Why will my PSE 11 Org/PhotoMail not work?

Every time I attempt to Share using Photo Email feature in PSE 11 running under 64-bit Windows 7 on an HP Pavilion machine, the PSE 11 application fails and shuts down. Here is possibly an important clue: The function worked upon initial installation. But then I check for and found an update available and installed it. Ever since, this feature does not work!

Hi,
At what point does it fail?
I have seen this sort of failure at the point of selecting the frame and it was caused by a permissions problem.
Try this:
Close elements
Create a shortcut on your desktop which goes direct to the organizer
Right click on that shortcut and select "Run as Administrator" (even if you are an administrator)
Now try your Photomail again
If it does work, you only need to do this once, it seems to correct itself after that.
Good luck
Brian

Similar Messages

  • Why will the new version of picasa not work on my imac

    Why will my upgraded version of picasa not work on my IMac???HELP
    It will start to load and then error message and cuts off. ( Picasa is photo editing software)

    Picasa is not an Apple product.
    You should ask the developers why they have not updated their application.

  • Why will my 7th generation ipod classic not work in my 2006 VW Passat?

    I equipped my vehicle with the VW iPod connector that was hardwired into my vehicle.  I have used both a 1st Gen iPod video/classic as well as a 4th Gen iPod nano with no issues.  However, the 7th gen iPod classic I recently purchased will not play music through my car's stereo system.  It will charge, but is otherwise undetected by the vehicle. 

    Because it isn't designed to do that. The only Bluetooth profiles on the Nano are A2DP (Stereo Bluetooth) and low energy (think heart monitor). You cannot sync with it.

  • Why will my IPAD camera connection kit not work?

    My IPAD camera connection kit won't work! Help! Tried to reboot and had no luck!

    What model iPad?
    Strange that neithere works. Are you sure the kit is securely plugged into the iPad?
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
     Cheers, Tom

  • Why will the iOS 7 download but not install?

    why will the iOS 7 download but not install?

    IOS 7 stinks wrote:
    I made the mistake go read the internet
    It would take a very long time to read the entire Internet. There are billions of pages.

  • Why will icloud update my contacts, but not my calendar (ie birthdays) I have the "show birthday calendar" ticked

    why will icloud update my contacts, but not my calendar (ie birthdays) I have the "show birthday calendar" ticked

    why will icloud update my contacts, but not my calendar (ie birthdays) I have the "show birthday calendar" ticked

  • Why is my adobe photoshop elements 12 not working. it says initializing and then it says there is an error and closes itself

    why is my adobe photoshop elements 12 not working. it says initializing then error and shuts itself down.

    Three things you can try:
    1. Clean the superdrive with a proprietory CD/DVD lens cleaner that uses tiny brushes.
    2. Perform an SMC reset:
    Resetting the SMC (System Management Controller) on Intel-based Macs:
    http://support.apple.com/kb/ht3964  and
    http://support.apple.com/kb/HT1237?viewlocale=en_US
    Resetting your Mac's PRAM and NVRAM:
    http://support.apple.com/kb/ht1379
    If you are using a Wireless Keyboard:
    http://support.apple.com/kb/TS3273
    3. Try the free DVD player VLC:
    http://www.videolan.org/vlc/
    which performs better than the built-in DVD Player.

  • HT5622 Why is my Apple ID or password not working anymore after I reset my password?

    Why is my Apple ID or password not working anymore after I reset my password?
    It keep asking my password... I have reset it, then, when I enter the new password, it's not accepted...

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • Why is the sound on my Envy not working?

    Why is the sound on my Envy not working?  Checked all volume levels, mute, settings etc.

    Hello NellyMac,
    You state you are not getting any sound from your laptop, is that correct? I will be happy to help you.
    Can you please provide the full make and model of the computer you have, If you are unsure where to locate that information have a look at this link for help if needed.
    Please respond back at your earliest convenience.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • I have a 2010 Macbook Pro and am a very new user to Mac community. My Mac is just hanging and I am unable to shut it down or do anything at all.  I left it for 2.5 days hoping the battery will run flat but it is not working. Pls help! I am desperate. Tx

    I have a 2010 Macbook Pro and am a very new user to Mac community only started to use this PC a few weeks ago.
    My Mac is just hanging and I am unable to shut it down or do anything at all.  I left it for 2.5 days hoping the battery will run flat but it is not working. Pls help! I am desperate. Tx

    In order to resolve the issue if it occurs again, more info would be helpful as to what occurred prior to the "hang." One potential fix would be to try a Safe Boot:
    After the Mac is completely shut down, push the power button and immediately after the startup tone, hold down the Shift key. The Shift key should be held as soon as possible after the startup tone but not before.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    There should be a message that says "SafeBoot." After the Mac is completely booted, try restarting and see if the issue is gone.

