different cameras. The vast majority of these pictures look terrific in PM, BB or ACDSee, etc but they look significantly worse in LR. LR renders its own previews from RAW files instead of using the excellent embedded preview that's already there and LR also somehow changes the JPG preview so that it looks bland and off color in comparison to the same image viewed in PM, ACDC or BB on the same computer. I assume LR's color management or color space is what changes the previews (and thumbs) so they look different (bad) in LR than they look in other standard programs.
Why can't we at least have the option of using embedded previews in LR and display them normally like PM, BB and ACDC. Then LR would be fast (like PM, BB and ACDC) importing and displaying previews and we would not have to fiddle with exposure or color adjustments to get decent previews. Yes, I can get LR to just about match (sometimes exceed) the image quality of other programs but only with massive fiddling with individual images (the camera calibration controls are not sufficient by themselves) and that is a massive pain in the butt.
I, of course, have read many posts about color management. But I refuse to buy expensive color calibration tools and go through that expense and aggravation just to accommodate LR. My pictures already look great in PM, BB, ACDSee and web browsers and on other non-color managed computers. I think LR should be able to be operated in a standard manner so it is consistent with other standard software. The fact is that the vast majority of all amateur photographers, even pretty serious folks, do not hassle with color management because standard software displays very nice images already.
Another point. Some folks like to use Canon or Nikon or other RAW converters instead of Adobe's (for all or some images). If they develop their RAWS in DPP or Capture NX, etc, then import the images into LR, LR renders its own previews which disregard the work done in the 3rd party converter. This is pretty annoying and virtually prevents such folks from using LR. Other programs that use the embedded previews display the adjustments made in 3rd party RAW converters very nicely.
Regards
Bill WoodThanks for the replies. Sorry I could not respond sooner.
Nobody addressed my question. Why is there no option in LR to use embedded previews in RAW files and why is there no option to display JPG previews in a standard color space, presumably sRGB, like other standard software - Photo Mechanic, Breeze Browser, ACDSee, etc, etc?
LR's insistence on rendering previews from RAW files makes the program too slow and it forces users to diddle with settings to get previews that look normal - meaning match what 99% of the rest of the world sees on normal non-color managed computer screens. Folks who want rendered previews and non-standard color space (ProPhoto) and all the rest of us who just want standard previews by default should both be accommodated. Just give us the option to choose.
I just downloaded IDImager, a competing database type DAM program, for a trial. It does give users the option to use embedded previews for fast import and display or it will render previews from RAW if you choose that option. So it can be done and an embedded preview choice makes the program much faster and easier for most people to use.
Just a few comments about the replies:
Lee Jay said LR doesn't use embedded previews because:
"Correct...that's because it's a RAW converter and must display what you'd get from a RAW conversion."
Well, with respect, I cannot agree. First, LR is not just a RAW converter, its much more. If it was that limited, I never would have bought it and neither would anybody else. I already have ACR in Photoshop. Second, it is not mandatory that LR render previews from RAWs. It could optionally use embedded previews if that option was offered. Why do some folks lobby for lack of flexibility? I bet even you naysayers would use embedded previews sometimes, like when you want speed to show pictures to your family, friends and don't need to fester over image adjustments.
Lee Jay also said regarding the difference between my JPG previews in LR vs. other standard software:
"That is likely the fault of your monitor profile, which LR uses and the other programs (probably) don't. It could also be caused by you having "automatically apply auto tone" set, or by applying a preset on import."
No, it LR's fault, period. Every other program I have ever used displays my pictures just fine (Photo Mechanic, Breeze Browser, ADCSee, etc, etc, even Windows free Picture and Fax Viewer works fine. Yes, I can diddle with LR's settings and get nice previews but I don't want to diddle with every image. And it ain't my monitor profile - I can delete it or change it and the issue remains. LR makes different previews from standard software because it renders previews from RAW data and uses a non-standard color space. Camera calibration (or presets) is not a reasonable solution for everybody. I have several cameras, my kids have many different cameras, friends have different cameras and I get images from all these people - so I have a ton of very different images in different lighting and I am not about to setup numerous different calibrations or presets to see previews in LR when I get excellent previews from other standard software that uses embedded previews and produces great previews with no work whatsoever. All I am suggesting is the option to use embedded previews and a standard color space. Again I must ask why do some folks argue for lack of flexibility?
John McWilliams said about LR's power:
"The neat thing is you can make the image look just about anyway you want without loss of quality."
I could not agree more - LR is a good program! But, I don't want to diddle with every image. Most of them are fine, in fact, terrific right out of the camera. I just want to see them faster and I want them to match what other people see on standard non-color managed computers. If PM, BB, ACDSee and others can do it, so can LR.
David Edwards said:
"The images that I want to see in the Library section are RAW images with all the adjustments I have made to them and certainly not the embedded JPGs. If I wanted to see those I would have shot JPG."
