Why won't 110 min video not fit DVD when using Compressor Best 120 min

I have a standard DV video lasting 110 minutes. I have exported it as a DV clip and imported that clip as an asset in DVD Studio Pro 4. Build fails with a not enough room on the output media message. I have also exported from FCP using Compressor set to the Best 120 minute setting with the same result. Shouldn't 110 minutes fit on a standard DVD using either of these methods?
What's up? What can I do to get this material on a standard DVD?

If you are using a 4.7gb DVD and the video is 110min then use the 120min preset then click on the icon that shows you the "estimate size". In my opinion it is very accurate, but it doesn't include the audio in that calculation. So just bring down the Mbps (the top slider) down about .5 of a bit rate and then your audio should fit just fine and you can use the 120 min setting.
You do this, you click your "video" or MPEG icon in the "untitled" tab. Now look in the "Inspector" to the right. See the "estimated size"? Now click on the "encoder" icon (second to the left), Click "Quality" tab, and adjust the "Mbps" down about .5ish.
"Liiiiiiiiiiiiike a glove!"

Similar Messages

Why won't my macbook pro not burn DVDs

I have all the software, it allows DVD+R. But it won't burn correctly.

What software are you using to burn a DVD? You can burn data DVDs directly from the Finder - if that will work for you then any other burning software should work as well. I use Toast Titanium and iDVD to burn DVDs (as well as Finder burns) and all work well for me.
Clinton

Why won't a TV series burn to DVD

Have bought a TV series called Black Books. Downloaded it then added to a playlist and burn to DVD. Does not seem to play. How to fix this please for someone with no understanding

LZecca77
I seen that happen when the system resources have not kept pace with the project or automatically generated files?
What is the computer operating system that you are running Premiere Elements 10 on? At this point, can you still burn to folder if not disc?
Have you checked the Adobe Folder for pile ups of preview files and conformed audio? Have you cleaned out the conformed video files via Edit Menu/Preferences/Media? Have you run a regular and registry cleaning (computer optimizing) program such as ccleaner?
Another aspect is the nature of the Timeline content? Have you expanded the Timeline with the -+ slider above the Timeline to get a good look at the track situation, especially searching for thin vertical black lines scattered about the track content and any other irregularities with regard to Timeline menu marker spacing, transitions, and such? You could give some details on how many menu markers and what kind and where placed and how much space between?
How large is this project? When you get to the burn dialog what does the Quality Area show for Space Required and Bitrate? What type of DVD are you using? Can I assume that your project preset is NTSC DV Standard and you are burning your Timeline content to DVD-VIDEO Standard on DVD disc (4.7 GB/120 min)?
What is the duration of your Timeline content? How many main menu pages, how many scene selection pages?
Let us start here and see where your answers lead us.
Thanks.
ATR

Why won't voice generated text not display as I speak?

Why won't voice generated text not display on the screen as I speak?

All you get in 10.6.5 is spoken COMMAND recognition.
Dictation requires 10.8 Mountain Lion or later:
Mac Basics: Dictation lets you speak text instead of typing

Why won't u-tube videos play in safari?

Why won't u-tube videos play in safari?
I am using OS X 10.7.3
Safari 5.1.5

There wasn't an answer, just a question. If you can provide a little detail around what's actually happening, and more about the environment (e.g. what model computer, its configuration, etc) it'll help people provide a solution .

HT4589 When using compressor voice is not sync with video. What causes this and how to fix it, please?

When using compressor voice is not sync with video. What causes this and how to fix it, please?

Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on.

Why cant i receive a video from an android phone using ravid app

why cant I receive a video from an android phone using the ravid app

http://support.apple.com/kb/ts5185 per this link contact Apple support.

2010 Mac mini Superdrive not burning DVD's

My mac mini is not burning DVD's right. I put in a 500GB harddrive a few months back and the SATA cables are attached correct. I can read DVD's but writing DVD's doesn't work. The process finishes but when after I eject the disc I can see that nothing is burning in the inner most part of the disc. When I put the disc back in the computer thinks the disc hasn't been burned and asks if it shuld be open in finder like a blank disc. I know a cd/dvd should burn from the center and spiral outward as it writes more data but it seems the disc is offset when it writes its first data, leaving the inner most part of the disc blank. Maybe I should reformat the OS and start from scratch to see if that helps. Any other ideas?

