Why will my address book not open it says not supported on this architecture

When I clicked on my address book widget a received a note that says "not supported on this architecture" and would not open my address book.
I have never had this problem before. Can anyone help me resolve this issue? I am not computer savy so please be patient with me.

When I select the AB application in the applications finder when I click on it it gives me the same message about not being supported by this architecture. I can tell you I bought this computer 3 years ago. Sorry I warned you I am NOT a computer person that is why I have a mac

Similar Messages

Firefox won't open: "Firefox isn't supported by this architecture" (Mac)

I had Firefox installed for several years, but it couldn't be updated: in 'preferences' the 'automatic update Firefox'-zone was grey (not active). So I decided to uninstall Firefox and reinstall it again after having downloaded the 6.0 version. Over the Ff-logo is a 'forbidden'-symbol and when I try to launch it, I get the above message (not supported by this architecture).
I have Mac OS X 10.5.8 on my iMac

OS X 10.5.* requires an Intel chip, if you don't have that, then it is not supported, and you would need to go back 3.6.21
For those that really need an earlier version of Firefox, find your system and the Firefox version you want in releases, download and start the install.
* ftp://ftp.mozilla.org/pub/firefox/releases/
:or with the latest of version 3
* http://www.mozilla.com/firefox/all-older.html
: Note Mac OS X 10.4 user, and Mac OS X 10.5 users without Intel cannot upgrade to Firefox 6.
When reinstalling Firefox from a download, Firefox must be down once the installation starts. When the installation finishes, don't let the install start firefox for you. Instead end the install and start Firefox in your normal manner, thus preventing creating a new profile which does not have your bookmarks cookies, etc (but your old profile would still be around and would).

Why doesnt address book display open

Why doesn't my address book show up? The program opens but I do not see anything on the screen?

When I select the AB application in the applications finder when I click on it it gives me the same message about not being supported by this architecture. I can tell you I bought this computer 3 years ago. Sorry I warned you I am NOT a computer person that is why I have a mac

Why does my address book not sync to iCloud?

Why does my address book not sync to iCloud?

I believe the duplicate address book accounts stems from the move from MobileMe to iCloud and both accounts still being active.
This is how I merged the two address books:
1) To make sure all the contacts are in both:
a) I selected On My Mac account - clicked on any address - Command A to select all - drag the contacts to the iCloud account - answered OK to merge and resolve duplicates.
b) same in reverse: select the iCloud account - click on an address - click Command A to select all - drag the contacts to the On My Mac account - answer OK to merge and resolve duplicates.
In system preferences I found an iCloud icon and also a MobileMe icon. I was logged in under both.
1) In the Address Book preferences I selected iCloud and unchecked Enable this account.
2) In the Address Book I selected iCloud and clicked on the minus “-” to remove that account – leaving only the local Mac address book.
3) I went into system preferences and logged out of MobileMe
4) In system preferences I opened iCloud and the “Contacts” was not selected (from above) and I selected it.
I got a dialog box asking if I wanted to merge the iCloud contact with the local contacts – clicked YES.
… spinning wheel for a minute … voila – only one address book account – iCloud with syncing to iCloud and my iPhone.

Why is my address book not syncing with my icloud contacts

Why is my address book not syncing with my icloud contacts?
I have my desk top and I have an iphone. I seem to have 2 different contacts list, 1 from my mac and the other icloud. If i add adress on my iphone to contact it does not sync to "my mac"

thank you very much that worked.first i thought if i restored then I would lose everything but of course I could re-sync so everything good now!!

Why won't address book close (or sync with ipod)

