Why will my spot remover tool not work?!

My tools all of a sudden will not work!! Why?

Please don't start any more threads. One is enough.
Good luck.

Similar Messages

  • Lightroom 5.5 spot removal tool not working

    Hi all.
    I've just updated to lightroom 5.5 and discovered my spot removal tool isnt working as before. The opacity is set to 100 and the brush size is set in the middle. It won't work for any of my images event after restarting lightroom. Any ideas anyone?
    Thanks
    Neil

    Hi Hal
    The cursor doesn't change to the circle. There is just no response at all. It appears to be an issue with all the images in one folder and doesn't seem to affect other folders.
    Also I have noticed when in library mode, it has 1:1 size selected and when I click in to develop, it resets back to Fit and won't let me select the 1:1 size unless I click 3:1 then back to 1:1. Sounds odd I know but I will keep trying. I cant help but wonder if its something I have selected by mistake somewhere.
    Thanks
    Neil

  • I can not get my spot removal tool to work at all!!

    I have tried numerous times to get my spot removal tool to work; without success.   I have read tons about it and nothing works.  What is going on?? Neither clone nor heal does anything!
    I am very frustrated with Lightroom 3!
    tc

    Two things to check.

  • PH3100U-1EXB Sleep Removal Tool not working

    I apologize in advance if I am in the wrong category, but this is a "laptop accessory."
    I have a 1TB external drive connected via Esata to my work laptop. My work laptop won't run exe files for obvious reasons. I had to reformat the drive to NTFS. Also, the security software encrypted the drive upon connection of esata. My personal laptop has no esata connection. When I connect the drive to my personal laptop via usb, the Toshiba sleep removal tool cannot find the drive. Is this because it's not connected via Esata, or is it because the drive has been reformatted?
    PS, I couldn't care less about the backup/monitoring software that came with the drive
    Thanks in advance for your time.
    Sincerely Sean

    I see the posts here about the sleep removal tool not being necessary for the GEN 2 drives, But I can't see any information on how to disable it on the Gen 2 drives. I'm trying to disable the sleep mode so I can use the drive via the esata port on a scientific atlanta 8300HD DVR, hence the windows power managment driver is not going to be able to set it to no-sleep at power on. Is there a jumper inside the drive enclosure, or on the drive, or some other piece of software that can set the default to disable the sleep mode. any help out there?

  • Why will a Leopard backup DVD not work on G5.

    A couple of Leopard issues:
    1, When I a make a dvd backup of my Leopard dvd using either Disk Utility or Toast it will work fine on the intel but will be spit out of the G5. The G5 cannot make double layer so I must rely on a computer that does! My G4 can make double layer but it is 400 miles away now! When is a copy not a copy?
    2, Leopard disk utility repair permissions takes a long long time. It gives the errors discussed on other posts but why such a long time?? By the way, the Diskwarrior site gives some cautions about repairing permissions but does not address the inordinate amount of time, with respect
    to Tiger, issue.
    Other than the above and some applications no longer launching or working properly I appear to have two stable systems working. As I have done for years I install a new OS on an external drive, find out what works and what don't and in a few weeks upgrade the main drive. I usually use Supperdupper but found out it does not work on Leopard, a least for me! So I have not yet figured out how to make an archive copy of a Leopard system. Hard drives are like people, they eventually die. I have not tried a restore using Time Machine so I do not have any faith in it yet!

    Roger Carlson2 wrote:
    A couple of Leopard issues:
    1, When I a make a dvd backup of my Leopard dvd using either Disk Utility or Toast it will work fine on the intel but will be spit out of the G5. The G5 cannot make double layer so I must rely on a computer that does! My G4 can make double layer but it is 400 miles away now! When is a copy not a copy?
    The fact that your G5 cannot make a dl DVD means nothing. I am sure it can read it, and that's all that counts. If you can play a movie on the G5, it can read a dual-layer DVD. You have some other issue there.
    I would also point out that not all DVD DL blanks are equal and some machines can only read the + and some only the - types. A homemade dual-layer DVD is not the same as a commercial one.
    2, Leopard disk utility repair permissions takes a long long time. It gives the errors discussed on other posts but why such a long time?? By the way, the Diskwarrior site gives some cautions about repairing permissions but does not address the inordinate amount of time, with respect
    to Tiger, issue.
    This is a known "issue" which has been discussed here many times. We do not know why it takes a long time. Only Apple knows.
    Other than the above and some applications no longer launching or working properly I appear to have two stable systems working. As I have done for years I install a new OS on an external drive, find out what works and what don't and in a few weeks upgrade the main drive. I usually use Supperdupper but found out it does not work on Leopard, a least for me! So I have not yet figured out how to make an archive copy of a Leopard system. Hard drives are like people, they eventually die. I have not tried a restore using Time Machine so I do not have any faith in it yet!
    Have you looked into CarbonCopy which claims to be Leopard compatible?
    Message was edited by: nerowolfe

  • My Spot removal tool not cleaning up spots

    Help--I'm having issues removing a huge spot in the sky on my photos in LR5.
    It seems to work everywhere else, but won't remove the big ugly spot against a blue sky. Any suggestions?
    Thank you.

