Why won't a 2.99gb .mp4 movie sync with my 7th gen iPod Nano when there is 4.13 gb free?

Please help! Thanks!

If it's that big of a file, it is probably "HD."  That is too high a resolution for the screen on the iPod nano, so iTunes will not sync it.  The "SD" version of the movie should work.
FYI - The specs
http://www.apple.com/ipod-nano/specs.html
say the max resolution for the 7th gen nano is 720 x 576.  You can see what the resolution of the video is by doing a Get Info on the video in iTunes.

Similar Messages

  • 7th gen iPod nano won't turn on after disconnect.

    7th gen iPod nano won't turn on after disconnect. I loaded some new music, synced and ejected correctly. screen went black on unplug. Waited, did the button trick, didn't work. plugged it back in & it is recognized immediately. restored, resynced & ejected again. same thing-black screen w/ no response. Charged it overnight. ejected, screen then went to language setting. OK for English, eject & back to black on unplug. Switched ports for cable, tried eject thru PC...all resulting in dead nano after unplug. I really don't want to charge into the store & take it out on the poor kid who will catch the brunt of my frustration. anyone have a suggestion?

    Hello Marie,
    I would be concerned too if my iPod nano was not powering on.  I found an article for the 6th generation iPod nano that has steps you can take for an issue like this (the only difference for the 7th generation iPod nano is the steps you will take for the reset. I included the steps to reset a 7th generation iPod nano below):
    Will not turn on or screen remains dark
    Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
    If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    If the screen remains dark and will not turn on, then your iPod may need service.
    You can find the full article here:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    All the steps apply to the 7th generation except the steps for the reset.  To reset a 7th generation iPod nano, use these steps:
    Press and hold the Sleep/Wake button and the Home button for six seconds, or until the screen goes dark. The Apple logo appears after a few seconds, and then the Home screen. You may need to repeat this step.
    I got these steps from this tutorial, which may also help with your iPod not appearing in iTunes:
    iPod nano not appearing in iTunes
    http://www.apple.com/support/ipodnano/assistant/itunes/
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Why won't my iPhone 4S will not sync with iTunes?

    Why won't my iPhone 4S sync with iTunes?

    I tried a bunch of stuff and it's finally working:
    turn off find my phone in icloud
    put phone in airplane mode
    turn off auto-lock
    in itunes, uncheck automatically sync iphone when connected.
    then click on sync in the lower right corner.
    I hope this fixes it permanently, we'll see......

  • Why won't the books from my itunes sync with my ipad?

    I am wondering why the books in my itunes on my pc won't sync with my ipad?

    Error messages:
    1. Some of the videos in your itunes library, including the video "Derezzed by Daft Punk", were not copied to the iPod "Ba25's iPod" because they can not be played on this iPod.
    2. Five different videos (podcasts - TV and Film) were not copied because the video format is not supported by the iPod "Ba25's iPod".
    I've had other podcasts sync onto my iPod from a few years ago.

  • 7Th Gen Ipod Nano won't Sync

    My Girlfriend got a Brand new ipod nano fior chriistmas when we first tried to set it up itunes did not recognize the device, so we updated itunes to the lastest version and alas it recognized the device. unfortunately it would not sync i updated the ipod software through itunes without an issue, but it still will not sync when ever i try to sync, it flashes in the status bar for hardly even a split second and then it's over i've checked the properties to everything i can think of i've restarted quite a few times including factory resets. i don't know what is wrong or what i'm doing wrong any help would be appreciated

    Same prob here.  My new iPod Nano, 7th generation won't sync to my existing iTunes Library.  My previous ipod syncs fine. Here's what happened. I connected my new one using USB port on my PC (os Windows 7).  I then followed the onscreen instructions. I registered it, and updated the iPod software, and then I got to the sync step.  I pressed the sync button several times and it would not sync.  I did not get any error message. The iPod does appear not on the left hand pane. ( I think that was version 10) It does appear on the RIGHT side as my "ipod 16GB" (My old ipod was 8GB).
    Any help would be greatly appreciated!

  • Why won't my iMac (Snow Leopard) iCal sync with both iCloud and iPhone?

    No matter how many times I enter all the correct info neither iCloud or iPhone will pick up my entries on my iMac.
    Also, there is no iCloud ikon in my preferences for waht that's worth.

    Once you enable iCloud, your iPhone will no longer sync properly (or at all) with iCal UNLESS you upgrade to OSX Lion. I tried various techniques yesterday for about an hour to see if I could get all three on the same page, but I could never get it to work. Items would appear in one or two place, but never all three. iCal won't sync at all to iCloud without Lion. This is not a secret: Apple states in its promotional materials that you need Lion to use iCloud on your Mac.
    I posted this to another similar question last night, but it needs to be repeated:
    This is the kind of thing that I hate, hate, hate about Apple.
    Why is it that if I bought a Mac before July of this year, I must pay to upgrade my operating system in order to take advantage of iCloud? Meanwhile, a Windows Vista SP2 user, who bought a new computer in May 2009, already has everything they need on their computer to use iCloud.
    Why was it possible for Apple to write a free iCloud Control Panel that was compatible with existing versions of Windows, but Mac users must buy an entirely new operating system?
    It's not the price that bothers me – I've already paid for it. But Lion was such a buggy mess and the interface "improvements" so useless that I "downgraded" back to SL. Now I find that I must choose between a terrible operating system and the features in iCloud.
    If Apple gave Mac users the same amount of backwards compatibility that it gives to Windows users, people with OSX 10.5 (Leopard) would be able to use iCloud. That's something to think about the next time you go to purchase a new computer.
    (P.S. Something else to think about: If you bought a Mac before October 2007 (when OSX 10.5 was introduced), your computer won't run iTunes 10.5 unless you buy an upgrade. But a PC user, who purchased their computer as long ago as Sept. 2004(!), can run iTunes without an OS upgrade.)

