Why will PSE 12 no longer start after fresh installation?

After numerous attempts by Dell Support agent and by myself.  I cannot get PSE 12 to start at all.
I made the last install to a separate Elements folder, not to the Adobe folder.  The .exe file for the editor appears sufficiently large to be complete.  So far, I have found no way to make it start.
I learned that Elements receives no free telephone support.
The Adobe support phone number given me by Dell was disconnected.
Any tips would be appreciated.

Hi Barbara,
I gave the story a few days ago, but I don't know how to reconnect to
that thread.  After about 90 days of running on a new Dell Win 7 system,
PSE 12 reverted to the trial version.  I got Dell support to try to find
the problem.  After two days of work, uninstalling and reinstalling PSE
12, it quit working entirely. Dell says the problem is with the program,
not the computer.
With no one to talk to except this forum, I have been searching for
solutions.  I did normal reinstalls from both Dell and Adobe sites, all
to no avail.  Since all of the Adobe files are lumped in one folder, and
I seem to recall clicking on an upgrade screen near the time this
started, I decided to put PSE 12 in its own folder.
With any other .exe file, clicking on the file will normally launch the
program, even if the shortcut is not properly directed.  Nothing works
with PSE 12 as it is now installed.
Got any ideas?
Jim Nichols
Tullahoma, TN USA

Similar Messages

  • Some apps on my macbook pro will not open,,,they bouce a few times and disappear.  would someone please give me a straightforward answer on why this might be haappening(started after updates))   please?

    some apps on my macbook pro will not open,,,they bouce a few times and disappear.  would someone please give me a straightforward answer on why this might be haappening(started after updates))   please?

    Yay! Solved my own question; just did a hard shutdown, worked like a charm! Funny, didn't before. But who am I to question salvation?

  • OBIEE 11.1.1.5 presentation service not started  after fresh installtion

    hi all,
    we have installing OBIEE 11.1.1.5 64bit in AIX machine. after fresh installation all the services are up and running.
    once we restart the OPMN services, all the services are up except presentation service..
    System Environment:
    OS : AIX 7.1 TL03 64bit
    OBIEE : OBIEE11.1.1.5 64bit
    Installation type : Enterprise
    DB : 11gR2
    kindly guide us to find out the root cause..
    thanks in advance.

    hi ,
    thanks for quick reply...
    we have already done what u suggest and reinstall whole OBIEE include DB also ...but still we are facing this issue..
    any other ways to start presentation service....
    Edited by: 855349 on Jul 1, 2011 4:12 AM
    Edited by: 855349 on Jul 1, 2011 4:12 AM

  • Oracle 10g RMAN is not working in RHEL 4 after fresh installation

    I downloaded Oracle 10g R2 from OTN at home for self study.
    I have problem with the RMAN after fresh installation Oracle 10g in RedHat Enterprise Linux AS 4. (x86)
    Everything seems works fine, database mounted including EM, SQLPlus, iSQLPlus etc.
    But when I attempt to execute RMAN command on the terminal, nothing is happening. No RMAN prompt, No error message!
    I ran the "relink all" command but no helps.
    Please advice.
    Edited by: Surf888 on Nov 16, 2008 9:51 AM

    I guess you are a common Linux 'victim', you don't invoke Oracle's rman, but a Linux executable:
    http://linux.about.com/cs/linux101/g/rman.htm
    Check your PATH variable, you may move $ORACLE_HOME/bin to the top.
    Werner

  • Why will a stand alone executalbe with an installer work on windows 2000 and crashes on windows xp professional?

    When I run the setup.exe file on a Windows 2000 system it installs properly, but the same file run on a XP Professional system I get an error stating Fatal Error: Installation ended prematurely because of an error.
    See here for more information on the specific installer I'm trying to use.
    In fact I get this error for any stand alone executable I try to install on any XP machines. I am using LV 7.1. Is there a way to manually install eve
    rything?
    Thanks

    Sure you can Install a lv application manually. just copy the exe-file,
    support files in a folder. For the runtimeengine just copy the file
    lvrte.dll in the folder of your application or in the windows system folder.
    Hope that helps, Niko
    BB Herman wrote:
    > Why will a stand alone executalbe with an installer work on windows
    > 2000 and crashes on windows xp professional?
    >
    > When I run the setup.exe file on a Windows 2000 system it installs
    > properly, but the same file run on a XP Professional system I get an
    > error stating Fatal Error: Installation ended prematurely because of
    > an error.
    >
    > See
    > HREF="http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000...
    for more information on the specific installer I'm trying to
    > use.
    >
    > In fact I get this error for any stand alone executable I try to
    > install on any XP machines. I am using LV 7.1. Is there a way to
    > manually install everything?
    >
    > Thanks

  • MacBook pro no longer starts after a month of kernel panics. What to do?

    After about a month of kernel panics, my Mac crashed one more time and will no longer start. It sits at a black screen and just beeps, sometimes once, three times or more. I've been waiting for a friend to bring me an osx startup disk so I can fix it from the disk utility, but in the meantime I've been avoiding suspect programs as well as starting the computer holding command + s and typing /sbin/fcsk fy as many people have told me, and each time it said my hard drive was all right. My friend is coming back this week with the disk, but I am afraid it will be impossible even to boot from that. Does anyone have any suggestions? I don't have apple care or a warranty so going to the nearest apple store (one hour away) or the nearest servicer (a few minutes away) doesn't seem good. What should I do? I'm also slightly worried because I installed a firmware update not long before the panics started, to get around the region limitations of the DVD drive. I'm hoping this didn't cause any problems, since these panics seem to be related to RAM but the timing is just too convenient. Could this be a factor?

    Thanks again BDAqua, and sorry for the long delay between reponses. The computer's been out of sight and out of mind for me the past few weeks, but my wife reminded meabiut it this morning.
    So I tried the repair disk function within disk utility on the install disc, and everything seemed to be ok. I got a message in green that says "the volume Jeffs OW Mac appears to be ok." And then "Volume repair complete." I also noticed that the capicity of the drive appeared to be 119.69 GB and the available space 119.61 GB, which I guess meant the drive was completely empty but working.
    So I tried once again to restore from my time machine backup, and wonder of all wonders, it worked this time! Two hours of restoration later, I'm writing to you now from the restored computer, and my wife is thrilled (and thinks I'm a genius!). So thank you thank you thank you for taking the time to walk me through the steps! I really appreciate it!
    But now we're afraid to try again to upgrade to Snow Leopard. Do you think there's any reason trying again would throw the computer into another state of confusion, flux, and ultimately disaster, or should I just give it a shot? It's a 2009 Macbook Pro 2.2 GHz Intel Core 2 Duo, with 2GB 667 MHz DDR2 SDRAM, running OS X 10.5.8. Perhaps it just can't handle the new software?
    All the best, and thanks so much again!
    Jeff

  • Ohasd not starting after fresh install

    Hi,
    I have installed Oracle Database 11g Release 11.2.0.1.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options on SUSE Linux Enterprise Server 11 (x86_64) 11.0.
    After installation all cluster and resources were up, I could log in to database. I have restarted orcl1 node, and after boot the ohasd service is not started. Same is with orcl0 node. When I start manually, the cluster comes up. See below:
    grid@orcl1:~> crsctl check has
    CRS-4639: Could not contact Oracle High Availability Services
    orcl1:~ # ps aux | grep ohasd
    root      5157  0.0  0.0  11224  1448 ?        Ss   03:02   0:00 /bin/sh /etc/init.d/init.ohasd run
    root      5365  0.0  0.0   4316   756 pts/0    S+   03:02   0:00 grep ohasd
    orcl1:~ # chkconfig ohasd
    ohasd  on
    orcl1:~ # service ohasd start
    Starting ohasd:
    orcl1:~ #
    orcl1:~ # CRS-4123: Oracle High Availability Services has been started.
    orcl1:~ # ps aux | grep ohasd
    root      5157  0.0  0.0  11224  1464 ?        Ss   03:02   0:00 /bin/sh /etc/init.d/init.ohasd run
    root      5414  3.3  0.3 569056 47124 ?        Ssl  03:03   0:01 /u01/app/11.2.0/grid/bin/ohasd.bin reboot
    root      5736  0.0  0.0   4316   752 pts/0    S+   03:03   0:00 grep ohasdThen within short time everything is started up...
    Anyone has idea why ohasd service is not started automatically ?
    Update:
    I have changed /etc/init.d/ohasd file so that it 'logs' to /tmp time when invoked (see below the code). After reboot there is no record of startup /tmp/ohasd*
    orcl1:~ # chkconfig --list ohasd
    ohasd                     0:off  1:off  2:off  3:on   4:off  5:on   6:off
    # This script is invoked by the rc system.
    /bin/touch /tmp/ohasd.start."`date`"    # <<<--- added line to 'log' the start
    ORA_CRS_HOME=/u01/app/11.2.0/gridThanks !
    Edited by: kamilp on Feb 17, 2013 11:35 PM

