Why will Quicktime 7.4 not run with Windows Vista?

I've installed this several times. Even had my Dell tech rep remotely access and install Quicktime for windows Vista version 7.4. Same error message appears when I try to run: "QuickTime Player requires Windows 2000 or later" (I have VISTA) hello?!!! the error message goes on: "Please make sure compatibility mode is disabled in the Compatibility tab of the properties for QuickTimePlayer.exe". Even in the compatibility tab, Windows Vista is not even listed. I'm so frustrated! I've purchase QT Pro and can't even use it!

Perhaps this will help:
http://answers.microsoft.com/en-us/windows/forum/windows_xp-files/windows-cannot -find-cwindowssystem32rundll32exe/664c5b59-515c-472e-a872-a41f3e0562c1
Regards.

Similar Messages

Why will my I phone not connect with my IMac it pairs?

Why will my I Phone not connect with my IMAC it pairs?

Since you use the work "pairs", I must assume you're talking about bluetooth.
Unless you're trying to use the personal hotspot to tether the computer to the phone, you can't do that...
You can only use bluetooth with a computer for tethering. Bluetooth file sharing is not supported. Neither is bluetooth sync.

My office professional will not run with windows 8.1

my office professional will not run with windows 8.1 It ran fine on 7 and 8 but not 8.1

Microsoft Windows 8.1 officially supports all currently supported Microsoft Office versions including Office 2013 / 2010 / 2007 / 2003 , and may be even earlier versions unofficially. I use Microsoft Office Professional Plus on my Windows 8.1 and it runs fine with no issues. Could you try what has already been suggested by others including Big_Dave and reinstall Microsoft Office with complete reboot/restart between uninstall/new installation <restart, not shut down and start over>. If this doesn't work, please post again if installation went fine, what exactly is the error code (if any), what is the problem exactly, any screenshots ?

TS5376 I have a laptop that i am running with Windows Vista. A while ago, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.

I have an iMac as my home computer, upgraded to this about a year ago from a windows pc and love it.
However...
I have a HP Compaq laptop that i am running with Windows Vista, which I use when travelling. A while ago, I believe on an update, to either windows or itunes, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.
I have a reasonable amount of tunes stored on my laptop, and am unable to ascertain as to whether this fix for allowing itunes to work again will delete my music folder and lose all the tunes i have on my laptop already?
The contents of my music folders on my laptop and iMac are not the same, as they are not synced!
Any help please on this would be appreciated!
Pete

See Troubleshooting issues with iTunes for Windows updates. The second box covers the basic removal and repair steps. The rest is links to other useful resouces.
tt2

Will Elements 10 Item #65136385 work with Windows Vista?

Will Elements 10 Item #65136385 work with Windows Vista? I found this on Amazon.com but it lists operatingsystems only for Windows 7 and I have Vista 64 bit. Can I use this as an upgrade from Elements 7?
Thnaks.

Here is the version that does not list Vista as one of it's compatible operating systems
http://www.amazon.com/Adobe-65136385-Photoshop-Elements-10/dp/B005MMMT6E
Am I understanding it right....all versions on PSE 10 should work on Vista (as an upgrade frome PSE 7)?
Thanks.

ACROBAT XI - DOES NOT WORK WITH WINDOWS VISTA

WHY DOESN'T THE COMPANY STATE ACROBAT XI PRO DOES NOT WORK WITH WINDOWS VISTA.
THE COMPANY NEEDS TO WARN PEOPLE. THE ACROBAT TECH SUPPORT FINALLY FIGURED OUT THAT IT'S NOT COMPATIBLE WITH WINDOWS VISTA.

The Acrobat website and the box lists the compatible OSs. You want Adobe to list all of the incompatible OSs---going back how far.
Acrobat XI Pro system requirements
These system requirements are for Adobe® Acrobat® XI Pro software, v11.0. Because system requirements change with each software update, refer to the Release Notes for your software version for the latest information on supported operating systems and browsers.
Windows
1.3GHz or faster processor
Microsoft® Windows® XP with Service Pack 3 for 32 bit or Service Pack 2 for 64 bit; Windows Server® 2003 R2 (32 bit and 64 bit); Windows Server 2008 or 2008 R2 (32 bit and 64 bit); Windows 7 (32 bit and 64 bit); or Windows 8 (32 bit and 64 bit)
512MB of RAM (1GB recommended)
1.85GB of available hard-disk space
1024x768 screen resolution
DVD-ROM drive
Internet Explorer 7, 8, 9, or 10; Firefox Extended Support Release; or Chrome
Video hardware acceleration (optional)
Note: For 64-bit versions of Windows Server 2003 R2 and Windows XP (with Service Pack 2), Microsoft Update KB930627 is required.

