Why will my photoshop elements icon not start the program??

I just downloaded photoshop elements, and it worked fine for the first 2 days. However, whenever I try to open photoshop now the program will not open! It says "do you want to run this file?" and I clicked "Yes" but then nothing happens! At the most the welcome page will pop up and I am able to open Elements organizer, but not photoshop! I have tried uninstalling and re-installing the program and everything else the support page suggests. Anyone have experience with this problem?

I'm not real computer literate. Might you know where'd I would find it? There are 5 disks in the softwear, the first 3 are install files dependent on what Windows program is loaded. The last two say Content. Thanks for your help!

Similar Messages

My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it via internet the first time december 2013?)

My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it from Adobe via internet the first time december 2013?)

Did you download the Basic/Free version?
I also thought the Trial period was as long as you needed!?
What is your Warranty and Return Policy?
You get to use VueScan for as long as you want before you buy it, so we recommend you test it before you buy it to make sure it meets your needs.
All sales are final and there are no refunds.
Isn't this a bit harsh? Naah I actually prefer to solve problems, and if I offer refunds, people give up too easily. If I can't solve your problem after you send a few Problem Reports (see above), I'm happy to give a refund.
http://www.hamrick.com/sup.html#q

Why will my Adobe Reader 9 not open the downloaded CA6 Beta file?

Why will my Adobe Reader 9 not open the downloaded CS6 Beta file?

Hi,
If your asking about the photoshopcs6_p1_installnotes.pdf, then it should open with Adobe Reader 9. It does for me with Adobe Reader 9 (9.5.0) on OSX 10.5.8.
The PDF is saved to version 1.4.
regards,
steve

3D in photoshop cc does not work, the program will be cut off automatically

3D in photoshop cc does not work, the program will be cut off automatically.What can I do?

my problem is as follows.If I want to make a 3d creation in photoshop, then
asked me to cc in clicking function 3D, after new JUST by layer and then
JUST PRESET and then sphere. Then opens a new window where in it says: you
are about to make a 3d layer.Do you want to switch on the 3d workspace? I
choose YES Then I get to see a new window stating that the program no
longer work properly and quits. Am I doing something wrong or is my pc not
suitable? data from my laptop are: processor a4-5000 AMD APU with radion
(tm) HD graphics 64-bit operating system, hr 4.00 1.50 Gb x64processor
honor!
mijn probleem is als volgt.Als ik een 3d creatie wil maken in photoshop cc,
dan wordt mij gevraagt om in functie 3D aan te klikken, daarna NIEUW NET
VAN LAAG en dan VOORINSTELLING VOOR NET en dan BOL.
Dan opend zich een nieuw venster waar in staat:u staat op het punt een 3d
laag te maken.Wilt u overschakelen op de 3d werkruimte?
Ik kies dan voor JA
Vervolgens krijg ik een nieuw venster te zien waarin staat dat het
programma niet goed meer werkt en wordt afgesloten.
Doe ik iets verkeerd of is mijn pc niet geschikt?
gegevens van mijn laptop zijn :
processor AMD a4-5000 APU with radion(tm) HD graphics 1.50 hr
4.00 Gb
64 bits besturingsysteem, x64processor
2014-12-18 10:14 GMT+01:00 c.pfaffenbichler <[email protected]>:
3D in photoshop cc does not work, the program will be cut off
automatically created by c.pfaffenbichler
<https://forums.adobe.com/people/c.pfaffenbichler> in *Photoshop General
Discussion* - View the full discussion
<https://forums.adobe.com/message/7025920#7025920>

Why does Photoshop elements 9 not start once I downloaded Wacom drivers?

