Why Windows 7 unexpected shutdown will recover itself after some time
Few week ago I had a problem which my customer's pc unable to power on and both hardisk which equipped with Windows 7 Professional unable to boot up. It was prompt me to select Windows mode (safe mode, safe mode with networking, last known configuration,
Start normally and etc). After choose last known configuration, shows Windows 7 animation about 2 seconds and restart itself repeadetly (this happen on both hardrive). After that I have no choice use Symantec Ghost restore secondary hardisk because primary
contained some important information. Few days ago, I went down to same place and try to boot primary hardisk and found that it has recovered itself. Wondering why this happen? Can someone please advice and suggest some better alternative way which quicker
than reimage the hardrive. Thanks
I have the error screenshot but "Body text cannot contain images or links until we are able to verify your account." unable to upload.
If you are being told you cant post a link, or embed a picture (or any other restriction) you just need to post to this thread saying your account has not been validated
Look for the verify your account thread that is stuck to the top of the page.
http://social.technet.microsoft.com/Forums/en-US/home?forum=reportabug
Read more here http://social.technet.microsoft.com/Forums/windows/en-US/9fe32cfb-ed1c-4b9d-93d9-7ff32b0106a3/verify-your-account-16?forum=reportabug
Wanikiya and Dyami--Team Zigzag
Similar Messages
-
Pioneer DVD-ROM will not eject after some time of system usage
I'm having an odd issue where after my Mac Pro is used for a certain amount of time (it seems variable), the optical drive will no longer seemingly be recognized. It shows up in the hardware profile for the system, however when I hit the eject key, Toast starts up instead of my drive responding. Further, when Toast or any other CD / DVD writing utility is started after this occurs, the drive is not recognized in these applications.
Any idea as to what could potentially be going on here?
The thing that throws me the real curve ball is that it DOES work for a little while when the system is restarted and then just "disappears" as noted.If it's not the original Apple DVD drive, make sure "Put hard disks to sleep when possible" is not enabled in "Energy Saver" system preference, then reboot the system.
-
[Solved] Machine shutdown after some time
Hi all,
I have a machine with an Intel J1900
It has installed:
last kernel
Plasma 5
Gummiboot
SDDM
Intel drivers
all is ok, but when the machine is some hours up, the machine shutdown by itself. This cannot be a hardware failure because It performs a perfect shutdown.
How can I start to check the issue? any idea?
thanks in advance!
Last edited by zofiel (2015-04-04 08:24:04)Any power management system installed (eg. upower) with screensaver set up to shutdown (instead of hibernate) after some time?
journalctl -b -1
look here at previous system log and see last lines if you can find anything wrong -
Hello to you
I have download game apps fifa 2014 from the app store of windows 8.1 32x on my laptop.
However, the game started to the mane screen and stopped suddenly.
The window of the game minimized to the manager toolbar on desktop and win I click on it the game work from the beginning and stopped like the first time and didn't work
Why the fifa 2014 apps suddenly started and after some seconds stopped "the window of the game minimized to the desktop toolbar
System Information Report
عام
نظام التشغيل Microsoft Windows 8.1 Pro
المعالج المركزي Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz
اسم المستخدم amjad
العرض
وصلة الفيديو Intel(R) HD Graphics 3000
ذاكرة الفيديو 1.15 GB
دقة الشاشة 1366 x 768
التخزين
إجمالي الذاكرة 2.67 GB
الذاكرة الحرة 1.05 GB
مساحة القرص الصلب 296.54 GB
المساحة الحرة 176.65 GB
I/O
الفأرة Samsung PS/2 Port Input Device
لوحة المفاتيح Standard PS/2 Keyboard
نظام الكمبيوتر
اسم الكمبيوتر SUMSUNG-I3
اسم المستخدم [email protected]
المنظمة N/A
نظام التشغيل
اسم نظام التشغيل Microsoft Windows 8.1 Pro
إصدار نظام التشغيل 6.3.9600
معرّف المنتج 00261-50000-00000-AA602
وقت تشغيل النظام 17/06/2014 23:34:21
إصدار الأنترنت إكسبلورر 11.0.9600.17126
DirectX إصدار DirectX 11
OpenGL إصدار 6.3.9600.16384 (winblue_rtm.130821-1623)
الريجستري
أقصى حجم 682 MB
الحجم الحالي 104 MB
الحالة OK
المعالج المركزي
اسم المعالج Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz
اسم الكود N/A
المنتج GenuineIntel
السرعة الحالية 2200 Mhz
أقصى سرعة 2200 Mhz
Voltage 1.2V
الساعة الخارجية 100 Mhz
الرقم التسلسل BFEBFBFF000206A7
معرّف المعالج x64 Family 6 Model 42 Stepping 7
مأخذ التوصيل CPU
L1-Cache 64 KB
L2-Cache 256 KB
L3-Cache 3072 KB
اللوحة الأم
الطراز 300E4A/300E5A/300E7A
المنتج SAMSUNG ELECTRONICS CO., LTD.