    Hi,
    there are two scripts - both installed by installer, I have not changed anything...
    orcl1:~ # l /etc/init.d/*ohasd*
    -rwxr-xr-x 1 root root 3079 Feb 18 00:37 /etc/init.d/init.ohasd*
    -rwxr-xr-x 1 root root 2632 Feb 18 11:27 /etc/init.d/ohasd*
    orcl1:~ # l /etc/init.d/rc5.d/*ohasd*
    lrwxrwxrwx 1 root root 17 Feb 18 00:37 /etc/init.d/rc5.d/S96ohasd -> /etc/init.d/ohasd*
    orcl1:~ # head -10 /etc/init.d/ohasd
    #!/bin/sh
    # Copyright (c) 2001, 2009, Oracle and/or its affiliates. All rights reserved.
    # ohasd.sbs  - Control script for the Oracle HA Services daemon
    # This script is invoked by the rc system.
    ORA_CRS_HOME=/u01/app/11.2.0/grid
    orcl1:~ # head -10 /etc/init.d/init.ohasd
    #!/bin/sh
    # Copyright (c) 2001, 2009, Oracle and/or its affiliates. All rights reserved.
    # init.ohasd - Control script for the Oracle HA services daemon
    # This script is invoked by the init system

  • System Update 3.14 no longer starts after latest Vista (32) updates

    I can no longer get System Update to start after the latest set of Microsoft Security updates this week. I receive a message that Visual C++ Runtime has experienced an abnormal termination! I CAN get System update to run IF I update the application properties to run in XP SP2 Compatibility mode! Anyone else experience this?
    W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
    W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0

    Well, the problem is solved, and System Update is installed and working.
    The root cause of the problem appeared to be that the registry directory HKEY_LOCAL_MACHINE\SOFTWARE no longer extended "full control" permission to the Administrators user group on my machine. We fixed this by using regedit:
    Start... Run... regedit....
    select directory HKEY_LOCAL_MACHINE\SOFTWARE, right-click, Permissions...,
    press Add... button
    enter SYSNAME\Administrators in the text area (SYSNAME is a placeholder for my actual machine name)
    OK... OK...
    Quit regedit
    We diagnosed the problem with the help of IT support from our employer. The problem was blocking installation of new anti-virus software. We had just removed old anti-virus and "internet security" software. Hmm, I wonder if the old security software removed this permission setting as a parting gift.
    Hope this is helpful for others who encounter the same symptoms.

  • Touchsmart 600-1037d will not recognize Touchscree​n after fresh install Win 8 Pro 64-bit

    Would appreciate anyone's help in how to resolve my issue with my HP Touchsmart 600-1037d.  I have completed a fresh installation of Windows 8 Pro 64-bit, and the Touchscreen feature is not activated.  Unlike some of the other similarly related enquiries, I do not receive an error message in my Device Drivers that recognizes the Touchscreen and not have the correct drivers.  In my case, the OS simply does not recognize the Touchsreen features that were functional in Windows 7 64-bit.  I have tried using the NextWindow drivers from HP, Windows Update Catalog, and NextWindow websites, however none seem to work.  I have even tried a type of forced "installation" by right-clicking the relevant .inf files - with no success. 

    Dear frrw,
    Thank you for your reply and comments.  After reading through the pages from the link you provided, perhaps I am missing something.  I have successfully installed Windows 8 64-bit on my HP Touchsmart 600-1037d, which uses the nVidia GT230 adapter.  I have also successfully installed the latest nVidia Win8 drivers for the GT230.  All the features on the Touchsmart 600-1037d work fine - except there is no Touchscreen function.  In Device Manager there is no notification that there is a driver missing, ie Device Manager does not recognize that there is a Touchscreen device that I would need to update.  In Win7 64-bit the Touchscreen function worked fine.
    I have tried forcing the installation of the following drivers with no success, ie Win8 64-bit simply does not recognize that there is a Touchscreen device to install.
    - NextWindow drivers from HP
    - Windows Update Catalog drivers for the NextWindow 1950
    - NextWindow website
    Would appreciate any further advice.

  • ITunes does not start after Lion installation

    hi,
    after upgrading to the latest iTunes version and to Lion, I get "The file “iTunes Library.itl” cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?".
    Precise:
    I upgraded iTunes to the latest version (from the previous one, I am a regular upgrader) yesterday afternoon around 15:00, then I worked several hours on my iTunes library (including some new buys). At night I then installed Lions. After starting Lions, iTunes does not start anymore.
    I have read the threads about copying old library files from the "previous iTunes Libraries" folder. But if I do that, I will loose the entire afternoon work. Anyway it I cannot understand why iTunes now believes to be older after Lion installation than before...
    Can somebody please help?
    br
    a

    Hi,
    after backing up, I downloaded the latest version again and it really worked.
    Strange that evidently the Lion installation did revert yesterdays upgrade from iTunes. Now it works, including all my latest changes from yesterday.
    Case solved:)
    br
    a

  • U410 running really slow even after fresh installation

    I bought an ideapad u410 a little over an year ago. It came pre loaded with windows 8. It had been running slow for some time. The machine would almost take 10 mins to boot up. Any time i try to access something for the first time, it would take almost 10 mins for it to open, be it files, file explorer, web browser, media file or any installed app or program. Once it opened if i tried accessing a second time, it didnt take long. I installed the lenovo solution centre and did a hardware scan to see if there is an issue with the hard disk or RAM or any other hardware. The scan came out clean with all the hardware tests passed.
    I made a recovery disk and then reset the pc to get s fresh installation of the windows. I reset the system from PC settings. After getting a fresh installation when the problem persisted i reset the pc using the recovery disk. The recovery process took 30 hours to finish but that didnt solve the problem. When i tried to reset again it said that there is a partition error and partition could not be found. So i cleaned the hard drive using diskpart, made a primary partition and the. N formatted the HDD. When i tried to install windows 8 using recovery usb it says that it cant find active partition. So then i installed a copy of windows 7 which was very slow and took almost 3 hours to install. After installing windows 7 my laptop is still running very slow and it takes at least 5 minutes for me to access any file or to even right click and refresh the desktop.
    How do i resolve this issue and how can i get a clean installation of the pre loaded windows 8 which i am not able to install from the recovery disk. In the beginning there was one drive of 1TB on which i created more partition to get 1 drive of 450 GB and another 200 GB using the default windows disk manager. Could this have led to the issue of the Laptop slowing down?

    Kashb wrote:
    I bought an ideapad u410 a little over an year ago. It came pre loaded with windows 8. It had been running slow for some time. The machine would almost take 10 mins to boot up. Any time i try to access something for the first time, it would take almost 10 mins for it to open, be it files, file explorer, web browser, media file or any installed app or program. Once it opened if i tried accessing a second time, it didnt take long. I installed the lenovo solution centre and did a hardware scan to see if there is an issue with the hard disk or RAM or any other hardware. The scan came out clean with all the hardware tests passed.
    I made a recovery disk and then reset the pc to get s fresh installation of the windows. I reset the system from PC settings. After getting a fresh installation when the problem persisted i reset the pc using the recovery disk. The recovery process took 30 hours to finish but that didnt solve the problem. When i tried to reset again it said that there is a partition error and partition could not be found. So i cleaned the hard drive using diskpart, made a primary partition and the. N formatted the HDD. When i tried to install windows 8 using recovery usb it says that it cant find active partition. So then i installed a copy of windows 7 which was very slow and took almost 3 hours to install. After installing windows 7 my laptop is still running very slow and it takes at least 5 minutes for me to access any file or to even right click and refresh the desktop.
    How do i resolve this issue and how can i get a clean installation of the pre loaded windows 8 which i am not able to install from the recovery disk. In the beginning there was one drive of 1TB on which i created more partition to get 1 drive of 450 GB and another 200 GB using the default windows disk manager. Could this have led to the issue of the Laptop slowing down?
    You might want to check the ssd cache by following the command shown in the picture.