Captivate is not compatible with Windows Vista RTM

I can confirm that Captivate 2 is not compatible with Windows
Vista (RTM Final MSDN). I have been testing it on several systems
with various versions of Vista. It had partial success with RC2,
but with RTM it crashes quite frequently (when vista is drawing new
windows). I can't tell however if captivate is directly responsible
or if it is perhaps an incompatible version of Flash (current using
latest version 9 beta) that is to blame. However, since Vista is at
RTM then I would say that it is now the responsibility of Adobe to
fix the compatibility issues with a new update. Technically vista
is not due to domestic market until january 07, however businesses
will be able to purchase vista in only two weeks, and as Captivate
is generally used for business/training use i would certainly think
that it should be of high importance that these issues are
resolved.
Can anyone else comment on their experiences with Captivate
and Vista?

Hi cptv8
I appreciate your taking the time to report back your
findings about Vista. Perhaps it will be helpful to those that are
early adopters.
You stated:
Technically vista is not due to domestic market until january
07, however businesses will be able to purchase vista in only two
weeks, and as Captivate is generally used for business/training use
i would certainly think that it should be of high importance that
these issues are resolved.
You have a valid point. However, you are making it in the
wrong venue. How? Well, Adobe doesn't normally make it a habit of
visiting the peer-to-peer support forums. This means users
supporting users. If you are concerned that Adobe is aware of this
issue, you should really consider using a different channel. The
Wish Form. And you can easily get there by simply
clicking
here.
Now I don't claim to be a guru of anything in particular, but
it seems to me that businesses are very slow to adopt things. They
tend to take a very pragmatic and slow approach. Many are just now
making the leap to XP! So I'm guessing that Vista will be slow to
gain ground. I'm also confident that the Captivate team is well
aware of the Vista issues and will be addressing them as best they
can.
Sincerely... Rick

Better privecy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers?

Question
better privacy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers? edit
Details

As a temporary workaround, I believe this Adobe management page allows you to clear your "Flash cookies": [http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html Adobe - Flash Player : Settings Manager - Website Storage Settings panel] (hosted on macromedia.com -- Macromedia was the original developer of Flash).
Regarding the script error, if I'm reading the script correctly, it is related to accessing your Flash cookies directory. It seems the publisher's support forum is not currently available for searching, but that might be a good next step.
In the meantime, could you check whether the script has the correct location for your Flash cookies directory? If you can't access Tool > BetterPrivacy, you could check here:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''bpr''' and pause while the list is filtered
(3) There should be a bolded setting named '''extensions.bprivacy.DataDir''' which looks approximately like the following:
C:\Users\''yourWindowsUsername''\AppData\Roaming\Macromedia
Do you have a similar value? If you paste the path used by BetterPrivacy into a Windows Explorer window, does it open? Also, click a couple levels in the folder, can you see:
Flash Player \ #SharedObjects
If the value is wrong, right-click the wrong value and choose Reset. BetterPrivacy should update the value the next time you try to access it.
If the value is blank, you could try inserting a sensible value and see whether that helps.
Any luck?

I just purchased Acrobat and it says it is not compatible with Windows Vista. Is this true?

I just purchased Acrobat and it says it is not compatible with Windows Vista. Is this true?

Hi joe beischel,
Kindly post this query in Acrobat forums:Acrobat
Regards,
Florence

Acrobat Reader 5.0 not compatible with windows vista sp1. What can I do?

I just got a camcoder that uses Acrobat Reader 5.0 and can view the stillshots but can't view the motion shots. It says it's not compatible with windows vista sp1. What can I do to make them compatible?

Upgrade to the latest version of Reader through here: http://www.adobe.com/go/EN_US-H-GET-READER
Also, this is not the Reader forum, but the Acrobat forum.

Why will my wifi network not work on windows 7 after bootcamp installation on my MacBook Pro?

I have recently used bootcamp to install windows 7 on my MacBook. I downloaded the software and everything to install the bootcamp setup on the windows side as well and it seems to be working well, except for when I try to connect to a wifi network. It is a secure, strong network and every time I try to connect, the same message pops up saying "the 'local area connection' is experiencing driver or hardware related problems." What can I do to fix this and successfully get the internet running on my windows side?

