Why with last update of mevericks usb ports and xcode not works ?

yesterday i install the last update of maverick and now i cant use the time machine, usb key and xcode
do you have a solution for that ?

Just waking this thread up again in case anyone has had any other ideas.
Since last posting, usb became functional again, (came back on a couple of hours after a restart) and as long as I kept the machine alive, usb would stay alive. Bluetooth came back on briefly, but for most of the time was unavailable. System profiler shows no problems and Console does not report any usb related errors as far as I can see.
After a recent restart, usb disappeared again, and despite numerous restarts and being left on for a couple of days (and subsequently left off for several days) it has not come back. When usb is not working, examining the system profiler (through screen sharing from my macbook) usb shows no errors, but also shows no connected devices. I can charge my ipod nano with any of the usb ports (front or back), so power does not seem to be the issue.
I can't reset pRAM (because the keyboard is not available at boot), but have reset SMC numerous times. Have tried other keyboards, and mice. No joy.
I seem to have run out of ideas. Any suggestions?

Similar Messages

Mac Pro USB ports and bluetooth not working

I have a Mac Pro (early 2008) Quad-Core Intel Xeon, 2.8 GHz, 4GB ram, Airport card, Magic Mouse. Suddenly the keyboard and wired/bluetooth Mouse are unavailable, so it is not possible to control the computer. The only way I can use it is by using Screen Sharing from my MacBook Pro - which is obviously pretty useless except for diagnostics! All the USB ports (front and back, as well as those on the Cinema Display - when connected) are dead. System profiler shows no problem with them, but also shows nothing connected. Bluetooth in menu bar shows as "Bluetooth: not available", and in system profiler shows as "No information found".
I've tried all the usual remedies. Powering off overnight with power cord disconnected, all peripherals disconnected, then booting up again. Holding in the power button for ten seconds when the power cord is disconnected. Obviously I can't reset the pRAM (because the keyboard is not recognised, even before the OS loads). The first couple of times I tried this process, it did bring back the USB ports, even the bluetooth became temporarily available, but soon disappeared again. USB ports died next time I rebooted.
However, in the last couple of days, the process produces no results. No matter how long I leave it disconnected, USB ports are not working and bluetooth is just not there...
I've checked for other threads on this topic, but most other people seem to have issues with either front or back USB ports, or even just one or more individual ports. My problems have only been with all ports or none.
Does anyone have any suggestions to get my MacPro up and running again properly?

Just waking this thread up again in case anyone has had any other ideas.
Since last posting, usb became functional again, (came back on a couple of hours after a restart) and as long as I kept the machine alive, usb would stay alive. Bluetooth came back on briefly, but for most of the time was unavailable. System profiler shows no problems and Console does not report any usb related errors as far as I can see.
After a recent restart, usb disappeared again, and despite numerous restarts and being left on for a couple of days (and subsequently left off for several days) it has not come back. When usb is not working, examining the system profiler (through screen sharing from my macbook) usb shows no errors, but also shows no connected devices. I can charge my ipod nano with any of the usb ports (front or back), so power does not seem to be the issue.
I can't reset pRAM (because the keyboard is not available at boot), but have reset SMC numerous times. Have tried other keyboards, and mice. No joy.
I seem to have run out of ideas. Any suggestions?

Firewire, USB ports, and Spotlight not working

When I got home and booted up my iMac G5, I noticed that my 4G iPod was not recognized by FInder and iTunes, like it did before. When I tried resetting my iPod, I checked and it was working fine. Then I tried changing the port to which my Firewire connection was. Still nothing. I tried shutting down, but midway, it hanged. I had to do a hard reboot (pressing the power button for a few seconds) When it started up again, I noticed that my External HD, connected by USB was not recognised. The weired thing is, it recognised the other external HD( I have two connected by USB). I wanted to search in the HELP section for troubleshooting tips but when I typed in Spotlight, it wasn't working. I tried it in both the Desktop and Finder. Not working. Even Software Update hangs on me. WHAT DO I DO? HELP!
Another thing, My iPod is still working and is still being charged by Firewire, even though it doesn't appear on my desktop, iTunes and Finder.

Perform all the "usual diagnostic routines" to see if it cures the problem:
1.Repair Disk Permission then restart the Mac and see how...
2.If this doesn't work, boot from the OS disc and run Disk Utility; If Hardware Test is on the same disc, usually the DVD version, run it too to determine everything is OK
Good luck and cheers; Oh, it's best you run all these with all extra accessories, pheriperals etc plug out, i.e. meaning only your keyboard, mouse is plug in, do note that running the Hardware Test may require a wired keyboard and mouse.
Cheers

Last update to ios6 - worst ever, facetime does not work as it used to, problems with skype

last update to ios6 - worst ever, facetime does not work as it used to, problems with skype, losing connection or no9t connecting facetime to face time. Do something with it.

