Why will some CDs not work properly with my Macbook Pro with Retina display?
I have the external CD drive for the Macbook Pro with Retina display, but I'm finding that some CDs will not run their applications properly. However, on the older editions of the Macbook Pro (for example, on the 13"), the programs run fine. Is there something I can download to fix this problem?
When the MBP-R does not run CD applications "properly", what does it do?
Is it possible that the applications that do not run properly are incompatible with Mountain Lion? For example, might they be old PowerPC applications that relied on Rosetta to run on Intel CPUs?
Similar Messages
-
My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk
You need to get some software that allows your Mac to read and write to the NTFS disk. There's a whole bunch of stuff out there, but this program has a good review, and you can try it for free. I would move everything off of your external drive, reformat it into Mac OSX extended, and use it for your Mac. You don't need NTFS anymore, unless you still have a Windows computer that needs it.
-
Apple care with MA515LL/A complatible with new MacBook Pro 15" retina display?
Apple care with MA515LL/A complatible with new MacBook Pro 15" retina display?
No. The AppleCare for this MacBook Pro is this
-
Why is Bootcamp is not working right on my MacBook Pro (No Bootable Device)?
I am not a computer geek but I learned a lot through reading forums and other people’s experiences. I want to use Windows 64bit in order to work on an Architecture portfolio using AutoCAD, Revit, 3DS Max, Sketchup, Photoshop, and Illustrator. I use these programs at school and on a PC and love it. I want to use these programs at home but wasn’t confortable with the Mac version so I had Windows installed on Parallels but even after upgrading my RAM to 10GB my computer was quite slow so I rather work on my projects separate from my Mac side (also, would feel less distracted) and set up Windows on Bootcamp, but I’ve encountered some issues.
I wasn’t planning on partitioning my hard drive until after updating to Mavericks. Then I noticed I did not have the option to create a Windows 7 install disk so I reprogrammed the info.plist for the option to appear. After following all three steps, the computer restarted with a black screen that read “No bootable device – insert boot disk and press any key”
-Pressing any key didn’t help so I restarted and held the alt/option key until the booting options popped up and only got
-Macintosh HD
-Recovery HD
-Did not get a Bootcamp boot option so I repartitioned the hard drive to a single volume and repeated several times and still the same thing
-I tried using Disk Utility to partition, but the results were the same
-I tried using a different Windows7.iso file and still the same
-I also tried a 2.0 and 3.0 USB thumb drive for the .iso file
-Bootcamp Partition shows up on my Finder window on the side tab under ‘Devices’ and shows up on Disk Utility, but not on Startup Disk and not when I start my computer and hold alt/option.
-I did not plug in the Windows Support Software at all (I read somewhere that said not to plug in until after Windows partition boots and installs, but didn’t even get to that point)
-Had no CD nor USB plugged in other than the flash drive that carried the .iso
-I read a comment that said to copy the files bootcamp made (WINISNSTALL) to the ‘root’ of the flash drive, but that I see they are already on the ‘root’ (unless I don’t know what root is?)
-I also tried reformatting the partition on Disk Utility from MS-DOS (FAT) to Windows FT Filesystem but fails every time
-I also made a backup, and restored the computer (took hours!) and repeated everything
-After trying almost everything, I still get the “No bootable device – insert boot disk and press any key” message.
When it gets to reformatting, I have no idea what I am doing, the only reason I am trying all these methods is because of what I read on other peoples success stories and comments, but its either my computer does not work, I am missing something, or I’m not geek enough.
-Just to let you know, the first .iso I had worked on Parallels but not for Bootcamp
-I don’t think this matters but I am trying to partition my 320GB hard drive at 70GB for the Windows side. The only thing I will be installing would be the architecture programs while my projects and files would be saved on an external hard drive.
-Computer is up to date at version 10.9.1
-MacBook is from Early 2011, 13-incher
-The only method I could think of that I did not try was using a DVD to create an .iso disk because most comments said USB gave the best results.
-Should I use my Hitachi 250GB External Hard Drive 2.0 instead of a USB Sandisk 16GB 3.0 and Verbatim 4GB 2.0
PLEASE HELP ME ANY ADVICE WOULD HELP!! And Happy Holidays!Your post is incredibly hard to read, font is way to small.
If you used Boot Camp Assistant to create a partition to install Windows to you need a REAL Windows 7 or 8 install media and license key and you have to actually install Windows on your Mac. Boot camp is only for creating a partition to install Windows and starting the Windows install from REAL Windows install media.
That Windows install media has to be a DVD disc, if your Mac has a built in DVD drive (Apple does not allow Windows to be install any other way on Mac computers that originally come with a built in DVD drive), or from a USB stick with the actual Windows install files on it (Not an ISO of the Windows install files).
So the question is did you install Windows on your Mac? It doesn't look like it from the Option key boot and the list of available Boot Devices you posted. -
I had to restore my computer. After reinstalling itunes and sincronizing with my ipod, the music files were not organized in itunes as in the ipod: some songs were missing, some albums has no cover? Why is the sincronization not working properly?
See Recover your iTunes library from your iPod or iOS device.
tt2 -
Hi Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) appears a golden triangle saying :Charging is not Supported with this accessory. Please I Need Some Help Here. Thanks =D
sounds like the cable or the iphone connector are somehow damaged
-
Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS
Many, many thanks for both of you Todd and Rick.
to Rick:
I suppose you mean the Color Settings in Project Settings as follows:
- Working Space: None
- Match Legacy ... Gamma Adjustments checked ON
But it does not correct the colors in effects. And checking or unchecking Make Movie/Output Module Settings/Color Management/Profile/Preserve RGB does not make any difference.
to both of you:
Those parts of the video image that does not have color effects are just fine. In these parts the color is preserved when reimporting to FCP. However, those parts having color effects (except Levels, as decribed earlier) have altered color results. So, only the parts having effects affecting color are misinterpreted in the image area. The mismatch is of course seen in AE, before making the movie.
