Why will not except my bill details and let me perchase apps

I have a id I have filled in my billing detail and adress so why can I not perchase apps
And when I try to contact you over this why do you keep passing me onto a outside company

You are not addressing apple here. Although they provide the forums, all the help provided here is user-supported.
Before you can make purchases on your account, you must associate and verify an email address with Apple. Have you dont that?
Have you also used an accepted form of payment in your Billing Details?
Beyond that, no one here has access to your account. The only thing we can help with is to point you back to Apple - not to an outside company.  If all that checks out and you still have problems, contact iTunes Customer Service.

Similar Messages

  • Itunes will not take my billing info and it is a valid card

    itunes will not take my billing info and it is a valid card any idea on how to fix this?

    Contact iTunes customer support or the card issuer to resolve the matter.

  • TS1646 Itunes will not recognises my bank details and address details

    Itunes will not recognises my bank details and address details

    Make sure your bank info is the same on your iTunes account and with your bank and that your account is in good status. You can call your bank or iTunes support.
    https://expresslane.apple.com/GetproductgroupList.action

  • I was wondering why my account ask for billing details and won't let me download Anya

    I am trying to download an app I already playing but. Am unable please help fix this

    If you still have problem, contact iTune Support
    https://ssl.apple.com/emea/support/itunes/contact.html

  • My Mac will not start up like normal and I don't knwo why

    My iMac will not start up like normal and I don't know why. I tried to run Skype then nothing happend so I tried to restart my computer, but then it never loaded

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 9
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 10
    Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
    Step 11
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 12
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • My iPhoto has crashed and will not load up my picture and iTunes can not find my photos.  Why?

    My iPhoto has creashed and will not load up my pictures and iTunes can not find my picture either.  Why?

    Tell us more please - so it is hard to guess what might have happened.
    What is your iPhoto version and your MacOS X version?
    What happened directly, before you could no longer open your iPhoto library?
    Did you install or upgrade software?
    Did you import new photos to your iPhoto library?
    Are other programs also behaving buggie?
    Did you move your iPhoto library to a new harddisk?
    Did you run other programs, that might have changes the iPhoto library?
    How full is your harddrisk? Could it be, that you are running out of disk space?
    Anything at all, that could give us a clue ...
    -- Léonie

  • HT204053 What should I do when I changed my apple password and apps will not except it?

    What should I do when I changed my apple password and apps will not except it?

    Find out what apple id was used to purchase those apps and use that password.

  • HT4061 My daughter updated to the ios 7 and it asked for a passcode. The phone will not except the passcode and now her phone is disabled. Anyway to unlock without resetting?

    My daughter updated to the ios 7 and it asked for a passcode. The phone will not except the passcode and now her phone is disabled. Anyway to unlock without resetting?

    That's because the device has not been synced to that computer.  As per my earlier instructions... you will have to force it into recovery mode & restore as a new device.
    Recovery Mode... http://support.apple.com/kb/HT1808

  • I updated HP Printer Driver yesterday.  Although I can pring and scan, none of th ePrinter Utility fubctions work - it will not read my printer details, clean print heads etc

    I updated HP Printer Driver yesterday.  Although I can pring and scan, none of the Printer Utility fuctions work - it will not read my printer details, clean print heads etc

    This has happened with previous HP updates, so I suggest you go to HP's site to see if there are other complaints/responses.

  • I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

    I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

    What happens when the iPod is plugged in?  anything?  any errors?
    Why is 50GB of music gone?  All music should exist on the computer.  Only a fool would rely on a single device which could easily be lost or stolen to store their content on.

  • HT5577 Okay so I have 2 apple accounts. One is newer & one is my old one. The older one still has money from Itunes on it & when I go to log it will not except my password. Then it asked me my date of birth & it says its incorrect. What do I do?

    Okay so I have 2 apple accounts. One is newer & one is my old one. The older one still has money from Itunes on it & when I go to log it will not except my password. Then it asked me my date of birth & it says its incorrect.So I tried to go the email route but i never get anything in my email about recovering my password. What do I do?