    You might post a before and an after screenshot of the spot and the unsuccessful removal and see if anyone can give you more hints about what to do.

  • Spot remover tool / healing brush. How do I get the brush to show up and work??

    It seems I can only get the spot remover tool to work on certain photos and in certain areas of said photos . On the one picture I really need this for--where the problem started--I had used it once without much success (it was working then, but I didn't do it right). So I left the picture and worked on another. When I came back to the first picture, I brought up an earlier version of it, before the initial spot removal, to work on. Now I can't get the brush to even show up on the frame, although other tools are working fine. I've checked on other pictures and it seems that many times the spot remover brush won't show up. WhY???

    Great. There are other keyboard shortcuts when using this tool like the forward slash key and holding down shift if cloning an area that is a straight line. And don’t forget you can click on the word reset. Take a look at this short video tutorial from Adobe TV.
    http://tv.adobe.com/watch/adobe-evangelists-julieanne-kost/lightroom-5-advanced-healing-br ush-and-visualization-tool/

  • The spot removal tool in Lightroom 5 has suddenly started running REALLY slowly, to the point of being unusable.  What should I do?!

    My spot removal tool was working absolutely fine and then suddenly started running really slowly.  I now can't adjust easily as there's a lag of about 5 seconds between moving the mouse and the icon moving on screen. I've tried splitting my catalog (which is not actually that big - less than 3000 photos) but that doesn't work.  Help!  I really need to do some photo editing and I'm running really far behind work-wise!

    This has nothing to do with catalog size. Splitting the catalog won't help.
    This is a common issue with the spot removal tool, if you remove LOTS of spots in a single photo, it will begin to run slowly; the more spots you remove, the slower it will get. If you have a photo which requires huge amounts of spot removal, it would be better to do this in a "desctructive editor" like Photoshop or Photoshop Elements.

  • Only circles for the spot removal tool

    Hey all!
    I'm running into what seems a simple issue but there's no information about this on line, or at least not something that can help me.
    When I choose the spot removal tool and click and drag in order to get a linear edit (not a circle) instead of the desired effect, the circle gets bigger. I can't seem to be able to just correct a non-circular smudge.
    I've checked on line, even some tutorials, but everybody seems to just click and drag and it works.
    Any ideas?

    Which camera raw version are you using.  Spot removal was only circles ("spots") in CS6 and earlier.  CC added an enhanced spot removal tool that works like photoshop's healing brush tool.

  • Lightroom 5 Spot Removal Tool Lags and is not usable (Temp Workaround?)

    Lightroom 5 Spot Removal Tool Lags and is not usable.  The Spot Removal Tool really is pretty essential to the usability and workflow of Lightroom 5.  Checking the other tools alongside the Spot Removal Tool, it appears that the Red Eye Correction Tool is also affected.  Might it have something to do with the Process Version?  I noticed when working with some older image files (using the 2010 Process Version), the Spot Removal Tool worked as previously experienced. Current images that have been "upgraded" to the New Process Version (2012) are now incapable of utilizing the Spot Removal Tool due to its very laggy and sporadic response.  I've never experienced an issue like this with Lightroom (LR user since LR2).  Mac OSX 10.7.5, 3.4GHz i7, 8GB 1333MHz DDR3
    I've also noticed that reprocessing an image can revert the Spot Removal Tool to "useful" again (reverting from 2012 to 2010, then back to 2012).  Doesn't always work and doesn't always "stick", as closing and reopenling LR usually reinitiates the laggy Spot Removal Tool.
    I haven't seen anyone mention the Process Version as a potential culprit, nor have I seen any reliable workarounds.  Reprocessing an image (or set of images) at least works for me for a while, though it would sure be nice to not have continue reprocessing images every time I open/use Lightroom 5.
    LR5 is great and is all I need for the majority of my images.  Unfortunately for me, though, that usability also necessitates the Spot Removal Tool's unhindered functionality.

    For some reason, it's clear that not everyone is experiencing such a massive slowdown / bottleneck when it comes to the Spot Removal Tool.  If all users experienced this issue to this degree, they would have been clamoring for Adobe to address and rectify it immediately.
    With all due respect, Sean, to make a suggestion like that proves you do not experience / have not experienced this issue / don't understand the severity to which this issue can affect workflow; simply "turning off noise reduction and lens correction" is definitely not a fix.  If 16GB of RAM doesn't fix the issue, do you really think simply turning off noise reduction will?  And as Bert Nase points out, to do that to large volumes of images increases workflow in a program designed to streamline workflow for large volumes of images.
    1- One option is to change the process version in your first photo (2003/2010), then copy-paste that develop setting to the rest of your images.  This will get all of your images to the point in your workflow where you can use the Spot Removal Tool on each image.  Once spot removal is done, reconvert each image back to the current process version (2012) then re-accomplish the spots that reconverting lost.
    2- Configuring presets is one work-around option, though you will need at least couple of them tailored to your workflow.
    3- Changing your import settings to an earlier Process Version is an option, then accomplishing Spot Removal on each photo, then updating the Process Version on one and copy/paste to the rest, then re-accomplishing for each photo the spots lost in the conversion and continuing your workflow from there.
    Readers of this thread can use the link above, but it can introduce its own issues, too.  As noted, switching back-and-forth between Process Versions can delete some of your already-corrected spots and you'll have to re-correct them.  Worse, a window prompt asking to create a virtual copy or proof will occasionally begin popping up.. closing the window, clicking "cancel", or choosing any other option in that pop-up window won't be "remembered" and the window pops back up with any further "click" on the image.  Lightroom has to be shut down and the computer restarted for the issue to reset.
    Yes, it's very frustrating and time consuming to say the least.  So, unfortunately there is no fix, still only work-arounds.  Hopefully this issue will be addressed and remedied in either the coming release of 5.2 (doubtful) or the Cloud version of Photoshop + Lightroom.