Strange these Memorex DVD's worked flawlessly a couple of times then I started getting these srange burns. I think I'm going to blitz this install I'm backing up with time machine now so I'll see what happens. Is there anyway to reapply an EFI update to make sure nothing is corrupt? I did notice what looked like brownish black burns on the logicboard when I opened it up to put the new harddrive in. They were on the long solder traces where they test the logic board by the the logic boards sata connections. I keep the system on 24/7 but don't really play any 3d or do anything that is too processor intense. Another thing is the superdriver seems to favor the left side when a DVD is initially inserted and ejected but moves to the conter when pressed all the way in I can't remember that being normal.

Why do I get a "computer not authorized message" when it is authorized?

Does anyone know why do I get a "computer not authorized message" when it is authorized and how to fix the problem? I downloaded a couple of new apps on my iPhone and these wont sych with my iMac

i have the same problem but i have not found a way to fix it

HT4623 My iPad mini does not make noise when typing

My iPad mini does not make noise when typing

Settings>Sounds>Keyboard Clicks>On. If the setting is correct, you may have muted system sounds.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

My Mac Mini is not starting, but when it does it goes to the grey screen, but sits there making a clicking noise

My Mac Mini is not starting properly, when it does it goes to a gray screen, but sits there making a clicking noise

Welcome to Apple Support Communities
What OS X version have you got? Press Option key and check if you can select OS X

I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.

I have a HP610-1150f. not recording sound when using webcam in touchsmart screen. I have looked thru this forum and I don't see anyone else having this problem. (unless I missed it). The recording works in Notes, but not when I open Webcam and try to record from there. video recording works fine. I have had this computer less than a month and I am having a couple of problems with it. Still loving it though.

Hello schae731: Welcom to HP Forum and your new Touchsmart. You need to contact HP Direct Support on line your Touchsmart comes with one year warranty so use it why you can. You can contact them through your HP Support Assistant or on line. They will help you with trouble shoot the web-cam software. Goto your computers model and make support web-site. They will also help you with your other issues as well.
I am using the older version software so I won't be much help. Please repost if HP direct support is un able to help you resolve your issues. While you are chatting with them have them check out your computer do it before your 1 year warranty expires. Have fun with your new computer.

Why is the search and logins fields are black when using AOL

Why is the search and logins fields are black when using AOL??

M3nth,
Seems like we're all asking the same question
As tst says... try not to use the one at the bottom.. it's ... hummm..
It's behavior is unpredictable...
As for the multiple listing I'll have to read Molly's response on this (I asked the same question is the "Xtreme thread")
JLV
=== EDIT ===
Hi Molly,
I read your answer on the bottom search engine..
That's what I thought it did... but it didn't work for me.. I tried to use it to find some of my own posts within LV.. and it didn't find anything.
The search was : serial
I did this while reading a LV question of the subject.
I shall experiment with the search engine again and report my findings.
R.Message Edited by JoeLabView on 03-17-2005 02:24 PM

Why do I have to constantly relog my password when using this site?

Why do I have to constantly relog my password when using this site?

That's correct, regardless of browser used I could close my browser and not have to log in, but typically that only lasted for a few hours. Something in the re-design seems to have made it such that you have to sign in each and every time to re-open your browser and come here.

Can not print report when using HTML or DHTML

Can not print report when using HTML or DHTML. When I open the report and click the print icon I get a small blank dialog box and then nothing. If I change to activex it works and I can print.
Any Ideas?
Thanks
Jeff

Hi,
I did not come across this situation before. Did you apply any fix packs. Try to check whether its a issue which can be fixed by applying fix pack( try to check release notes of fix pack and see if they mentioned any thing about this).
Thanks,
SK.

Why won't 110 min video not fit DVD when using Compressor Best 120 min

Similar Messages

Maybe you are looking for