  • Why won't my iphone 3gs will not sync with itunes???

    My Iphone 3GS will not sync with itunes on my iMac computer. Currently the device is plugged in and recieving a charge. I am operating the version 10.6 in itunes and the version OS5.1 on the 3GS. Can anyone help me figure this out?!?!?!

    try this article
    iOS: Device not recognized in iTunes for Mac OS X
    Products Affected
    iPad, iPhone, iPod touch, iTunes 10 for Mac, iTunes 8 for Mac, iTunes 9 for Mac
    Symptoms
    If your iPhone, iPad, or iPod touch does not appear under Devices in iTunes after you connect it to your Mac, refer to the troubleshooting suggestions below.
    Resolution
    Note: This article is for Mac OS X users. If you are using a Windows PC, please refer to iOS: Device not recognized in iTunes for Windows.
    To begin troubleshooting this issue on your iOS device, first follow the steps in the appropriate troubleshooting assistant below:
    iPhone Troubleshooting Assistant
    iPod touch Troubleshooting Assistant
    iPad Troubleshooting Assistant
    If the issue persists after following the troubleshooting assistant, continue with the steps below, testing to see if the issue is resolved after each section.
    Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch. iTunes 10 and later requires Mac OS X v10.5.8 or later.
    Update to the latest version of iTunes and Install software updates on your Mac.
    Check USB connections. iOS devices require USB 2.0 to function properly. If you are not sure if your Mac has USB 2.0 ports, refer to the computer's specifications. Disconnect other USB devices, and connect your device directly to a USB port on your Mac.
    Restart your Mac.
    Mac OS X v10.6.8 or earlier only: Reinstall the Apple Mobile Device Service.
    Additional Information
    In rare circumstances, your device may be recognized after reinstalling iTunes, but after you restart your Mac, the device may not be recognized again. If this happens, and you are using Mac OS X v10.6 (Snow Leopard), please follow the steps in this article.

  • Why won't my secure thumb drive (FAT32) work with os lion?

    Why won't my secure thumb drive (FAT32) work with os lion?  I have used it ok with older mac operating systems.  When the thumb drive is inserted in the usb port, an error message appears stating that the disk was not ejected properly.  It shows as readonly in Finder.  When I try to eject it, the spinning wheel appears and I have to relaunch finder.

    Hi princessmonsta,
    Thanks for using Apple Support Communities.  This article has some information on things to check if your sound is not working as expected that may help:
    OS X Mavericks: Adjust your computer’s sound output
    http://support.apple.com/kb/PH13908
    Cheers,
    - Ari

  • Why won't all of my smart playlists sync from itunes to my ipad?

    Why won't all of my smart playlists sync? They show up in the playlist screen of my ipad music app. When I click on the playlist, there are no songs listed. I sync it again, and the playlist now shows zero songs in the list. I keep trying to sync it, and it goes back and forth from showing there are 60 songs in the playlist, which I can't play, to showing zero songs. Please help.

    Yes, sorry, you are correct, it was iTunes Match. I purchased storage on iTunes Match (probably a bad idea), because I had over 1000 songs on my i-phone 4S -which is eating up my storage space. Well, anyway...After I purchased it, I followed the instructions: go to: Settings, "open" music, "Turn on" iTunes Match. After I did that, I opened up the Music App -on my phone -ALL of my playlists were gone and only 208 songs showed... I messed up my phone once before and I had to log into my i-Tunes account (on my computer) and "reset" to another date. I would like to do that again -if possible...
    Please help!

  • Why won't my computer's address book sync ALL of my contacts with my iPhone?  no MobileMe, no iCloud, just straight from computer to phone.

    Why won't my computer's address book sync ALL of my contacts with my iPhone?  No MobileMe, no iCloud, just straight from computer to phone.  I have checked all the settings and all seems correct.  It simply won't pull in all of the contacts.  Last time, it added some new ones, but deleted others.

    I found the route of the problem! All the songs under 'On This Phone' are completely grayed out! The only question is now how do I ungray them???

  • Why won't my iPhone 4 on iOS5 sync updated apps from the iTunes store?

    Why won't my iPhone 4 on iOS5 sync updated apps from the iTunes store?

    Did you by any chance sync the phone to a different computer that uses a different Apple ID?

  • Why won't Family Locator find a precise location with iPhone 5S? I set it up and it says it can only provide an area location.