When I open address book to edit or add contacts, it will not close. The spinning wheel appears and then I have to force quit. I have also found that my ipod video will no longer sync with address book. It asks me to open the contact list whenever I try.
I tried deleting all my cards and reentering the information, but that has not helped. There is something wrong with the address app itself.
I used to have a palm device set up, but I have removed it and all palm files.
This is the info provided by console:
2007-09-07 08:58:36.995 Address Book[344] * -[NSCFString objectForKey:]: selector not recognized [self = 0x37b5b0]
2007-09-07 08:58:36.995 Address Book[344] ABMetaData workloop caught: * -[NSCFString objectForKey:]: selector not recognized [self = 0x37b5b0]
2007-09-07 09:00:36.862 Address Book[358] * -[NSCFString objectForKey:]: selector not recognized [self = 0x3f4420]
2007-09-07 09:00:36.862 Address Book[358] ABMetaData workloop caught: * -[NSCFString objectForKey:]: selector not recognized [self = 0x3f4420]
2007-09-07 09:00:47.145 AddressBookSync[363] AddressBookSync (client id: com.apple.AddressBook) error: Exception running AddressBookSync: * -[NSKeyedUnarchiver initForReadingWithData:]: incomprehensible archive (0x61, 0x3e, 0xa, 0x9, 0x59, 0x6e, 0x42, 0x73)
2007-09-07 09:02:36.654 Address Book[364] * -[NSCFString objectForKey:]: selector not recognized [self = 0x15e3d990]
2007-09-07 09:02:36.655 Address Book[364] ABMetaData workloop caught: * -[NSCFString objectForKey:]: selector not recognized [self = 0x15e3d990]
2007-09-07 09:02:59.929 AddressBookSync[367] AddressBookSync (client id: com.apple.AddressBook) error: Exception running AddressBookSync: * -[NSKeyedUnarchiver initForReadingWithData:]: incomprehensible archive (0x61, 0x3e, 0xa, 0x9, 0x59, 0x6e, 0x42, 0x73)

You are right theldje
BUT...This is no the way that is supposed to work.
I have to modify 300+ years! and it took me 5 min to convince AddressBook that I write fast enough to change the year
Besides, this is Apple. It's supposed to be user friendly.
I hope this people comes with an answer soon!
At any rate thank you for sharing your findings!
Cheers!

Address Book Never Opens

I have looked over many postings and have tried some of them. However, I am unable to get my address book to open (it just flashes in and out of the dock) at all. Here is a selection from my crash log. Any suggestions?
Date/Time: 2007-06-30 23:57:49.033 -0700
OS Version: 10.4.9 (Build 8P2137)
Report Version: 4
Command: Address Book
Path: /Applications/Address Book.app/Contents/MacOS/Address Book
Parent: WindowServer [55]
Version: 4.0.5 (487)
PID: 508
Thread: Unknown
Link (dyld) error:
Library not loaded: /System/Library/PrivateFrameworks/YahooSync.framework/Versions/A/YahooSync
Referenced from: /Applications/Address Book.app/Contents/MacOS/Address Book
Reason: image not found

You say you reinstalled Address Book, but haven’t explained how, which is essential information that you should have provided from the very beginning. It appears you “reinstalled” it by copying it from another computer running a different version of Mac OS X (10.4.10), which is a really bad idea.
Regardless of what the original problem was, fixing the problem you currently have would require either properly reinstalling Address Book, or updating the whole system to the version of Mac OS X that the version of Address Book you currently have installed expects to be running on.
Quit all the applications and verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, in the Finder go to /Applications/, move Address Book to the Trash, and reinstall it as described in the second part of the following article:
Custom installs in Mac OS X 10.4
Note that Address Book may appear grayed out in the installer, but will be checked if you check Applications there, and will be installed if it has been removed from the /Applications/ folder.
If the version of the system software on the Install discs is earlier than what you’re running now (and only in that case), then you must also reinstall the Combo Update for the type of computer and the version of Mac OS X you’re running, to bring Address Book back in sync with the rest of the system:
About the Mac OS X 10.4.9 Combo Update
Mac OS X 10.4.9 Combo Update for PowerPC
Mac OS X 10.4.9 Combo Update for Intel
Alternatively, you may want to install the latest Combo Update instead, as Henry suggested, which should make reinstalling Address Book itself first unnecessary:
About the Mac OS X 10.4.10 Combo Update
Mac OS X 10.4.10 Combo Update for PowerPC
Mac OS X 10.4.10 Combo Update for Intel
After installing the Combo Update, the computer may restart twice and the first restart may take several minutes. This is normal.
You may also want to read the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk and back up before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

Why will the front camera on my iphone 4 not work? On both the camera and snapchat.

Why will the front camera on my iphone 4 not work? On both my camera and snapchat

Hi there bananas321,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W.

Itunes will not open, message says library was created with earlier version. what now?,

itunes will not open, message says library was created with earlier version. what do i do?