This is fine and no doubt makes perfect sense for David's workflow. But, why advocate against an option to use embedded previews for those who would find that useful? I too shoot only RAW with my DSLR cameras because I want the best images and the ability to use all of LR's (or DPPs) conversion powers when appropriate. But, as I said above, the vast majority of my embedded previews are good enough right out of the camera as viewed in PM, BB or ACDSee so I don't need to make any adjustments. :) Only LR creates a problem my rendering less than desirable previews by default. I also want to note that embedded previews do, in fact, display all changes made in LR and I cannot tell any difference in quality on screen between embedded previews and rendered previews when I adjust the LR version to match the default embedded preview and compare them side-by-side in LR and PM, for example.
David also asked:
"Do you need a RAW converter or an application to display images?"
Both. Preferably in the same program. LR is supposed to be an all-in-one solution. It certainly will be when it gets more mature, I hope. I am a amateur so my main need is to see my pictures. I like them and enjoy them but LR is too slow importing and displaying thumbs and previews in Library mode and its previews usually need adjustment. So right now I am forced to use PM, BB or ACDSee all of which are way faster importing and browsing images and they use embedded previews that are fine, even excellent, by default.
I think Adobe is missing out on a significant number of potential users because LR does not provide the options I am requesting. I am certainly not the only person who wants faster importing and browsing and previews that look good by default. And, as I mentioned before, folks who use other RAW converters are also excluded since they cannot see the changes they make before importing images into LR because LR will not display embedded previews.
Regards
Bill Wood -
There is a bug in the spellchecking functionality when typing in the web view or while using Blogsy App. Why? Why my IPad crashes so often?
I have always found spell check to be "buggy" in every version of all of the iOS's that I have run on my original model iPad and my new iPad - especially when replying and typing posts in these forums. It works perfectly in every other application on my iPad but it has never worked perfectly in any web browser that I have used on my iPad - no matter what I have done to try to correct it. That is what MY experience has been with spell check on my iPads.
As for the crashes on your iPad try these basic troubleshooting steps.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit all apps and restart. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
I just bought my export pdf how can i start using it? if i sign in & look for my export pdf I am sent to the page to pay it again??? Could you help me please?
Hi florence,
Thanks but it did not work.
I bougth the Export PDF for power point but I do not see it in my account
and if I clicked in my orders buttons, nothing appears, it seems my
purchase is lost. Could you help me to verify it, I did it yesterdar
September 22, 2014 around 10:30 in the morning Mexico time. Or how do I get
my funds back?
Regards
Fabiola
2014-09-23 5:50 GMT-05:00 florencejohn <[email protected]>:
I just bought my export pdf but if I sing in and enter in my plan I
don't see it, why? when can I start using it? created by florencejohn
<https://forums.adobe.com/people/florencejohn> in Adobe ExportPDF - View
the full discussion <https://forums.adobe.com/message/6755125#6755125> -
Why am I recently unable to use my mouse to scroll email topics or content? I can only use the up and down arrows keys to scroll. I am able to use my mouse to scroll through internet searches. It only seems to have affected my email messages.
Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - Mavericks
Safe Mode - About -
Who uses Final Touch SD in conjunction with FCP? Why? Why not?
Who uses Final Touch SD in conjunction with FCP? Why? Why not?
LMIt is my understanding that Final Touch is much faster than daVinci.
You are in error...
Depends on the operator and the machine. With a DaVinci you are going tape to tape and the colorist is coloring each shot. When they are done, then they press play and all their settings apply in real time as the tapes roll.
With Final Touch, you have to render your final product after you do all the coloring. Typically the render will take longer than it takes a tape to play, depending on the machines processor power. But still, 4-5 hours for a 30-60 minute show...darn slow. If you had the same colorist on both, Final Touch would be slower.
BUT...the advantage is that you color BEFORE you go to tape. So doing your texted and textless outputs are darn easy.
Shane -
I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?
Hi kamfong,
Went to Settings where?
If you want to use your exisiting Apple ID on your iPad, you need to:
1. Go to Settings>iTunes & App Store and sign out the new ID, and then sign on the old one
2. Go to Settings>iCloud, scroll to the bottom and delete the iCloud account, and the sign back onto iCloud using the old ID
You still have not indindated why you are saying that using your old ID originally "didn't work". What do you mean by that? Did you get some sort of error when you tried to sign on with your exisiting Apple ID?
Cheers,
GB -
Why can't two different users use Itunes on the same computer with different log ins
Why can't two different users use Itunes on the same computer with different log ins
Pmorgan5672 wrote:
Why can't two different users use Itunes on the same computer with different log ins
They can, but not at the same time.
If one user left iTunes running, and another user tries to use iTunes from a different Windows user ID, that second user will get an error message. If they really want to use iTunes, they either have to beg the first user to log in and close iTunes, or else they have to restart the computer.
If you are asking the technical reason why, it is something about context switching. -
Apple_ID_card_declined_for_this_country
How can you expect the customer to have a LOCAL/COUNTRY Based Credit Card every where we go???
Last week I was on holiday in HK,
and
from my Hotel I was able to use m VN Credit Card with my Apple ID and purchase online!
