Why won't Airport Utility recognize my Airport Express? I'vetried re-booting router, Modem, reset button etc. It was working fine until I was asked to do an update. I got the Airport Express to stream Itunes to external Audioengine 5 speakers. 3 hrs!

I have tried everything for over 3 hrs. I purchase really good Audioengine speakers and an Airport express. Everything was streaming fine via Itunes until I was prompted to do an update yesterday. Now Airport Utility won't recognize the Airport Express. I tried everyhing. I have an older Mac desktop and simply wanted to stream music to the remote speakers. I tried reet button on the Airport express, re-booted my computer, modem, wireless router. Help!

Be sure you performed the "hard reset" correctly. The following is an excerpt from Resetting an AirPort Base Station or Time Capsule FAQ
Press and hold the reset button with a pen or pencil until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
Release the button, and the AirPort Base Station or Time Capsule will hard reset.
... but read the entire document to ensure you do it correctly. An Express that has been "hard reset" will create an open network with the name "Apple Network nnnnnn" where nnnnnn = the last few digits of its MAC address. Select that network.
If you do not see the network in your Mac's Wi-Fi menu with that name, the "hard reset" did not take effect, which will happen if you do not hold its little reset button depressed long enough. In that case do it again.
Following the "hard reset", reconfigure your Express.

Similar Messages

Can' open certain articles on racer x. It was working fine until 9/24/12. Maybe it is related to the software update IO S6

I have experienced issues on certain web sites not being able to open some articles. Everything worked fine until 9/24/12. Perhaps it is related to the software update IOS 6.
The web site I open a lot is Racer X and that is where I have the issues!
Anyone any suggestions or have the fix for it?

Reinstall Safari 5.1.1
If that doesn't help install the Mac OS X 10.6.8 Update Combo. It's ok to do this even though you are already running v10.6.8.
Restart your Mac after installing software.

My mail was working fine until yesterday. Now it says that mail connects to the internet - but something wrong with the ports. I have spoken with talktalk - they can't help, Ithe major problem being that I have forgotten my password!

Hi, I'm working on an Imac, yesterday email was working fine, now nothing is happening. It says that I need a password to check details - this I can't remember, it doesn't seem to be the same as the one I use to log on to mail through browser (talktalk) - message says can connect to internet but error with port settings etc which need verifying. Talktalk unable to help further - but as I can't get past password page I am very stuck. Any one help as to how to find out password.... have tried to make a new account but that doesn't seem to wrok either. Am wondering if fault is with computer. Thanks.
imac 10.10.1

TalkTalk E-mail Setup See post by Csound1

I upgraded my computer to lion a few weeks ago and it was working fine until yesterday I started realizing that I couldn't do the same things like I could on snow leapord and today I tried downgrading because Facebook started to not work because of lion.

Now when I realized I couldn't downgrade that easy I tried to restart my computer and I held down c but then I realized I didn't save my documents and other things I let go and then it tried to get me to start from scratch so I held down the power button and now that I'm trying to restart it, it just sits on they gray start up screen with the loading Pinwheel and it's been her for about 20 minutes!! How do fix it?? Thanks for everyone's help!!

So you did a force quit and now you are trying to start it again right?
If so and the "beachball of death" is still spinning, deny the machine it's power source, remove the power cord and the battery and any periphials you have plugged in ie: extra drives etc. Let it rest for a minute plug it all back in then try re-starting in safe mode. If all is well shut down and restart normally.
If you get this far repair the disk and permissions using Disk utility.
Hope this helps
here is a link for the safe mode start-up: http://support.apple.com/kb/ht1455

I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. C

I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. Suddenly, the "timeout" is not allowing me to connect to my wireless network.

It could be that there's a new source of interference.
Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees:
http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
By the way, you've been misled by the poor field labeling into trying to type your entire message into the subject field, instead of putting a one-line topic description there.

HT1459 I did an update on my ipod touch, now it says it is in restore mode. i don't want to lose my info, but my ipod won't do anything now. thanks itunes; it was working fine until i did the update you said i needed. what do i do now??????