I use Photoshop Elements 9, it is fully updated.
I recently switched from a bamboo tablet to an intuos. Previously, my bamboo worked perfectly. Elements could detect pen pressure and worked fine. Now, elements (the editor, not the organizer) has stopped booting.
However, I recently got an intuos and once I downloaded the drivers, Photoshop would stop booting. For example:
I try to open up a photoshop file, photoshop would stop responding.
I open up the welcome screen and click on edit, the edit button shows that loading sign for awhile before returning back to the normal edit button. After that, nothing happens and the editor doesn't open.
I try to open the editor directly, it stops responding.
There were however less than ideal ways I could force elements to boot. I could open up Wacom Tablet Properties, and delete the Adobe Photoshop Elements preference over there. When I do that, photoshop boots instantly even if it was in the middle of not responding. Even when I try to boot with the welcome screen and the edit button just fades, as soon as I delete the preference, elements boots. Even if I was waiting for fifteen or twenty minutes before deleting the preference, elements would boot. Another way I can get photoshop to open is using the wacom tablet preference file utility to delete the preference.
However, when this happens, pen pressure doesn't work and the cursor is really laggy. The disc keeps appearing over the cursor.
Other stuff I've tried:
Uninstalling and reinstalling the drivers. I've tried using the disc the tablet came with. I've also tried the installing the driver from the website.
I'm not sure about resetting the photoshop elements preferences. I've tried clicking ctrl+shift+alt and clicking to open photoshop but it just opens up the properties window. (But isn't what I did with wacom tablet preference utilities achieving the same thing?)
I greatly appreciate any advice you could give me! Like if this is even the proper place to ask?

Specifically, this:
http://forums.adobe.com/message/5860819
But it is also very important to delete any existing preferences after a major OS X upgrade. For PSE 6 that would be:
com.adobe.Photoshop.Elements.plist
Adobe Photoshop Elements 6 paths
Adobe Photoshop Elements 6 settings
They're in your username>library>preferences. Here's how to find it in 10.9:
http://www.cultofmac.com/251544/mavericks-makes-it-way-easier-to-access-your-library-folde r-os-x-tips/

Question: Why will my Photoshop Elements 10 Software not reload on my computer?

I have been using Photoshop Elements 10 and Premier Elements 10 for some time now on my computer. Less than a month ago, i had a bad virus on my computer and had to take it to a Computer Tech shop to be repaired. They had to totally clean off the computer to eliminate the virus, it took two tries to get it clean.
I now can not get my software to reload. I put the disc in and the 'install' screen does not come up. How can i get it to reload? Any help? I do have the original box with the Serial Numbers ....but the screen to load and note them is not even coming up.
Please Advise?
Athena

I'm not real computer literate. Might you know where'd I would find it? There are 5 disks in the softwear, the first 3 are install files dependent on what Windows program is loaded. The last two say Content. Thanks for your help!

Photoshop Elements does not start for the second time

Hello,
our customer has problem with PS Elements 12. He can start it for the first time and everything works fine. But when he closes the program and tries to start it again, it will not start. It doesnt even say anything. No error mesages or anything. He tried to instal a trial version of PS E 13 and it does the same thing.
He's running Win 7 SP1 64 bit
Any sugestions? Thank you.

Hi,
It has been known that the Welcome screen sometimes fails to close properly and prevents a second load.
Most people have overcome the problem by creating a shortcut direct to the two main applications.
Organizer: "C:\Program Files (x86)\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe"
Editor: "C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
Brian

Photoshop Elements 12 not starting

I recently bought a copy of Photoshop Elements 12, but it just won't start. Sometimes the splaschreen is loaded, but the editor won't launch.
I'm running Windows 7.
Can you please advise?

Hi Brian,
Thank you for the advice, I will keep that in mind.
If I succeed, I will let you know.
I am living in The Netherlands.
Ineke
Verstuurd vanaf mijn iPad
Op 25 jun. 2014 om 19:29 heeft "Little_Pale_Face" <[email protected]> het volgende geschreven:
I just bought Photoshop elements 12, installation was no problem, starting organizer is no problem, but editor will not start up. What do I do wrong ?
created by Little_Pale_Face in Photoshop Elements - View the full discussion
Hi,
I meant create a new user account on your laptop. There are some settings that are stored on a per user basis so creating a new user may clear a setting.
However, that may not help in your case - I have been trying to help someone else and got your two problems mixed up.
The only reason that I had the editor fail before was resolved by running the disk cleanup and check tools.
As you have returned the product, you could try installing the trial version. If you get it to work, then you may be able to buy a boxed version from Amazon or similar. I'm not sure where you are but the boxed version can often be on special offer from the big stores at a cheaper price.
Brian
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6496317#6496317
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Photoshop Elements does not start under Windows Vista

The Twain-Module of my Canon CanoScan FS4000US Filmscanner works only under Windows Vista (no newer OS!). Fortunately I own an older Notebook with Vista as OS, so I have PSE Version 5.0.2 installed and use it to import my old color negatives via the twain module. Fine! It even works with 42 bit. But suddenly, PSE refuses to start and freezes at the window loading the libraries. At this stage it can only be stopped with the help of the task manager. A little search in the internet informs me that I am not the only user with that specific problem. Any help from Adobe?