  • Root device cannot be found after fresh installation

    I just made a fresh installation on my lenovo y500. Everything went well. I rebooted (without the usb), and I get the error:
    "ERROR: device '/dev/sdc2' not found. Skipping fsck.
    Error: Unable to find root device '/dev/sdc2"
    I figured I must have goofed somewhere in the installation process, so I thought I'd just boot back into my live USB and start all over, but now the USB is not being detected whatsoever.
    When I open my BIOS, I can't change my boot priorities to USB because the option isn't even present anymore. It's as if the USB isn't recognized.
    When I try to boot into my (apparently broken) arch installation, I get dropped to a recovery shell after the error. Is there anything I can do in this?
    I don't want to make a whole other LiveUSB because the only machines I have left to make it are windows. And I'm windows retarded...
    I have already done the following:
    1. Ensured that secure boot is disabled
    2. Enabled USB Boot (However it doesn't show up in my bootable devices. Only see HDD Device and Linux Boot Manager. Both bring me to the same error)
    3. Moved my USB stick to different ports. Still not able to be detected as a bootable device
    4. Booted into recovery mode. It brings me to the same error.
    Would switching my boot mode to legacy help at all? I'd rather not even try because I just don't even see how it could help.root device not found arch post installatin
    This is not a dual installation. It's a clean installation because I didn't want any silly boot errors (just my luck, I guess).
    Gummiboot was my chosen bootloader during installation. I only had 2 partitions made a root partition 'sdc2' and the efi partition 'sdc1' which was formatted and created with the ef00 esp code
    No notable errors arose during installation and I unmounted everything before I rebooted. I am truly at my wit's end...

    lknows wrote:2. /dev/sdc was the planned installation location (if that's what you're asking) When I booted into the live usb, the usb was named sda, and the command [ fdisk -l ] didn't reveal any sdb location at all.
    No wonder your bootloader's not finding anything. /dev/sdc was the right installation point when you were running the LiveUSB, but it isn't the right mount point when actually booting from the machine.
    Find the bootloader settings of the actual installation (inside the /boot folder) and change the /dev/sdc to either /dev/sdb or /dev/sda and then try booting in again (I suggest /dev/sdb first).
    I use UUIDs with GRUB, and you can probably do something similar with gummboot. I do it so I avoid being unable to boot when my internal hard disk (I only have one) isn't recognised as /dev/sda.
    Last edited by clfarron4 (2014-10-11 21:50:23)

  • Database is not starting after RAC installation

    Hi All,
    I have installed 10g R2 2-node RAC on RHEL4 without any problem. But after the installation the database is not starting and i'm not able to connect. It is showing the below error..
    ERROR:
    ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux Error: 2: No such file or directory
    Can anybody help what might be the problem?
    Thanks,
    Praveen