Why THIS WEEK, can't I use my HSBC Platinum Credit Card from Vietnam,
for my Singapore Apple ID account ,
while working here in Vietnam???Unfortunately, this is a problem that is driven by the DRM Dictatorship. Despite the proliferation of mobile devices and the fact that there are many of us who do a lot of international travel, content providers don't want you to have access to their products outside of your homeland. The Balkanized mentality of the DRM Dictatorship is way out of touch with the modern world.
At least Apple, to its credit, allows you to use your accounts outside of your homeland as long as you have the proper credentials for them. Most other services use the more Draconian geolocation filtering which does require you to be physically present in your homeland. For the most part, you are not allowed to leave home if you want access to your favorite entertainment! -
I bought and downloaded PAGES on my iPAD. Why can't I seem to use it on my iMAC? Isn't there a simple way to just share it from my iPAD to my iMAC?
As stevejobsfan said. But also if your profile is correct and you are running system 10.7 on your iMac, you will not have much portability between the two either. Think of them as 2 different programs that just happen to have the same name.
OS 10.9 Mavericks' version of Pages has greater compatibility with the app version of it. But there are a lot of consequences to moving to Mavericks which should not be done lightly. Read around a bit on it before making any decision to upgrade. -
Why is itunes so hard to use - and why can't apple fix it?
why is itunes so hard to use - and why can't apple fix it
I dont know anybody who likes the way itunes works.'
This last version is beyond awful. It took an already hard to use program - but one that I had at least figured out and made it even harder.Wendy,
If you are experiencing a particular problem, please post specifics, and most likely someone here will be able to help. -
Why Scalar Subquery expression cannot be used in HAVING clauses?
Hi All,
I'm new to SQL. I'm confused with Scalar Subquery.
Is there anyone who can answer me why Scalar Subquery expression cannot be used in HAVING clauses.
Can you show me a example?
Thanks very much,
Xianyi.Ye
Edited by: 908428 on 2012-1-16 下午7:24Hi,
908428 wrote:
Hi Frank,
Thank you for your quick reply. I also agree with your point.
But when I read the book, "OCA Oracle Database SQL Certified Expert Exam Guide",( link to illegal copies of book removed by moderator )
on Page 359, it said that
Scalar subquery expressions cannot be used in the following locations:
1. In CHECK constraints
2. In GROUP BY clauses
3. In HAVING clauses
4. In a function-based index (which is coming up in Chapter 11)
5. As a DEFAULT value for a column
6. In the RETURNING clause of any DML statement
7. In the WHEN conditions of CASE
8. In the START WITH and CONNECT BY clauses, which we discuss in
Chapter 16.7 and 8 are wrong. Scalar sub-queries can be used in WHEN conditions and START WITH and CONNECT BY clauses. (At least in Oracle 10.2. Is the book based on some earlier version?)
Edited by: BluShadow on 17-Jan-2012 09:08 -
Why my credit card cannot be used in iTunes?
Why my credit card cannot be used in iTunes？
Very vague question
No way for anyone here to know -
Why cant I encode a .mov using Adobe Media Encoder CC to .mp4 or .ogv to use in Edge?
Why cant I encode a .mov using Adobe Media Encoder CC to .mp4 or .ogv to use in Edge?
Yeah, mp4 in HTML5 browsers is h.264 encoded - h.264 is a subset of MPEG-4 standard. More info here:
H.264/MPEG-4 AVC - Wikipedia, the free encyclopedia
For ease of use in AME, if you look at the right side of the UI in the presets, the Web Video > YouTube presets are the ones that will encode to h.264 with the mp4 extension.
hth,
Joe
Maybe you are looking for
-
When I try to access my iTunes from my second computer, I'm told I need to download iCloud. I did that, and when I sign in to iCloud, and enter my iTunes ID and password as directed, I receive a message saying that it is my correct iTunes ID, but th
-
Firefox allows Java Applet with elevated permissions
I ended up with a virus on Friday when I selected "View" on an HTML attachment from the GMail web interface. The attachment started up java and proceeded to install the malware "Desktop Security 2010" and make changes to my system startup. I'm wonder
-
2 BI systems are connected to one SAP ECC-system
HI, I have the following situation: we have one SAP ECC-system, and there is already one BI-system for one company code connected. I would like to connect now a second BI-system for another company code. Both BI-system uses more or less the same info
-
MULTIPAL SHIP TO PARTY IN ONE SALES ORDER
HI GURU I WANT TO KNOW ANY POSSIBALTY IN A ONE SALES ORDER WITH MULTIPAL SHIP TO PARTY AT HEADRE LEVEL NOT AT IEAM LEVEL . I WANT TO AT HEADER LEVEL IF YES THN PLZ HELP ME OUT THANKS & REGARDS VISHAL
-
Something new happened this moring, iTunes just won't play certain songs. If I start a playlist, then set random off, iTunes will start a song, then it may breifly highlight the next six or seven songs before it finds a song that it can play. Yes, th