  • I have lightroom 5 but the visualize spot removal tool is not showing up?

    I have lightroom 5 and the visualize spot removal tool is not showing up. I have updated the software and restarted my computer and its still not showing up. Why is that?

    Press the T key to show the toolbar

  • Why is my lightroom cursor freezing and jumping when using spot removal tool?

    I have just swapped from PC to Mac and in the process upgraded from LR 3 to LR 4.  I have always had some minor issues with the spot removal tool occassionally jamming up or not working smoothly and taking a long time in LR3 on PC, but so far using the tool in LR 4 on Mac has been painful.  It is like it is slow to load, and then the cursor/spot removal circle just dissapears or freezes??? 
    This is driving me mental - I want to be able to fix minor blemishes etc quickly in LR instead of having to go to PS.
    Can anyone give me any advice???
    Thanks,
    Melanie

    What kind of mouse or graphics tablet are you using?  That sounds like a driver issue.  And what are the specs of your machine?  There was a graphics driver problem a while back which were causing brush/spot cursors to disappear.

  • Spot removal tool doesn't work

    Hello
    I am a new user of Lightroom 5 and everything is going smoothly apart from what happened this morning.
    When under the Spot Removal Tool - you have the Clone and Heal mode options. They used to work perfectly up to yesterday and today when I click on either of them as I go to the picture to be developed - under Develop, it paints a white mark and when you fining it does nothing.
    It used to create a circle that you can move around to choose the texture and colour that suits you. Now this doesn't appear anymore. I must have pressed a button on the keyboard that caused this!
    I have tried resetting everything since this morning and nothing works...please let me know how to solve this.
    Much appreciated in advance...I will be providing more details if needed.
    Regards
    Anthony

    Sounds like more than one issue.
    To show the source area that you want the healing to come from again, try pressing "H" whilst the heal tool is selected.  You may have to press it more than once.
    If no healing is occurring it sounds like you may have the Opacity on the too,tunred right down.  Increase the Opacity slider to 100.....or to whatever setting you find works.

  • Spot Removal tool in L4 isn't working. Need Help!

    The spot removal tool on my lightroom 4 is, all of the sudden, not working. The tool opens as it always has and everything looks normal, but it won't heal or clone. It used to work fine, but as of just recent;y it doesn't. I've closed lightroom and have restarted my computer many times and still nothing. The rest of lightrrom works as it always has. Please advice, and many thanks!

    Don't feel too bad.  You aren't the only one who has gotten bit by that one lately.  Rikk has had the solution both times.

  • When using the spot removal tool, the sampled area is not showing.  I fully remember that I am seeing this before--I already had updates of my LR5

    When using the spot removal tool, the sampled area is not showing.  I fully remember that I am seeing this before--I already had updates of my LR5
    Is this just a setting?

    Thank you!  I feel so stupid -- I did search the internet--maybe not hard enough.

Maybe you are looking for

  • Status of line item of order (CRM)

    i am using the 'CRM_ORDER_MAINTAIN'  funtion module but it is working for updating the status of line item, my problem is that in our system order status is maintaing on the basis of item category Z used in Z order type is having the object type as S

  • Transport data types from PI 7.1 to 7.0

    Hi, I need to create in PI .70 a datatype that contains 30 datatypes, these datatypes are created in other machine PI 7.1, It's possible transport this objects from PI 7.1 to 7.0? How I can do it? Thanks in advance Jose Manuel

  • Compare folders and output files with same name?

    I'm trying to compare two folders and print only the excel files in folder B that have the same names as the pages files in folder A. I've tried using the completedigitalphotography "compare folders" action, but it will only output files that are of

  • Vertical centering in Spark/Flex

    I am horizontally dividing my panel between two elements. To acheive that I am using the following layout controls      <s:layout>                     <s:HorizontalLayout>              <s:paddingBottom>20</s:paddingBottom>                   <s:paddin

  • Iphone shuts down when speaking

    My iphone 3gs with system 4.2.1 shuts down by itself after some minutes while speaking. This did not happen with my previous system that followed the phone when I bought it? Can this be caused by any apps like "Viber" (that I newly have installed) or