الرقم التسلسل 123490EN400015
BIOS اسم Phoenix SecureCore-Tiano(tm) NB Version 2.1 01QA
BIOS منتج Phoenix Technologies Ltd.
SMBIOS إصدار 01QA
BIOS تاريخ 05/09/2011
BIOS ميزات
PCI is supported نعم
BIOS is Upgradable (Flash) نعم
BIOS shadowing is allowed نعم
Boot from CD is supported نعم
Selectable Boot is supported نعم
EDD (Enhanced Disk Drive) Specification is supported نعم
Int 5h, Print Screen Service is supported نعم
Int 9h, 8042 Keyboard services are supported نعم
Int 14h, Serial Services are supported نعم
Int 17h, printer services are supported نعم
Int 10h, CGA/Mono Video Services are supported نعم
NEC PC-98 نعم
ACPI supported نعم
USB Legacy is supported نعم
مورد الذاكرة
إجمالي الذاكرة 2.67 GB
الذاكرة المستخدمة 1.62 GB
الذاكرة الحرة 1.05 GB
استخدام الذاكرة 60%
الذاكرة الفعلية
صرف الذاكرة BANK 0
الوصف Physical Memory 0
محدد الجهاز ChannelA-DIMM0
المساحة 2.00 GB
السرعة 1333 Mhz
المنتج Hynix/Hyundai
عرض البيانات 64 bit
نوع الذاكرة Unknown
عامل النموذج SODIMM
الذاكرة الفعلية
صرف الذاكرة BANK 2
الوصف Physical Memory 2
محدد الجهاز ChannelB-DIMM0
المساحة 2.00 GB
السرعة 1333 Mhz
المنتج Hynix/Hyundai
عرض البيانات 64 bit
نوع الذاكرة Unknown
عامل النموذج SODIMM
الأقراص الصلبة
الاسم SAMSUNG HM321HI
نوع الوسائط Fixed hard disk media
الحجم الكلي 298.09 GB
نوع الواجهة IDE
عدد الأقراص 3
إجمالي الأسطوانات 38913
إجمالي الكليّة 255
إجمالي القطاعات 625137345
مجموع المسارات 9922815
المسارات لكل اسطوانة 255
بايت لكل قطاع 512
قطاعات لكل مسار 63
S.M.A.R.T دعم نعم
درجة الحرارة الحالية 0C (32F)
CD-ROM Drive
الاسم TSSTcorp CDDVDW SN-208BB
القرص E:
معدل النقل -1
الحالة OK
IDE تحكم
الاسم Standard SATA AHCI Controller
المنتج Standard SATA AHCI Controller
الحالة OK
وصلة الفيديو
الاسم Intel(R) HD Graphics 3000
معالج فيديو Intel(R) HD Graphics Family
المنتج Intel Corporation
فيديو فن العمارة VGA
DAC نوع Internal
حجم الذاكرة 1.15 GB
نوع الذاكرة Unknown
وضع الفيديو 1366 x 768 x 4294967296 colors
معدل التحديث الحالي 60 Hz
إصدار التعريف 9.17.10.3347
سجل الأحداث 29/01/2014
جهاز العرض
الاسم Generic PnP Monitor
ارتفاع الشاشة 768
عرض الشاشة 1366
الحالة OK
Ethernet
اسم المنتج Realtek PCIe GBE Family Controller
اسم الخدمة RTL8168
المنتج Realtek
MAC عنوان NULL
Wi-Fi
اسم المنتج Intel(R) Centrino(R) Wireless-N 130
اسم الخدمة NETwNs32
المنتج Intel Corporation
MAC عنوان DC:A9:71:7A:A9:3B
Local Area Connection
اسم المنتج TAP-Windows Adapter V9
اسم الخدمة tap0901
المنتج TAP-Windows Provider V9
MAC عنوان NULL
أجهزة الصوت
الاسم صوت الشاشة من Intel(R)
المنتج Intel(R) Corporation
الحالة OK
الفأرة
الاسم Samsung PS/2 Port Input Device
المنتج ELAN
الأزرار 0
الحالة OK
لوحة المفاتيح
الاسم Standard PS/2 Keyboard
الوصف Enhanced (101- or 102-key)
وظائف المفاتيح 12
الحالة OK
USB أداة تحكم
اسم المنتج Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C2D
المنتج Intel
بروتوكول معتمد Universal Serial Bus
الحالة OK
USB أداة تحكم
اسم المنتج Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26
المنتج Intel
بروتوكول معتمد Universal Serial Bus
الحالة OKhttp://apps.microsoft.com/windows/en-us/app/fifa-14/e89c9ccf-de94-45ed-9cd4-7e11d05c3da4
System requirements
OS: Windows 8
CPU: 1.8G core2duo
RAM: 1G
GPU: NVidia card 7800 GT+ with 512M+ vram
This game is not fully optimized to work with some ATI GPU cards.