I'm not sure yet, but It may be as simple as "settings", "FaceTime" "Off"

Usb composite device is an older usb device and might not work in USB 3

I recently bought one Lenovo Yoga 2 11 laptop running Windows 8.1 (64 bit).
When I try to connect my old Brother MFC-3240C printer using USB (2.0), it doesn’t work.
Below are the steps performed:
Connected the printer to USB 2.0 port on laptop (on the right side). Automatically installed the printer driver (no exclamation mark beside printer icon)
When the printer didn’t print, I tried to use troubleshoot as below:
Control Panel->Hardware and Sound->Devices and Printers->Right Click on Printer Icon->Troubleshoot.
It came up with USB composite device is an older usb device and might not work in USB 3.0
Removed the printer and re-installed the driver. It is all the same.
Any help will be greatly appreciated.
FYI – the same printer works fine with my older laptops running Windows 7.

Already checked Brothers website for the printer drivre for Windows 8.1 (64 bit).
It says ... The built-in driver is already included with Windows® Operating System or is available through Windows® update.
So, installed the default driver for the printer that is available with Windows 8.1.
Even connected the printer with USB 3.0 port on the laptop, but it is all the same.

I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

Are you connecting your iPhone directly to your PC or to a USB hub?

Apple LED Cinema Display -- USB Port + iSight Camera not working

I see an unusual problem with my brand new LED Cinema display. When i put my Macbook pro in sleep mode it deactivate all the USB ports and isight camera in LED Cinema Display. When I turn the computer back on I cannot use USB or iSight camera. I tried below solutions -
- Restarting the Macbook pro and LED cinema
- Completely draining the power in both LED Cinema and Mackbook pro.
- Resetting Macbook pro.
- Upgrading LED Cinema to latest and greatest firmware ( firmware update 1.0)
Did anyone encounter this problem ? If yes please post your thoughts or any solutions.

After numerous attempts of powering down/resetting the macbook pro and led cinema i was able to make the USB ports work. However I was able to successfully reproduce the problem once again by putting the mackbook on sleep mode.
I finally ended up shipping my led cinema back to apple for a replacement. I will try the test case with the new one when it arrives.

USB devices and Webcam not working or installing on Pavilion Laptop

Hi there,
I have a HP Pavilion Dm3 1030 sa,
For a while now certain USB devices have just not worked on the laptop, specifically printers and mice, despite me reinstalling the drivers for those devices on the laptop. I tried the devices on other computers and they worked fine.
This was annoying but I put up with it.
Now the webcam and microphone have stopped working and are no longer recognised by the computer. I have reinstalled the webcam software but cannot find the drivers for it. The software (arc soft webcam) says the inbuilt webcam is not connected.
I have been able to get my iphone to connect via usb and usb drives work most of the time. I don't really know what is going on. When I look at devices that don't work in device manager It says that there is a USB I/O error. I have tried reinstalling the drivers using device manager but that didn't work either. Any advice would be appreciated. Not being able to use a mouse is annoying as track pads are slow.
Pn vj409ea#ABU
Is my notebook in the warranty period? No (three months out)
Is the originally installed OS still installed (Yes)
Have I changed the partitions (NO)
Thanks for any help
Kieran Latham

run an extended _*Apple Hardware Test*_.
JGG

T400 - crappy USB ports and refusing to work with HP keyboards

Hello forum,
I work in a large multinational company and all of our laptops are now IBM Thinkpads from T60's, T61's, and now of course they're Lenovo T400 and T410 laptops.
Also we still have some of the Thinkcentre towers.
There seems to be other people with the same problem where the weak plastic / incorrectly sized ports are causing problems.
Well i've just had my 4th Lenovo laptop cause problems and so far they've all be T400's or T410's with the exception of one Thinkcentre.
Each time there is a problem its because the crappy plastic they used to make the usb port pin protector has snapped off except in the case of the Thinkcentre PC.
The problem is that the vast majority of our keyboards are the basic HP keyboard and all of a sudden the keyboard stops working with the laptop.
The keyboard could be working fine for weeks months or days and then all three lights will light up at the same time on the keyboard (num lock, caps lock and scroll lock) and the keyboard will no longer function.
The only work around for the problem is to swap out the keyboard with an older Fujitsu Siemens Keyboard, or if i can find one an actual Lenovo keyboard.
Do some lenovo systems have an allergy to HP keyboards?
Or could someone tell me if theres a different cause for this problem.

which HP keyboards are you talking about? there are quite a few different model of HP keyboard used by businesses.
Also, is this problem caused by one keyboard or multiple HP keyboards?
Keyboards should be designed with interoperability, but sometimes a usb could be badly designed where it pinches the usb ports.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Why does N97 charge from some USB port and some no...