I did an update on my ipod touch, now it says it is in restore mode. i don't want to lose my info, but my ipod won't do anything now. thanks itunes; it was working fine until i did the update you said i needed. what do i do now??????

No one here said anything about an update or your device needing it.
FYI, you are not addressing Apple here, we are all users like yourself.
If the device is in recovery mode, the only option is to restore it. All data on the device is gone. This should not be an issue if the device has been used as designed and regularly synced/backed up.

Hi, I have a freecom 1TB hard drive which was working fine until it froze. I pulled it out (mistake I now know) and now it doesn't mount. It shows up in Disk Utility but won't manually mount. When I try to repair it gives message 'failed on exit'. hel

Hi, I have a freecom 1TB hard drive which was working fine until it froze. I pulled it out (mistake I now know) and now it doesn't mount. It shows up in Disk Utility but won't manually mount. When I try to repair it gives message 'failed on exit'. Some people have said to try Disk Warrior, but at $100 it's quite expensive maybe fix. help!

You likely need to reformat the drive which will destroy all data and you need a backup to restore it. If no backup is present then a data retrieval service can be more expensive than DiskWarrior. There is software that can rescue the data but I can not vouch for it's effectiveness as I have always maintained backups. .
http://www.prosofteng.com/
http://www.wondershare.net/ad/data-recovery-mac.html?gclid=CLTp3Mj07rkCFevm7AodL lUAHw
http://diskdoctors.com/software/mac-data-recovery/utility.asp?gclid=CMyf_MH17rkC Fcvm7AodSE0A8A
http://www.cleverfiles.com/

My itunes was working fine untill i tried to download the most current version of itunes. now it wont boot up and has error messages,error7(windows error 126) and MSVCR80.dll

my itunes was working fine until i tried downloading the most current version of itunes, now when i try to get on my itunes library, it wont boot up and has error codes, error 7, and( windows error 126). it also says that MSVCR80.dll is missing from my computer,please re install itunes. but when I try to re install it it will not install on my computer.

See Troubleshooting issues with iTunes for Windows updates.
tt2

Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an erro

Hi there
I ha
Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an error is there a way to get the phone working again please.

Shame you had the iPhone hacked as O2 usually unlock their customers iPhones happily.
We cannot discuss your problem as it is in breach of the Ts&Cs you agreed to on registering
However hint ....you have probably trashed it

I keep the itunes encountered a problem and needs to shut down . it was working fine until after i updated to 10.5 can someone plz help

i keep the itunes encountered a problem and needs to shut down . it was working fine until after i updated to 10.5 can someone plz help

I did get a "server busy" message when I loaded quicktime, but I'm not sure if it is related or not since I've been seeing that over the last couple of days, I can't remember if it came before iTunes stopped working or not. That message reads "This action cannot be completed because the other program is busy. Choose 'switch to' to activate the busy program and correct the problem." My options then are to choose switch to or retry. When I press "switch to" my Start menu opens, and nothing appears to happen when I select retry.
that's an odd sort of a message (or series of messages).
hmmmmm. let's try an experiment aimed at working out if there's a program interfering with the QuickTime (which is in turn causing grief with your iTunes).
try a selective startup using MSCONFIG, with just the itunes and QuickTime background processes enabled, as per the following document:
Using MSCONFIG to troubleshoot conflicts in Windows
does QT open without the strange message after the selective startup?
does iTunes launch properly?

A friend's eMac was working fine until the name of the administrator was changed incorrectly in Systems Accounts

I am trying to fix a friend’s eMac. It was working fine until the name of the administrator was changed incorrectly in Systems Accounts. Upon restart the computer failed to mount. I tried to reinstall Tiger and could not. The destination to do this install could not be found. While in Disk Utilities I tried to repair and then zero out erase the hard drive, this also could not be successfully done. The hard drive was working perfectly before the name change. I may try to load Tiger from the eMac onto an external drive and then hope to erase the eMac internal drive.
Thank you for your thoughts on this as it would be a shame to retire this trusted computer.
Nick M.