Keyboard support is not available.
try to contact game manufactured, maybe your GPU doesn't meet requirement -
dear all i have facing promblem when i download ios 6 in itune, as well as in ipad, when i start download after some time or after 200 to 300mb it stop, and a error msg shown , i have talked to apple india cutomer care and after that i disabled my window firewall, and as well as my antivirius and i also disabled my modem firewall but after that still i m unable to update my new ipad with ios 6
There is nothing in that other thread that clarifies what you did about Error 3014
Here is the description of that error:
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
i have facing a problem, my i phone is not workin properly, when i powered on then apper passcode window but after putting passcode then after some time automaiclly restart but from passcode window i can not enter further.
Okay. You are not entering the correct passcode. If you forgot or it is not taking your passcode then you will have to restore.
See http://support.apple.com/kb/HT4113 -
9iAS R2 - Windows XP - IE hangs after some time
Hi,
We are using Oracle 9iAS on Windows XP client PCs. Application runs fine, however after some time, application hangs and IE session does not respond and we cannot do anything else but to end the ie task from task manager.
It looks like Application loses connection with the database server and stops responding.
Whether anyone faced similar problems and have found out any soutions?Hi irvine74,
I am also experiencing the same problem while using Oracle Application Server 10gR2 on Windows 2000 Adv. Server and the clients are using IE on Windows XP.
1). Would u share ur experience in more detail.
2). which version of Mozilla is perfect with Windows XP 2002 SP 2.
3). Either I have to install Mozilla or FireFox.
PLS describe the Full version of Browser.
Thanks and Looking Forward.
Aamer -
Firefox Version 3.6.9 will support Mac OS X 10.8.5, as we are facing network timeout error after some time, we have checked all other settings
We cant upgrade
-
I update my iPhone in iTunes, and after some time, opened a window saying "rosolvendor conflict" and asking me to choose, giving me two options, showing the name of a friend who also has an iPhone.
Can anyone help me?Dear Tim,
I saw your message. Below are the problems:
Whenever I connect my iphone 3GS to my PC through a USB. My itunes software comes up automatically.
1. After that a message appears from the itunes that states that 'itunes could not connect to the itunes store, an unknown error cccured (306).
2. After the above, an alert message comes up which states that A new iphone software version 5.1 is availlable for my iphone. It then states would you like to download it and update your iphone now? With the options buttons as Cancel or Download and Update or Download Only. Whenever I clicked on Download and Update or Download Only, the next message that comes up is that The iphone Software Update Server Could not be Contacted and suggest make sure your network setting are correct and active or try again later.
The above is the challenges I am facing now. -
My I ph 5 once I start downloading anything it stops by itself in the middle or after some time ..
Hi Ravi4477,
I apologize, I'm a bit unclear on the exact nature or context of your question. If you are talking about downloads from the iTunes Store, you may find the troubleshooting steps outlined in the following articles helpful:
iTunes: How to resume interrupted iTunes Store downloads - Apple Support
iTunes Store: How to delete a downloading purchase on iOS - Apple Support
Regards,
- Brenden -
Anyone know why a Edge 95 MXP will call itself?
I have a Edge 95 MXP and it call's itself all the time.. the call is a SIP call from 100@it's IP address and is a 64K call. I have not power the unit off because it is up in the ceiling. The unit is also registered as a 3rd party endpoint in Call Manager 10.5....... The unit can make calls in and out to our other video units fine. I have had to set the unit to Auto Answer so it does not constantly ring.
Usually it's because your getting scanned by applications such as SIPVicous trying detect possibilities for exploiting PSTN trunks over SIP UDP.
This is typically mitigated by closing the firewall ports for the endpoint or making some changes to it's configuration. On a C/EX/SX/MX series codec running TC software that's easy, however I don't know the equivalent commands (if there are any) for an MXP codec. Though you should be able to block the scans that cause this by closing UDP port 5060 if the codec is open in your firewall. If it's going through a call control server such as a VCS you could disable UDP, I don't know about CUCM.