I have come to the conclusion that the newest Macbook Pros are equiped with wifi boards that are not compatible with Windows 7. I'd be very interested to hear if Windows 8 works better!

Tecra M5 BIOS not compatible with Windows Vista

Hi, I ran the Vista Upgrade Advisor from Microsoft and it reported that the BIOS on my Tecra M5 was not compatible with Vista and to contact Toshiba. I am currently running version 1.7 - the latest available I think. Is Toshiba going to release a version that will be Vista compatible, or a fix so that I can run Vista on my M5?
I forgot to mention that the machine is a UK M5 (PTM51E)
Many thanks,
David

David,
That's not the case. Whatever the results of the software advisor that you have run, you can install VISTA ok on your Tecra M5 PTM51E portable but obviously subject to you having purchased the license (full version or upgrade) from a local supplier, however, you will have to carry out a new (clean) installation of VISTA which means you would have to wipe your hard disk drive in the process. Obviously, making sure that you backup all of your data first to another system (or to external media) and be aware of the software that may/may not run correctly under VISTA before starting the process.
There's a new M5 BIOS released for your M5 which would then upgrade your existing 1.7 BIOS to the latest version.
The standard 512mb Tecra M5's run VISTA very well. No Toshiba software is available, however, maybe this will be released over time so you can adjust power settings and utilities as you can now under XPP.
After installing and registering/activating VISTA you will be prompted to install various updates (including an updated graphics driver and some patches.) Take these options and then your portable should work better. That said, even the standard VISTA installation works fine (AERO support appears to be improved on the new version plus it looks slightly more optimised and also runs a little quicker.)
If you are familiar with your portable, IT aware, and unsure of wiping your existing system totally, then you could also purchase a additional internal Toshiba SATA HDD kit for the Tecra M5 in order to try VISTA in the short time. Another internal 80gb/100gb HDD would give you the capability to try VISTA without losing all or your XP software and software/networking configurations, enabling you to move back to XPP should you have any (none-Microsoft) software or antivirus software issues stopping you from working after your installation of VISTA. I appreciate that there are costs associated but this would allow you to switch between XP and VISTA more easily (than wiping your current system, installing VISTA and then going back to XPP should any problems occur, not to mention the time savings that this could introduce !)
With VISTA, just take >>GREAT CARE<< with your software. Many (none- Microsoft) software applications have some issue(s) with VISTA because it is new. So, this may mean that you may have to purchase a software update in order to ensure that you have 100% compatibility with your favourite applications (or have to replace your existing software versions entirely with new ones.)
Strawberry.

WebCam Vista not working with Windows Vista

Dear All,
Pls help me, I have a new laptop with Windows Vista Home Premium, but i bought a Creative WebCam Vista (one with 3 legs and round cam-head)i think i found the right software, but the installation is not completed giving error message, and its not allowing to compelete the installation, Anyone from this forum or from creative team, please help me,
Thank you,
dixondubai

Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

ITunes does not work with Windows VISTA

If you are planning on installing Windows VISTA than do not expect your iTunes to work. It will mark all our downloads as being unauthorized to play on the Windows VISTA computer. If you try to download some new songs you will get an error. I am working with version 7.0.2 - the newest version at this time. So, beware - do not expect iTunes to work with Windows VISTA.

If you are planning on installing Windows VISTA than
do not expect your iTunes to work. It will mark all
our downloads as being unauthorized to play on the
Windows VISTA computer. If you try to download some
new songs you will get an error. I am working with
version 7.0.2 - the newest version at this time.
So, beware - do not expect iTunes to work with
Windows VISTA.
Have you had any luck with Vista and iTunes? I have the exact same problem you had. Any info would be greatly appreciated! [email protected]
Dell Other OS Microsoft Vista

WRT54G not compatible with Windows Vista?

When I used to have Windows XP I found connecting to the router simple, and reliable. However I just got a new computer with Windows Vista, and for some reason I can't seem to install the router anymore. I tried inserting the Linksys CD and I followed all of the directions and it goes to check the router's status it brings up a page that tells me to right click my internet connections or something and my computer still doesn't find the router but connects to Realtek or something a long those lines. Thanks for any help.
Solved!
Go to Solution.

As you have got internet connection on your computer...you can try adjusting the wireless settings on your router...so that other laptops can connect to your router wirelessly....
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Why will Quicktime 7.4 not run with Windows Vista?

Similar Messages

Maybe you are looking for