    Hey donnieandjamie31,
    It sounds like you are not getting the email to reset your password.  If you have a rescue email setup for your Apple ID, the reset password email will be sent there and not your Apple ID email address:
    When you provide a rescue email address, all future security emails, such as password resets from iForgot, will be sent to the address provided.
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/HT5312
    You might want to check your other email accounts for the password reset email, including their Spam folders. If you continue to have issues, please contact our Account Security Team:
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • Special G/L transactions not defined for bills/exch.and down pmnts ERROR

    Dear Experts,
    I am trying to park document via F-63 - Invoice Parking - General  to park  down payments made to vendor using following details in initial screen for F-63:
    Posting Key_____29
    Account number _1000
    SGL Ind ________A
    after pressing enter key the system prompt error message that is:
    Special G/L transactions not defined for bills/exch.and down pmnts
    Message no. FP030
    Diagnosis
    You have selected a posting key with a special G/L indicator of type 'Bill of exchange', or 'Down payment'. Document parking is not defined for special G/L transactions of the type 'Bill of exchange' or 'Down payment'.
    System Response
    Document parking cannot be carried out.
    Procedure
    Select a different posting key or special G/L indicator. If the posting is a 'One-time posting' to a rent contract, select a different transaction type or post the document directly.
    HOW CAN I PARK DOWN PAYMENT DOCUMENT FOR VENDOR. KINDLY PROVIDE SUITABLE SOLUTION.
    REGARDS

    Dear,
    Your special G/L "A" is set as Down Payment/Down Payment request, this is what cause the error.
    To meet your requirement just go to FBKP select special G/L "A" enter your chart of accounts and go into properties, change
    Special G/L transaction types to Others from Payment/Down payment request.
    Advances can be created as Special G/L transaction types Others
    If parking is utmost required by you then according to me you should create two special G/L for Down Payment. New created should be used for parking and default by SAP you can use with functionality like F-47, F-48, F-54.
    System is stopping you because down payment functionality is provided exhaustively in SAP so you should follow that.
    Please analyze the process exhaustively and implement to smoothen your process.
    Regards,
    Chintan Joshi.

  • I am unable to purchase a book. It will not except any of my credit cards

    I am unable to purchase a book. It will not except any of my credit cards.

    this is under the apple id security section...it would not let me select not now so i have to use this set up security...i set up my questions and now i am at the end and its asking for the email....

  • HT2500 without changing settings, iMac mail V4.6, 1)will not save password 2)takes accounts offline 3)will not except password 4)will not send mail from accounts every time.     What happen?

    without changing settings, iMac mail V4.6,  1)will not save password   2)takes accounts offline  3)will not except password   4)will not send mail from accounts every time.
        What happen?  How do I correct this?

    Hi Nuch1,
    I found an article that is contains very thorough Mail troubleshooting steps:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    You can use that article to figure out what part of the email "ecosystem" is the cause of the issue, and it can also help you attempt to resolve it.
    Hope that helps,
    David

  • No matter what I do iTunes will not save my card details.

    Dear all,
    No matter what I do iTunes will not save my card details. Everytime I go to buy something it says "Your account information has changed" and takes me to the card details page. I update the card details correctly and click done and it takes me back to the store. I then go to buy something and it comes up with "Your account information has changed" and sends me back to the card details page with all the updated details I put in missing. This makes it completely impossible for me to use the iTunes store.
    Please help!
    Many thanks!
      Other OS  

    scootchy69 wrote:
    I have tried all that…I have tried multiple chargers and have not had any success! I think I have a lemon! Not too happy about all this either because I will probably have to pay for support since I have had the phone for more than 90 days
    While Apple may request a Pay-Per-Incident, if it is determined that your device has a hardware issue, that PPI will bewailed after troubleshooting is completed. Or, you can request that they waive that if you've already done a lot of troubleshooting.  The PPI is only for issues that a user could resolve on their own but want Apple to provide a walkthrough over the phone.  You can get free support by going to an Apple Store instead, for example, as well.

Maybe you are looking for

  • Searching for Duplicates records in Qualified Lookup tables

    Hi SDNers, I would like to know, How to find out how many records having duplicate records in Qualified Look Tables. In Free form search or Drill down Serach.. I am select the particular Qualified Look up Table. After how can I find Duplicated reocrd

  • ESS payslip error.

    Dear Expert, We are using EP 7 with java web dynpro. As for the malaysia and singapore payslip, we are able to view using the dynpro provide by the standard business package. However when it comes to the indonesia payslip, it is showing empty figure

  • In the dark with PSE7

    Hi.  I have been using the trial version of elements 7 and am considering buying it, as my version 4 has problems with vista.  My question is that when I open the PSE7 editor, the background and especially the toolbars are very dark, so that I need t

  • Forcing Epson driver to update to 3.5 (Universal Binary)

    I was having problems with an Epson Stylus Pro 7800. When printing from Photoshop CS3, all of the custom printer options such as "Print Settings" and "Paper Configuration" were unavailable (they were there, but crossed out with a strikethrough). If I

  • I/O error when trying create attachment on travel request & claim.

    Hi, Anyone here having a problem when using travel request & claim, then create attachment, there is an I/O Error dialog box appear? What cause of this error occurred? Thanks Hafiz