This has been asked many times over, doing a search of the forums for "100@" found the following results, though they all have to do with either a C Series codec or VCS, but it's all the same issue. The device is publicly reachable via the internet, it's just a matter of either closing down or adjusting the configuration of the endpoint and/or the call control server.
lot-calls-numbers-100-and-101-looks-self-calls
strange-calling-loop-c40
cisco-vcs-alarm-call-license-limit-reached
c20-phantom-callers -
Windows Restarted Unexpectedly while applying systems settings after MDT 2012 deployment.
Posted this in another forum, so I figured give this forum a try.
Hello,
I wonder if anyone can help or point me in the right direction. I've created a couple of WIMs and deployed them out using MDT 2012 and WDS running on a Windows 2008R2 server. The images are created and captured fine. Sysprep runs with no issues
and I can deploy out the images to any PC/laptop I want.
The issue I'm running into is I can deploy out this image to 100 PC's without any issue. Then all of a sudden, I'll get an error saying Windows restarted unexpectedly or encountered an unexpected error and can not continue. This will then happen
from now on with this particular image. For instance I've imaged a particular Dell Optiplex 790 multiple times with no problem, then all of a sudden I get this error on this or any other PC i image.
If I create a new image, the pattern just keeps happening over and over again. I know it's not an issue with the physical computers themselves and I can imagine something is corrupting every image I have over a certain amount of time, so I'm sort of at
a loss. Driver issue perhaps?
Thanks,
MikeI'm having what sounds like the same problem, which is why I posted it with this thread. I have been using MDT 2013 on various computers without any issues and now I am receiving the
Windows restarted unexpectedly message after the image has been applied. It will not get past the error. We only recently began using MDT 2013 with windows 2012 R2, so I don't have much experience troubleshooting. The only error I
found in the smsts.log is as follows:
User specified local data drive D: TSManager
2/6/2015 1:20:20 PM 628 (0x0274)
D:\_SMSTaskSequence does not exist TSManager
2/6/2015 1:20:20 PM 628 (0x0274)
Creating directory D:\_SMSTaskSequence TSManager
2/6/2015 1:20:20 PM 628 (0x0274)
uRet == ERROR_ALREADY_EXISTS, HRESULT=80070003 (e:\nts_sms_fre\sms\framework\tscore\utils.cpp,916)
TSManager 2/6/2015 1:20:20 PM
628 (0x0274)
Failed to create D:\_SMSTaskSequence (3) TSManager
2/6/2015 1:20:20 PM 628 (0x0274)
I am deploying windows 8 (x64 &x86) custom wim images created using Hyper-v. In my custom.ini file I use an IP address for my server and I join the computer to our domain.
1) Could the IP address be causing the problem? Should I use the full domain address for my server?
2) If the WIM file is locked somehow or unavailable, what services should I turn off on the server?
3) Any other suggestions?
I won't have access to the server for a couple of days and I wanted to get help before I start to make changes or create another image. Thank you! -
<blockquote>Removed profanity. Please read the rules and guidelines at https://support.mozilla.com/en-US/kb/Forum+and+Chat+Rules+and+Guidelines - FF4L</blockquote>
== Issue
==
I have another kind of problem with Firefox
== Description
==
== Firefox version
==
3.0.19
== Operating system
==
PPC Mac OS X 10.4
== User Agent
==
Mozilla/5.0 (Macintosh; U; PPC Mac OS X 10.4; en-US; rv:1.9.0.19) Gecko/2010031218 Firefox/3.0.19
== Plugins installed
==
*-Netscape Navigator Default Plug-in
*Runs Java applets using the latest installed versions of Java. For more information: Java Embedding Plugin. Run version test: Java Information.
*The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site.
*Shockwave Flash 10.0 r22
*The Flip4Mac WMV Plugin allows you to view Windows Media content using QuickTime.
*DivX Browser Plug-In: Plays DivX video in your browser!
*Macromedia Shockwave for Director Netscape plug-in, version 10.1.1
*Java 1.3.1 Plug-in
*Java 1.3.1 Plug-in (CFM)I also have this problem of Firefox updating by itself (also the add-ons) even when I turn off auto-update.
Sometimes you do not want to update or download a large file; because you're working offline, have a slow connection, or have a very low download allowance etc. Usually the update doesn't work and cause Firefox to crash. After that it cannot be started again. This is with Firefox Portable but I think I've had this problem the normal Firefox. With the portable version I can just back up a single folder but it is still time wasting and annoying.
