Why will not Tv shows come up on the menu?

When I turn on the Apple Tv, only 3 choices come up on the menu its movies, computers and options. Any suggestions on how I can get Tv show up on the menu?

Welcome to the Apple Community.
Are you using Ethernet.

Similar Messages

TS2551 I photo will not respond, it comes up but the cursor spins, and nothing else happens

Iphoto will not respond, it comes up the then the cursor spins, and then will not work.

Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance.

Lightroom will not launch and comes up with the following message "Lightroom encountered an error when reading from its preview cache and needs to quit". Lightroom will attempt to fix the problem next time it launches, except it doesn't fix and I now can

Can anyone help with the above problem?

Here is your fix: Lightroom says my preview cache is corrupted—how do I fix it? - The Lightroom Queen

Laserjet cm1415 will not stop showing "Incoming Call"

I have the fax setup in manual mode and it will not stop showing "Incoming call" on the panel even thjough there is no call comming in. Other than that everything works well. Any body have any ideas on how to get it off of that so the printer can go into sleep mode?
Thanks

The "Incoming Call" message is shown whenever we see a ring signal on the line, regardless of the fax receive mode.
If this message is showing up when no fax is being sent, then it means that there is noise on the phone line. You can contact your phone company to discuss options in reducing the noise on your phone line.
If this message is showing up with no phone line plugged in, then the modem inside the printer is detecting noise. It is possible that the internal fax parameters have become corrupt. If that is the case, then you can perform a "Restore Defaults" in order to reset them. Note: doing this will erase all of your settings. You can print out a configuration report before doing this so you can reset them. A restore can be done at the control panel by pressing [Setup] on the main screen (the button with the wrench on it), then select "Service" and then "Restore Defaults."
This is based on my own experience with the product.
I am an HP Employee.

HT1386 when i plug my iphone 4s into my computer is does not show in itunes, When the menu comes up on my computer for what action I want to take it shows no options for itunes. My phone worked before, Im not sure why it is not working now??

I just recently tried to plug my iphone 4s into intunes. It comes up with the menu of what action do you want to take. My only options only involve photos and videos nothing to do with syncing or music. When I open itunes it does not even show my device in itunes. What do I do??

uninstall itunes
you may have to manually delete anything related to itunes in regedit
reboot and reinstall itunes

I have a MacBook Pro and an 1TB WD my passport for mac. I bought a second hard drive to act as back up and when I went to do this the original passport won't mount. It is showing in disc utility but it will not repair. I am told the mac cannot repair it.

I have a MacBook Pro and an 1TB WD my passport for mac. I bought a second hard drive to act as back up and when I went to do this the original passport won't mount. It is showing in disc utility but it will not repair. I am told the mac cannot repair it and I need to back up the files and then restore the hard drive. But I can't open the hard drive to move the files onto the new one!
Help me please. I am not very technical so please answer as if I have no clue!! This hard drive has my iPhoto on it and all my pictures of my son, wedding and my current photography course so I desperate to get it back!
Any help will he appreciated!

disk0s2: I/O error.
disk0s2: I/O error.
The MBP's disk is damaged and requires replacement.
Genius Bar Reservations: http://www.apple.com/retail/geniusbar/

I purchased a Holux M-1200E Bluetooth GPS Data Logger. The device paired with my laptop just fine so I know it is working right. The device will not even show up on my iphone or ipad to pair via bluetooth. Is there a way to pair without jailbreaking???

I purchased a Holux M-1200E Bluetooth GPS Data Logger. The device paired with my laptop just fine so I know it is working right. The device will not even show up on my iphone or ipad to pair via bluetooth. Is there a way to pair without jailbreaking??? I haven't had any trouble to date pairing any devic with my iphone or ipad, this is ridiculous!!!! Is there a way to update my bluetooth settings on my iphone 4s to be able to have this device be recognized??? I love my apple devices, but this is very frustrating. I bought this Data Logger for a specific purpuse to help out with my Search and Rescue volunteer activities, and I really need help with this!!! I am hoping apple will help me!!!
Thanks,
Melissa

melissafromlenexa wrote:
That is not the right device, it is the
Holux
M-1200E Bluetooth GPS Logger
I looked at the same sight for that and it does not say that. This is the first time I have posted a question, you don't have to be mean about it. I am trying to get this to work for a good cause.
It may be the best source of assistance is the manufacturer of the device. I suspect you will need a specific app for the iPhone to get it to work, but the site is rather ambiguous about that.