Unless you just attempted to downgrade iTunes to an earlier verison this is probably a sign of a corrupt library.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2

Itunes will not open; it says it cannot be read because it was created by a newer version. What do I do

itunes will not open; it says it cannot read because it was created by a newer version. HELP!

Unless you just attempted to downgrade iTunes to an earlier verison this is probably a sign of a corrupt library.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2

Address book not supported on this architecture

Hi, can anyone point me in the right direction? My address book no longer opens and displays "You cannot open the application "Address Book" because it is not supported on this architecture." the icon itself has changed to sheets of paper with a ruler, pencil with a big circle and diagonal line.

I'm having the same problem. It happened after i upgraded to 10.5.8. It stopped working after the upgrade. I recovered the old address book from my time capsule from this morning, and that's when i got the "not supported on this architecture" message.
thanks
Message was edited by: mdgeek27

HT3952 Why can't Address Book allow me to add "spouse" to the print job?

I can add "spouse" to a card, so why can't Address Book allow me to print the name on the card plus the spouse name? So if I try to print "Ravi" I have the option in the print dialogue to add "Mei"? Seems simple, even Word can do it.

Hi,
It doesn't look like the "Country" field on the cards need to match. I changed one of the spouses to a different country and the label (as shown in the print dialogue panel as you suggested) still shows "John Smith and Jane Doe." Most of my country fields are blank.
It does matter that the Country Code be the same for both. After selecting the card and clicking on edit, the Country Code can be checked or changed by clicking on the address label (home, work, etc.) and moving the mouse down to "Change Address Format..." You'll see a long list of countries. If the cards for Jane and John don't have the same country code, the label won't show both names.
The lines of code like:
     <key>us</key>
     <true/>
in the ABRelatedNamesConfig.plist file determine which countries the related names functionality will work in. Using the plist shown in an earlier post, they need to live in ca (Canada), uk (United Kingdom), us (United States), or fr (France) and both need be be in the same one. Adding other country codes to the plist file should enable that country to work as well (I haven't tried it).
The related names functionality was removed with the release of Snow Leopard (10.6) so I've editied the plist file in 10.6, 10.7 and 10.8. All have worked.
The only other thing I noticed is that the following two lines shown in the earlier post are really one line in the plist file.
As shown in the earlier post, the code:
      <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
is really all on one line. Here is a screen shot of my plist file as viewed in TextWrangler:
The good news is we have 358 days to figure this out before Christmas.
Jay

My iphoto is not opening anymore..a pop up says "it cannot be open b/c it's not supported on this architecture." Why? It worked fine until now.

a pop up says "it cannot be open b/c it's not supported on this architecture." Why? It worked fine until now.
What can I do so that I can open iphoto. I have so many photos in the application.

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

HT1386 Address book on my mac is not syncing with my iPhone

Address book on my mac is not syncronising with my iPhone, address book is not affected, but iPhone loses all contacts after syncronising, any help would be appreciated. Mike

1. Connect the iPad to your computer via USB.
2. Open iTunes.
3. Select the iPad, then Books on the "tabs" along the top.
4. Select "Sync Books" if it is not selected, and "all books."
5 Click the "Sync" button in the lower right corner.

Address book of my mac does not show all my contacts in iphone. What do i do??

Address book of my mac does not show all my contacts in iphone. What do i do??

iCloud, which replaced MobileMe, requires OS X Lion (10.7.5) or higher. You will need to upgrade to OS X Lion higher in order to set up iCloud on your Mac. First check to see if your system meets the system requirements to upgrade.
Lion system requirements are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Mountain Lion and Mavericks requirements are the same, as listed here: http://support.apple.com/kb/HT5842.
If you can run Mavericks, you can download a free upgrade from the Mac App Store. If your system can only run Lion, you can go here to purchase a redemption code to download it from the Mac App Store. If you prefer Mountain Lion for software compatibility reasons, you can go here to purchase a redemption code to download it from the Mac App Store.
After upgrading, you will find iCloud in System Preferences>iCloud on your Mac, and can set it up as explained here: http://www.apple.com/icloud/setup/mac.html.
Before upgrading, you may want to check the compatibility of your existing applications by checking here: http://roaringapps.com/apps:table. Also be aware that older PPC programs such as AppleWorks and Office 2004 for Mac will not run on OS X Lion or higher.

Why will my address book not open it says not supported on this architecture

Similar Messages

Maybe you are looking for