    Hi,
    I'm giving the contents of alter log file from the first node...
    Mon Feb 19 16:45:59 2007
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
    Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
    Shared memory segment for instance monitoring created
    Picked latch-free SCN scheme 2
    Autotune of undo retention is turned on.
    IMODE=BR
    ILAT =36
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    ksdpec: called for event 13740 prior to event group initialization
    Starting up ORACLE RDBMS Version: 10.2.0.2.0.
    System parameters with non-default values:
    processes = 300
    sessions = 335
    sga_max_size = 1073741824
    sga_target = 1073741824
    db_block_size = 8192
    compatible = 10.2.0.2.0
    log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
    log_archive_format = %t_%s_%r.dbf
    db_file_multiblock_read_count= 16
    cluster_database_instances= 1
    db_create_file_dest = +ORCL_DATA1
    instance_number = 1
    undo_management = AUTO
    undo_tablespace = UNDOTBS1
    remote_login_passwordfile= EXCLUSIVE
    db_domain =
    dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
    remote_listener = LISTENERS_BSAPROD
    job_queue_processes = 10
    background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
    user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
    core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
    audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
    db_name = bsaprod
    open_cursors = 300
    pga_aggregate_target = 262144000
    Cluster communication is configured to use the following interface(s) for this instance
    10.250.90.107
    Mon Feb 19 16:46:00 2007
    cluster interconnect IPC version:Oracle UDP/IP (generic)
    IPC Vendor 1 proto 2
    PMON started with pid=2, OS id=31282
    DIAG started with pid=3, OS id=31284
    PSP0 started with pid=4, OS id=31286
    LMON started with pid=5, OS id=31300
    LMD0 started with pid=6, OS id=31315
    MMAN started with pid=7, OS id=31317
    DBW0 started with pid=8, OS id=31319
    LGWR started with pid=9, OS id=31321
    CKPT started with pid=10, OS id=31323
    SMON started with pid=11, OS id=31325
    RECO started with pid=12, OS id=31327
    CJQ0 started with pid=13, OS id=31329
    MMON started with pid=14, OS id=31331
    Mon Feb 19 16:46:00 2007
    starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
    MMNL started with pid=15, OS id=31333
    Mon Feb 19 16:46:00 2007
    starting up 1 shared server(s) ...
    Mon Feb 19 16:46:00 2007
    lmon registered with NM - instance id 1 (internal mem no 0)
    Mon Feb 19 16:46:01 2007
    Reconfiguration started (old inc 0, new inc 2)
    List of nodes:
    0
    Global Resource Directory frozen
    * allocate domain 0, invalid = TRUE
    Communication channels reestablished
    Master broadcasted resource hash value bitmaps
    Non-local Process blocks cleaned out
    Resources and enqueues cleaned out
    Resources remastered 0
    Set master node info
    Submitted all remote-enqueue requests
    Dwn-cvts replayed, VALBLKs dubious
    All grantable enqueues granted
    Post SMON to start 1st pass IR
    Submitted all GCS remote-cache requests
    Post SMON to start 1st pass IR
    Reconfiguration complete
    Mon Feb 19 16:46:01 2007
    CREATE DATABASE "bsaprod"
    MAXINSTANCES 32
    MAXLOGHISTORY 1
    MAXLOGFILES 192
    MAXLOGMEMBERS 3
    MAXDATAFILES 1024
    DATAFILE SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
    EXTENT MANAGEMENT LOCAL
    SYSAUX DATAFILE SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
    SMALLFILE DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
    SMALLFILE UNDO TABLESPACE "UNDOTBS1" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
    CHARACTER SET WE8ISO8859P1
    NATIONAL CHARACTER SET AL16UTF16
    LOGFILE GROUP 1 SIZE 51200K,
    GROUP 2 SIZE 51200K
    USER SYS IDENTIFIED BY *USER SYSTEM IDENTIFIED BY
    Mon Feb 19 16:46:01 2007
    Starting background process ASMB
    ASMB started with pid=19, OS id=31365
    Starting background process RBAL
    RBAL started with pid=20, OS id=31369
    Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
    Mon Feb 19 16:46:05 2007
    SUCCESS: diskgroup ORCL_DATA1 was mounted
    SUCCESS: diskgroup ORCL_DATA1 was dismounted
    Mon Feb 19 16:46:06 2007
    SUCCESS: diskgroup ORCL_DATA1 was mounted
    Mon Feb 19 16:46:06 2007
    Database mounted in Exclusive Mode
    Mon Feb 19 16:46:09 2007
    Successful mount of redo thread 1, with mount id 3309011657
    Assigning activation ID 3309011657 (0xc53b82c9)
    Thread 1 opened at log sequence 1
    Current log# 1 seq# 1 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Successful open of redo thread 1
    Mon Feb 19 16:46:09 2007
    MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
    Mon Feb 19 16:46:09 2007
    SMON: enabling cache recovery
    Mon Feb 19 16:46:09 2007
    create tablespace SYSTEM datafile SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
    EXTENT MANAGEMENT LOCAL online
    Mon Feb 19 16:46:20 2007
    Completed: create tablespace SYSTEM datafile SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
    EXTENT MANAGEMENT LOCAL online
    Mon Feb 19 16:46:20 2007
    create rollback segment SYSTEM tablespace SYSTEM
    storage (initial 50K next 50K)
    Completed: create rollback segment SYSTEM tablespace SYSTEM
    storage (initial 50K next 50K)
    Mon Feb 19 16:46:24 2007
    CREATE SMALLFILE UNDO TABLESPACE UNDOTBS1 DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
    Mon Feb 19 16:46:31 2007
    Successfully onlined Undo Tablespace 1.
    Completed: CREATE SMALLFILE UNDO TABLESPACE UNDOTBS1 DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
    Mon Feb 19 16:46:31 2007
    create tablespace SYSAUX datafile SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
    EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO online
    Completed: create tablespace SYSAUX datafile SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
    EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO online
    Mon Feb 19 16:46:36 2007
    CREATE SMALLFILE TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
    Completed: CREATE SMALLFILE TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
    Mon Feb 19 16:46:36 2007
    ALTER DATABASE DEFAULT TEMPORARY TABLESPACE TEMP
    Completed: ALTER DATABASE DEFAULT TEMPORARY TABLESPACE TEMP
    Mon Feb 19 16:46:36 2007
    ALTER DATABASE DEFAULT TABLESPACE SYSTEM
    Completed: ALTER DATABASE DEFAULT TABLESPACE SYSTEM
    Mon Feb 19 16:46:38 2007
    SMON: enabling tx recovery
    Mon Feb 19 16:46:39 2007
    Threshold validation cannot be done before catproc is loaded.
    Threshold validation cannot be done before catproc is loaded.
    replication_dependency_tracking turned off (no async multimaster replication found)
    Starting background process QMNC
    QMNC started with pid=22, OS id=32303
    Mon Feb 19 16:46:39 2007
    Completed: CREATE DATABASE "bsaprod"
    MAXINSTANCES 32
    MAXLOGHISTORY 1
    MAXLOGFILES 192
    MAXLOGMEMBERS 3
    MAXDATAFILES 1024
    DATAFILE SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
    EXTENT MANAGEMENT LOCAL
    SYSAUX DATAFILE SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
    SMALLFILE DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
    SMALLFILE UNDO TABLESPACE "UNDOTBS1" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
    CHARACTER SET WE8ISO8859P1
    NATIONAL CHARACTER SET AL16UTF16
    LOGFILE GROUP 1 SIZE 51200K,
    GROUP 2 SIZE 51200K
    USER SYS IDENTIFIED BY *USER SYSTEM IDENTIFIED BY
    Mon Feb 19 16:46:39 2007
    CREATE SMALLFILE UNDO TABLESPACE "UNDOTBS2" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
    Completed: CREATE SMALLFILE UNDO TABLESPACE "UNDOTBS2" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
    Mon Feb 19 16:46:46 2007
    CREATE SMALLFILE TABLESPACE "USERS" LOGGING DATAFILE SIZE 5M AUTOEXTEND ON NEXT 1280K MAXSIZE UNLIMITED EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO
    Completed: CREATE SMALLFILE TABLESPACE "USERS" LOGGING DATAFILE SIZE 5M AUTOEXTEND ON NEXT 1280K MAXSIZE UNLIMITED EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO
    Mon Feb 19 16:46:46 2007
    ALTER DATABASE DEFAULT TABLESPACE "USERS"
    Completed: ALTER DATABASE DEFAULT TABLESPACE "USERS"
    Mon Feb 19 16:47:05 2007
    Thread 1 advanced to log sequence 2
    Current log# 2 seq# 2 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Mon Feb 19 16:47:34 2007
    Thread 1 cannot allocate new log, sequence 3
    Checkpoint not complete
    Current log# 2 seq# 2 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Thread 1 advanced to log sequence 3
    Current log# 1 seq# 3 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Mon Feb 19 16:48:10 2007
    Thread 1 cannot allocate new log, sequence 4
    Checkpoint not complete
    Current log# 1 seq# 3 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Thread 1 advanced to log sequence 4
    Current log# 2 seq# 4 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Mon Feb 19 16:49:05 2007
    Thread 1 cannot allocate new log, sequence 5
    Checkpoint not complete
    Current log# 2 seq# 4 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Thread 1 advanced to log sequence 5
    Current log# 1 seq# 5 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Mon Feb 19 16:50:19 2007
    Thread 1 cannot allocate new log, sequence 6
    Checkpoint not complete
    Current log# 1 seq# 5 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Thread 1 advanced to log sequence 6
    Current log# 2 seq# 6 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Mon Feb 19 16:51:00 2007
    Thread 1 cannot allocate new log, sequence 7
    Checkpoint not complete
    Current log# 2 seq# 6 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Thread 1 advanced to log sequence 7
    Current log# 1 seq# 7 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Mon Feb 19 16:51:54 2007
    Thread 1 cannot allocate new log, sequence 8
    Checkpoint not complete
    Current log# 1 seq# 7 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Thread 1 advanced to log sequence 8
    Current log# 2 seq# 8 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Mon Feb 19 16:55:32 2007
    Thread 1 cannot allocate new log, sequence 9
    Checkpoint not complete
    Current log# 2 seq# 8 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Thread 1 advanced to log sequence 9
    Current log# 1 seq# 9 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Mon Feb 19 16:56:35 2007
    Thread 1 cannot allocate new log, sequence 10
    Checkpoint not complete
    Current log# 1 seq# 9 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Thread 1 advanced to log sequence 10
    Current log# 2 seq# 10 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Mon Feb 19 16:56:52 2007
    Thread 1 cannot allocate new log, sequence 11
    Checkpoint not complete