Hello,
Thank you very much for your attention to this. Yesterday I was able to get the eMac to install Leopard onto an external drive. I had hoped that once done I would be able to initialize or erase the content of the internal drive in Disk Utility, but was not able to do so, I only received error messages telling me my request failed. This was also true when I tried to create partitions on it. So in effect, the computer runs, but only from the external drive. I could not even find the internal drive while running from the external drive. Where is it? And the internal drive only occasionally shows up in Disk Utility.
As for holding Option and Alt, the internal drive did not show up.
And Leopard was running on the eMac when I lost contact with it. Again, all failed when a name of the administrator was changed, but was not properly done. Or something like this.
Is there anyway I can use Terminal to help reach the internal drive?
I realize I am asking a lot of questions.
And I thank you for your time,
Nick M.

My ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

my ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

- Charge the iPod for half an hour. Then reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- if still not working, connect to your computer. If iTunes sees the iPod, restore the iPod.
- If still problem, place the iPod in recovery mode and then try to restore the iPod. For recovery mod see:
iPhone and iPod touch: Unable to update or restore

HT204074 I have just changed my iPad mini password a day ago when trying to log on today it worked fine until about 4:30 (GMT) when I could not access the device using the correct password. I am absoloutley 100% sure it's correct. Any help?

I have just changed my iPad mini password a day ago, and when trying to access it today it worked fine until about 4:30 (GMT) when I could not access the device using the correct password. I am absoloutley 100% sure it's correct.Additional details:I was last using Kik messenger before it stopped working.I was sitting less than two foot away from the PS3 my brother was playing.I'm 14 but I'm not some spoilt kid who gets iPhones and iPads from his parents to mess around with, I have got important coursework and homeworks on there.Any help would be great Thanks.

Hello ConfusedLlama
If the password is not working to get into your iPad mini, you would need to follow the steps to restore it. If you have a back up through iCloud or through iTunes, you can restore from that back up and it would not bring back the passcode unless it is encrypted.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Regards,
-Norm G.

IPhone 4S was working fine until recenty after updating the software to the 5.1 version

My iPhone 4s was working fine until I recently updated the software to version 5.1, now it locks up on nearly any screen and reverts back to the main screen. Even in settings, if I go in a few tabs in settings all of a sudden it takes me back to the main screen. I have done a total reset on the phone and it has not helped.
Also, it is now completely frying the battery goes from 100% to 35% in about 4 hours. I have killed all apps running and it is still hot and using up the battery.

I have done all of the above suggested restart, reset and restores using iTunes and without. No luck.
What I have found is that under Settings; General; About; Diagnostics & Usage; there is an error message populating every single minute that says low memory. It appears that the reset back to the main screen coincides with this error message. I have very little data stored on the phone, 13 Gig available.
How does one go about emptying this memory?

Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

Sign into iCloud pop-up message on iPad2 won't disappear off screen, have reset password multiple times but it is saying incorrect. Please HELP unable to use iPad as message appears every few seconds, iPad was working fine until now.

After the restore did the phone work properly for a while? Say, a day or so?
If so it is possible you have an app that doesn't let go of memory properly. I reboot my iPhone ( hold sleep/wake and hole till you see the apple logo) every few days. This resets the memory. The iPhone OS has doesn't seem to mange memory very well yet. So a reboot will help with that. I have had my phone almost slow to a stop before I started rebooting. Always reboot after installing a new app. Also do you close all pages in Safari when you are done? This is a good practice. Safari will run in the background and use processor time and drain your battery quicker. Create a new blank page then close all others when you are done browsing for a while. I have also found that certain web site that have animated images like weather maps will turn the phone into molasses. As soon as i close that page it gets faster.
If all of the above have no effect then as Tamara said it is time for a trip to the Genius bar.
Good luck

Why won't Airport Utility recognize my Airport Express? I'vetried re-booting router, Modem, reset button etc. It was working fine until I was asked to do an update. I got the Airport Express to stream Itunes to external Audioengine 5 speakers. 3 hrs!

Similar Messages

Maybe you are looking for