  • In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame...

    In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame. To help protect the security of information you enter into this website, the publisher of this content does not allow it to be displayed in a frame ". On Chrome I get nothing but loading.

    Hi,
     This error is generally specific to Internet Explorer and has two possible causes. The most likely explanation is that your browser has unusual browser security settings. I would recommend you try
    resetting your security settings to defaults (varies by version but all essentially the same). You may also have to turn off
    Protected Mode which is enabled by default on some systems. If you’re seeing this error (or a version of it) outside Internet Explorer, you may have a server-level setting that is preventing your content from being framed.
    Reference:https://social.technet.microsoft.com/Forums/exchange/en-US/1460c5a5-6242-4402-9f6b-bc581bf56478/content-cannot-be-displayed-in-a-frame-when-trying-to-add-item?forum=sharepointgeneral
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • Any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station pls

    any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station please ? classic working fine, so not the fault of the station itself ? it's been bought as a present for my father & he's confused !

    Check the headphone jack with a flashlight and clean it if necessary. The jack on a new Nano is very tight, be sure you push the headset jack all the way in, the plastic on the headset jack should be flush with the body of the Nano.

  • HT1338 why the map in iphone 5 its not working here United Arab Emirates

    why the map in iphone 5 its not working here United Arab Emirates

    Am having same problem with my iphone 5 ... i can't use facebook and weather app only ... other apps are working perfectly fine ... my phone is on fw 6.0.2 and i think its my firmware problem let me know how did u resolved your's?

  • My mac is running 10.7.2 and wondering why the "find my mac" feature is not working. Instead, it says I need to system upgrade requires.. I believe it's already upgraded together with the 10.7.2

    My mac is running 10.7.2 and wondering why the "find my mac" feature is not working. Instead, it says I need to system upgrade requires.. I believe it's already upgraded together with the 10.7.2

    i get the spinning beach ball in all of my applications
    have a look at this article: Troubleshoot the spinning beach ball

  • Now that I moved my itunes to a new computer why will my iphone and ipod touch not sync?

    I just switched my itunes to my new laptop from my desktop (which no longer works).  Everything seemed to be ok after I updated to the newest version of itunes.  Now I cannot get my iphone (3G) and my ipod touch to sync at all.  In fact when I plugged in my ipod touch it erased everything I had on there.  I know these are older devices but I had no problems with syncing previously so why now?  Even the backups will not work. 

    You can only sync to one computer/iTunes library. If you switch iTunes will erase the iPod and replaces the media with what is in the iTunes library of the new computer.
    You should have done this:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
    You said "Even the backups will not work.". What happens when you try to restore from backup?

Maybe you are looking for

  • Can anyone tell me why my mac keeps crashing? I'm new to mac.

    hiiii im new to mac and iv had my imac 3 days now and im finding it crashing like every hour or less? please help as im debating on taking it back.

  • Persistent Settings In Pseudo Device Driver

    I am writing a meta device driver and need a way to make device settings persistent between reboots. I've tried the property update (ddi_prop_update_int) but these disappear on reboot. Is there a way to do this? Simon

  • Using Crystal Reports on a Citrix server

    Post Author: rmarty CA Forum: Deployment I have a 2003 .net windows application that internal crystal reports built in using Crystal 11 SP2.  On a basic client the merge modules and the reports run fine without incident. This does not work on a Citri

  • 802.1x with Switch SRW2024-Web

    Hi@all, i want to implement a port based NAC with Windows Server 2008 NPS acting as RADIUS and some Linksys/Cisco SRW2024 - WebView Switches, using EAPoL and MD5-Auth. (SRW2024: http://www.cisco.com/en/US/products/ps9989/index.html) I am able to auth

  • Asynchronous Web Service PI 7.1

    Hey guys, currently we are trying to configure and consume the enterprise services of SAP Transportation Management 7.0. These services use a asynchronous communication method and were created by SAP. I'm very new in this field, I couldn't find any g