    Why won't Family Locator find a precise location with iPhone 5S? I set it up and it says it can only provide an area location.

    lewismatt
    Great question! This is a feature not available yet in the iphone devices. Precise location is not available, only course location. Learn more about the feature https://wbillpay.verizonwireless.com/vzw/nos/safeguards/SafeguardProductDetails.action?productName=familylocator .
    JorgeO_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Does anyone know why my music won't play on my 7th generation iPod nano? I tried resetting it already and that didn't work. Can someone please help?

    Does anyone know why my music wont play on my 7th generation iPod nano? I've tried resetting it already but that didnt work. Can someone please help.

    I would to a Restore.  Select the iPod in iTunes.  Go to the Summary tab for the iPod.  There is a button there to do a Restore.  This will erase the iPod, re-install its software, and set it to default settings.  After Restore complete, try playing songs on the iPod again.
    If THAT does not fix the problem, and it's not bad headphones (since you also tried the "speaker"), there is probably a hardware problem on the iPod.  All 7th gen nanos are still under warranty.  If you have an Apple Store nearby, you should take it to the store's Genius Bar.  To minimize waiting, you can make a reservation on store's web page.
    http://www.apple.com/retail/

  • HT2729 My 7th generation iPod nano won't allow me to sync videos from iTunes. How can I fix this?

    My 7th generation iPod nano won't allow me to sync videos from iTunes. How can I fix this?

    What video content works with iTunes and mobile devices?
    iTunes:
    Video content purchased from the iTunes Store.
    QuickTime and MPEG-4 movie files that end in ".mov", ".m4v", or ".mp4" and are playable in QuickTime Player.
    Video podcasts.
    iTunes Digital Copies.
    iTunes Store Movie Rentals (Requires iTunes 9 or later).
    Mobile Devices:
    Video content purchased from the iTunes Store.
    Videos that have been shared to iTunes using QuickTime Player (Mac OS X v10.6 Snow Leopard).
    Videos that have been re-encoded for iPod with QuickTime 7 Pro.
    Videos that have been re-encoded for iPod with iMovie, Final Cut Pro, and others. Refer to Exporting a movie from iMovie HD to iPod for an iMovie HD tutorial.
    Video Podcasts that have been created for mobile devices.
    Video files after using the iTunes File > Create New Version > Create iPod or iPhone version option.
    Video files after using the iTunes File > Create New Version > Create iPad or AppleTV version option (iPad and AppleTV only).
    See below for detailed movie specifications.
    iTunes  Store Movie Rentals (Requires iTunes 9 or later).
    Does the video need to be encoded in a special way?
    All mobile devices which iTunes can sync video to can play the following video formats:
    H.264
    File formats: .m4v, .mp4, and .mov
    Video: Up to 768 kbits/sec, 320 x 240, 30 frames per second (fps), Baseline Profile up to Level 1.3.
    Audio: AAC-LC up to 160 kbits/sec, 48 Khz, and stereo audio.
    MPEG-4
    File formats: .m4v, .mp4, and .mov
    Video: Up to 2.5 Mbits/sec, 480 x 480, 30 fps, Simple Profile.
    Audio: AAC-LC up to 160 kbits/sec, 48 Khz, stereo audio.
    Other formats may be supported by newer devices. The technical specifications can give additional details.

  • Why does the 7th generation ipod nano not have games

    I want to know why the 7th generation ipod nano does not come with:
    1- games
    2- voice memo

    1. The iPod Nano runs the Pixi operating system, not iOS and has too small a screen for displaying the game and controlling it.
    2. Plug in a headset with a microphone: http://manuals.info.apple.com/en_US/ipod_nano_user_guide.pdf page 46.
    3. Ignore the answer from AppleRulesTheWorld

Maybe you are looking for

  • Need to add customer fields in CRM_DNO_MONITOR

    Hi Experts , Using EEWB i created few customer fields in CRMD_ORDER. Now same fields i am adding in CRM_DNO_MONITOR. I enhanced standard program "CRM_DNO_SERVICE_MONITOR" for CRM_DNO_MONITOR. Added new selection screen for customer fields. Now i can

  • Bookmarks and Stylesheets

    Hi, We upgraded our system recently from BW 3.1 to BI 7.0(Only Technical). As of now still we are using old Bex Toolset( New Bex suite yet to upgrade). So we have Portal in place where in users create their own bookmarks and favourites.So After upgra

  • Oracle EPM 11.1.1.3 - Assign Access Control in Shared Services for filters

    We are using 11.1.3 version of EPM. We have configured Essbase with Shared Services. When I try to click Assign Access Control , it gives "loading.." thats it. Nothing else. I have registered the application from EAS with Shared Services Could you pe

  • Intercompany third party and sto

    Hi sd gurus, Am i a stage to goto clients place plz send the documents or screen shots for the above,with theoritical explanation,so that i can get confident on him.Plz kindly send to my mail id [email protected] had learned a lot from sdn sd gurus.p

  • Stock display with Alternate unit of measure

    Hi All, is there any report in SAP, which displays the warehouse stock with Alternate Unit of measure. I did try in MB52. It was showing only in BUM. Please help ASAP. Ayesha