What I ment with "Color Management not working properly" is that (instead of "disabling" it) Color Management does not seem to be able to correct this "misinterpretation" or difference in effect handling between AE 6 and 10.
So, would you have any solution for this problem?
Again, many thanks for your fast replies! -
I have downloaded a trial version of Dreamweaver CS6 to my MacBook. Why do some features not work?
I have downloaded a trial version of Dreamweaver CS6 to my MacBook. Why do some features not work? I have OSX 10.6.8. I am using this trial version for a class I am taking on coding webpages using Dreamweaver. there are features I am using in class that will not open up or appear as options when I use the trial version. Are certain features locked out until I buy a copy or download a purchased copy?
Trial versions have no functional limitations, though your setup/situation might not be supportive of all functionality. You'll need to identify specific issues to get help with them. You should be posting in the DW forum instead of here if your issue does not have to do with downloading/installing.
-
Why will some pictures not stream from iphone4s to ipad2,pictures taken before and after transferred ok but some won't.Any suggestions
1. Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
2. Photostream only syncs when the camera app is closed, ensure it is closed.
3. Photostream only syncs when the battery is above 20%, try recharging the device
Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back. -
hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad/ TOUCHPAD is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .
Did you download and install the Windows Support software? If you did, did you use the Boot Camp Control icon to set up the trackpad how you want it?
http://www.apple.com/support/bootcamp/
https://discussions.apple.com/community/windows_software/boot_camp -
i just brought Macbook pro(without retina display) on 15 june 2013 and when i switched it on the battery was 72 % charged and now the battery is charged to 62%, i used the charger that came with it and kept it for 6-7 hours on charging but it is not charged to 100% but why? also the green light is always on when i plug the charger with my mac book pro.Please tell me the meaning of Green light on power cord lid (mac book pro not charging or charging?) and also the other light if there like amber or any other colour.
Hello Shailendras33,
Congratulations on your new MacBook Pro! Thank you for providing all the information about what is going on with the charging issue.
Firstly, I found some information on page 11 of the MacBook Pro User Guide about what each color of the LED means on the Power Adapter:
When you first connect your power adapter to your MacBook Pro, an indicator light on the
MagSafe connector starts to glow. An amber light indicates the battery is charging. A green light indicates that the battery is fully charged.
You can find the MacBook Pro User Guide here (this is not for the latest MacBook Pro, but the information about the MagSafe adapter is true for the newest model):
MacBook Pro User Guide
http://manuals.info.apple.com/en_US/macbook_pro_15inch_late_2011.pdf
It sounds like you are not getting the amber light indicating your computer is charging, and you are noticing that the battery level is depleting. I recommend resetting your System Management Controller when something like this is occurring:
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the full article here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
My Facetime HD Camera is not working on my MacBook Pro 15" Retina Display.
I pruchased Macbook Pro 15" Retina Display on 27 Aug, 2012. But the Facetime HD Camera is not wotking. It's black screen when turn on Webcam in Yahoo or Skype. With Facetime, the Facetime Icon just animated but also dimmed after that. For all cases, the Green Led turn on. I have reinstalled OSX Mountain Lion, Resetted SMC ... but still not working. Is there anyone has some issue ? How do I know it's Hardware Failure or just OSX bug ? Please advise? Many thanks
Try an SMC reset (instruction here). Make sure you read the instructions for the right system, I'm assuming yours would fall under "Resetting the SMC on Mac portables with a battery you should not remove on your own."
If that doesn't work, the errors you're referencing are usually hardware based. I'd try in another user to make sure it's not an application error (hesitant that this would work as you're saying that the error occurs in multiple apps), but if the SMC doesn't work, I'd recommend making an appointment to get it looked at. -
I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.
Go to Finder > Preferences then select the General tab
Make sure External disks is selected. -
I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac. My Macbook Pro and the two different iMacs I tried it on were all using Mountain Lion, so the only difference was the iMac versus Macbook Pro.
I just tried this, no luck...
I connected a different USB cable, still the same problem. Tried both cables with the problematic hard drive on two different computers, still the same problem.
At this point I assume I'll probably need professional help in saving the files, thanks for the assistance. -
My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?
You just need to update it to the latest version. See:
http://kb.parallels.com/114449
Maybe you are looking for
-
File Content Conversion issue in PI 7.1
Hi Experts I am working on a file to Proxy scenario, I am getting a flat file with , separated but my file will have multiple nodes and I need to do the content conversion and map it to the following structure Interface Header InterfaceName UserI
-
How to get rid of file name that pops up with mouseover?
When a user is on my website and mouses over a link to another page, the name of that page comes up - for example, if I mouse over the link to the Mums Night Out page (while on the home page) the file name pops up (mumsnightout.html) Any idea on how
-
Better links regarding the Nvidia FX 4800 for Mac
The link I left in my earlier post did not due justice to this amazing new graphics card. Please check out these more pertinent links: http://www.nvidia.com/object/product_quadro_fx_4800_for_mac_us.html http://layersmagazine.com/nvidia-quadro-fx-4800
-
Spaces keyboard shortcut not working as expected
Hello, I enabled the Control-# shortcut to switch directly to a space but it doesn't seem to be working correctly. The only space I can switch directly to is 1. If I press Control-2, 3, or 4, it will not switch. The only alternative is to press Contr
-
Link between inv. number and accounting document number
Hi Frnds, When i receive a partial receipt (of an invoice) from a customer, i am getting the link between invoice number and accounting document number from a table (BSEG), but when i am receiving the final settlement amount from the customer, i m n