    Current log# 2 seq# 10 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Thread 1 advanced to log sequence 11
    Current log# 1 seq# 11 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Mon Feb 19 16:57:04 2007
    Thread 1 cannot allocate new log, sequence 12
    Checkpoint not complete
    Current log# 1 seq# 11 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Thread 1 advanced to log sequence 12
    Current log# 2 seq# 12 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Mon Feb 19 16:57:14 2007
    Thread 1 cannot allocate new log, sequence 13
    Checkpoint not complete
    Current log# 2 seq# 12 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Thread 1 advanced to log sequence 13
    Current log# 1 seq# 13 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Mon Feb 19 16:57:31 2007
    Thread 1 cannot allocate new log, sequence 14
    Checkpoint not complete
    Current log# 1 seq# 13 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Thread 1 advanced to log sequence 14
    Current log# 2 seq# 14 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Mon Feb 19 16:58:13 2007
    Thread 1 cannot allocate new log, sequence 15
    Checkpoint not complete
    Current log# 2 seq# 14 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Thread 1 advanced to log sequence 15
    Current log# 1 seq# 15 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Mon Feb 19 16:59:42 2007
    Thread 1 cannot allocate new log, sequence 16
    Checkpoint not complete
    Current log# 1 seq# 15 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Thread 1 advanced to log sequence 16
    Current log# 2 seq# 16 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Mon Feb 19 17:00:33 2007
    Thread 1 cannot allocate new log, sequence 17
    Checkpoint not complete
    Current log# 2 seq# 16 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Thread 1 advanced to log sequence 17
    Current log# 1 seq# 17 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Mon Feb 19 17:01:49 2007
    Thread 1 cannot allocate new log, sequence 18
    Checkpoint not complete
    Current log# 1 seq# 17 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Thread 1 advanced to log sequence 18
    Current log# 2 seq# 18 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Mon Feb 19 17:02:23 2007
    Thread 1 cannot allocate new log, sequence 19
    Checkpoint not complete
    Current log# 2 seq# 18 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Thread 1 advanced to log sequence 19
    Current log# 1 seq# 19 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Mon Feb 19 17:04:06 2007
    Thread 1 cannot allocate new log, sequence 20
    Checkpoint not complete
    Current log# 1 seq# 19 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Thread 1 advanced to log sequence 20
    Current log# 2 seq# 20 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Mon Feb 19 17:05:22 2007
    Thread 1 cannot allocate new log, sequence 21
    Checkpoint not complete
    Current log# 2 seq# 20 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Thread 1 advanced to log sequence 21
    Current log# 1 seq# 21 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Mon Feb 19 17:06:22 2007
    Thread 1 cannot allocate new log, sequence 22
    Checkpoint not complete
    Current log# 1 seq# 21 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Thread 1 advanced to log sequence 22
    Current log# 2 seq# 22 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Mon Feb 19 17:08:42 2007
    Thread 1 cannot allocate new log, sequence 23
    Checkpoint not complete
    Current log# 2 seq# 22 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Thread 1 advanced to log sequence 23
    Current log# 1 seq# 23 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Mon Feb 19 17:09:43 2007
    Thread 1 cannot allocate new log, sequence 24
    Checkpoint not complete
    Current log# 1 seq# 23 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Thread 1 advanced to log sequence 24
    Current log# 2 seq# 24 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Mon Feb 19 17:10:42 2007
    Thread 1 cannot allocate new log, sequence 25
    Checkpoint not complete
    Current log# 2 seq# 24 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Thread 1 advanced to log sequence 25
    Current log# 1 seq# 25 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Mon Feb 19 17:11:31 2007
    Thread 1 cannot allocate new log, sequence 26
    Checkpoint not complete
    Current log# 1 seq# 25 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Thread 1 advanced to log sequence 26
    Current log# 2 seq# 26 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Mon Feb 19 17:12:01 2007
    Thread 1 cannot allocate new log, sequence 27
    Checkpoint not complete
    Current log# 2 seq# 26 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Thread 1 advanced to log sequence 27
    Current log# 1 seq# 27 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Mon Feb 19 17:13:12 2007
    Thread 1 cannot allocate new log, sequence 28
    Checkpoint not complete
    Current log# 1 seq# 27 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Thread 1 advanced to log sequence 28
    Current log# 2 seq# 28 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Mon Feb 19 17:14:05 2007
    Thread 1 cannot allocate new log, sequence 29
    Checkpoint not complete
    Current log# 2 seq# 28 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Thread 1 advanced to log sequence 29
    Current log# 1 seq# 29 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Mon Feb 19 17:14:57 2007
    Thread 1 cannot allocate new log, sequence 30
    Checkpoint not complete
    Current log# 1 seq# 29 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Thread 1 advanced to log sequence 30
    Current log# 2 seq# 30 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Mon Feb 19 17:16:29 2007
    Thread 1 cannot allocate new log, sequence 31
    Checkpoint not complete
    Current log# 2 seq# 30 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
    Thread 1 advanced to log sequence 31
    Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Mon Feb 19 17:17:54 2007
    Starting background process EMN0
    EMN0 started with pid=25, OS id=15651
    Mon Feb 19 17:17:54 2007
    Shutting down instance: further logons disabled
    Mon Feb 19 17:17:55 2007
    Stopping background process QMNC
    Mon Feb 19 17:17:55 2007
    Stopping background process CJQ0
    Mon Feb 19 17:17:57 2007
    Stopping background process MMNL
    Mon Feb 19 17:17:58 2007
    Stopping background process MMON
    Mon Feb 19 17:17:59 2007
    Shutting down instance (immediate)
    License high water mark = 1
    Mon Feb 19 17:17:59 2007
    Stopping Job queue slave processes
    Mon Feb 19 17:17:59 2007
    Job queue slave processes stopped
    All dispatchers and shared servers shutdown
    Mon Feb 19 17:18:01 2007
    ALTER DATABASE CLOSE NORMAL
    Mon Feb 19 17:18:01 2007
    SMON: disabling tx recovery
    SMON: disabling cache recovery
    Mon Feb 19 17:18:03 2007
    Shutting down archive processes
    Archiving is disabled
    Archive process shutdown avoided: 0 active
    Thread 1 closed at log sequence 31
    Successful close of redo thread 1
    Mon Feb 19 17:18:04 2007
    Completed: ALTER DATABASE CLOSE NORMAL
    Mon Feb 19 17:18:04 2007
    ALTER DATABASE DISMOUNT
    Mon Feb 19 17:18:04 2007
    SUCCESS: diskgroup ORCL_DATA1 was dismounted
    Mon Feb 19 17:18:04 2007
    Completed: ALTER DATABASE DISMOUNT
    ARCH: Archival disabled due to shutdown: 1089
    Shutting down archive processes
    Archiving is disabled
    Archive process shutdown avoided: 0 active
    ARCH: Archival disabled due to shutdown: 1089
    Shutting down archive processes
    Archiving is disabled
    Archive process shutdown avoided: 0 active
    Mon Feb 19 17:18:09 2007
    freeing rdom 0
    Mon Feb 19 17:18:12 2007
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
    Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
    Picked latch-free SCN scheme 2
    Autotune of undo retention is turned on.
    IMODE=BR
    ILAT =36
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    ksdpec: called for event 13740 prior to event group initialization
    Starting up ORACLE RDBMS Version: 10.2.0.2.0.
    System parameters with non-default values:
    processes = 300
    sessions = 335
    sga_max_size = 1073741824
    sga_target = 1073741824
    control_files = +ORCL_DATA1/bsaprod/controlfile/current.256.614969167
    db_block_size = 8192
    compatible = 10.2.0.2.0
    log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
    log_archive_format = %t_%s_%r.dbf
    db_file_multiblock_read_count= 16
    cluster_database_instances= 1
    db_create_file_dest = +ORCL_DATA1
    instance_number = 1
    undo_management = AUTO
    undo_tablespace = UNDOTBS1
    remote_login_passwordfile= EXCLUSIVE
    db_domain =
    dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
    remote_listener = LISTENERS_BSAPROD
    job_queue_processes = 10
    background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
    user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
    core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
    audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
    db_name = bsaprod
    open_cursors = 300
    pga_aggregate_target = 262144000
    Cluster communication is configured to use the following interface(s) for this instance
    10.250.90.107
    Mon Feb 19 17:18:13 2007
    cluster interconnect IPC version:Oracle UDP/IP (generic)
    IPC Vendor 1 proto 2
    PMON started with pid=2, OS id=16124
    DIAG started with pid=3, OS id=16126
    PSP0 started with pid=4, OS id=16128
    LMON started with pid=5, OS id=16130
    LMD0 started with pid=6, OS id=16132
    MMAN started with pid=7, OS id=16134
    DBW0 started with pid=8, OS id=16136
    LGWR started with pid=9, OS id=16138
    CKPT started with pid=10, OS id=16140
    SMON started with pid=11, OS id=16142
    RECO started with pid=12, OS id=16144
    CJQ0 started with pid=13, OS id=16146
    MMON started with pid=14, OS id=16148
    Mon Feb 19 17:18:13 2007
    starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
    MMNL started with pid=15, OS id=16150
    Mon Feb 19 17:18:13 2007
    starting up 1 shared server(s) ...
    Mon Feb 19 17:18:13 2007
    lmon registered with NM - instance id 1 (internal mem no 0)
    Mon Feb 19 17:18:14 2007
    Reconfiguration started (old inc 0, new inc 2)
    List of nodes:
    0
    Global Resource Directory frozen
    * allocate domain 0, invalid = TRUE
    Communication channels reestablished
    Master broadcasted resource hash value bitmaps
    Non-local Process blocks cleaned out
    Resources and enqueues cleaned out
    Resources remastered 0
    Set master node info
    Submitted all remote-enqueue requests
    Dwn-cvts replayed, VALBLKs dubious
    All grantable enqueues granted
    Post SMON to start 1st pass IR
    Submitted all GCS remote-cache requests
    Post SMON to start 1st pass IR