Cancelled print but will not cancel and comes back on to print same job

cancelled print but will not cancel and comes back on to print same job on on hp deskjet all in one

Hi,
From the Control Panel, open Administrative Tools and select Sevices. Browse down to the print spooler service, right click it and select Properties then click on the Stop button. Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the job has been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I have just downloaded Lion and my AverTv Molar will not work, just comes up can not find device can anybody help please

Hi, I have just downloaded Lion, and my AverTV Volar M will not work, just come up can not find device can anybody help please.

Contact the manufacturer's tech support for help. Most likely it needs a compatible driver.

I am making my first keynote presentation. I transferred the slides from a power point. I did not use a 'theme' from keynote. Keynote will not let me 'name' the presentation and the 'save as' option will not come up in the menu. What have I done wrong

I am making my first keynote presentation. I transferred the slides from a power point. I did not use a 'theme' from keynote. Keynote will not let me 'name' the presentation and the 'save as' option will not come up in the menu. What have I done wrong

When it comes to Keynote, I try and start with a presentation that's 1680 x 1050 preset or something in that range. Most projectors that you'll get at a conference won't project much higher than that and if they run at a lower resolution, it's better to have the device downsize your Keynote. Anything is better than having the projector try and upsize your presentation... you work hard to make it look good, and it's mangled by some tired Epson projector.
As far as slides go, scan them in at 150 dpi or better, and make them at least the dimensions of your presentation. Keynote is really only wanting 72dpi, but I do them at 150, just in case I need to print out the presentation as a handout later, and having the pix at 150 dpi gives me a little help with their quality on a printer.
You'd probably have to drop in the 150 versions again if you output the Keynote to .pdf or Word or something, but at least you have the option.
And Gary's right (above) go ahead and scan them as TIFFs. Sooner or later you'll want to do something else with these slides (like make something for an iPad or the like) and having them as TIFFs keeps your presentation looking good.
Finally, and this is a big one, get to the location for your presentation ahead of time if you can, and plug the laptop in and see what you get. There's always connection problems. Don't let the AV bonehead tell you everything will work just fine ('... I don't have any adapters for a Mac...') . See it for yourself... you're the one that's standing up there. Unless it's your boss, then you better be really sure it works.

TS2811 After updating to ios 6 my phone had to be restored. Now it will not acitvate. I am receiving the message that ther server is unavailable. However, I can not use my phone at all until it is activated. why can I not activate?

After updating to ios 6 my phone had to be restored. Now it will not acitvate. I am receiving the message that ther server is unavailable. However, I can not use my phone at all until it is activated. why can I not activate?

Well, 99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
So, either get a sim card from the carrier your phone was originally locked to, or get it officially unlocked.

My iphone will not charge or come on... no damage, pristine condition, anyone had this issue?

my iphone will not charge or come on... no damage, pristine condition, anyone had this issue?

brandyames1 wrote:
my iphone will not charge or come on..
See Here for > Frozen or unresponsive iPhone
Try this First... No Data will be Lost..
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Why does not ipad show on itunes? when i connected with my macbook using usb, just it is charging electricity.

why does not ipad show on itunes? when i connected with my macbook using usb, just it is charging electricity.
i don't know why...

Sometimes it can be something very simple and easy to fix. Before you get into any involved troubleshooting, quit iTunes, restart your Mac, restart your iPad and then try to sync again.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If this doesn't work, then try the more involved stuff.

HT203425 the recent update for IPhoto (9.5.1) will not install on my Air. The error message comes back and says there is a problem with the App store. Please try later. This has gone on for several days. The update installed fine on my IMac.

I have tried installing from the App sotre updates and also the softwarre updates - I receive the same message.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

HT1414 Daughter's screen is black and will not reboot or come on

Daughter's screen went black and will not reboot what do we do

Restore the iOS without restoriing a backup
Use iTunes to restore your iOS device to factory settings
Note that if the phone was ever jailbroken, this may not work.

Why will not Tv shows come up on the menu?

Similar Messages

Maybe you are looking for