OK some seem to have same sort of troubles but I couldn't find an answer to this one...
So I have a N97 that charges OK when I plug it in computers USB port or in a (powered) hub.
But I also have a USB power adapter that I can plug in a wall socket and it has one USB port (5V/1A) and nothing happens.
Same happens when I plug it in my car using a USB adapter (not a actual car charger for N97).
Since every other phone/MP3-player/device that can be charged via USB works with these, I have to asume that this is something with my phone...
Has anyone else faced this and have found any solutions?

OK I have some additional info to this one.
I made some experiments with different chargers and cabels and here is the most interesting result (in my oppinion)...
In both cases I used my N97 and the USB power adapter (with 5V/1000mA output).
Only difference was how I connected the two...
By using the data cabel (Nokia CA-101) that came with the phone and nothing it DOES NOT charge the phone.
(and yes it is working cable, since I use it to sync my phone with my PC and it does charge the phone via PCs USB).
By using USB->2mm plug adapter (Nokia CA-100) and the 2mm plug->micro-USB adapter (CA-146C) it DOES charge the phone.
Since CA-100 converts USB to more simple connector then there must be something more happening inside CA-146C than just relaying those wires forward...
Any ideas???
Attachments:
charges.jpg ‏289 KB
no_charge.jpg ‏404 KB

My laptop macbook pro has a problem with usb port they are not working.

hi there i have a late 2011 mac pro, its been 2 years of purhase however reary used, now it has a problem with usb port are drawing too much power and usb ports are dissabled from the system. now i can not use usb ports. do yo have solution for it??? cheers

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

USB port 1 & 3 not working, BT not available

iMAC 27", Mid 2011
The USB port 1 & 3 (1 is near the firewire port) are not working, also Bluetooth is not available.
I try to reset PRAM and SMC but it didnt change the situation.
When executing Hardware Test (Diagnostics) no errors are found (short and long test). When in the hardware test, all USB ports are working.
AND afterwards when restarting Mavericks the USB port 3 works again - but when I then unplug the mouse, put it to port 4 and back to port 3 it does not work anymore. (I didn't check if the same happens with port 1).
Any suggestions how to fix it?
Thomas

Unfortunately it doesn't change anything.
Yesterday I reinstall Mavericks from scratch (erase hard disk and install OS). Now no bluetooth icon appears in the menu bar - even not in system preferences.
Some further issues I notice but I'm not sure if they are related to the bluetooth issue:
it takes about 60sec. after a reboot/restart until the apple logo appears and the progress indicator is running
I found a lot of USB error messages in the logs:$ sudo dmesg | grep USB
USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
USBF:    6.179    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
USBF:    12.182    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
USBF:    12.215    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa110000)
USBF:    18.188    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
USBF:    24.191    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
USBF:    24.222    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 3 of Hub at 0xfa110000)
USBF:    30.195    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
USBF:    36.200    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
USBF:    36.231    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0xfa110000)
USBF:    42.205    AppleUSBEHCI::Found a transaction which hasn't moved in 5000 milliseconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
It seams to me like the internal USB hub is in trouble.
Unfortunately I can not compare it to a working iMac.
ThoMo

17" MBP Left side usb ports and audio stopped working

Hello All,
I have a situation here with my MBP. A couple months ago it stopped detecting my airport card (not installed), I replaced it with another one which still showed as not having a card installed. So, I have just been using a usb wifi adapter which has been working fine, but recently the 2 usb ports on the left side have stopped working as well as I lost any sound. I've tried with or without headphones, still no sound it just shows a greyed out speaker and a circle with a line through it when I try to adjust volume. My initial thought was that the left I/O board was bad, but the dc-in board continues to work which, I believe, is part of the left I/O board. Any help or ideas would be greatly appreciated!

Is the machine at least 4 years old? If it is symptoms you are getting is a sign the PRAM battery is about to go. Get it replaced. If not, try zapping the PRAM.

My usb port drivers are not working

i have purchaced new hp sleekbook os-win8, but after few days the usb drivers are not working what shoud i do
This question was solved.
View Solution.

What did you plug into the usb port.
Have your tried multiple devices?
When was the last time they worked?
Try removing the drivers in device manager.
Then reboot and let them reinstall
If that fails the try a System Restore to previous date when they did work.
Here is how to do a System Restore
http://www.youtube.com/watch?v=CsY_FnyJzdo
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

With HP update for Maverick my photosmart C309A does not work properly

After the HP-update for Maverick my printer HP Photosmart C309A does not work correctly. The scan facility is gone and the printer "hangs" after one print. I had to reset the printer software from a backup and to disable the automatic installation facility on my IMac. Shortly, very very very nasty. I hope this is the way for Apple to change this update into a good one. There is no other way to communicate with Apple then through the Community. I wander if Yosemite gives the same problems with printers.

You are welcome.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Some people have solved this by restoring their previous driver from their backup.

Why with last update of mevericks usb ports and xcode not works ?

Similar Messages

Maybe you are looking for