    Reconfiguration complete
    Mon Feb 19 17:18:14 2007
    ALTER DATABASE MOUNT
    Mon Feb 19 17:18:14 2007
    Starting background process ASMB
    ASMB started with pid=19, OS id=16182
    Starting background process RBAL
    RBAL started with pid=20, OS id=16186
    Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
    Mon Feb 19 17:18:18 2007
    SUCCESS: diskgroup ORCL_DATA1 was mounted
    Mon Feb 19 17:18:23 2007
    Setting recovery target incarnation to 1
    Mon Feb 19 17:18:23 2007
    Successful mount of redo thread 1, with mount id 3309012054
    Mon Feb 19 17:18:23 2007
    Database mounted in Exclusive Mode
    Completed: ALTER DATABASE MOUNT
    Mon Feb 19 17:18:23 2007
    alter database archivelog
    Completed: alter database archivelog
    Mon Feb 19 17:18:23 2007
    alter database open
    Mon Feb 19 17:18:23 2007
    LGWR: STARTING ARCH PROCESSES
    ARC0 started with pid=22, OS id=16393
    Mon Feb 19 17:18:23 2007
    ARC0: Archival started
    ARC1: Archival started
    LGWR: STARTING ARCH PROCESSES COMPLETE
    ARC1 started with pid=23, OS id=16395
    Mon Feb 19 17:18:23 2007
    Thread 1 opened at log sequence 31
    Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Successful open of redo thread 1
    Mon Feb 19 17:18:23 2007
    MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
    Mon Feb 19 17:18:23 2007
    SMON: enabling cache recovery
    Mon Feb 19 17:18:23 2007
    ARC0: STARTING ARCH PROCESSES
    Mon Feb 19 17:18:23 2007
    ARC1: Becoming the 'no FAL' ARCH
    ARC1: Becoming the 'no SRL' ARCH
    Mon Feb 19 17:18:23 2007
    ARC2: Archival started
    ARC0: STARTING ARCH PROCESSES COMPLETE
    ARC0: Becoming the heartbeat ARCH
    ARC2 started with pid=24, OS id=16422
    Mon Feb 19 17:18:23 2007
    Successfully onlined Undo Tablespace 1.
    Mon Feb 19 17:18:23 2007
    SMON: enabling tx recovery
    Mon Feb 19 17:18:23 2007
    Database Characterset is WE8ISO8859P1
    replication_dependency_tracking turned off (no async multimaster replication found)
    Starting background process QMNC
    QMNC started with pid=25, OS id=16449
    Mon Feb 19 17:18:25 2007
    Completed: alter database open
    Mon Feb 19 17:18:25 2007
    ALTER DATABASE ADD LOGFILE THREAD 2 GROUP 3 SIZE 51200K,
    GROUP 4 SIZE 51200K
    Completed: ALTER DATABASE ADD LOGFILE THREAD 2 GROUP 3 SIZE 51200K,
    GROUP 4 SIZE 51200K
    Mon Feb 19 17:18:28 2007
    ALTER DATABASE ENABLE PUBLIC THREAD 2
    Completed: ALTER DATABASE ENABLE PUBLIC THREAD 2
    SUCCESS: diskgroup BSA_DATA1 was mounted
    SUCCESS: diskgroup BSA_DATA1 was dismounted
    Mon Feb 19 17:18:29 2007
    Starting background process EMN0
    EMN0 started with pid=26, OS id=16564
    Mon Feb 19 17:18:29 2007
    Shutting down instance: further logons disabled
    Mon Feb 19 17:18:29 2007
    Stopping background process QMNC
    Mon Feb 19 17:18:29 2007
    Stopping background process CJQ0
    Mon Feb 19 17:18:30 2007
    Stopping background process MMNL
    Mon Feb 19 17:18:31 2007
    Stopping background process MMON
    Mon Feb 19 17:18:32 2007
    Shutting down instance (immediate)
    License high water mark = 3
    Mon Feb 19 17:18:32 2007
    Stopping Job queue slave processes
    Mon Feb 19 17:18:32 2007
    Job queue slave processes stopped
    All dispatchers and shared servers shutdown
    Mon Feb 19 17:18:34 2007
    ALTER DATABASE CLOSE NORMAL
    Mon Feb 19 17:18:34 2007
    SMON: disabling tx recovery
    SMON: disabling cache recovery
    Mon Feb 19 17:18:34 2007
    Shutting down archive processes
    Archiving is disabled
    Mon Feb 19 17:18:39 2007
    ARCH shutting down
    ARC2: Archival stopped
    Mon Feb 19 17:18:44 2007
    ARCH shutting down
    ARC1: Archival stopped
    Mon Feb 19 17:18:49 2007
    ARCH shutting down
    ARC0: Archival stopped
    Mon Feb 19 17:18:50 2007
    Thread 1 closed at log sequence 31
    Successful close of redo thread 1
    Mon Feb 19 17:18:51 2007
    Completed: ALTER DATABASE CLOSE NORMAL
    Mon Feb 19 17:18:51 2007
    ALTER DATABASE DISMOUNT
    Mon Feb 19 17:18:51 2007
    SUCCESS: diskgroup ORCL_DATA1 was dismounted
    Mon Feb 19 17:18:51 2007
    Completed: ALTER DATABASE DISMOUNT
    ARCH: Archival disabled due to shutdown: 1089
    Shutting down archive processes
    Archiving is disabled
    Archive process shutdown avoided: 0 active
    ARCH: Archival disabled due to shutdown: 1089
    Shutting down archive processes
    Archiving is disabled
    Archive process shutdown avoided: 0 active
    Mon Feb 19 17:18:56 2007
    freeing rdom 0
    Mon Feb 19 17:18:59 2007
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
    Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
    Picked latch-free SCN scheme 2
    Autotune of undo retention is turned on.
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    ksdpec: called for event 13740 prior to event group initialization
    Starting up ORACLE RDBMS Version: 10.2.0.2.0.
    System parameters with non-default values:
    processes = 300
    sessions = 335
    sga_max_size = 1073741824
    spfile = +BSA_DATA1/bsaprod/spfilebsaprod.ora
    sga_target = 1073741824
    control_files = +ORCL_DATA1/bsaprod/controlfile/current.256.614969167
    db_block_size = 8192
    compatible = 10.2.0.2.0
    log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
    log_archive_format = %t_%s_%r.dbf
    db_file_multiblock_read_count= 16
    cluster_database = TRUE
    cluster_database_instances= 2
    db_create_file_dest = +ORCL_DATA1
    thread = 1
    instance_number = 1
    undo_management = AUTO
    undo_tablespace = UNDOTBS1
    remote_login_passwordfile= EXCLUSIVE
    db_domain =
    dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
    remote_listener = LISTENERS_BSAPROD
    job_queue_processes = 10
    background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
    user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
    core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
    audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
    db_name = bsaprod
    open_cursors = 300
    pga_aggregate_target = 262144000
    Cluster communication is configured to use the following interface(s) for this instance
    10.250.90.107
    Mon Feb 19 17:19:00 2007
    cluster interconnect IPC version:Oracle UDP/IP (generic)
    IPC Vendor 1 proto 2
    PMON started with pid=2, OS id=17373
    DIAG started with pid=3, OS id=17375
    PSP0 started with pid=4, OS id=17377
    LMON started with pid=5, OS id=17379
    LMD0 started with pid=6, OS id=17381
    LMS0 started with pid=7, OS id=17383
    LMS1 started with pid=8, OS id=17387
    MMAN started with pid=9, OS id=17391
    DBW0 started with pid=10, OS id=17393
    LGWR started with pid=11, OS id=17395
    CKPT started with pid=12, OS id=17397
    SMON started with pid=13, OS id=17399
    RECO started with pid=14, OS id=17412
    CJQ0 started with pid=15, OS id=17428
    MMON started with pid=16, OS id=17430
    Mon Feb 19 17:19:00 2007
    starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
    MMNL started with pid=17, OS id=17432
    Mon Feb 19 17:19:00 2007
    starting up 1 shared server(s) ...
    Mon Feb 19 17:19:01 2007
    lmon registered with NM - instance id 1 (internal mem no 0)
    Mon Feb 19 17:19:01 2007
    Reconfiguration started (old inc 0, new inc 2)
    List of nodes:
    0
    Global Resource Directory frozen
    * allocate domain 0, invalid = TRUE
    Communication channels reestablished
    Master broadcasted resource hash value bitmaps
    Non-local Process blocks cleaned out
    Mon Feb 19 17:19:01 2007
    LMS 1: 0 GCS shadows cancelled, 0 closed
    Mon Feb 19 17:19:01 2007
    LMS 0: 0 GCS shadows cancelled, 0 closed
    Set master node info
    Submitted all remote-enqueue requests
    Dwn-cvts replayed, VALBLKs dubious
    All grantable enqueues granted
    Post SMON to start 1st pass IR
    Mon Feb 19 17:19:01 2007
    LMS 1: 0 GCS shadows traversed, 0 replayed
    Mon Feb 19 17:19:01 2007
    LMS 0: 0 GCS shadows traversed, 0 replayed
    Mon Feb 19 17:19:01 2007
    Submitted all GCS remote-cache requests
    Post SMON to start 1st pass IR
    Fix write in gcs resources
    Reconfiguration complete
    LCK0 started with pid=20, OS id=17460
    Mon Feb 19 17:19:02 2007
    ALTER DATABASE MOUNT
    Mon Feb 19 17:19:02 2007
    This instance was first to mount
    Mon Feb 19 17:19:02 2007
    Starting background process ASMB
    ASMB started with pid=22, OS id=17466
    Starting background process RBAL
    RBAL started with pid=23, OS id=17470
    Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
    Mon Feb 19 17:19:06 2007
    SUCCESS: diskgroup ORCL_DATA1 was mounted
    Mon Feb 19 17:19:09 2007
    SUCCESS: diskgroup BSA_DATA1 was mounted
    SUCCESS: diskgroup BSA_DATA1 was dismounted
    SUCCESS: diskgroup BSA_DATA1 was mounted
    SUCCESS: diskgroup BSA_DATA1 was dismounted
    Mon Feb 19 17:19:10 2007
    Setting recovery target incarnation to 1
    Mon Feb 19 17:19:10 2007
    Successful mount of redo thread 1, with mount id 3308997510
    Mon Feb 19 17:19:10 2007
    Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
    Completed: ALTER DATABASE MOUNT
    Mon Feb 19 17:19:11 2007
    ALTER DATABASE OPEN
    This instance was first to open
    Picked broadcast on commit scheme to generate SCNs
    Mon Feb 19 17:19:11 2007
    LGWR: STARTING ARCH PROCESSES
    ARC0 started with pid=26, OS id=17679
    Mon Feb 19 17:19:11 2007
    ARC0: Archival started
    ARC1: Archival started
    LGWR: STARTING ARCH PROCESSES COMPLETE
    ARC1 started with pid=27, OS id=17706
    Mon Feb 19 17:19:11 2007
    Thread 1 opened at log sequence 31
    Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Successful open of redo thread 1
    Mon Feb 19 17:19:11 2007
    MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
    Mon Feb 19 17:19:11 2007
    ARC0: STARTING ARCH PROCESSES
    Mon Feb 19 17:19:11 2007
    ARC1: Becoming the 'no FAL' ARCH
    ARC1: Becoming the 'no SRL' ARCH
    Mon Feb 19 17:19:11 2007
    SMON: enabling cache recovery
    Mon Feb 19 17:19:11 2007
    ARC2: Archival started
    ARC0: STARTING ARCH PROCESSES COMPLETE
    ARC0: Becoming the heartbeat ARCH
    ARC2 started with pid=28, OS id=17708
    Mon Feb 19 17:19:11 2007
    Successfully onlined Undo Tablespace 1.
    Mon Feb 19 17:19:11 2007
    SMON: enabling tx recovery
    Mon Feb 19 17:19:11 2007
    Database Characterset is WE8ISO8859P1
    Mon Feb 19 17:19:11 2007
    Instance recovery: looking for dead threads
    Instance recovery: lock domain invalid but no dead threads
    Mon Feb 19 17:19:12 2007
    SUCCESS: diskgroup BSA_DATA1 was mounted
    SUCCESS: diskgroup BSA_DATA1 was dismounted
    SUCCESS: diskgroup BSA_DATA1 was mounted
    SUCCESS: diskgroup BSA_DATA1 was dismounted
    SUCCESS: diskgroup BSA_DATA1 was mounted
    SUCCESS: diskgroup BSA_DATA1 was dismounted
    SUCCESS: diskgroup BSA_DATA1 was mounted
    SUCCESS: diskgroup BSA_DATA1 was dismounted