I've noticed that when I start Firefox with auto-update turned off from the previous session, it changes the options to auto-update by itself, it also does this periodically. So every time I start Firefox I have to turn off auto-update, and I have to check again from to time, like a few times a day, because Firefox will by itself turn back on the auto-update. -
Since downloading Yosemite, Safari will close itself out, when I reopen it all of my pages are gone. How do I stop this from happening?
But if iit won't stay open, then it's quitting unexpectedly which is the same as a crash.
There has to be a reason for that which a crash report should reveal.
Check ~/Library > Logs > Diagnostic Reports -
Windows 7 Unexpected shutdown Blue screen error
I am running Windows 7 64bit on a new HP Pavilion desk top that came with Windows 7 installed. The systems shutdown for no apparent reason and goes back to log in screen. When I reboot, this is the message I get.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 116
BCP1: FFFFFA800787F010
BCP2: FFFFF88004829490
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\110209-17316-01.dmp
C:\Users\Molson\AppData\Local\Temp\WER-1178946-0.sysdata.xml
PLEASE HELP! This is getting old. It happens several times a day!Hi, please can some one help me. MY blue screen seems to happen alot when I'm on the web. I have attached my error report below.
<!-- /* Font Definitions */ @font-face {font-family:"Cambria Math"; panose-1:2 4 5 3 5 4 6 3 2 4; mso-font-charset:0; mso-generic-font-family:roman; mso-font-pitch:variable; mso-font-signature:-1610611985 1107304683 0 0 415 0;} @font-face {font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4; mso-font-charset:0; mso-generic-font-family:swiss; mso-font-pitch:variable; mso-font-signature:-520092929 1073786111 9 0 415 0;} @font-face {font-family:"Segoe UI"; panose-1:2 11 5 2 4 2 4 2 2 3; mso-font-charset:0;
mso-generic-font-family:swiss; mso-font-pitch:variable; mso-font-signature:-520084737 -1073683329 41 0 479 0;} /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {mso-style-unhide:no; mso-style-qformat:yes; mso-style-parent:""; margin-top:0cm;
margin-right:0cm; margin-bottom:10.0pt; margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Calibri;
mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} .MsoChpDefault {mso-style-type:export-only;
mso-default-props:yes; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Calibri; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New
Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} .MsoPapDefault {mso-style-type:export-only; margin-bottom:10.0pt; line-height:115%;} @page WordSection1 {size:612.0pt 792.0pt; margin:72.0pt 72.0pt 72.0pt 72.0pt; mso-header-margin:36.0pt;
mso-footer-margin:36.0pt; mso-paper-source:0;} div.WordSection1 {page:WordSection1;} -->
Problem signature:
Problem Event Name:
BlueScreen
OS Version:
6.1.7600.2.0.0.256.48
Locale ID:
2057
Additional information about the problem:
BCCode:
d1
BCP1:
00000000
BCP2:
00000002
BCP3:
00000000
BCP4:
8B04528F
OS Version:
6_1_7600
Service Pack:
0_0
Product:
256_1
Files that help describe the problem:
C:\Windows\Minidump\082610-22183-01.dmp
C:\Users\Akanbi\AppData\Local\Temp\WER-59186-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Please let me know if you need more information or have a solution to this query.
Thanks.
Maybe you are looking for
-
IPod not recognised by windows
I bought a 20 gig colour iPod yesterday, have managed to format it for windows and install i Tunes, but when I connect the iPod to my laptop via USB 2.0 port, it doesnt come up anywhere, even in 'My Computer'. It just sits there saying 'do not discon
-
Creating new String using only specific set of chars from another String
I've performance troubles doing this task: I have a very long String A (up to 1 million character length) This String contains different characters. I need to create a String B containing only specific characthers (with a defined character code) An e
-
Mountain lion download wont work on my computer..why?
i have the mac book version 5.2 i think, the white one before the macbook now. i have snow leopard currently running on my mac, and i went into the app store and clicked to buy the mountain lion, and it said " OX S mountain lion is not compatabile wi
-
DW CS5 - Find/Replace using RegEx
Hello, everyone. I am working on some inherited code, and the previous people used some named anchors; some are properly closed, most are not. There are over 100 of them that I don't want to correct manually. Examples: <a name="this"> <a name="that"
-
Why can't I create property nodes for item in STRICT typedef cluster?
I've tried this in LV7.0/WIN2k and LV 7.1/OSX - both versions work the same. I have a TYPEDEF consisting of a cluster of items A, B, and C. I have a front-panel instance of this typedef. Under certain conditions, I want to disable and gray Item C, be