After a view days of searching a found a solution: I installed the MS Visual C++ Reditributable für Visual Studio 2012 Update 4 (both 32 bit and 64 bit) and now Photoshop Elements runs without any problems.

After Successfull Installation of Photoshop Element 3.0 On Mac OS 10.6.8, Photoshop Elements does not start saying that personalization information is invalid or missing

I have installed Photoshop Elements 3.0 from original disk on my MacBook Pro with Mac OS 10.6.8. The installation was successful. However, when I try to run Photoshop Elements, it does not start, with the message "Could not complete your request because of missing or invalid personalization information". I uninstalled Adobe Elements and deleted all Adobe files from both the System Library Preferences and from the User Library Preference. Then tried the installation again. The installation was successful, but the application fails to start with the same missing/invalid-personalization-information message.
Please advise

I am sorry Invalid Personalization but Photoshop Elements 3.0 requires a PowerPC processor or Rosetta installed in order to function. You can find the system requirements at System requirements | Adobe Photoshop Elements.
You may want to try following the steps listed at Mac OS X 10.6: If you need to install Rosetta to attempt to install Rosetta. That may still not resolve your licensing issue however as the application was also designed for Mac OS 10.2.8 and 10.3.

Photoshop Elements does not start

Hello,
I bought and installed Photoshop Elements a view month ago and it worked fine. Yesterday I wanted to edit a photo, but it was not possible to do any changes to the photo, because the program crashed every time I tried. So I reinstalled the program and now it doesn't even start anymore. If I start it over the select screen (Organizer/Editor) it says "Photoshop Elements funtkioniert nicht mehr, es wird nach einer Lösung gesucht" and if I start the editor directly I get an error message: PhotoshopElementsEditor.exe - Einsprungpunkt nicht gefunden. Der Prozedureinsprungpunkt "__crtCreateSymbolicLinkW" wurde in der DLL "MSVCR110.dll" nicht gefunden. Does anyone have a solution to this problem?

After a view days of searching a found a solution: I installed the MS Visual C++ Reditributable für Visual Studio 2012 Update 4 (both 32 bit and 64 bit) and now Photoshop Elements runs without any problems.

Photoshop elements 6 not starting up after install. Any ideas whats wrong?

I Have just installed Photoshop 6 on my new computer, Windows Vista home basic with service pack 1 32-bit os. It installs fine. However, when I click on the icon to start it up nothing happens. Can anyone help me.

Try installing the license-service update:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Install_the_licensing-s ervice

I have Adobe Photoshop Elements 10. But the program can not run in Windows 8.1. Why not?

I reinstalled Photoshop elements 10 on my new computer. the computer run Windows 8.1
My computer has two harddisks. One of them is from the old computer, and the other is a new one.

Is the Editor correctly installed?
Go to C:Program Files (x86) >> Adobe
Find the PSE folder and then right-click on the Editor application and choose "Run As Administrator"

Installing Photoshop Elements did not start

I successfully downloaded PS Elements and PRemier elements onto a Windows 8.1 PC. I retrieved the product serial numbers. I clicked on "Install" but nothing happened. What now?

what file(s) did you download (names and extensions) and what file did you click?

PhotoShop Elements does not launch

I purchased PhotoShop Elements; did not download the trail version. It worked nice; I liked it. I then had to do a system restore unrelated to Photoshop. Afterwards, I re-installed PhotoShop. When I launch PhotoShop I have the option to select the Organizer or Photo Editor. I can't launch either; a message appears that says my trial has expired. I have spent 3 hours with Adobe tech support and they could not get it to work. I was told if I still had the issue, call tech support again...this isn't exactly tech support. They also told me that re-installing this software will cause it to NOT launch. Has anyone else experienced this? Maybe someone out there has and found a solution that will work for me. Thanks!

Good day!
Please check out
http://forums.adobe.com/community/photoshop_elements
Regards,
Pfaffenbichler

Why will my photoshop elements icon not start the program??

Similar Messages

Maybe you are looking for