    SUCCESS: diskgroup BSA_DATA1 was mounted
    SUCCESS: diskgroup BSA_DATA1 was dismounted
    Mon Feb 19 17:19:12 2007
    replication_dependency_tracking turned off (no async multimaster replication found)
    Starting background process QMNC
    QMNC started with pid=29, OS id=17735
    Mon Feb 19 17:19:13 2007
    Completed: ALTER DATABASE OPEN
    Mon Feb 19 17:20:11 2007
    Shutting down archive processes
    Mon Feb 19 17:20:16 2007
    ARCH shutting down
    ARC2: Archival stopped
    Mon Feb 19 17:23:35 2007
    Starting background process EMN0
    EMN0 started with pid=74, OS id=28350
    Mon Feb 19 17:23:35 2007
    Shutting down instance: further logons disabled
    Mon Feb 19 17:23:36 2007
    Stopping background process QMNC
    Mon Feb 19 17:23:36 2007
    Stopping background process CJQ0
    Mon Feb 19 17:23:38 2007
    Stopping background process MMNL
    Mon Feb 19 17:23:39 2007
    Stopping background process MMON
    Mon Feb 19 17:23:40 2007
    Shutting down instance (immediate)
    License high water mark = 34
    Mon Feb 19 17:23:40 2007
    Stopping Job queue slave processes
    Mon Feb 19 17:23:40 2007
    Job queue slave processes stopped
    All dispatchers and shared servers shutdown
    Mon Feb 19 17:24:07 2007
    ALTER DATABASE CLOSE NORMAL
    Mon Feb 19 17:24:07 2007
    SMON: disabling tx recovery
    SMON: disabling cache recovery
    Mon Feb 19 17:24:08 2007
    Shutting down archive processes
    Archiving is disabled
    Mon Feb 19 17:24:18 2007
    ARC1: Becoming the 'no FAL' ARCH
    ARC1: Becoming the 'no SRL' ARCH
    ARC1: Archiving disabled
    ARCH shutting down
    Mon Feb 19 17:24:18 2007
    ARC1: Archival stopped
    Mon Feb 19 17:24:18 2007
    ARC0: Becoming the heartbeat ARCH
    Mon Feb 19 17:24:18 2007
    ARC0: Archiving disabled
    ARCH shutting down
    ARC0: Archival stopped
    Mon Feb 19 17:24:19 2007
    Thread 1 closed at log sequence 31
    Successful close of redo thread 1
    Mon Feb 19 17:24:19 2007
    Completed: ALTER DATABASE CLOSE NORMAL
    Mon Feb 19 17:24:19 2007
    ALTER DATABASE DISMOUNT
    Mon Feb 19 17:24:19 2007
    SUCCESS: diskgroup ORCL_DATA1 was dismounted
    Mon Feb 19 17:24:19 2007
    Completed: ALTER DATABASE DISMOUNT
    ARCH: Archival disabled due to shutdown: 1089
    Shutting down archive processes
    Archiving is disabled
    Archive process shutdown avoided: 0 active
    ARCH: Archival disabled due to shutdown: 1089
    Shutting down archive processes
    Archiving is disabled
    Archive process shutdown avoided: 0 active
    Mon Feb 19 17:24:25 2007
    freeing rdom 0
    Mon Feb 19 17:24:35 2007
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
    Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
    Picked latch-free SCN scheme 2
    Autotune of undo retention is turned on.
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    ksdpec: called for event 13740 prior to event group initialization
    Starting up ORACLE RDBMS Version: 10.2.0.2.0.
    System parameters with non-default values:
    processes = 300
    sessions = 335
    sga_max_size = 1073741824
    __shared_pool_size = 255852544
    __large_pool_size = 4194304
    __java_pool_size = 4194304
    __streams_pool_size = 0
    spfile = +BSA_DATA1/bsaprod/spfilebsaprod.ora
    sga_target = 1073741824
    control_files = +ORCL_DATA1/bsaprod/controlfile/current.256.614969167
    db_block_size = 8192
    __db_cache_size = 801112064
    compatible = 10.2.0.2.0
    log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
    log_archive_format = %t_%s_%r.dbf
    db_file_multiblock_read_count= 16
    cluster_database = TRUE
    cluster_database_instances= 2
    db_create_file_dest = +ORCL_DATA1
    thread = 1
    instance_number = 1
    undo_management = AUTO
    undo_tablespace = UNDOTBS1
    remote_login_passwordfile= EXCLUSIVE
    db_domain =
    dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
    remote_listener = LISTENERS_BSAPROD
    job_queue_processes = 10
    background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
    user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
    core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
    audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
    db_name = bsaprod
    open_cursors = 300
    pga_aggregate_target = 262144000
    Cluster communication is configured to use the following interface(s) for this instance
    10.250.90.107
    Mon Feb 19 17:24:35 2007
    cluster interconnect IPC version:Oracle UDP/IP (generic)
    IPC Vendor 1 proto 2
    PMON started with pid=2, OS id=29950
    DIAG started with pid=3, OS id=29952
    PSP0 started with pid=4, OS id=29954
    LMON started with pid=5, OS id=29956
    LMD0 started with pid=6, OS id=29958
    LMS0 started with pid=7, OS id=29960
    LMS1 started with pid=8, OS id=29964
    MMAN started with pid=9, OS id=29968
    DBW0 started with pid=10, OS id=29970
    LGWR started with pid=11, OS id=29972
    CKPT started with pid=12, OS id=29974
    SMON started with pid=13, OS id=29976
    RECO started with pid=14, OS id=29978
    CJQ0 started with pid=15, OS id=29980
    MMON started with pid=16, OS id=29982
    Mon Feb 19 17:24:36 2007
    starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
    MMNL started with pid=17, OS id=29984
    Mon Feb 19 17:24:36 2007
    starting up 1 shared server(s) ...
    Mon Feb 19 17:24:36 2007
    lmon registered with NM - instance id 1 (internal mem no 0)
    Mon Feb 19 17:24:39 2007
    Reconfiguration started (old inc 0, new inc 4)
    List of nodes:
    0 1
    Global Resource Directory frozen
    * allocate domain 0, invalid = TRUE
    Communication channels reestablished
    * domain 0 not valid according to instance 1
    * domain 0 valid = 0 according to instance 1
    Mon Feb 19 17:24:39 2007
    Master broadcasted resource hash value bitmaps
    Non-local Process blocks cleaned out
    Mon Feb 19 17:24:39 2007
    LMS 1: 0 GCS shadows cancelled, 0 closed
    Mon Feb 19 17:24:39 2007
    LMS 0: 0 GCS shadows cancelled, 0 closed
    Set master node info
    Submitted all remote-enqueue requests
    Dwn-cvts replayed, VALBLKs dubious
    All grantable enqueues granted
    Mon Feb 19 17:24:39 2007
    LMS 0: 0 GCS shadows traversed, 0 replayed
    Mon Feb 19 17:24:39 2007
    LMS 1: 0 GCS shadows traversed, 0 replayed
    Mon Feb 19 17:24:39 2007
    Submitted all GCS remote-cache requests
    Post SMON to start 1st pass IR
    Fix write in gcs resources
    Reconfiguration complete
    LCK0 started with pid=20, OS id=30069
    Mon Feb 19 17:24:40 2007
    ALTER DATABASE MOUNT
    Mon Feb 19 17:24:41 2007
    Starting background process ASMB
    ASMB started with pid=22, OS id=30121
    Starting background process RBAL
    RBAL started with pid=23, OS id=30125
    Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
    Mon Feb 19 17:24:45 2007
    SUCCESS: diskgroup ORCL_DATA1 was mounted
    Mon Feb 19 17:24:49 2007
    Setting recovery target incarnation to 1
    Mon Feb 19 17:24:49 2007
    Successful mount of redo thread 1, with mount id 3309017062
    Mon Feb 19 17:24:49 2007
    Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
    Mon Feb 19 17:24:51 2007
    SUCCESS: diskgroup BSA_DATA1 was mounted
    SUCCESS: diskgroup BSA_DATA1 was dismounted
    SUCCESS: diskgroup BSA_DATA1 was mounted
    SUCCESS: diskgroup BSA_DATA1 was dismounted
    SUCCESS: diskgroup BSA_DATA1 was mounted
    SUCCESS: diskgroup BSA_DATA1 was dismounted
    SUCCESS: diskgroup BSA_DATA1 was mounted
    SUCCESS: diskgroup BSA_DATA1 was dismounted
    SUCCESS: diskgroup BSA_DATA1 was mounted
    SUCCESS: diskgroup BSA_DATA1 was dismounted
    Mon Feb 19 17:24:52 2007
    Completed: ALTER DATABASE MOUNT
    Mon Feb 19 17:24:52 2007
    ALTER DATABASE OPEN
    Picked broadcast on commit scheme to generate SCNs
    Mon Feb 19 17:24:52 2007
    LGWR: STARTING ARCH PROCESSES
    ARC0 started with pid=25, OS id=30406
    Mon Feb 19 17:24:53 2007
    ARC0: Archival started
    ARC1: Archival started
    LGWR: STARTING ARCH PROCESSES COMPLETE
    ARC1 started with pid=26, OS id=30422
    Mon Feb 19 17:24:53 2007
    Thread 1 opened at log sequence 31
    Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
    Successful open of redo thread 1
    Mon Feb 19 17:24:53 2007
    MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
    Mon Feb 19 17:24:53 2007
    ARC0: STARTING ARCH PROCESSES
    Mon Feb 19 17:24:53 2007
    ARC1: Becoming the 'no FAL' ARCH
    ARC1: Becoming the 'no SRL' ARCH
    Mon Feb 19 17:24:53 2007
    SMON: enabling cache recovery
    Mon Feb 19 17:24:53 2007
    ARC2: Archival started
    ARC0: STARTING ARCH PROCESSES COMPLETE
    ARC0: Becoming the heartbeat ARCH
    ARC2 started with pid=27, OS id=30436
    Mon Feb 19 17:25:07 2007
    Successfully onlined Undo Tablespace 1.
    Mon Feb 19 17:25:07 2007
    SMON: enabling tx recovery
    Mon Feb 19 17:25:07 2007
    Database Characterset is WE8ISO8859P1
    replication_dependency_tracking turned off (no async multimaster replication found)
    Starting background process QMNC
    QMNC started with pid=29, OS id=30882
    Mon Feb 19 17:26:31 2007
    Completed: ALTER DATABASE OPEN
    Mon Feb 19 17:26:38 2007
    ALTER SYSTEM SET service_names='bsaprod','bsatest' SCOPE=MEMORY SID='bsaprod1';
    Mon Feb 19 17:26:53 2007
    Shutting down archive processes
    Mon Feb 19 17:26:58 2007
    ARCH shutting down
    ARC2: Archival stopped
    Mon Feb 19 17:32:16 2007
    Error: KGXGN aborts the instance (6)
    Mon Feb 19 17:32:16 2007
    Errors in file /u01/app/oracle/oracle/admin/bsaprod/bdump/bsaprod1_lmon_29956.trc:
    ORA-29702: error occurred in Cluster Group Service operation
    LMON: terminating instance due to error 29702
    Mon Feb 19 17:32:17 2007
    System state dump is made for local instance
    System State dumped to trace file /u01/app/oracle/oracle/admin/bsaprod/bdump/bsaprod1_diag_29952.trc
    Mon Feb 19 17:32:18 2007
    Trace dumping is performing id=[cdmp_20070219173217]
    Mon Feb 19 17:32:21 2007
    Instance terminated by LMON, pid = 29956
    and also the output of crs_stat -t in first node is....
    Name Type Target State Host
    ora....d1.inst application ONLINE OFFLINE
    ora....d2.inst application ONLINE OFFLINE
    ora....od1.srv application ONLINE OFFLINE
    ora....od2.srv application ONLINE OFFLINE
    ora....test.cs application ONLINE OFFLINE
    ora.bsaprod.db application ONLINE OFFLINE
    ora....SM1.asm application ONLINE UNKNOWN dsrvbd003
    ora....ER.lsnr application ONLINE UNKNOWN dsrvbd003
    ora....03.lsnr application ONLINE UNKNOWN dsrvbd003
    ora....003.gsd application ONLINE UNKNOWN dsrvbd003
    ora....003.ons application ONLINE UNKNOWN dsrvbd003
    ora....003.vip application ONLINE ONLINE dsrvbd003
    ora....SM2.asm application ONLINE OFFLINE
    ora....04.lsnr application ONLINE OFFLINE
    ora....004.gsd application ONLINE OFFLINE
    ora....004.ons application ONLINE OFFLINE
    ora....004.vip application ONLINE OFFLINE

  • OIF installation - OHS doesn't start after Webgate installation

    Hi,
    We are using Solaris 10 sparc server where we have installed Oracle Http Server(OHS) instance and Oracle Identity Federation(OIF).
    We have also installed Oracle access server on different host and we have created Webgate profile for OHS from Access System Console and assoaciate that webgate with Access Server.
    Then we have installed OHS webgate Oracle_Access_Manager10_1_4_3_0_sparc-s2_OHS2_WebGate on the server where OHS is installed, now when we try to restart OHS instance after successful installation of webgate we are getting the following error:
    opmnctl startproc: starting opmn managed processes...
    ================================================================================
    opmn id=dm01-app1-zone03:6701
    1 of 2 processes started.
    ias-instance id=asinst_1
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    ohsoam/OHS/OHS/
    Error
    --> Process (index=1,uid=1447172267,pid=14240)
    failed to start a managed process after the maximum retry limit
    Log:
    /app01/Oracle/asinst_1/diagnostics/logs/OHS/ohsoam/console~OHS~1.log
    Note: We are using the following gcc libraries which are required for the installation of OHS webgate:
    libgcc_s.so.1
    libstdc++.so.5
    In the OHS logs we have found an error stating like:
    httpd.worker: Syntax error on line 1040 of /app01/Oracle/asinst_1/config/OHS/ohsoam/httpd.conf: Cannot load /app01/netpoint/webgate/access/oblix/lib/libgcc_s.so.1 into server: ld.so.1: httpd.worker: fatal: /app01/netpoint/webgate/access/oblix/lib/libgcc_s.so.1: wrong ELF class: ELFCLASS32
    So can anyone please help us out in finding what is causing this issue. Are we missing something or using wrong libraries?

    Thanks for your response!
    We also tried with 64 bit webgate /Oracle_Access_Manager10_1_4_3_0_sparc-s2_64_OHS11g_WebGate/ but we are still getting the following error during the webgate installation itself:
    /Configuring WebGate...
    There is an error. Please try again.
    ld.so.1: configureWebGate: fatal:
    /app01/netpoint/webgate/access/oblix/tools/configureWebGate/../../../oblix/lib/libstdc++.so.5:
    wrong ELF class: ELFCLASS32
    Killed
    WebGate configuration was unsuccessful. You can run the configuration program
    again or manually run
    /app01/netpoint/webgate/access/oblix/tools/configureWebGate/start_configureWebG
    ate
    Would you like to run it again?
    [X] 1 - Yes
    [ ] 2 - No/
    So please let us know are we using the correct libraries and webgate for OHS.
    If not then please suggest the link from where we can download the correct one.
    Following are our OS details:
    # isalist
    sparcv9+vis2 sparcv9+vis sparcv9 sparcv8plus+vis2 sparcv8plus+vis sparcv8plus sparcv8 sparcv8-fsmuld sparcv7 sparc
    # isainfo -kv
    64-bit sparcv9 kernel modules
    # isainfo -v
    64-bit sparcv9 applications
    vis2 vis
    32-bit sparc applications
    vis2 vis v8plus div32 mul32
    # uname -a
    SunOS dm01-app1-zone03 5.10 Generic_142900-02 sun4u sparc SUNW,Sun-Fire-V440

  • [SOLVED] Several problems after fresh installation

    Hi guys,
    i just did a fresh installation of arch and every times i must do something i get this error:
    cannot remove, read, edit and etc : read-only file system
    So i searched for a workaround.. but i must do this after every boot
    This is it:
    mount -oremount,rw /
    There's a way to fix this forever?
    Often when i need to edit some files, like /etc/pacman.conf or xorg config file, arch tell me: You do not have write permission to modify... that file
    Searched another workaround.. and also this i must do every time after each boot:
    sudo chown -R black /directory of file that i'm trying to edit/
    I hope to fix this annoying problems, with your help.
    Thanks guys,
    Gabriele.
    Last edited by Lilith (2012-09-28 13:18:46)

    Ok guys,
    think solved by change my /sda6/ (root) by /mnt to / and adding a slash / before home, boot, var.
    Rebooted and try to edit the same file /etc/fstab and no warnings
    Now is like this:
    # /etc/fstab: static file system information
    # <file system> <dir>     <type>     <options>                <dump>    <pass>
    tmpfs                    /tmp        tmps        nodev,nosuid             0                0
    #UUID=blablablabla
    /dev/sda6                  /             ext4                  rw,relatime           0   1
    #UUID=blablabla
    /dev/sda9                  /home            ext4                 rw,relatime            0   2
    #UUID=blablabla
    /dev/sda5                  /boot              ext2                 rw,relatime             0   2
    #UUID=blablabla
    /dev/sda7                  /var                 reiserfs            rw,relatime             0   2
    #UUID=blablabla
    /dev/sda8                  none              swap                defaults                  0   0
    Thanks to everyone i also fixed my 2nd problem that i think is related to the first
    Last edited by Lilith (2012-09-28 13:15:43)

Maybe you are looking for

  • HT5634 how can i remove windows 8 from my macbook pro

    how can i remove windows 8 from macbook pro

  • ESS with ERP2005 (without a Portal)

    Hi, in the moment we are using ESS with SAP Enterprise (4.7). Now we are planning the Upgrade to ERP2005. We have several customers who has outsourced their HR Processes to us. We maintain their ESS on our SAP Servers. If we change to ERP2005 the pro

  • How to set up fire fox to confirm before deleting a bookmark

    When I delete a bookmark, it disappear immediately. I want it to ask me if am sure I want to delete, to prevent deleting something I don't want to delete, by accident

  • Remove currency symbol from currency cell format?

    This might seem like an odd question but I only want my top row to have the currency symbol and the rest of the rows to simply have the number with no currency. I know I can switch the cell format to Numbers but then I lose the formatting of how nega

  • Cannot tether nikon d810 to lightroom.

    Does anybody know how to tether the nikon d810 to lightroom? It "does not recognize" the Nikon d810 but it "does" recognize" the Nikon d800 and will start the tether down load. Is there an update for cameras in lightroom?